Used Vibratory Bowl Feeder for sale (3,562)

Condition: refurbished (used), Year of construction: 2009, Rex stainless steel bowl cutter Capacity 125 litres With unloader arm and disc 2 speed knife shaft 1,500 / 3000 rpm 3 speed bowl Safety interlocked lid Bsdpet Da Eljfx Addjlr Currently being refurbished

Condition: excellent (used), Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Bledpfxjh Eibaj Addor Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: used, Savage Bros Firemixer, Model S-92 Complete with bowl lifter, Model 0708-80 Bedpfx Adextqwkodjlr Natural gas RPM 30-60 Power 415 volts

Condition: used, functionality: fully functional, machine/vehicle number: 40996622, type of input current: AC, input voltage: 230 V, Envelope feeder Stenz Feeder in Swiss quality. Without delivery table. Bjdewptgpspfx Addslr Envelope feeder for printing envelopes at full speed for shingling unit (e.g., on a Ryobi524GX) but also suitable as single feeder (Gto). Suction belt renewed in 2019.

Condition: ready for operation (used), Various SMT feeders are available. 12x vibratory feeders, 189x 8mm feeders, 21x 12mm feeders, 13x 16mm feeders, 12x 24mm feeders, 8x 32mm feeders, 3x 44mm feeders and 10x feeder carriages. Bljdpfx Adstz Dkaedor

Condition: good (used), In this offer you acquire a used longbow feeder "Canon BDT VX 370". Item for sale: 1 x Canon BDT VX370 suitable for: Canon imagePRESS C10000VP Canon imagePRESS C8000VP Ricoh Pro C7100 Serie Ricoh Pro C9100 Serie Condition: This is a used unit and may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The unit has been tested for function Packing and shipping: Blodpfx Aol Axtgjddjr You are welcome to view the unit during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available upon request! Before shipment or collection, a function test will be recorded on video for you. For more information, you can of course also contact us personally.

Year of construction: 2004, condition: reconditioned (used), Walter double saw with TRKS 200 feeder Bjdpfx Ajh R Tvtsddolr double saw blade cutting height 200 mm, engine power 40 kW, chain feeder with drivers with adjustable prism for different diameters. Gear to regulate the speed of feeding the material.

Condition: excellent (used), machine/vehicle number: 2069056, Equipment / Additional information: Bedew Rvu Dspfx Addjlr WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: new, New Conveyor with overhead feeder hopper Both units are mobile on castors Feeder hopper with opening end door, adjustable exit gate to conveyor Feeder hopper dimensions 800mm x 740mm x 600mm deep Bodpswd Nthsfx Addelr Conveyor belt dimensions 1800mm x 230mm W x 1260mm H Conveyor height is adjustable VFD on conveyor drive

Condition: ready for operation (used), functionality: fully functional, A good used Hopper Feeder fopr feeding small parts into assembly machine or feeding a bowl feeder with bulk parts - stainless steel conveyor - flighted belt (comes with a second spare belt also) - three phase geared drive unit - 24 V DC sensors (2) for control of belt index if required Ready to ship worldwide Blodpfx Adjw D Ev Esdjr More pictures and videos available upon request

Condition: reconditioned (used), functionality: fully functional, Rabolini mod. Imperia D, with feeder unload, with Hot Foil System 2 advances Size 80/120 cm, Pneumatich clutch, Lateral register square 3 work mode, 6 sector HOT PLATE Original HOT FOIL SYSTEM WITH 2 advances, Blsdetp T Hxspfx Addjr Feeder original RABOLINI, Review machine.

Condition: good (used), For sale: Industrial powder feeder for thermal spray systems, Sulzer Metco brand, model 9MPE DJ Closed Loop Powder Feed Unit. Equipped with powder hopper, rotameter, controller with keypad and display, as well as alarm and diagnostic functions. Bljdpeu S Tgdjfx Addor Specifications: Power supply: 115 / 215 / 230 V Frequency: 50 / 60 Hz Power consumption: 0.82 kW Single-phase supply Year of manufacture: 2000 Nameplate model: 1002 9MPE DJ Local/remote switch Outlets for carrier and inert gas Glass chamber with feeder and air vibration Condition: Very good, complete, fully functional Used in Oerlikon Metco system Documented maintenance in 2017 and 2018 Manufactured in USA, Hicksville NY Ideal for industrial applications such as thermal spraying, metalizing, flame spraying, and protective coatings.

