Used Vertical Turret Lathe for sale (12,359)

Condition: good (used), Ward turret lathe Chuck diameter: 200 mm Dodpoq H Aqqofx Am Touw Turning diameter bed: 290 mm Support turning diameter: 170 mm Stroke: 185 mm Clearance: 32 mm Dimensions: 205x105x135 cm LxWxH

Condition: used, Year of construction: 2014, 2 Vertical Turning Machines (Tandem) Manufacturer: EMAG Model: VL 3 Year: 2014 Control: Fanuc 31/32i TECHNICAL SPECIFICATIONS FOR THE VL3 MACHINE (Subject to errors and omissions) WORKING AREA Chuck diameter: 170 mm Swing diameter: 210 mm X-travel: 400 mm Z-travel: 200 mm Loading time (depending on clamping device): 2–4 sec MAIN SPINDLE Spindle flange to DIN 55026, size 5 Spindle bearing diameter (front): 80 mm Maximum spindle speed: 7,500 rpm MAIN DRIVE AC asynchronous motor Power at 40/100% duty cycle: 25/16 kW Full power from spindle speed (100% ED): 1,800 rpm Torque at 40/100% duty cycle: 134/85 Nm Dedpfsytn Emsx Am Tsuw FEED DRIVE Rapid traverse speed, X axis: 60 m/min Rapid traverse speed, Z axis: 30 m/min Feed force (X and Z): 5 kN Ball screw diameter (X/Z): 40 mm TURRET Cylinder shank mount DIN 69880, 12 positions Shank diameter: 40 mm ELECTRICAL EQUIPMENT according to VDE 0113 Operating voltage: 400 V Control voltage – DC: 24 V; AC: 230 V Frequency: 50 Hz Connected load without/with live tool: 28 / 31 kW Supply line protection: 50 A DIMENSIONS & WEIGHT Length: 2,500 mm Length incl. chip conveyor: 3,600 mm Width: 1,900 mm Height: 2,300 mm Weight: approx. 5,500 kg Linear roller guides in the X-axis located outside the machining area. GANTRY SLIDE INCLUDING SLIDE GUIDE Motor spindle mounting AC synchronous drives for X and Z axes Encapsulated linear measuring systems Resolution all longitudinal axes: 0.001 mm (absolute measurement) Rapid traverse: X axis 60 m/min, Z axis 30 m/min 1 MOTOR SPINDLE size 5 DIN 55026 Max. speed: 7,500 rpm Power at 40/100% duty cycle: 25/16 kW Torque at 40/100% duty cycle: 134/85 Nm HYDRAULIC UNIT with gear pump. CENTRALIZED OIL SUPPLY for lubrication of ball screws and roller guides COOLING UNIT Controls the machine’s thermal balance. Keeps motor spindle, turret, and control cabinet at ambient temperature. TOOL CARRIER SYSTEM 1 12-STATION TURRET with mounting holes Ø40 DIN 69880 Shortest indexing time via electric motor drive Cooled for consistent accuracy Internal coolant supply to tool in cut position WORKPIECE STORAGE & TRANSPORT SYSTEM 1 CIRCULATING WORKPIECE FEEDER Storage capacity: 27 workpieces (Ø 30–85 mm), or 18 workpieces (Ø 30–130 mm), Max. workpiece height: 100 mm Loading height: 1020 mm Chain-type accumulating conveyor with transport prisms Workpieces are NC-positioned for clamping device take-over. The pick-up spindle retrieves blanks from the conversion-free storage and conveyor system. COOLANT AND CHIP REMOVAL SYSTEM 1 COOLANT SUPPLY with integrated coolant tank, capacity approx. 300 l, coolant filter Coolant pump delivery rate: approx. 80 l/min at 7 bar 1 CHIP CONVEYOR Discharge height: 1,250 mm, hinge belt design 1 EMULSION MIST EXTRACTION from the machining area ADDITIONAL EQUIPMENT AND EXPANSIONS WORKPIECE STORAGE & TRANSPORT SYSTEM 1 INTERFACE FOR EMAG TRANSFER AND FLIP UNIT OP20 COOLANT AND CHIP REMOVAL SYSTEM 1 FLUSHING NOZZLES: 2x in working area, 1x in machine base HYDRAULICS & PNEUMATICS 1 MAINTENANCE UNIT FOR COMPRESSED AIR with mounting 1 PICK-UP DEVICE BLOW-OFF (2 nozzles, WITHOUT maintenance unit – see maintenance unit compressed air)

Condition: good (used), Year of construction: 1979, Single column vertical turning lathe BERTHIEZ TM500 SP Dusdpfx Asx A U Raem Tsw Manufacturer: Berthiez (France) Model: TM500 SP Year of manufacture: 1979 Main technical data: Table diameter: 6300 mm Maximum turning diameter: 15000 mm Maximum usable height: 4000 mm Arm travel: 3600 mm Main motor power: 100KW Maximum allowable load on faceplate: 80 t Ram size: 360x360 mm Machine weight: approx. 230 tons The machine is capable of both turning and milling operations. Do not hesitate to contact us for any additional information.

