Used Ventrac 3200 for sale (1,244)

Condition: new, sheet length: 3.200sheet thickness: 13,0total power requirements: 18,5weight approx.: 11700messurements (LxWxH): 4000 x 1700 x 1800 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut) Nksded Ab Hmjpfx Ah Rsw

Condition: good (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: TB321300601, Pick-up 1.80 m Electrical controls Njdpfx Aeyfum Ish Rokw

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) N. 4 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), dimensions mm 7232 (ca.) Nksdpfx Ajd Rg Dpsh Rew Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 23.3

Condition: good (used), Year of construction: 2007, Brand: Mori Seiki Type: NT3200 Year of build: 2007 Serial number: NT320GA0030 Additional information: Run time: 7976H Maximum turning diameter (milling head): 600mm Maximum turning diameter (turret): 210mm Maximum turning length: 1045mm Spindel bore: 67mm Number of tool spaces: 40 Spindel: Kitagawa SS1666 Spindel speed: 5000 RPM Control system: Fanuc Series 31i Equipped with: tool presetter,Absolent AB oil mist filter, Enomoto chip conveyor, Ercoatius coolant filter, documentation Milling head Maximum speed: 12000 RPM Tool shaft size: C5 X-axis travel: 685mm Y-axis travel: ±125mm Z-axis travel: 1075mm B-axis travel: ±120° X/Z-axis rapid traverse: 50 m/min Y-axis rapid traverse: 30 m/min Turret Number of tool places: 12 Driven tool speed: 6000 RPM X-axis travel: 130mm Z-axis travel: 970mm X/Z-axis rapid traverse: 30 m/min Machine dimensions LxWxH: 5200x3100x3000mm Own weight: 14400 kg Including bar feder Brand: Iemca Type: VIP 80E II Year 2007 S/N: 020710QA07 Own weight: 605 KG Bar capacity: 6-80mm Nsdpfxoxn Ddts Ah Rjkw

Condition: new, Year of construction: 2025, bending angle (max.): 150 °, sheet thickness steel (max.): 1 mm, sheet thickness copper (max.): 1 mm, ❗❗ Electric sheet metal bending machine RED-3200/1.0/150* with recess ❗❗ Discover a new era in metalworking with our revolutionary sheet metal bending machine that harmoniously combines craftsmanship heritage with the latest technological developments. We present a machine that not only meets but exceeds your wildest expectations. Don't miss the chance to equip your workshop with a groundbreaking tool that eliminates the traditional difficulties of manual bending and offers unprecedented comfort and efficiency. Bending machine / bending machine / roofing machine Polish manufacturer PROD-MASZ / brand new directly from the manufacturer With our bending machine, equipped with an advanced electronic control system, precision and ease of use become standard. Now one push of a button starts the bending process and guarantees flawless results without unnecessary effort. Magnets attached to the bending beam ensure a stable position of the sheet metal and enable precise dimensional adjustment, which is the key to perfect shapes. The RED 3200/1.0 mm/150* offers an impressive maximum working width of 3,200 mm and the ability to bend steel sheets up to 1.0 mm thick, with non-ferrous metals achieving an additional 30% capacity. The maximum bending angle of 150 degrees and the ability to cut sheets across the entire working width push the boundaries of precision and efficiency. In addition, the machine offers a three-stage height adjustment of the upper beam and a number of necessary accessories, including a protractor, an angle limiter, a rear table for supporting the sheet -> quick adjustment with a handwheel. We look forward to hearing from you! Nkjdpjcv R Dksfx Ah Rew -> We issue invoices

Condition: ready for operation (used), Siemens 1FU1050-6NC tacho generator 20.0 mVmin, max speed: 3200/min, SN: C-M27421, used, normal signs of use, 100% functional, scope of delivery as per photos. Nodpfex Dvbpjx Ah Rekw

Condition: ready for operation (used), Fanuc A16B-3200-0042 / 02A - A16B-3200-0042/02A CPU Board, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Nedoi D U D Ropfx Ah Rskw

Condition: good (used), Year of construction: 1995, fuel type: electric, Manufacturer: Hyster Tip: E 3,20 XM lifting capacity: 3200 kg lifting height: 3700 mm Fork length: 1200 mm Nkjdpfxolz Nbps Ah Rsw

Condition: used, Year of construction: 2008, operating hours: 54,000 h, functionality: unexamined, Lindner Jupiter 3200 slow-speed single-shaft pre-shredder including hydraulic unit and control cabinet Operating hours: 54,000 bh Machine has been regularly maintained and overhauled Njdpfx Ahex R S Sge Rokw Application: Shredding of commercial and industrial waste,

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: TM-2006-31, Old lady but still running good. A lot of new sanding bellts Nedpsx Swmrjfx Ah Rokw

Condition: new, machine/vehicle number: 4,047,234,000, Several 1.5m Fronius Robacta hose assemblies are available. Nkjdpfjwbkk Aex Ah Rsw 4,047,234,000 Wearable parts also available. Approximately 30 hose assemblies in stock. New price approximately €1,300 each. One piece €349. If you need more, I can offer a good price.

Condition: as good as new (ex-display), FRONIUS VR 1550 CMT WIRE FEED Nkjdpjwblfzsfx Ah Row

Condition: new, Fronius RCU 5000i compatible with Fronius TPS 2700 / 3200 / 4000 / 5000 / CMT Remote Control Unit (RCU) for Fronius welding machines: - Adjust welding parameters such as current, voltage, and wire feed speed conveniently from the work area without having to go directly to the welding machine - Intuitive display, easy to use - Upload characteristic curves Nkodpewbiacjfx Ah Rjw AVAILABLE FOR IMMEDIATE DELIVERY PROPER INVOICE Viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping is no problem! ✔

Condition: new, Year of construction: 2025, All roof bending machines from PROD-MASZ are valued not only by customers from Germany, but also from all over the world. Thanks to the fact that we have been manufacturing and supplying machines that meet individual requirements for years, we have established ourselves as the market leader for bending machines in Europe and worldwide. Every roofing machine we supply has a strong and durable construction, it is manufactured to the best standards. Bending beam only 15mm RED 3200 / 0.8mm Technical specifications: the maximum working length: 3200 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminum, copper, zinc) Bending beam thickness: 15 mm Bending angle: max. 150 degrees Upper cheek opening: 80 mm Weight: approx. 600 kg Roller shears + 350 Euro The front depth stops and rear frame are also included in the price. Bending from 3 sides -ᐳ cutouts laterally 60mm / 45 ° recess Njdpfx Aob Eg Nksh Rekw Price: 5100.00 EUR Delivery date: every week We are looking forward to your contact! Invoices are issued either with 0% as intra-Community delivery.

Year of construction: 1994, condition: excellent (used), Extraction system Scheppach HA 3200 Nodpfx Aoghrvxjh Rskw

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, control type: CNC control, Equipment: documentation/manual, Technical data: Useful length: 3240 mm Performance at 400N/mm2: 6.00 mm Stroke of upper beam: 1030 mm Njdpfx Ahexn Dhlo Rjkw Bending beam adjustment: 180 mm Drive power upper beam: 2x 9.45 kW Drive power bending beam: 2x 9.42 kW Upper beam Upper beam pre-stop from 15 mm Geometry: 180° Hydraulic tool clamping (WZS 5000) Bending beam Up’n Down bending beam, program-controlled Pneumatic clamping WZS 7000 Motorized bending beam adjustment 180 mm Motorized bending center adjustment 100 mm Motorized central crowning

Condition: used, Sawblade tiltable 0-45 ° Length of the rolling table 3.200, 3.800 mm cutting width 1.300, 1,500 mm Nodpfx Ahjtg Ails Rjkw Motor output 7,5 kW Cutting height 177 mm Cutting height at 45° 133 mm Saw blade diameter 500 mm Speed 3000/3600/4200 U/min. work height max. 870 mm Dust suction hood 1x120, 1x100 mm

Condition: excellent (used), Year of construction: 2009, Technical Data: Working length: 3230 mm Distance between uprights: 2690 mm Pressing force: 230 tons CNC control: TASC 6000 Number of controlled axes: Stroke: 445 mm Throat depth: 420 mm Table width: 140 mm Working height: 1065 mm Crowning: CNC-controlled Hydraulic tool clamping Die shifting CE marking Motor power: 30 kW Dimensions (L x W x H): approx. 4150 x 2350 x 3100 mm Weight: approx. 17 tons Accessories: 2 pcs. bending aids Electronic pressure gauge Measuring system with centrally mounted glass scales and temperature compensation Nkodpfjxdt U Hjx Ah Rjw Safety device BendGuard Network capability Support arm with height adjustment Condition: Overall in very good condition Little used, 35,000 hours The seller is not liable for typographical or data transmission errors. The machine is visually, technically, and regarding wear in accordance with its age; used machines are sold without any warranty.

