Used Benfra 135 B for sale (40,160)

Condition: ready for operation (used), Baumüller BUS20-60/135-30-001 built-in power converter SN:91314741, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Dodji D T Huepfx Aa Nscg

Condition: ready for operation (used), Year of construction: 2002, pressing force: 14 t, number of axes: 2, Press brake manufactured in 2002. This HACO PPM 30135 b features a pressing force of 135 tons and a bending length of 3100 mm. It is equipped with a power of 15 kW, ensuring efficient operation. If you are looking to get high-quality bending capabilities, consider the HACO PPM 30135 b machine we have for sale. Contact us for further details. • Power: 15 kW • Voltage: 380 V • Serial number: 90 695 • Control: Conventional CNC/NC press brake • Condition: In working condition Dcjdpfxoy Nc D Do Aa Neg Technical Specification Bending Length 3100 mm

Condition: good (used), Year of construction: 2006, Press force: 135 t Bending length: 2550 mm Frame gap: 2050 mm Control system: CYBELEC ModEva 10 S Total power requirement: 25 kW Machine weight approx.: 11,000 kg Description Machine: – Rigid machine frame as an all-steel welded construction – Ram with high flexural rigidity – Electrohydraulic top drive via proportional valves – Modern block hydraulics Special equipment: – Increased installation height and stroke by 150 mm each – Rear gauge system 2 – 2 axes, R axis adjustment 150 mm – 2 x additional backgauge fingers 2/4 axes, however offset by 20 mm – CNC sheet support device – Distance from bending line to sheet support device approx. 240 mm – EHT quick-release clamping system for EHT upper tools, pneumatic, head width 26 mm, horizontally self-centering – EHT lower tool clamping, receiving width 55 mm, pneumatic – Hardened insert strip for EHT lower tool clamping 55 mm / 90 mm – CNC-controlled die shifting, stepless – CNC crowning system in the table (minimum table width 110 mm), without tool clamping Dcedpfsy H Ilbjx Aa Njg – Safety device SICK V4000 – 2 x bending aids max. 1500 N – 2 x 2 support rails for bending aid with 14 mm T-slot and scale – 2 x table extensions for bending aid – Park position right and left, short

Condition: used, Year of construction: 2006, pressure 135 t chamfer lenght 2550 mm distance between columns 2050 mm control CYBELEC ModEva 10 S total power requirement 25 kW weight of the machine ca. 11.000 kg Machine: - Sturdy machine frame constructed as a fully welded all-steel structure - Pressure beam with high bending strength - Electrohydraulic top drive via proportional valves - Modern block hydraulic system Optional equipment: - Increase in installation height and stroke by 150 mm each - Backgauge system 2 - 2 axes, R-axis adjustment 150 mm - 2 x additional stop fingers 2/4-axes, however, offset by 20 mm - CNC holding device - Distance from the bending line to the holding device approx. 240 mm - EHT quick-clamping device for EHT upper tools, pneumatic, head width 26 mm, horizontally self-centering - EHT lower tool clamping, mounting width 55 mm, pneumatic - Hardened insert strip for EHT lower tool clamping 55 mm / 90 mm - Die shift CNC-controlled, infinitely variable Djdpfx Aoy D T S Iea Nscg - CNC crowning device in the table (table width min. 110 mm) without tool clamping - SICK V4000 safety device - 2 x bending aids, max. 1500 N - 2 x 2 support rails for bending aid with 14 mm T-slot and scale - 2 x table extensions for bending aid - Parking position on right and left, short