Condition: new, Year of construction: 2025, functionality: fully functional, turning height: 1,400 mm, workpiece weight (max.): 8,000 kg, turning diameter: 1,600 mm, faceplate diameter: 1,250 mm, total height: 5,190 mm, total width: 4,875 mm, total length: 3,885 mm, rotational speed (max.): 360 rpm, torque: 17,880 Nm, table load: 8,000 kg, overall weight: 30,000 kg, Equipment: rotational speed infinitely variable, Vertical turret lathe in flat-guided design with extensive full equipment: WITH MILLING FUNCTION - Milling spindle 2000rpm SK50 22 KW - C - axis 0.001 degrees - Complete housing - Chip conveyor Dusdpfx Amevtzc Ij Tsw - Internal coolant supply - Fanuc control - 24 tools - 12 milling tools - Manual Guide I - Tool holder package - Electronic handwheel - Signal light - Manual 3-jaw faceplate 1250mm - Renishaw tool measurement - Renishaw workpiece measurement - Glass scales in X and Z axes - 24 month guarantee

Condition: new, Year of construction: 2025, functionality: fully functional, turning height: 1,600 mm, turning diameter: 2,000 mm, CNC Vertical Turning Center Model: VTC-16/20R with Fanuc 31i-B Table Diameter: Ø1,600 mm Max. Swing Diameter: Ø2,000 mm Max. Turning Height: 1,600 mm Table Speed: Max. 250 rpm Table Load Capacity: 8,000 kg Table Indexing Speed: 720°/min Table Indexing Accuracy: 0.001° X-Axis (Ram horizontal): -100 mm to 1,170 mm Z-Axis (Ram vertical): 900 mm Drive Spindle Speed: Max. 2,000 rpm Ram Size: 240 mm x 240 mm Milling Spindle Taper: ISO 50 Tool Shank Size: 40 mm x 40 mm Crossrail (vertical travel): 250 mm x 3 stages (hydraulic) Table Drive Motor: AC 37/45 kW (continuous/30 min. duty) Milling Spindle Drive Power ISO 50: 15/18.5 kW (continuous/30 min. duty) Control System: Fanuc 31i-B Display Unit: 15-inch TFT-LCD Memory Capacity: 1 MB Automatic Tool Changer: 24 positions (for 7 turning tools + 1 cover + 16 milling tools) Standard Tool Holders: New 240 TCR-01 (2 pcs) Splash Guard: Table version (R-Type standard design) External Coolant System: 3 bar (80 l/min) Chip Conveyor: Hinged belt type Table Bearing Cooling Device Dujdpoxp Nb Tsfx Am Tew 4-Jaw Independent Manual Chuck Foundation Anchor Bolts / Base Plates Maintenance Tools and Toolbox Hydraulic Power Unit Work Area Lighting Signal Lamp: 3 colors (green, red, yellow) Operating Manuals (English): 1 CD with Fanuc manuals and 3 books with mechanical/electrical manuals Power Supply: 220 V, 60 Hz, 3-phase Machine Color: Manufacturer standard OPTIONAL ACCESSORIES (#1) Turning Tool Holder: Type 240TCR, 4x included Rigid Tapping: 1x included OPTIONAL ACCESSORIES (#2) Automatic power-off for N.C. - on request Turning tool holder type 240TCR - on request Through-spindle coolant supply: 30 bar (pump pressure) - on request Transformer 415 V, 50 Hz, 3-phase - on request Linear scales X-, Z-axis (Fagor, Spain) - on request Workpiece measuring device - on request Tool measurement TS27R, Renishaw - on request Other information: INSTALLATION, COMMISSIONING, TEST OPERATION, AND TRAINING - not included in the price INSURANCE AND FREIGHT - not included in the price Image shows machine with pallet changer. The offered machine DOES NOT INCLUDE A PALLET CHANGER! Errors in technical data excepted. The scope of accessories is as described in the text of this article only. There is no entitlement to any other accessories, such as those shown for illustration purposes. The general terms and conditions of JS-Werkzeugmaschinen GmbH apply.