Condition: ready for operation (used), Vibratory finishing system, Slide Grinding Machine,Circular trough vibratory finishing machine, Used Machine Manufacturer: Gránit-Ex Kft Type: FM-10, 1500 x 1500 Year: 2020 Blsdpsxdfabofx Addsr Weight: 600 kg d: 550 mm, Circumference: 1670 mm D: 1350 mm, Circumference: 3650 mm Torus: 350 mm

Condition: new, Year of construction: 2025, functionality: fully functional, Material feed unit for four-sided planer IF-100 Maximum and minimum length of workpiece: 1050 – 6100 mm Maximum and minimum width of workpiece: 50 – 247 mm Maximum and minimum thickness of workpiece: 12 – 100 mm Feed speed controlled by frequency inverter: 20–100 m/min Main motor power: 5 kW Accelerating upper feed rollers: 2 pcs Accelerating lower feed rollers: 2 pcs Driven feed rollers: 3 pcs Bsdpexz Ax Njfx Addelr Feed roller dimensions: 180 × 100 mm Feed motor power with flat chain: 0.37 kW Number of flat feed chains: 5 pcs

Condition: excellent (used), Press for gluing wood with a feeder STETON PLA 2500x1300 - Italian production - CE and DTR - year of production 1998 TECHNICAL PARAMETERS: shelf dimensions 2500 x 1300 mm six hydraulic cylinders with a diameter of 85 mm automatic glue applicator with pneumatic feed a four-section feeding table with the possibility of setting each section individually the ability to set the number of elements fed for each section element dimension min. 300x30x25 (LxWxT) mm element dimension max. 2500x160x40 (LxWxT) mm shelf pressure 260 bar max pressure of side pressure 120 bar bumper max pressure 200 bar total power 11 kW temperature max 120 " roller feed speed from 5-60 m / min feeder speed 0 -40 m / min adjustable speeds on the inverter Bedpoh Tm A Eefx Addolr roller receiving table 1400 x 2500 mm seven side hydraulic cylinders 1800 mm feeding conveyor electric heating of shelves cross feeding table 2500 x 1400 mm total length 588 cm total width 497 cm Transport dimensions 1000x 230x 220 cm weight 11 t

Condition: new, Year of construction: 2025, ZGE60 - 60Lt Vibratory Sieving Machine * Changeable sieving system * 0.34 kW vibratory motor * Start/Stop thermal switch It is used to automatically separate abrasive/polishing stones and material from each other after the deburring and/or polishing process in vibratory machines that do not have a sieving system. Blodpfxew Hpfve Addsr

Condition: ready for operation (used), 30 kw main drive 3250 rpm 1.2 kg /dcm. exelent conditions Bodpex Aurksfx Addolr

Condition: used, Schneider SF 60 Envelope Feeder: Single-sheet envelope feeder, year of manufacture: unknown, in good condition, immediately available. Bedpfx Ajx Af T Esddjlr Please request a quotation. If you are interested, we are also happy to inform you about other machines in our inventory. You are welcome to arrange an appointment to inspect the machine at our premises.

Condition: excellent (used), Robust industrial machine made in Germany: Walther Trowal, model DLT 4, year 1980. The device is intended for surface finishing of metal, aluminum, or plastic parts – trowalizing process (deburring, edge rounding, polishing, cleaning). Classic drum-type construction – reliable, heavy-duty, and durable, typical for “West Germany” manufacture. Technical data: • Model: DLT 4 • Manufacturer: Carl Kurt Walther GmbH & Co. KG, Wuppertal-Vohwinkel (West Germany) • Year of manufacture: 1980 • Drive type: ZOD71N 10 • Motor power: 0.38 kW • Power supply: 380 V / 50 Hz • Drum speed: 31 / 61 rpm • Range: 3.5 – 7 rpm • Drum diameter: Ø 70 cm • Working length: approx. 80 cm • Net weight: 825 kg Condition description: • Complete machine, drum rotates smoothly and evenly. • Perforation and internal lining in good condition. • No visible cracks or structural damage. • Requires electrical connection and possibly a basic inspection. • Ideal for tool shops, machining plants, or production lines. Application: • Deburring and cleaning parts after machining. • Polishing metal or aluminum components. • Finishing screws, bushings, stamped parts, castings, and precision components. Condition: used, robust, classic Walther Trowal construction – ready for light refurbishment or immediate operation. Bodpsxmlinsfx Addelr

Condition: used, K+G Wetter Bowl Cutter -Type: SM 90 -Power: 33 kW -Bowl capacity: 90 L -2 bowl speeds -Power supply: 380V 50Hz -Weight: 1420 kg -Made of stainless steel -Dimensions: 2000 x 1400 x 1600 mm -Sound-absorbing enclosure (Plexiglas) -Stock quantity: 1 -Condition: Used, ready to work Bedpfx Ajx A Tx Nsddslr

