Used Vessel Reverser for sale (6,622)

Year of construction: 2008, condition: used, 5-vessel-brewhouse with additional whirlpool with a knockout capacity of 250 hl at 12° Plato. The brewhouse consists of a mash kettle, a mash decoction kettle, a lauter tun, a prerun vessel and a wort kettle with internal boiler. Furthermore, a classic whirlpool with wort cooling and wort aeration is installed. The brehouse is fully automated with the electronic process control "brewmaxx V7" and on basis of the operation system Windows. The brewhouse is completely made in stainless steel, but installed beneath the old copper hoods. The prerun vessel is "Outdoor"-installation, the whirlpool is - like the other brewing vessels - installed in the brewhosue room beneath a copper hood. Additional title: Modern brewhouse made of stainless steel, copper-clad Cast wort capacity: 250 hl Operation / Control: Fully automatic with "brewmaxx V7" process control system Material: Stainless steel brewhouse with copper cladding Dodpjw T St Uofx Addjwf Features: Mash tun kettle, mash kettle, kettle vapor condenser, lauter tun, spent grains bunker with spent grains conveyor, feed vessel, wort kettle with internal boiler, hop dispenser, spindle station, whirlpool, wort cooling, wort aeration, Various pumps, measurement and control technology, valves, control cabinets

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, PASTEURIZER machine for sale. Dwjdpewp E Hnjfx Addef Manufacturer: Tomo Varga d.o.o. Year of manufacture: 2016. The machine is in working condition and ready for operation after reassembly. Detailed information about the machine: The pasteurization chamber reaches an operating temperature of 85 to 100°C. Batch filling in carts 850x900x1350 mm, which can be carried into the chamber with a forklift and stacked on top of each other. Pasteurization is done with direct steam. The flow of steam inside the chamber is directed by a 5 KW fan. Regulation of temperature and pasteurization time from 60 to 100°C. Wall and door insulation 150 mm thick. The chamber is made of stainless-steel sheet AIS I304. Capacity 1056 polypropylene bottles of 1.5 l. The dimension of the whole machine is 270 x 300 cm It also has a smaller electrical cabinet but that can stand separate (see picture called external electric cabinet) Included with the device: 4X carts for inserting products into the chamber and an electrical cabinet with control panel (Touch screen) The device is disassembled for transport and can be viewed in this condition at the following location: Posavska ulica 59, 10372 Oborovo (Glazir d.o.o.). Working hours: Monday - Friday (from 08:00 to 14:00). For additional information, please contact via phone number listed or email for company GLAZIR d.o.o.

Condition: good (used), CSF Fryer Model BRN 3000 / 500 The fryer comes with an oil holding tank and pumping system for filling oil into and emptying oil from during deep-clean. Smaller tank inside the room that gravity drip feeds oil to the fryer to keep is continuously topped up. It was originally an electric fryer but was converted to thermal fluid heated. There is a little damage to the fryer hood, it doesn’t affect the fryer performance. Year of manufacture is 1987, its in perfect working order. Djdpsxr Rugofx Addowf Videos of it running available

Condition: excellent (used), Year of construction: 2004, overall weight: 500 kg, ATEX air micronizer mill manufactured by BACHILLER in stainless steel, model JET-MILL MSB305. High-efficiency equipment, highly suitable for the micronization of all types of powder products. Includes bag filter reference C9905. Djdpsxpx Agefx Addjwf

Condition: new, weight max. 5000 kg table turning speeds 6 - 60 m/h roll diameter 250 x 120 mm workpiece diameter 250 - 2.800 mm weight 300 kg range L-W-H 0 mm Antrieb range L-W-H 0 mm Mitläufer total power requirement 0,75 kW Stable turning The HGK_Series has two synchronously working drive units that are used for ensure continuous rotation with stepless speed control. Of the Roller spacing can be increased and decreased manually using locking pins to achieve a large diameter range of the workpieces. Characteristics: - For rotating and positioning - in the field of machine, container, plant and pipeline construction - Two synchronously running drive motors - Adjustable rotation speed. - PU castors Dwsdpfx Aoxab Awoddof - Adjustment is via bolts - Remote control Scope of delivery: - 1x controller - 1x driven unit - 1x traveling unit

Year of construction: 2010, condition: used, Sugden Engineering Twin propeller Mixing Vessel Dwsdeb Uaakopfx Addjf 200 L Stainless vessel, 2 top mounted paddle stirrers, vessel 45 degree sloped base to outlet.

Year of construction: 2018, condition: used, 2-unit brewing system mounted on a stainless steel frame as a brewing block. This consists of the following components: - Stainless steel mash/lauter tun for mashing, mashing and draining the mash. Separate control of the thermo-oil-heated frame and bottom heating. The double-walled container is encased in insulating cladding and has a polished inner surface. The motor mounted on the top drives the chopper and agitator with infinitely variable speed control. A multi-part perforated false bottom is provided for lautering and a rectangular manhole on the side for sparging. In addition, the vessel is equipped with a hinged lid, CIP spray head, temperature probe and spray unit. - Stainless steel wort pan/whirlpool. The container is double-walled and has welded heating zones in the frame and bottom, which are heated with thermal oil. The vessel is also insulated and equipped with a temperature probe, hinged lid, CIP cleaning head, spray unit, height-adjustable lock and tangential wort inlet for knocking out. Polished inner surface. - Single-stage plate heat exchanger for cooling wort from 100 °C to 18 °C while simultaneously heating water from 13 °C to 77 °C. The wort from a brew can be cooled within approximately one hour. The plates are made of 1.4401 (AISI 316) stainless steel and the seals are made of EPDM. The wort cooler has a PT1000 temperature sensor. - Thermal oil heating for heating the laser-welded heating zones of the brewing vessels. In the thermal oil tank, approx. 50-65 l oil is heated electrically to a maximum of 150°C. A safety switch ensures that the heating is automatically stopped if the temperature exceeds 160°C. The vessel is equipped with a temperature and level probe. A pump circulates the thermal oil. - 12 hl hot water tank, standing separately on three feet, with a manhole on the top. The tank is heatable, insulated and equipped with a hose level indicator, temperature probe and hot water pump. - Centrifugal pump for product transfer between the tanks and for CIP cleaning with a motor power of 0.37 kW and infinitely variable speed control. - Stainless steel pipes and manual valves for diverting the product flows. The pipes are orbitally welded and have polished inner surfaces. - Control unit with 10" touchscreen and PLC for automation of the brewhouse, housed in a stainless steel control cabinet. The following processes can be controlled and monitored from here: 1. Switching the stirring and chopping unit on/off and speed control. 2. Temperature control of the mash/lauter tun 3. Temperature control for the pan/whirlpool (separate for bottom and frame) 4. Switching the product and CIP pumps on/off and speed control. 5. Display of inlet water temperature 6. Display of wort temperature at the outlet 7. Temperature control of the thermal oil tank 8. Setting of timers 9. Setting of the mashing programme (multi-stage mashing with up to 5 stages; setting of times, temperatures, rotation speeds of the stirrer and the pump) 10. Temperature of the hot water tank. Additional title: compact brewing block with warm water tank Cast wort capacity: 5 hl Power: 38 kW Length: 2877 mm Width: 1476 mm Height: 1952 mm Operation / Control: control cabinet with PLC and touch screen Material: stainless steel 1.4301 (AISI 304) Base construction: Brewing block on stainless steel frame, separate hot water tank Dwjdpfx Adew Tbmdjdjf Features: Mashing/lautering tun; wort kettle/whirlpool; plate heat exchanger; oil heating; centrifugal pump; pipes and valves; hot ...

Condition: new, weight max. 5 t workpiece diameter 250 - 2500 mm drum diameter 250 x 100 mm Dwedpfxefv A A Us Addef feed 100 - 1000 mm/min total power requirement 0,75 kW

Condition: excellent (used), Year of construction: 2000, tank capacity: 8,190 l, total width: 2,500 mm, total height: 5,100 mm, overall weight: 8,600 kg, operating temperature: 120 °C, negative pressure: -1 Pa, pressure (max.): 6 bar, Enameled reactor manufactured by PFAUDLER, model BE6300. The equipment does not include peripherals. Djdpoxn Nibjfx Addewf

Condition: new, weight max. 1000 kg table turning speeds 180 - 1800 mm/min. roll diameter 200 x 50 mm workpiece diameter 50 - 1500 mm Dedjxabkuepfx Addjwf volt 230 V / 50 Hz range L-W-H 950 x 220 x 344 mm Mitlauf weight 100 kg range L-W-H 1270 x 310 x 344 mm Antrieb Furnishing: - Consists of a drive unit and a follower unit. - Clean, fluid turning movement even in the lower speed range. - PU rollers. - The container diameter can be adjusted quickly and easily using socket pins. - Hand remote control (3 meters) to set the speed and right / Counterclockwise rotation. - foot switch. - Compact, stable structure; easy to handle. Scope of delivery: - 1 control (integrated) - 1 foot switch - 1 wired remote control - Operating instructions in German

Condition: new, weight max. 10 t Dwodsf Ep Dijpfx Addof workpiece diameter 100 - 3200 mm drum diameter 300 x 120 mm feed 100 - 1000 mm/min total power requirement 2 x 0,55 kW

Condition: excellent (used), Year of construction: 1992, tank capacity: 535 l, total width: 1,300 mm, total height: 2,000 mm, operating temperature: 200 °C, negative pressure: -1 Pa, pressure (max.): 6 bar, Enamelled reactor with a total capacity of 535 liters, manufactured by DE DIETRICH, with jacket and agitation. ATEX marking: IIB T4. Model AE: removable top head. Components: agitation RPM tachometer, ATEX spotlight, foldable sight glass, 1.5 kW motor – 1,425 rpm, gear reducer i=15.95. Documentation: On request. Dsdpfjxn Ng Tox Addjwf

Condition: new, weight max. 1200 kg table turning speeds 80 - 1600 mm/min. roll diameter 200 x 50 mm workpiece diameter 20 - 800 mm range L-W-H 520 x 470 x 390 mm Antrieb range L-W-H dito mm Mitläufer Dwsdpfx Asxabh Hsddef voltage 230 V / 50 Hz weight 56.0 kg Description: - Device for rotating and positioning Containers and cylindrical workpieces. - Unit in solid steel construction with polyurethane-coated metal rollers. - Precise speed adjustment by Frequency converter. - Foot switch for start / stop, 4-step operation. - Switch for right / left rotation. - Rotary knob for infinitely adjustable rotation speed. - Selector switch for rapid traverse / normal operation. - Switch with indicator light for operational readiness. - HF protected Scope of delivery: - 1 drive unit with control (integrated) - 1 follower

Condition: new, weight max. 20 t workpiece diameter 150 - 3800 mm drum diameter 350 x 150 mm feed 100 - 1000 mm/min Dsdpfxof Ep Dmj Addswf total power requirement 2 x 1,1 kW

Condition: excellent (used), tank capacity: 340 l, total length: 2,450 mm, total width: 1,350 mm, total height: 1,950 mm, inner diameter: 800 mm, operating temperature: 140 °C, negative pressure: -1 Pa, Vacuum reactor model BACHMIX with a total capacity of 340 liters, manufactured by BACHILLER. Mounted on a stainless steel frame. Hydraulic system for lid lifting. Djdpfx Adexn Ngtodowf Equipped with three agitation systems: Anchor-type agitator with PTFE scrapers + two axial turbine dual-blade impellers at different heights Cowless agitator Turrax agitator

Condition: new, weight max. 3000 kg. table turning speeds 120 - 1200 mm/min. roll diameter 250 x 75 mm workpiece diameter 150 - 2000 mm volt 230 V / 50 Hz range L-W-H 1210 x 300 x 480 mm Mitläufer weight 154 kg range L-W-H 1510 x 500 x 480 mm Antrieb Furnishing: - Consists of a drive unit and a follower unit. Dwedpfx Adsxaan Sodjf - Clean, fluid turning movement even in the lower speed range. - PU rollers. - The container diameter can be adjusted quickly and easily using socket pins. - Hand remote control for setting the speed and clockwise - counter clockwise rotation. - foot switch. - Compact, stable structure; easy to handle. Scope of delivery: - 1 control (integrated) - 1 foot switch - 1 wired remote control - Operating instructions in German

Condition: new, weight max. 5 t workpiece diameter 300 - 2500 mm drum diameter 250 x 100 mm feed 100 - 1000 mm/min total power requirement 0,75 kW weight 0,6 t dimensions 1,5 x 1,0 x 0,6 m Dwodpfx Aopam Hnsddof characteristics • Self-aligning for multiple diameters • Infinitely variable speed of the drive unit • Polyurethane coating of the rollers • Optimum load distribution (4 rolls/unit), particularly gentle for workpieces with low wall thickness and sensitive surfaces • High stability due to the solid construction of the machine • CE certificate • Very good value for money • Remote control on the cable • Documentation in English

Condition: excellent (used), Year of construction: 2003, tank capacity: 14,100 l, total width: 3,000 mm, total height: 5,700 mm, overall weight: 2,800 kg, operating temperature: 150 °C, negative pressure: -1 Pa, pressure (max.): 3 bar, Reactor by E.BACHILLER, manufactured in 316 stainless steel, with agitation and jacket. Year 2003. Lower Klopper head with DN50 and DN80 connections. Side connections: DN25 and DN50. Upper Klopper head with manhole, 495 mm diameter. Connections: 5 DN25 flanges, 10 DN50 flanges, DN80, DN100, and DN150. Mounted on 4 support brackets. Vessel pressure: -1/+3 bar Jacket pressure: 10 bar Temperature: 150 ºC Dwodsxnyp Sepfx Addef Jacket volume: 340 liters. Agitator motor: 11kW at 1465 rpm.

Condition: new, weight max. 20 t Dedpfx Adjfv A A Hedswf workpiece diameter 150 - 3800 mm drum diameter 350 x 150 mm feed 100 - 1000 mm/min total power requirement 2 x 1,1 kW

Condition: excellent (used), Year of construction: 2006, tank capacity: 1,200 l, total width: 1,800 mm, total height: 2,750 mm, inner diameter: 1,190 mm, overall weight: 980 kg, input voltage: 220 V, input frequency: 50 Hz, Stainless steel reactor by TINSMACAL, 1200-litre capacity. Year 2006. Three-blade propeller agitator. Motor: 2.2 kW, 955 rpm, 50 Hz, 220 V. Dedpfx Aexnypxsddowf Manhole diameter: 350 mm. Mounted on 3 support brackets.

Condition: new, weight max. 10 t workpiece diameter 320 - 3200 mm drum diameter 300 x 120 mm feed 100 - 1000 mm/min Djdpfx Adjfv A Dcjdjwf total power requirement 1,1 kW

Condition: excellent (used), tank capacity: 2,000 l, total width: 2,100 mm, total height: 2,500 mm, inner diameter: 1,390 mm, Stainless steel reactor by TINSMACAL, 2000 liters, with jacket. Year 2007. Rear three-blade agitator. Dwjdpexnyplsfx Addef Mounted on 3 support brackets. Manhole with 350 mm diameter.

Condition: new, weight max. 60 t workpiece diameter 750 - 5000 mm Dsdpfxofv A Dns Addowf drum diameter 480 x 180 mm feed 100 - 1000 mm/min total power requirement 2 x 2,2 kW

Condition: new, weight max. 100 t Dodpfxsfv A Dvs Addswf workpiece diameter 1000 - 6300 mm drum diameter 500 x 240 mm feed 100 - 1000 mm/min total power requirement 2 x 3 kW

Condition: new, weight max. 10 t workpiece diameter 320 - 3200 mm drum diameter 300 x 120 mm feed 100 - 1000 mm/min total power requirement 1,1 kW Dodpfofv A D Iox Addjwf