Condition: new, Year of construction: 2025, turning height: 2,000 mm, workpiece weight (max.): 12,000 kg, faceplate diameter: 2,000 mm, CNC Vertical Turning Center Model: VTC-20/30 with Fanuc 31i-B Table diameter: Ø2,000 mm Maximum swing diameter: Ø3,000 mm Maximum turning height: 2,000 mm Table speed: max. 200 rpm Table load capacity: 12,000 kg Table indexing: 0.001° Z-Axis (vertical ram travel): 1,200 mm Main spindle speed: max. 15 ~ 2,000 rpm Ram size: 240 mm x 240 mm Milling spindle taper: ISO 50 Tool shank size: 40 mm x 40 mm Crossrail (vertical travel): 1,000 mm 250 x 4 stages (hydraulic) Rapid traverse X-axis: 10,000 mm/min Rapid traverse 7-axis: 10,000 mm/min Cutting feed rate: 1 ~ 3,000 mm/min Table drive motor: AC 45/55 kW (continuous / 30 min.) Milling spindle drive power ISO 50: 18.5/22 kW (continuous / 30 min.) Control: Fanuc 31i-B Display unit: 15-inch TFT-LCD Tape memory: 1 MB Automatic tool changer: 12 positions (for 5 turning tools + 1 cover + 6 milling tools) Standard tool holders: New 240 TCR-01 (2 pieces) Splash guard: Table version (R-type standard) External coolant system: 3 bar (80 liters/min.) Chip conveyor: hinge-type 4-jaw independent manual chuck Foundation anchor bolts / shims Maintenance tools and toolbox Dodpfx Amoxqb D No Tsuw Hydraulic power unit Work area lighting Signal lamp: 3 colors (green, red, yellow) Operating manuals (English): NC 1 CD with Fanuc manuals and 2 books with mechanical/electrical instructions Power supply: 220 V, 60 Hz, 3 phase Machine color: manufacturer standard OPTIONAL ACCESSORIES (#1) Automatic tool changer ATC 24 positions - on request Automatic shutdown for N.C - on request Turning tool holder type 240TCR - on request Through-spindle coolant supply: 30 bar (pump pressure) - on request Transformer 415 V, 50 Hz, 3 phase - on request Linear scales X, Z-axis - on request Rigid tapping - on request Automatic tool changer ATC 24 positions - on request Other notes: INSTALLATION, COMMISSIONING, TRIAL OPERATION AND TRAINING - not included in the price INSURANCE AND FREIGHT - not included in the price Errors in the technical data excepted. The scope of accessories applies only as explicitly described in the article’s text. Any additionally pictured accessories, for example for illustration purposes, are not included in the offer. The general terms and conditions of JS-Werkzeugmaschinen GmbH apply.

Condition: used, Year of construction: 1991, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 1991 Control : Siemens 840 Dsl Turning diam. : 1600 mm Turning length : 1800 mm In General: Year of manufacture:1991 / 2010 Control system retrofit:2010 Control system:Siemens 840 Dsl Circumferential diameter:2,000 mm Turning diameter:1,600 mm Turning height:1,800 mm Table / Faceplate: Technology:Gear-driven table Speed:315 rpm Power:105 kW Max. torque:50,000 Nm Faceplate:1,600 mm Max. table load:12,000 kg Tool carrier: Crossbeam travel (vertical):1,200 mm Chisel slide travel:1,500 mm Support travel (horizontal):2,300 (+/-1,150) mm Penetration diameter:340 mm Chisel slide cross-section:240 x 240 mm Equipment: Tool magazine:20 stations Chip removal:Chip conveyor Coolant supply:Coolant system with filter Tool measurement:Probe Set-up:Electronic handwheel Tool holders:Various tool holders Control system overhaul: Year of overhauling:2010 Technology:Siemens 840 Dsl NC control:Sinumerik NCU 710.2 Djdpfx Aey R Iwxjm Tsuw Motors:X/Z-axis, ATC, :spindle Measuring systems:Direct scales X/Z, ROD encoder table Control panels:Machine control panel, ATC operator panel