Condition: as good as new (ex-display), Year of construction: 2026, 5222454 LIBRA 45/2 RTC 135 Wide Belt Sander 5257433 "Z" Designation for RTC 135 5257452 Vacuum table with electric fan 3 kW 5257453 Oscillating belt air-blast device for 5257454 Oscillating belt air-blast device for 5257462 Reinforced motor 15 kW (20 HP) 5257485 Roller table at infeed and outfeed for 5257499 Grooved rubber pressure roller, 2nd position 5257500 Grooved rubber pressure roller, 3rd position 5257504 Infinitely variable conveyor feed with inverter 5257605 Door with inspection window 5257606 LED lamp for internal illumination TECHNICAL DATA Dimensions and Weights Length (product) approx. 1800 mm Width/depth (product) approx. 2000 mm Height (product) approx. 2070 mm Extraction Connection Number of extraction ports: 2 Extraction port diameter: 200 mm Electrical Data Feed motor power: 0.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Height adjustment motor power: 0.25 kW Output power (motor power): 11 kW Sanding Unit Sanding belt length: 2150 mm Sanding belt width: 1370 mm Max. sanding width: 1350 mm Feed Unit Feed speed: 4.5 / 9 m/min Workpiece Min. workpiece height: 4 mm Max. workpiece height: 170 mm Product Information EU 2023/2854 Type of generated data: usage data Dodpjy Ehiwjfx Aa Njcg Format of generated data: common, machine-readable formats, e.g., JSON Data volume: up to 5 MB Continuous real-time data generation: yes Data storage location: on the device and a remote server Data access: on the device and via physical and wireless interfaces Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Press Brake Brand: LVD Capacity: 3000 x 135T Model: PPBL 135/30 Distance between uprights: 2550 mm Dedpfox Tqt Uox Aa Necg Throat depth: 200 mm Stroke: 130 mm Working speed: 8 mm/s Number of backgauge axes: 2 Motor power: 8.5 kW

Condition: used, mileage: 1,35,531 km, power: 309 kW (420.12 HP), first registration: 07/2018, fuel type: diesel, tire size: 315/80r22,5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, color: green, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2018, Equipment: electric window regulation, Technical information Dcjdpfsyh Nlzex Aa Njg Number of cylinders: 6 Engine capacity: 12.419 cc Drivetrain Drive: Wheel Engine type: MAN D2676 LF Axle configuration Tyre size: 315/80r22,5 Front axle: Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Weights Empty weight: 7.000 kg Carrying capacity: 12.000 kg GVW: 19.000 kg = Additional options and accessories = - PTO

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Hydraulic press brake LVD PPEB-5 135/4000 CADMAN CNC Year of construction: 2004 Dcedpey Avptsfx Aa Nsg Serial number: 29443 Technical specifications Force: 1350 kN Working length: 4000 mm Distance between uprights: 3150 mm Stroke: 200 mm Distance table – ram: 400 mm Gap: 400 mm Table width: 150 mm Approach speed: 130 mm/s Working speed: 12 mm/s Return speed: 115 mm/s Weight: 11,500 kg Motor: 15 kW COMMAND CONTROL CADMAN CNC 5 axes • Table PP8170 V-axis • 2 front supports PP1110 • Wila top tool clamping – hydraulic PP3100 • Back gauge X -R -V • Distance reach X axis: 600 mm • Lasersafe security guard CE

Condition: used, mileage: 1,35,986 km, power: 265 kW (360.30 HP), first registration: 07/2023, fuel type: diesel, empty load weight: 7,170 kg, maximum load weight: 10,830 kg, overall weight: 18,000 kg, tire size: 315/70 22,5, tire condition: 70 %, axle configuration: 4x2, next inspection (TÜV): 08/2026, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2023, operating hours: 1,35,986 h, front tire size: 315/70 22,5, rear tire size: 315/70 22,5, Equipment: ABS, air conditioning, airbag, cruise control, navigation system, parking heater, truck registration, Reference number for inquiries: 40977 Mercedes-Benz 1836 * Year of manufacture: 2023 * ABS (Anti-lock Braking System) * EBS (Electronic Braking System) Dcodsy D Dqzjpfx Aa Njg * Automatic climate control * Refrigerated compartment * Air suspension * Navigation system * Auxiliary heating (parking heater) * Cruise control * Full aerodynamic spoiler kit * Long-haul transport > 7.5 t * CB radio * Lane keeping assist * Refrigerator * Airbag * Electric windows and mirrors * Central locking with remote control * Inspections: General Inspection (HU) / Emissions Test (AU) valid until 08/2026 * Transmission: Automatic * Suspension: Leaf/Air * Gross vehicle weight: 18,000 kg * Unladen weight: 7,170 kg * Payload: 10,830 kg * Permissible gross weight: 18,000 kg * Tire condition 1st axle: 70% – 70% – Tire size: 315/70 R22.5 * Tire condition 2nd axle: 70%|70% – 70%|70% – Tire size: 315/70 R22.5 * Tire sizes: 315/70 R22.5 * MB Actros 1836 * Full aerodynamic spoiler kit * High beam assist & cornering light * Attention Assist * Autonomous emergency braking assistant * Lane keeping assist * Interior package chrome * Upon request, we can provide you with a video and additional images Disclaimer: Specifications subject to change, prior sale and errors excepted. More pictures and videos are available on our website. Our comprehensive range of services includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, uncomplicated financing solutions * Arranging all (export) documentation * Order of export or customs licence plates * Vehicle preparation: new tarpaulins, signage, paintwork etc. * Professional loading and load securing * TÜV certifications, vehicle registration service * Transportation of commercial vehicles Please consult our trained specialist staff – we are happy to advise you.