Condition: good (used), Code: 0193 Brand: CASATI MACCHINE Model: BIG 3200 - CE Standard Hydraulic two knives veneer pack guillotine shear - CE Standard Nodjqzky Ejpfx Ah Rjkw Description: Sturdy steel made structure, cast iron knife beam. Self-lubrificating prismatic slide-ways The machine allows, with a single operation, to cut the veneer pack on both sides to be trimmed - The simultaneous trimming on two sides of the veneer pack is carried out thanks to the movement at the same time, of two knives, one fitted on a fixed structure and the other one on a moving part - The machine is equipped with an adjustable rear shoulder, as well as with a pressor to clamp the veneer pack during cutting operations. Possibility of working as a single guillotine shear Useful cutting length (as double guillotine shear) mm 3200 Useful cutting length (as single guillotine shear) mm 3550 Pressore stroke mm 100 Pressor width mm 550 Min width to be cut mm 18 Max width to be cut mm 530 Scrap adjustment field mm 0/50 Photoelectric cells Electronic programmer allowing to program the number of cuts to be effectuated and the relevant width Perimeter protections Total power installed Kw 13, 9 Operating pressure bar 6/7 Overall dimensions mm 5200 x 1700 x 1800 h Weight kg 9000

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 720 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC, workpiece weight (max.): 3,000 kg, TECHNICAL DETAILS X travel: 3,200 mm Y travel: 720 mm Z travel: 600 mm Table height: 900 mm Number of T-slots: 5 T-slot width: 18 mm T-slot spacing: 125 mm Distance spindle nose to table: 140 - 740 mm Max. workpiece weight: 3,000 kg Clamping surface: 3,900 x 650 mm Tool holder: DIN 69871 AD 40 Spindle speed: 30 - 8,000 rpm Max. torque: 102 x 240 Nm Number of tools: 30 pcs Max. tool length: 330 mm Tool clamping: disc spring Max. milling capacity: 400 x 600 Max. thread size: M20 x M30 mm Boring diameter: 28 x 44 mm Feed rates X/Y/Z axis: 30,000 mm/min Rapid traverse X/Y/Z: 30 / 30 / 30 mm/min Max. feed force: 9,000 / 9,000 / 9,000 kN MACHINE DETAILS Control: Heidenhain TNC Nsdpfx Asxn Nd Seh Rjkw Space requirement (L x W x H): 7,200 x 3,400 x 3,100 mm Coolant: 250 bar Total power requirement: 50 kW EQUIPMENT Special accessory Trautomatic (L = 7.50 m) Special accessory full enclosure for work area (H = 3.60 m)

Condition: excellent (used), Year of construction: 2005, Arburg 720 S 3200-2100 Injection Moulding Machine Nodpfoxyq H Ejx Ah Rokw Year of manufacture: 2005 Machine in very good technical condition, fully operational, ready for immediate use in an industrial facility. Clamping force factory increased by Arburg to 3600 kN. Clamping unit Clamping force: 3600 kN Platen dimensions (H × W): 1040 × 1040 mm Tie bar spacing (H × W): 720 × 720 mm Minimum / maximum mould height: 300 mm Maximum opening stroke: 1400 mm Injection unit Screw diameter: 70 mm Injection volume: 1078 cm³ Shot weight: 984 g Injection pressure: 2000 bar Electrical-hydraulic equipment Pump motor rated power: 55 kW Heater power: 30.3 kW Dimensions & weight Net weight with control cabinet: 17 t

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, overall weight: 10,200 kg, positioning accuracy: 0.1 mm, type of input current: three-phase, total height: 2,300 mm, total length: 6,000 mm, total width: 2,000 mm, cutting width (max.): 450 mm, machine base height: 850 mm, working height: 850 mm, Double blade guillotine, electric movement of the movable blade via ball screw, lower rear movable blade, electric rear stop, 2 lasers, 10° cutting angle for improved cutting quality and better veneer penetration, weight: 10,200 kg, new PLC. Nkedpfxowy Irbs Ah Row

Condition: used, Year of construction: 1997, bar material dia. 8 - 52 mm bar length 3200 mm number of bars 6 / ø 52 mm oil volume 150 l weight 700 kg total power requirement 0,75 kW Nkodpfx Ahevh Nc Es Rsw

Condition: used, Year of construction: 2001, bar material dia. 8 - 52 mm bar length 3200 mm number of bars 6 / ø 52 mm oil volume 150 l Nsdpfx Aevh Ncljh Rskw weight 700 kg total power requirement 0,75 kW

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, 1 used steam boiler ----- Nksdpfsxnxdhjx Ah Rsw - mounted on frame - - with integrated economizer - Manufacturer: LOOS, Gunzenhausen Type: UL-S 3200 Output: 3,200 kg/h Permissible operating pressure: 13 bar Increased test pressure: 24.7 bar Total water content, approx.: 4,830 l Year of manufacture: 10 / 2006 CE marking: CE 0036 Equipped with Weishaupt gas-/oil burner GL9/1-D/TMD, separate control cabinet, feed water pump, and existing coarse and fine fittings. Integrated economizer type Eco1: Permissible max. pressure: 31 bar Test pressure: 56 bar Permissible max. temperature: 238°C Thermal output: 124 kW Total volume: 81 ltr