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, input voltage: 400 V, year of last overhaul: 2023, Description – General: Year of manufacture: 2001/2023 Manufacturer: Emag Dsdpfx Astpu Szom Touw Machine type: VL3 Technical data: Control system: Fanuc 21i-T Swinging diameter: approx. 210 mm Maximum speed: 6,500 rpm Turret: VDI 40 mm, 12 stations The machine does not have a live tool. Hinged belt chip conveyor Spindle mount: GR. 5 Rotating parts conveyor. Machine weight: approx. 5.5 t The following work was carried out during this overhaul in 2023: - The machine was completely disassembled, cleaned, and repainted. - The main spindle was fitted with new bearings. - The guides and guide shoes in the X-axis and Z-axis were replaced. - The ball screw in the X-axis and Z-axis was replaced. - New unit for central lubrication and new hoses. - The hydraulic unit was inspected and serviced. The drive coupling between the motor and pump was replaced. - The cooling unit was inspected and serviced; the temperature difference controller was replaced. - The clamping cylinder was fitted with new bearings and seals. - The gearbox of the A-axis was fitted with new bearings, and the coupling between the motor and gearbox was replaced. - The electrical cabinet was cleaned. - The control panel was replaced. - New screen. - New internal lighting. - The turret was disassembled, wear parts were inspected, cleaned, and re-sealed. - The turret encoder and encoder wheel were cleaned. - The length measuring systems in the X-axis and Z-axis were disassembled and cleaned. - The springs of the pickup station were replaced. - The motors of the X-axis and Z-axis were checked for bearing damage. - The panes on the work door were replaced. - The chip conveyor was completely disassembled, fitted with new bearings, cleaned, and painted. - Various small parts on the machine were also replaced, of course. The product has been described by us with the utmost care. The description is non-binding and should be verified during an inspection.

Year of construction: 2007, condition: good (used), Make: Okuma Type: LVT-300 M Control: OSP-P200L Year: 2007 X Travel 210 Z Travel 360 Power 22 kW Driven live tools 7.5 kw / 3000 Rpm In feed table Out feed table Package jaws Package tool holders Chip conveyor Coolant system 9 Bar Grundfos Specifications Metric US Standard Max. turning Ø 280 mm Table Ø 210 mm Horizontal movement support 360 mm ATC / revolver 12 Speeds / ranges 4000 Rpm C-Axis 360000 ° Dimensions (Estimate) There are no dimensions for this machine (yet). Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Dsdpfx Amoku Aaas Tsuw

Condition: excellent (used), Year of construction: 2009, turning height: 1,280 mm, total height: 5,600 mm, total width: 3,850 mm, total length: 4,260 mm, rotary table diameter: 1,400 mm, workpiece diameter (max.): 1,600 mm, overall weight: 21,500 kg, CNC Vertical lathe Fremtas - 16FR3 MACH-ID 9467 Make: Fremtas Type: 16FR3 Dujdpfoy Htilsx Am Tow Control: FAGOR 8055 TC Year: 2009 Work load 6300 Kg Cross rail adjustment 660 mm Feed rate cross rail 0 - 400 mm/Min Feed rate 0 - 3000 mm/Min Rapid feed 0 - 8000 mm/Min Central lubrication Chip conveyor RAM with Sandvik COROMONT C8 Tooling C8 with double connector Ca 10 units CAPTO Tool system 4 extra heavy duty jaws Max. turning Ø: 1600mm Table Ø: 1400mm Horizontal movement support:1000mm Speeds / ranges: 1 - 200Rpm Power: 75kW Maximum turning height: 1280mm Vertical movement support: 700mm Length: 4260mm Width: 3850mm Height: 5600mm Weight: 21500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), turning height: 1,500 mm, workpiece weight (max.): 20,000 kg, turning diameter: 2,400 mm, Manufacturer: VIPER Type: VTL 20/24 M Control: Fanuc Oi-TD Dsdpfsv R Di Sjx Am Tsuw Year of construction: 2008 X Stroke 1835mm Z Stroke 1000mm Table load 20 Ton Ram size 230 x 230 mm Stroke cross rail 800 mm Stroke crossrail in 5 steps each 200 mm Live tools 2000 rpm Power live tools 15 kW ATC 18 station max L = 450 mm Taper BT50 BIG PLUS Full C-Axis 360,000 Under power in AEROSPACE precision plant 2020 Table bearing replaced 2020 Ram bearing replaced 2025 new chip conveyor Specifications Metric US standard Max. turning diameter 2400mm Table diameter Ø 2000 mm Tool changer 18 Speed 200 rpm Power 48 kW Max. turning height 1500 mm C-axis 360,000 ° Dimensions (estimate) Length 9,300 mm Width 6,300 mm Height 6,700 mm Weight 48,000 kg Please note: The information on this page has been obtained to the best of our knowledge and belief, and where possible, from the manufacturer. The information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 6,000 rpm, overall weight: 6,500 kg, Fanuc 18ITB Dodsx Irzvopfx Am Tsuw parts diameter 130 mm, length 110 mm spindle speed 7500 rpm 12-station turret max tool speed 6000 rpm power 24 kW, chip conveyor