Condition: good (used), functionality: fully functional, Coil weight 350 kg Max. strip width 200 mm 11-roller straightening unit Roller diameter 60 mm 2 feed rollers 2 exit rollers Dedpfx Aaey Ah Ets Njcg

Condition: excellent (used), Year of construction: 2006, Single-screw extruder Battenfeld BEX 1-75-30:B with co-extruder BEX 35-30:B Application for PE, PP Year of manufacture 2006 Screw RPM 220 Screw diameter 75 mm Drive Baumüller 205 KW, RPM 2.450 Total output approx. 850 kg/h The extruder was converted to frequency drive by Battenfeld in 2014, new three-phase motor and frequency converter Gearbox was overhauled in July 2024 Condition: it is in very good condition Last application PE pipes Dedpfx Aaeug Edke Necg Battenfeld co-extruder BEX 1-35-30:B Application PE PIPES Screws RPM 240 Connection value: 69 Kva Drive 35 KW Output approx. 120 kg/h Year of manufacture: 2010 The extruder is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6 Germany

Condition: used, Year of construction: 2021, operating hours: 161 h, machine/vehicle number: SX135H-557, mast type: telescopic, fuel type: diesel, Empty weight: 21.731 kg Lifting capacity: 454 kg Working height: 4.315 cm Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Outrigger Max. horizontal reach: 2743 m Transport dimensions (LxWxH): 19.76x2.49x3.05 Dcjdpsyvn Tkefx Aa Nog Please contact PFEIFER GROUP for more information

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 153200 € 2895.48 € 1350 mm 0,4 - 120 mm 1370 x 2200 mm 6000 m³/h 150 mm 6 bar 4200 mm 2300 mm 2350 mm 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP * Machine made of stress-free welded steel construction for stable and rigid structure * Work table with motorised height adjustment via 4 synchronised spindles. * Independent drive motors for each work group. * Hoods for extraction inside the machine, one per station. Touch screen for: * Automatic star-delta connection of the main motors * Digital display for sheet thickness with decimal point tolerance * Material thickness adjustment (+/- 0.1 mm) * Machine condition monitoring with alarm messages FEEDING SYSTEM * Robust steel structure, wear-resistant surface. * Vacuum conveyor belt on request * The table raises and lowers from 780 mm to a maximum height of 950 mm above the floor. The power of the motor for height adjustment of the table is 0.25 kW. * Maximum permissible weight on the table: 140 kg. * Variable feed speed via frequency converter 0,4 to 4,5 m/min, Option 0,2 to 2,0 m/min or 0,6 bis 6,0 m/min. * Rubber conveyor belt, oil and temperature resistant. * Lateral guides to prevent the belt from lifting off. * Rubber pressure rollers in front and behind each station, oil and temperature resistant. * Automatic centring device for the conveyor belt * Automatic servo cooled motor * Speed motor on the main touch screen 1 TH R GROUP DEBURRING WITH ABRASIVE BELT * Rectified and balanced contact roller with 180 mm diameter. Coating of oil and heat resistant nitrile rubber. Standard roller hardness 55° shores. Mounted on an eccentric shaft that allows to control the working position and compensate the abrasive belt wear, with a range of 8 mm. This system is controlled by a pneumatic cylinder that allows the automatic insertion of the group into the work and, in case of emergency and/or machine stop, the immediate removal of the sanding belt from the working point. It is possible to insert sanding belts and/or Scotch Brite. * Pneumatic on-off switch. * Roller adjustment up-down "grain" stroke 10 mm * Variable speed motor 11 kW with automatic braking in case of emergency. * Rotation speed in feed direction 4 - 18 m/s. * Width and duration of the oscillation setting. * Pneumatic tensioning system for the abrasive belt. * Sanding belt centring system, with electronic photocell, Oscillation adjustment in width and time. 2ND GROUP ROTATING BRUSH UNIT * 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. * Each brush has a diameter of 350 mm and a length of 530 mm. * Motorised raising and lowering of the group to regulate the pressure of the deburring. Dcodpfx Ajynmw Roa Nog * Variable speed motor 1,5 kW. * Variable speed group electronic inverter 6 - 12 U/min. * Brush motor with variable speed, power 6 kW (4 x 1,5 kW). From 300 to 900 U/min. * Speed programmable control and display on the electronic touch screen. CONTROL OF THE THICKNESS AND THE BRUSHES * Motorised table lifting with fine adjustment via 4 precision screws with ball bearings * Maximum operating pressure 120 mm * Pressure motor power kW 0,75 * Pressure adjustment via touchscreen CONVEYOR BELT CLEANING Brush system in nylon canvas for cleaning the conveyor belt (length 1350, Ø =150 mm), located at the back of the machine under th...