Condition: like new (used), Year of construction: 2003, Max. bar length 1,500 mm Bedpfx Aown Tf Ajddelr Bar diameter 4 – 85 mm Weight approx. 400 kg

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ZCVS250, total width: 1,100 mm, total height: 950 mm, overall weight: 350 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.13 kW (1.54 HP), power: 1.13 kW (1.54 HP), workpiece width (max.): 190 mm, workpiece length (max.): 190 mm, Equipment: CE marking, ZCVS 250 CIRCULAR TYPE OF VIBRATORY MACHINE * Net 250 liter volume (Capacity between 125lt to 1250lt is available up to request) * Highly wear resistant P.U.Lining (90 Shore) * Dosing pump included. * Changeable valf for the wastewater decharging *According to requested diameter size for seperator MOTOR: * High performance three phase current drive motor. * 1,1 kW 1500 rpm (Italian OLI) * The motor is lubrication free. You don’t need motor lubrication. CONTROL PANEL: * Main switch and emergency stop switch. * Timer and working hours timer Bledpjrkmv Sefx Adder * Control box with switch for engine right/left running * CE safety standard PAINTING: *Colour in RAL 5003 & RAL 7001 *Epoxy paint is used to ensure long life of the paint.

Condition: excellent (used), Year of construction: 1988, For sale: Industrial vibratory finishing machine from the renowned brand SPALECK (Max Spaleck GmbH & Co. KG, Bocholt, West Germany) – model VAT-240. Robust unit manufactured in 1988, designed for professional finishing of components. Ideal applications include: • Surface polishing Blodpfxew Ixw Ao Addsr • Deburring after machining • Edge rounding • Cleaning and surface preparation prior to painting or electroplating Works with different types of media – ceramic, plastic, or steel – depending on the workpieces to be processed. Technical data: • Model: VAT-240 • Year of manufacture: 1988 • Maximum batch load: 500 kg • Power supply: 3-phase, 380 V, 50 Hz • Control voltage: 220 V • Rated current: 20 A • Protection: 25 A • Total power: 18.1 kW • Serial number: 63712 • Included: control cabinet with START/STOP buttons, emergency stop switch, and ammeter The machine is complete, in good technical condition, and ready for operation upon connection. Heavy-duty construction, discharge chute with rubber cover, and convenient media change system. SPALECK is a German brand known for manufacturing reliable vibratory finishing machines, highly regarded by industrial plants worldwide.

Condition: new, Year of construction: 2025, machine/vehicle number: ZGS200, 200 l Capacity * 7.5 kW high-performance three-phase drive motor. * Adjustable speed control up to 300 rpm. Blodpfx Adow Hb Tfodor * Control panel and dosing pump included. - The dosing pump automatically adds the chemical to the tank * Working hours timer * PLC panel programmable on request * PU or INOX plate * Replaceable valve for wastewater drainage. * Inner tank features channels and cavities to ensure a non-stick wall.

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,370 mm, total width: 1,370 mm, total height: 1,020 mm, overall weight: 360 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.9 kW (2.58 HP), power: 1.9 kW (2.58 HP), workpiece width (max.): 240 mm, workpiece length (max.): 240 mm, ZDV Series - Circular Type Dryers For drying after deburring and polishing Corn granule is used. Various volumes in the range of 125lt - 1650lt Includes seperating system- Resistance heated Drying for all kinds of metal and non-metal materials Suitable for automation system Optional accessories Dryer machines are used to dry the wet surfaces of the parts after the process in surface finishing machines where deburring, polishing, etc. are performed. At the same time, dryer machines help to prevent corrosion of the parts Corn cobs are used in dryer machines. Hot corn cobs absorb water from the surface of the parts during process. The dryer machines have a heating system with resistance. By the help of heating system, the drying speed increases and it saves time and energy. On the machine, there is a material loading point in order to transfer wet parts to the machine easily and a discharge slider which can take out the parts after drying easily. During drying process, the parts and corn cobs move through the ramp in the bowl to the self-discharge way. Activating the slider is enough to take out the dried parts. Thanks to ergonomically designedchassis height and springs, staff can work with high efficiency. Increased resistance against vibrations, rigid and reinforced support construction; adjustable insulators flexibly mounted to absorb vibrations are some of the distinctive design features of the machine chassis. Bjdpol Sm N Tofx Addslr Electrical panels with CE Certificate designed in accordance with EU standards are used. There are main switch and emergency stop switch. The working time controller and time clock are included in the standard equipment. Three-phase electrical connection is used. It can work integrated with automation systems with PLC software. Dust absorbing system is available as an option. The dimensions of the dryer machines are designed to work integrated with the previous processes surface finishing machines. Therefore, the products from the first process are able to be transferred to the material loading point of the dryer automatically.