Used Vce for sale (60)

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and stepless feed, in very good condition. Accessories, CE compliant. Technical data: >> Year of manufacture 1992, machine no. 2102-7007 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes Gsdpfx Akjzl Ebbsajkb >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head, adjustable on spindle head by 100 mm >> Vertical and horizontal quill - SK40 >> Clamping system M16 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Machine lamp >> Operating manual, parts list >> Tool holders, vise, counter holder About the machine: Offered is a Deckel FP1 universal milling machine in very good condition and CE compliant. The machine has very little backlash and all spindles move easily. Even at maximum speeds, the milling machine runs very smoothly. A special feature is that the control cabinet is connected to the machine with a plug. This makes it easier to transport the machine. In this newer FP1 model, the feed is steplessly adjustable in three axes, and the machine also has rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain positioning control, you can enter dimensions that the machine will automatically move to. The FP1 was used in a training workshop, where it was only used occasionally. An oil change was performed. Mechanically and electrically tested. The digital display from Heidenhain makes working easier and even more precise. Take advantage of the opportunity to inspect and test this machine on site under power.

Condition: used, Year of construction: 1992, faceplate diameter 1250 mm swing diameter 1400 mm turning height 980 mm table load 3 t Control Siemens type Sinumerik 880T x-axis 1000 mm z-axis 1000 mm w-axis 600 mm c-axis 360 ° Tool changer 62 Pos. grinding head horizonzal grinding head vertical power capacity - table 69 kW weight of the machine ca. 26 t dimensions of the machine ca. 8,7x7x5,2 m • Table speed / Drehzahl der Planscheibe: 2 Getriebestufen, Drehzahl = 4,5 – 500U/min • Ram section / Stößel Querschnitte: 240mm x 240mm • Live tools speed / Drehzahl der angetriebene Werkzeuge: o Schleifspindel waagerecht: 3000U/min o Schleifspindel senkrecht: 3000 – 6000U/min o Fräsen: 10-2000U/min • Live tools power / KW Leistung der angetriebenen Werkzeuge: o Schleifspindel waagerecht: 3kW o Schleifspindel senkrecht: 3kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Gedpfx Akjyt Rzdoaekb If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 1993, condition: ready for operation (used), Vertical lathe machiningcenter Dörries Scharmann Type: VCE 2000/160 Pallet size: 1.600 mm Pallet load: max. 8.000 kg Number of pallets 13 pcs Table indexing C-Axis 0.001° Table cross travel (X) 2.300 mm Column longitudinal travel (Z) 1.500 mm Crossbeam positions: 9 steps off 100 mm Feed X/Y/Z 1 – 6.000 mm/min. Rapid X/Y/Z 8 m/min. Max rotary diameter 2.000 mm Max workpiece height 1.500 mm Main Spindle Spindle drive motor: 69KW Spindle speed: 2.8 – 315 rpm ATC 70 pots - system 240.2 Live spindle – SK50 Spindle drive motor: 30KW Spindle speed: 10 – 1500 rpm CNC controller Siemens Sinumerik 880M Accessories Gkodpfx Aksgulkijasb FMS 13 pallets Rotary loading stations 2 pcs Coolant unit with filtration system Coolant through spindle Machine weight Approx 40T. Build year 1993 (2/2)

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and stepless feed, in very good condition, CE compliant. Technical data: >> Year of manufacture 1990, machine no. 2102-5046 >> Fixed angular table >> Speed: 40 - 2000 RPM >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle support, adjustable by 100 mm >> Vertical quill and horizontal quill - SK40 >> Clamping system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital display Heidenhain TNC113 Gjdpfx Aszbb E Ajkaskb >> Coolant system >> Machine lamp >> Operating manual, parts list About the machine: Offered is a universal milling machine Deckel FP1 in very good condition and CE compliant. The machine has very little backlash and all spindles move easily. Even at maximum speeds, the milling machine runs very smoothly. In this newer FP1 model, the feed is steplessly adjustable in three axes, and the machine also has rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain control system, you can enter dimensions that the machine will automatically approach. The FP1 was located in a training workshop, where it was only used occasionally. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes the work easier and even more precise. Take the opportunity to inspect and test this machine on site under power.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Active Digital Readout Heidenhain, Excellent Condition, CE Compliant!!! Technical Data: - Year of manufacture: 1992, Machine no. 2203-8449 - Fixed angle table - Spindle speed: 50 - 2500 rpm - Feed rate: 8 – 630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min - Travel (X/Y/Z): 500/400/400 mm - Vertical milling head traverseable on column - Vertical and horizontal quill - SK40 taper Gkjdpfxju Tuk Ho Akasb - Vertical quill extendable by 90 mm - Hydraulic drawbar system - Approx. weight: 1600 kg Equipment and Accessories: - 3-axis active Heidenhain digital readout - Coolant system - Chip tray - Central electric lubrication - Operating manual, spare parts drawings About the Machine: For sale is a Deckel FP4M Universal Milling Machine (Active) in very good condition. The machine has minimal backlash, and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs quietly. The machine features hydraulic tool clamping. The FP4M was only occasionally used in a state-run facility for training purposes. On this newer FP4 model, the feed rates are steplessly adjustable in all three axes, and each axis also features a rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input measurements that the machine will approach automatically. Oil change has been performed; mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: used, Vacuum lifting device for paper rolls, NAGRON AEROLIFT Vacuum lifter for the paper industry Woudenberg, Netherlands, Type R96-20 Manufacturer's No. 9745, Year of manufacture 1999 Load capacity 2000 kg Centering mandrel, Ø 90 mm Outer diameter of suction surface 850 mm (plus seal) Inner diameter of suction surface 250 mm (minus seal) Seal width 50 mm Suction surface area 0.5 m² Vacuum pressure min. -800 mbar Gsdsdzqc Iepfx Akaskb Suction capacity approx. 100 m³/h per vacuum pump Motor power 2 x 2.2 kW Mains connection 400 V, 50 Hz - 2 Rietschle vacuum compressors, Type VCE 100 Dimensions Ø x H 1600 x 2250 mm Height with centering mandrel 2500 mm Overall height in transport frame 2950 mm Weight 2.5 tons.

Condition: new, More technical data on request Standard Features 1,2 mt Roller Table Saw Blade Brush Heavy Duty Gearbox Hydraulc Vce Hydromechnic Blade Tension Security Switch Inverter Control Panel Mechanic Top Clamping Gkjdporz Uy Tefx Akaob Coolant Pump Height  Adjustment Switch Saw Blade 34

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,658 mm, total width: 432 mm, Tested forklift battery for your forklift - 80V 4PZS 620Ah - Special tray 2 + 1-year warranty + Includes aquamatic filling system + Includes end discharge resistor & REMA 320 connector (other connector types can be fitted on request) + Capacity: minimum 90–100% (C5 capacity protocol will be provided upon delivery) + Year of delivery: 2024 Dimensions: Length 1,658 mm Width 432 mm Height 784 mm Weight: approx. 1,550 kg Suitable for the following models and more: Jungheinrich EKX 513 Toyota FBM20 Toyota FBMF16 Toyota FBMF25 Toyota/BT VCE 135 Bradshaw T20 Caterpillar EP20K Caterpillar EP20N Caterpillar EP25K Caterpillar EP25K PAC Caterpillar EP30CN Charlatte T135 Gedpfjy Rnq Sex Akajkb Charlatte T135 EVO Combilift SL Daewoo B22/25 X-5 Daewoo B22/25 XL-7 Daewoo B25 X Daewoo B30 Daewoo B30 X-5 Daewoo B32 Daewoo B35 X Dimos EFY3004 Dimos EFY3504R Doosan B22X Doosan B22X-5 Doosan B25X-7 Doosan B30NS Doosan B30X Doosan B35NS Hubtex MD 30 Hubtex MQ 40 Hubtex MQ 45 Hubtex MQ 60 Mitsubishi FB25 Mitsubishi FB25AN Mitsubishi FB25K PAC Nissan 1Q2L25Q Utiley UT3OPFE Other standard battery sizes available on request. Transport can be arranged.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 32, TECHNICAL DETAILS Travel X-axis: 1,250 mm Travel Y-axis: 500 mm Travel Z-axis: 600 mm Maximum spindle speed: 6,000 rpm Spindle taper: SK 50 Gjdpfoyykhrox Akajkb Spindle cooling: 15 bar Table dimensions: 1,400 x 550 mm Tool changer positions: 32 MACHINE DETAILS Spindle power: 18.5 kW Dimensions (L x W x H): 4,500 x 2,350 x 2,650 mm Note: The machine is sold without vises and tools.

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 540 mm, total height: 29,620 mm, total length: 32,000 mm, total width: 28,480 mm, overall weight: 6,000 kg, controller model: Heidenhain TNC 640, coolant supply: 36 bar, rapid traverse Z-axis: 48 m/min, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rotary table diameter: 380 mm, spindle speed (max.): 12,000 rpm, table load: 200 kg, Equipment: chip conveyor, documentation/manual, Victor 5-Axis Machining Center VC-AX380 with Heidenhain TNC640 Control 5-axis simultaneous machining incl. calibration tool KinematicsOpt incl. calibration ball. Standard options: -Cooling system with high-pressure coolant pump MTH4-40/4 and supply hoses -Full protection coolant cabin -Spindle oil cooler -Oil separator -Spiral chip conveyor -Rinsing gun and air gun -Operating tools and manuals Additional options: -Air through the spindle -Air conditioning unit in the control cabinet -Chip conveyor -40 tools -36 bar ICS with Mahle Duplex -Table rinsing -Workpiece measurement TS460 -Automatic door -Interface -8" 3-jaw chuck Images are exemplary and may differ. From stock Bergneustadt (subject to prior sale) Gkodpfxsq Tafxo Akasb