Condition: good (used), Year of construction: 1997, functionality: fully functional, Used 3-meter CNC press brake from LVD Type: PPEB 135 30 Capacity: 3100 x 135 tons MNC 95 CNC control CNC controlled axes: Y1, Y2, X, R, Z1, Z2, and XDelta CNC crowning Hydraulic upper tool clamping by WILA 1 set of tools Dcedpfsytb Sajx Aa Nsg

Condition: used, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 03/2015, Equipment: ABS, * Fliegel 2-axle tandem trailer * TPS 135 * Curtain-sided body Dcodoyx R Ehjpfx Aa Nsg * Air suspension * SAF axles * Downrated to 10 t / Technically possible 13,500 kg * Unladen weight 3,615 kg

Condition: used, mileage: 30,800 km, power: 309 kW (420.12 HP), first registration: 08/2012, fuel type: diesel, empty load weight: 12,420 kg, maximum load weight: 5,580 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 5,300 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: air, loading space length: 6,200 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, trailer coupling, Scania R420 4X2 Flatbed with Crane First registration: 08/2012 Only 30,800 km with documentation!!! Engine operating hours counter: 1,632!!! CR19 long cab with single bunk Euro 5 emission standard Manual transmission Trailer coupling Air conditioning, auxiliary heating Wheelbase: 5300 mm Full air suspension Tyres: 295/60 R22.5, tread approx. 60% Platform length: 6,200 mm Dropside height: 600 mm Loading height from ground to top edge of platform: 1,100 mm Unladen weight: 12,420 kg Dcodpfx Aeyymy Roa Neg Crane: Fassi F135A.2.26 E-Dynamic Radio remote control Cable winch Total 7 extensions 6 hydraulic extensions + 1 mechanical 2.50 m / 3,800 kg 4.75 m / 2,435 kg 6.60 m / 1,530 kg 8.55 m / 1,025 kg 10.60 m / 725 kg 12.70 m / 540 kg 14.85 m / 435 kg 16.95 m / 365 kg 19.15 m / 275 kg (mechanical extension) Hook height approx. 23 meters The vehicle is from first owner and is in well-maintained condition. Technical Inspection valid until April 2027. Export / net price: 65,900 Euro All information provided without guarantee. Subject to errors and prior sale.

Condition: used, mileage: 30,800 km, power: 309 kW (420.12 HP), first registration: 08/2012, fuel type: diesel, empty load weight: 12,420 kg, maximum load weight: 5,580 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 5,300 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: air, loading space length: 6,200 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, trailer coupling, Scania R420 4x2 Flatbed with Crane First registration: 08/2012 Only 30,800 km, documentation available! Engine operating hours: 1,632! CR19 long cab with one bunk Euro 5 emission standard Manual gearbox Trailer coupling Air conditioning, auxiliary heater Wheelbase: 5,300 mm Full air suspension Tyres: 295/60 R22.5, approx. 60% tread Flatbed: 6,200 mm Sideboards: 600 mm Loading height from ground to top edge of flatbed: 1,100 mm Unladen weight: 12,420 kg Crane: Fassi F135A.2.26 E-Dynamic Radio remote control Winch 7 extensions total 6 hydraulic extensions + 1 mechanical Dcsdpfx Aaoyymy Do Nsg 2.50 m / 3,800 kg 4.75 m / 2,435 kg 6.60 m / 1,530 kg 8.55 m / 1,025 kg 10.60 m / 725 kg 12.70 m / 540 kg 14.85 m / 435 kg 16.95 m / 365 kg 19.15 m / 275 kg (mechanical extension) Hook height approx. 23 meters The vehicle is from first owner and in well-maintained condition. TÜV valid until April 2027. Export/net price: €65,900 All information without guarantee, subject to errors and prior sale.

Condition: used, mileage: 3,05,605 km, power: 300 kW (407.89 HP), first registration: 12/2018, fuel type: diesel, number of seats: 63, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, Year of construction: 2018, Equipment: ABS, air conditioning, cruise control, = Additional Options and Accessories = - DVD - Front refrigerator - Retarder - Sleeper cabin - Toilet - USB connections - Webasto heater Dsdeyy N Siepfx Aa Nocg = Further Information = Height: 370 cm Damages: none = Company Information = We are an international company based in Belgium, located near Brussels (+/-20 km). Belgian Bus Sales is your ideal partner for purchasing and selling used buses, featuring an extensive lot that serves as our display area. We always have a wide selection of buses in stock, from all brands, capacities, models, and price ranges. We can help you find the right coach, school, or city bus tailored to your requirements and budget. All information is provided without guarantee. Errors, prior sale, and typos excepted. Business hours for used bus inspections: Mon-Fri: 08:30 - 12:00 / 12:30 - 17:00. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more.

Condition: new, pressing force: 135 t, operating speed: 10 mm/s, reverse speed: 130 mm/s, table height: 940 mm, overall weight: 7,750 kg, MVD SERIES B - 3,100x135Tn SERIES B - 4 Axes Large press brake for achieving outstanding bends and flawless workpieces Dcjdpfx Asxfzpzsa Njg The body and upper beam are of steel construction, designed according to minimum and optimum strength criteria. Model: B135/3100 Bending force: 135 tons Bending length: 3100 mm Distance between uprights: 2600 mm Ram stroke: 260 mm Daylight: 465 mm Throat depth: 410 mm Table height: 940 mm Length x Width x Height: 4690 x 2340 x 2980 mm Approach speed: 210 mm/s Return speed: 130 mm/s Bending speed: 10 mm/s Oil tank capacity: 180L Main motor: 11 kW Weight: 7,750 kg Standard features: CNC 3 axes Y1, Y2, X 260 mm stroke, 410 mm throat depth ESA S630 CNC control unit ± 0.03 mm precision SERVO-driven, motorized rear gauge X = 750 mm Promecam quick-release punch holder Sliding front sheet support arms Special narrow bottom table by MVD (European type) GIVI optical linear scales Standard punch tooling (H: 67, 850 R:08) Standard die tooling (60x60 mm, 4 Vee V=16-22-35-50 mm, 85°, H:60) LED lighting in RAM Optional features: Choice of X-axis backgauge options with 2-4-6-8 stops Wide bottom table for Multi Vee forming dies Anti-deflection crowning with original Wila wedges AKAS or DSP front laser safety systems Additional backgauge fingers Front laser safety

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Technical Specifications Protection Laser CNC Bending Table CNC Axes: Y1/Y2/X/R Manual Axis: Z1/Z2 Split Toolless CYBELEC CYBTOUCH 12 Graphic CN ALMOST NEW CONDITION Features Motorized Backgauge Stroke: 800 mm Working Height: 900 mm Main Motor Power: 11 kW Weight: 7900 kg Oil Capacity: 200 liters Folding Length: 3100 mm Power: 135 T Gooseneck: 400 mm Distance Between Columns: Dcedpev Tz Ukefx Aa Njg 2600 mm Sliding Stroke: 275 mm Approach/Working/Return Speeds: 200/10/120 mm/s Backstop Speed: 230 mm/sec Table slider clearance: 550 mm Table width: 90 mm Machine dimensions L x W x H: 4250 x 2050 x 2700 mm

Condition: new, pressure: 135bending length: 3020column width: 2555daylight: 550stroke lenght (max.): 320column throat depth: 450messurements (LxWxH): 3745x2250x2835weight approx.: 93004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S630 (2D Grafik Steuerung)motor power: 15 Standard equipment: KK Kletzer Europe Dcedpfx Aasd Ehinj Njg We have put together a high-quality model for Europe. The CNC press brake KK kletzer Made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X and R CNC axes via the control. Of course, the CNC crowning control Esa S640 (2D graphic control) is also included. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X and R axis Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw Motorized crowning device with CNC control 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Other controls: ESA 640 2D 15'' touch screen control                                                  ¤ 4,520.00 inkl. ESA 675 W 3D 21'' touch screen control (Windows Base)                  ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)                ¤ 10,165.00 DELEM 69 T 3D 17'' touch screen control (Windows Base)                ¤ 16.350,00 KK Industries GmbH There's something for everyone!

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 31662, functionality: fully functional, operating hours: 15,513 h, controller manufacturer: Cadman, bending force (max.): 137 t, working length: 3,100 mm, TECHNICAL DETAILS Pressing force: 1,350 kN Working length: 3,100 mm MACHINE DETAILS CNC control: Cadman Axes: Y1, Y2, X, X1, R, Z1, Z2 Operating hours Total on-load hours: 15,513 h Motor running hours: 28,347 h EQUIPMENT CNC crowning Angle measuring system (not connected) Dcodpfoylwg Djx Aa Nog Wila hydraulic upper and lower clamping

Condition: reconditioned (used), functionality: fully functional, turning diameter over cross slide: 1,000 mm, turning diameter: 1,350 mm, turning length: 3,000 mm, Status: during general overhaul. The PORĘBA TR series lathe is a universal machine tool intended for both roughing and finishing operations. It is particularly suitable for machining shafts as well as heavy, large-size workpieces. The offered machine is currently undergoing a general overhaul – the last photo presents its current stage of refurbishment. The remaining photographs show TR series lathes after general overhauls performed by our company and delivered to end users. They serve as a reference for the final quality standard and workmanship. Scope of the general overhaul: - Complete dismantling of the lathe - Regeneration and replacement of worn components - Calibration of trapezoidal lead screws and manufacturing of new bronze nuts - Replacement of bearings and sliding bushings, including new spindle bearings - Grinding of bed, carriage and top slide guideways, followed by scraping of mating surfaces (with application of anti-friction materials) - Regeneration of the tailstock quill - Regeneration of the tool post - Overhaul and modernization of lubrication and coolant systems - Electrical scope: manufacturing of a new electrical cabinet, complete new machine wiring, and replacement of all electrical components with new ones - Inspection of electric motors together with replacement of bearings - New painting Dcsdpeyh H Iyofx Aa Nog - After completion of the overhaul: trial assembly, preliminary acceptance at our workshop, positioning on the foundation, levelling and final acceptance - Adaptation of the lathe to minimum safety requirements in accordance with applicable EU Directives

Condition: used, Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input, reserve module -Manufacturer: Siemens, Simatic S7 electronic module ET 200S -Type: 6ES7 135-4GBO1-OABO -Number: 1x module available Dsdpfx Aaeh D Almo Nscg -Price per piece -Dimensions: 55/15/H80 mm -Weight: 0.1 kg/pc

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders -Hydraulic cylinder: tilt cylinder -Stroke: 135 mm -Piston rod: Ø 126 mm / mount Ø70 mm -Cylinder: outer Ø 155 mm -Hole: Ø 50 mm / Dimensions see photo technical drawing -Dimensions: 365/260/H175 mm -Weight: 39 kg Dcodpfsg Akafox Aa Neg