Condition: good (used), Year of construction: 2008, For sale: 1 unit Scherer VDZ 80 DS with the following technical specifications: Swing diameter: 120 mm Z-axis (vertical): 265 mm Duedpfx Amey H Iglo Tow X-axis (horizontal): 280 mm Front bearing diameter: 85 mm Rear bearing diameter: 75 mm 2 x A4 spindle Spindle drive unit rated power: 16.8 kW Rated torque: 100 Nm Speed: 1,000 – 7,000 rpm Travel speed Z-axis: max. 30 m/min Travel speed X-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9,000 kg Complete documentation available. Note: The system will likely require some reprogramming, as it was previously integrated into a complete processing line. However, a stand-alone program is available. Transportation and loading can be organized Europe-wide at extra cost upon request. Prices are subject to VAT. Inspection possible by appointment. Please contact us; our team will be happy to assist you. Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you wish to sell your machine? For further information or contact options, please reach us via the contact form.

Condition: good (used), Year of construction: 2004, For sale are 2 units of Scherer VDZ 80 DS with the following technical specifications: Swing diameter: 120 mm Z axis (vertical): 265 mm X axis (horizontal): 280 mm Front bearing diameter: 85 mm Rear bearing diameter: 75 mm 2 x A4 spindle Spindle drive rated power: 16.8 kW Rated torque: 100 Nm Speed range: 1000 - 7000 rpm Traverse speed Z axis: max. 30 m/min Traverse speed X axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9000 kg Complete documentation available. Attention! The system will likely need some reprogramming as it was part of a complete production line. However, an individual program is available. On request, transport and loading can be organized throughout Europe for an additional charge. Prices are subject to VAT. Inspection possible by appointment. Please contact us; our team looks forward to assisting you. Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you want to sell yours? Dujdpfx Amjy H Ifuo Tsw For more information or contact options, please reach us via the contact form.

Condition: excellent (used), Year of construction: 1994, Rexroth System 200 BTV30 control system Swing over bed: 160 mm Swing over cross slide: 250 mm Chuck diameter: 160 mm Turning length: 300 mm Spindle speed: 8000 rpm 12-station turret with driven tools Dujdpewhrg Ejfx Am Tew Workpiece conveyor belt Chip conveyor Various tool holders

Condition: ready for operation (used), Machine in good operating condition Dodpfx Aoy Rnfvem Teuw

Condition: ready for operation (used), Machine in good operating condition Dodsy Rnd Eepfx Am Touw

Condition: ready for operation (used), Machine in good operating condition. Duodjy Rnczopfx Am Tsw

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, total width: 45,000 mm, total length: 19,900 mm, total height: 23,000 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, bar length: 600 mm, CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Dodey Nyrxspfx Am Touw Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, total width: 45,000 mm, total length: 19,900 mm, total height: 23,000 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, bar length: 600 mm, CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Dodpfey Nyg Ajx Am Tjuw Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: like new (used), Year of construction: 2017, operating hours: 5,100 h, functionality: fully functional, machine/vehicle number: 110366, Number of axes: 5 + V Maximum turning diameter: Ø160 mm Maximum turning height: 150 mm Maximum diameter of workpiece: Ø100 mm Maximum height of workpiece: 150 mm Maximum spindle speed: 6000 rpm Travel – x 700 mm Dedsy Ukgkopfx Am Touw Weight: 6000 kg.

Condition: good (used), Year of construction: 2005, spindle speed (min.): 3,000 rpm, travel distance Z-axis: 450 mm, Model Year: 2005 Chuck Diameter: 12" Number of Axes: 2 Length: 450 mm Spindle Bore Diameter: 350 mm Dujdpox Nvtfefx Am Tsw Spindle Speed (RPM): 3000 Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: used, Year of construction: 2008, feed length Z-axis: 600 mm, spindle speed (max.): 8,000 rpm, Model Year: 2008 Width: 1,150 mm Length: 600 mm Djdpfex S I Tiox Am Tjuw Height: 600 mm Number of Axes: 4 Tool Holder: BT40 Spindle Speed (rpm): 8,000 Processable Material Types: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: good (used), Year of construction: 2007, functionality: fully functional, Model Year: 2007 Width: 1100 mm Length: 410 mm Height: 640 mm Number of Axes: 3 Dodpsx Tt I Usfx Am Tsuw Tool Holder: BT50 Spindle Speed (rpm): 6,100 Processable Material Types: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: used, Year of construction: 2012, Model Year: 2012 Width: 1,050 mm Length: 515 mm Height: 600 mm Dujdsx Tuddopfx Am Tjw Number of Axes: 3 Holder: BT40 Spindle Speed (RPM): 8,000 Processable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek