Used Wagner for sale (95)

Condition: used, Year of construction: 1995, Technical details: x-travel: 500 mm y-travel: 200 mm z-travel: 300 mm spindle taper ISO: SK 40 spindle head swivable left - right: je 45 ° range of revolution per miute: 45...2000 U/min Ijdpfx Acju Ndfuo Aeik headstock: dist. table - spindle center: max. 300 mm distance spindle nose and table: max. 300 mm feed:: 16...800 / 18 step mm/min table surface area: 1000 x 165 mm table swivelling to both sides: ja Grad control voltage: 380 V total power requirement: 4,6 kW machine weight approx.: 1540 kg dimension machine xH: 1,5 x 1,5 x 1,6 m The milling beam is slide adjustable with 580mm. Throat min. / max. 250/800mm *

Condition: good (used), functionality: fully functional, 2x Powder supply units (Manufacturer: Wagner) 2x Powder control units & spray guns (Manufacturer: Wagner) 1x Curing oven 1x Complete overhead rail system General information about the powder coating plant: 2x Powder supply units (Manufacturer: Wagner): without powder recovery, resulting in short changeover times Iisdexhcx Aspfx Ac Aok Curing oven: Oven dimensions (internal): Length: 6500 mm Width: 2400 mm Height: 1400 mm Maximum component weight: 750 kg Retrofitted to forced-air gas burner (approx. 85kW/h) Rail system: The system was completely renewed in 2013 Load per suspension point: 200 kg Load per suspension traverse: 400 kg Corresponding technical drawing available

Year of construction: 1989, condition: used, Axis 3 serial number 84095 tool taper BT40 toll turrets 12 table surface area 1300 x 400 mm Isdpfx Aowhqz Usc Asik no. of flutes 3 T-Nuten T-slot - width 18 mm control FANUC dimensions ca. 3000 x 2500 x 2500 mm

Condition: not inspected (used), I sell the Airless high pressure set of painting devices without guns. Iijdpsd Nnb Rsfx Ac Ajk 2 stk. high pressure pump Kovofiniš vyza 4V ratio 33:1, output pressure 9-25 MPa 1ks. high pressure pump Wagner 600 Airless 2ks. high pressure tank Kovofiniš TZ60M und TZ100M 1ks. Tank Kovofiniš. On stock. Sellable immediately. Total price 1000 Euro.

Condition: used, Year of construction: 2014, x-travel 1300 mm y-travel 500 mm z-travel 570 mm spindle taper SK40 spindle turning speed - stepless 60 - 6000 U/min rapid traverse x/y/z 7,5 m/min Number of tools 16 St. table surface area 1500 x 400 mm workpiece weight 700 kg total power requirement 12 kW weight of the machine ca. 4100 kg dimensions of the machine ca. 3800 x 3800 x 2800 mm - SIEMENS control SINUMERIK 828D - automatic tool clamping - Cooling device - automatic central lubrication - Chip tray - Full enclosure - Operation manual Iisdpfx Astt Tdmec Aek

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: LWAC450-STES-35025, For sale are two refrigeration dryers from L&WGmbH. Both are in good used condition. Both have been used very little. Both are fully functional. PRICE: 250 euros per unit! Iodpfx Aoxq A Rdoc Aeik

Condition: used, Technical details: pressure: 200 t stroke: ca. 200mm mm table surface area: L:1200xH:450 mm Iodpfju Nfrpjx Ac Ajik jaw width: 1000x200 mm total power requirement: 18 kW weight of the machine ca.: 15 t dimension machine xH: 4,5x1,5x2,2 m Beam - Straight Bending Machine - electric box (LxWxH:0,85x0,8x2,7m) - chuck intake: LxW 1200x220mm - chuck adjustment 200mm moveable - opening width of chucks 300mm - manual control accessories: - div. limit stops, tools, try square and marking gauges i.D. *

Condition: ready for operation (used), Various machines from a production line are available. 1) Band saw Wagner WPB 420. 2) Conventional soldering machine Dalex Technoplex. 3) Broaching press. 4) Guillotine shear Omag. 5) Jaw grinding machine Wagner. 6) Two electric induction heaters. 7) Two thread cutting machines. 8) Two crimping machines. An on-site inspection is possible. A package sale is preferred. Iiedpjxnbr Usfx Ac Aok

Condition: used, Year of construction: 1999, band width 221 mm length in total 1.000 mm weight of the machine ca. 300 kg +++++ Please note: Isdpfx Aewf Et Hjc Aoik The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Airless sprayer, painting device, spray pack, paint sprayer, paint spray system, paint pump, electrostatic sprayer, airless complete system, pneumatic piston pumps, airless high-pressure pump, air motor, AIR MOTOR Iiodpfx Asw U T Atoc Ask -Manufacturer: Wagner, Airless sprayer type: 33-70 with transport trolley and spray gun -Material flow: max. 12.6 l/min -Air inlet pressure: max. 8 bar, operating pressure max. 264 bar -Individual components: see photos -Dimensions: 830/680/H1140 mm -Weight: 50 kg

Condition: as good as new (ex-display), functionality: fully functional, Cobra is an exclusive high pressure double diaphragm pump suitable for Airless and AirCoat applications up to 250 bar. Cobra is the first high pressure pneumatic pump without packing. The lack of contact between the material and the external atmosphere (the pump is completely sealed), the absence of friction in the fluid section and the minimum shear make it perfect for any kind of material including the most critical ones such as reactive paints (UV paints, isocyanates, acrylics) or highly abrasive materials. The pump works with extremely low pulsation and creates a uniform paint flow, achieving a perfect spray pattern and superb surface quality. With its minimized internal volumes, the pump is designed to greatly reduce solvent consumption and material waste during flushing and color-change operations. Cobra 40-10 is the ideal solution for working with small quantities and frequent color changes – recommended for single-gun up to three-gun applications in the wood and furniture industry, small carpentry shops and joineries, and the general metal industry. Cobra® 40-10 is also ideal for feeding base or hardener for 2K mixing units (FlexControl and FlexControl Plus). Wagner membranska pumpa OMJER PRITISKA 40 :1 MAKS. TLAK MATERIJALA NA ULAZU PUMPE 20 bara DOVOD MATERIJALA M-M 36x2 Iiedpfx Aeqzx Nkec Ajk IZLAZ MATERIJALA M-G 3/8’’ TEMPERATURA MATERIJALA 10 - 80 °C ULAZNI TLAK ZRAKA 2,5 - 6,0 bara PRIKLJUČAK ZA ULAZ ZRAKA F-G ½’’ RADNI TLAK 250 bara MAKS. BRZO UDARA 200 DS/min VOLUMETRIJSKI PROTOK PO DVOSTRUKOM UDARU 10 cm3/DS TEMPERATURA OKOLINE 10 - 60 °C TEŽINA 19,0 kg MAKS. RAZINA ZVUKA 74 dB(A) MATERIJAL PH 3,5 - 9,0 pH PUMPA JE U KOMPLETU SA CRIJEVOM I PIŠTOLJEM GM4700AC

Condition: used, Wagner WDE500 Lathe Used Lathe by Wagner Wagner WDE 500 Lathe, cycle-controlled Only approx. 1,700 operating hours Turning diameter: 500 mm Turning length: 1,500 mm Control: Siemens 802 C Swing diameter over cross slide: 280 mm Spindle bore diameter: 82 mm Number of CNC-controlled axes: 2 Speed range: 20–3,000 rpm Rapid traverse speed: 5 m/min Number of turret stations: 1 Multifix "C" Tailstock: Yes, MK 5 Drive power: 7.5 kW Machine weight: approx. 3.0 t Dimensions (L x W x H): 3.3 x 1.7 x 1.7 m Cycle-controlled CNC lathe in good condition. Iijdpfexlz Rxjx Ac Ajk Accessories: - Coolant system - Base tool holder - 3-jaw chuck - Various PARAT tool holders With original operating manual Fully functional, in good condition (see pictures) Inspection, collection, and delivery available for an additional fee

Condition: used, Technical characteristics: *HYDRAULIC AUTOFEED *DISC DIAMETER 500 mms Comments: *MADE IN GERMANY Iiodps Dv Rcjfx Ac Ask

Condition: good (used), functionality: fully functional, High-pressure piston-diaphragm pump. Universally suitable for aggressive, abrasive, or shear-sensitive products. Very low rinsing agent consumption. For all applications up to 250 bar and 5 l/min. Supplies up to 8 AirCoat spray guns. + 3 automatic AirCoat spray guns with internal control for installation in automated painting systems. +FITTINGS+AIR/PRODUCT HOSE Ijdpfxoxmf Svj Ac Ajik

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 9101291, travel distance X-axis: 2,500 mm, travel distance Y-axis: 940 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 2,100 rpm, table length: 2,600 mm, TECHNICAL DETAILS Travel distances X-axis: 2,500 mm Y-axis: 940 mm Z-axis: 1,000 mm Spindle speed: 2,100 rpm Ijdpfxjxdaiqj Ac Aoik Table length: 2,600 mm MACHINE DETAILS Control: Heidenhain 355 Weight: 10,000 kg EQUIPMENT SK50 milling head

Condition: used, Year of construction: 2007, turning diameter 0500 mm turning length 1500 mm control 802 C turning dia. over face-slide 280 mm spindle bore 82 mm spindle turning speed range 20- 3000 U/min feeds - longitudinal 0- 5000 mm/min feeds - cross 0- 5000 min rapid traverse longitudinal 5 m/min rapid traverse cross 5 m/min main drive 7,5 kW Iiedpjw A Spisfx Ac Aok travel -z axis 1435 mm travel -x axis 295 mm quill stroke 150 mm bed width 350 mm weight of the machine ca. 3 t dimensions of the machine ca. 3,23 x 1,47 x 1,73 m Cycle control Siemens 802 C

Condition: used, Year of construction: 2010, functionality: fully functional, Wagner Powder painting equipment for sale! Powder coating device, year 2010 consisting of: Booth: Prima Cube 16000 Powder supply: Powder Center Powder recovery: Cyclon Filter 16000 Movement generator: KHG 350 Production process configurations INCLUDING: I. Presumes Maximum size of parts: LxWxH=2600x400x1850 mm II. Equipment Technological Conveyor automatic speed V=1.2 mtrs/min. Speed regulation between 0.5-2.5 mtrs/min 1. Pretreatment Stand MNA-3-LPG, total size 16,7 mtrs Enter size L=2,5 mtrs a. Washing, degreasing and phosphating; L=3,6 mtrs -number of spray frames – 10 -number of nozzles in frame – 18 -number of nozzles in total – 180 -delivery of the pump – 162 m3/h -power of the pump – 15 kW -vessel 4 m3 for active liquid -inner heat exchanger with LPG burner – 160 kW Ijdpjww Adtjfx Ac Aoik -temperature 500C -mechanical oil separator - solution filter -the dosing system, membrane pump with regulator -washing time – 3 min b. Dripping zone L= 3,1 mtrs -time of dripping – 2 min 30 sec c. First rinsing; L= 1,2 mtrs -number of spray frames – 4 -number of nozzles in frame – 18 -number of nozzles in total – 64 -delivery of pump – 38 m3/h -power of the pump – 3 kW -vessel 1,5 m3 for water -first rinsing time – 1 min c. Dripping zone L= 3,1 mtrs -time of dripping – 2 min 30 sec d. Fine rinsing; L= 1,28 mtrs -number of spray frames – 3 -number of nozzles in frame – 18 -number of nozzles in total – 54 -delivery of pump – 33 m3/h -vessel 1,5 m3 for water -power of the pump – 3 kW -one extra spray frame -number of nozzles in frame – 18 -fine rinsing time – 1 min e. Dripping zone L= 2 mtrs -time of dripping – 1 min 40 sec Three openings to connect to exhaust system with three ventilators Operating space made of stainless steel. Pipes made of PVC or S/S. 1 unit 2. Automatic Dryer after water AST-1-KLPG: - operating space dimensions LxWxH=7000x3000x2800 - air curtains each side to avoid heat losses - one indirect heat exchanger heated with liquid petrol gas to produce 200 kW of rated power - three blowers 6000 m3/h of air delivery - two openings to connect to exhaust system - temperature sensor and temperature regulator - overheating sensor - circulation sensor - operating space made of zinc plated steel - thermal insulation 200 mm thick - drying time 10 min 1 unit 3. Automatic Curing Oven APT-2-KLPG for curing powder paints - operating space dimensions LxWxH=10200x3600x2800 - air curtains on one side to avoid heat losses - two indirect heat exchangers heated with liquid petrol gas to produce 300 kW of rated power, of each - eight circulation blowers, capacity of each 6 000 m3/h - two openings to connect to exhaust system - temperature sensor and temperature regulator - overheating sensor - circulation sensor - operating space made of zinc plated steel - thermal insulation 200 mm thick - curing time 25 min 1 unit 4. An overhead rail conveying system ATR-ADAX, for the paint shop including the following: • straight track with hangers L=400 mm 146 mtrs • drive station 2 pc • tension station 1 pc • chain lubrication station 1 pc • drawing of the track supporting structure 1 set

Condition: good (used), Year of construction: 1990, machine/vehicle number: 90650664, Offer 24402 Technical data: - Drilling capacity in steel 50 mm - Drill spindle holder MK 5 - Drill spindle stroke 315 mm - Projection min / max 350 / 1600 mm - Column diameter 350 mm - max. / min. distance - Spindle - base plate 350 - 1250 mm - Vertical stroke of the arm 580 mm - 16 spindle speeds 25 - 2000 rpm - Feed rates 0.04 - 3.2 m/rev - Drill spindle drive 400 V / 4 kW - Lift drive 1.5 kW - Column clamping 0.75 kW - Cube table - Coolant device - Space requirement approx. W 2490 x H 2645 x D 1060 mm - Weight approx. 3500 kg Isdpfx Aceuzvzxe Asik

Condition: used, inner dimension height: 1,950 mm, inner dimension width: 1,850 mm, No. 3230 Complete paint shop Wagner Rafi / Wildcat / Finish 104 B Ex Used Complete spray room equipment Spray wall Rafi mobile 1850 x 1950 mm width x height 2 drying trolleys Iiodpfxewn Tvue Ac Aek 1 spray gun Wagner Wildcat / IceBreaker motor / pump type 18 - 40 1 Wagner Finish 104 B Ex sprayer Sale by customer order, ex location near 69124 Heidelberg, without dismantling, without transport and assembly Dismantling, loading and transportation by us optionally possible Errors in description and price reserved To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: ready for operation (used), functionality: fully functional, Universal milling machine WAGNER FCU-1100 is a milling machine, characterized by its robust construction and its worn green color. It is equipped with a modern digital control panel, a metallic working table with T-slots for fixing the parts and other visible mechanical components. Iodpfjridyrox Ac Ajik Table dimensions: 460x1440mm Spindle nose: ISA40 RPM: 8-1200 Machine equipped with: HURON type head lighting lubrication pump feeds on 3 axes visualization on 3-axes vise anti-vibrations

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 180991_03, This is a Wagner spot welding machine TYPE: 0281000-110A-AC with FELDPAUSCH nut and bolt feeder YEAR OF MANUFACTURE: 2019 Supply voltage: 40V Rated frequency: 50HZ Secondary current max: 17kA Rated power at 20% ED: 110 kVA Welding force: 1 KN at 1 bar Max. operating pressure: 10bar FELDPAUSCH nut and bolt feeder Iedpfx Acovgd Efo Asik TYPE: MSV 08

Condition: used, maximum load weight: 6,020 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 01/2019, loading space length: 7,200 mm, loading space width: 2,500 mm, loading space height: 400 mm, Year of construction: 2019, Equipment: ABS, * Overloader/Drive-over * Leaf/Leaf * Drum brakes Isdpjuz Shujfx Ac Aoik Subject to error and prior sale Viewing by appointment only WhatsApp enquiries will not be answered

Condition: excellent (used), Year of construction: 2017, Loading lift table for covered outdoor areas - second-hand : Price ex location: 6.950.-€ (net)! Manufacturer: Wagner Type: Lifting table in special design, ELS 1-10-TI-SO Year of construction: 2017 Overall height (h): 200mm Effective stroke (N): 1000mm Maintenance stroke: 1000mm Final height (H): 1200mm Overall length: 1,800mm Total width: 1,000mm Lift category: 4 Dead weight: approx. 450kg Load: Load capacity: 1,000kg Load distribution: Surface load or max. 1/6 lifted as wheel load Can be driven over when retracted: No Platform: Platform length: 1,800mm Platform width: 1,000mm Railing pluggable Iedpfsr Il Ukjx Ac Ajik Condition: very good Available: immediately Location: Stuttgart-Feuerbach 1077 Berlin A detailed item description is available on request. Application: Loading lift table for the covered outdoor area, narrow side C is at the ramp. A Euro pallet is transported with a pallet truck.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: MB116186, travel distance X-axis: 1,100 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS Travel X: 1,100 mm Travel Y: 650 mm Travel Z: 600 mm Main spindle Maximum speed: 8,000 rpm Tool changer Iijdpfowtq Skox Ac Ask Magazine positions: 24 Tool holder: BT 40 Worktable Table size: 1,300 mm x 600 mm Table load: 500 kg MACHINE DETAILS Control: Siemens 810D Machine number: MB 116186

Condition: used, Year of construction: 2012, tube diameter 51 mm wall strength 3 mm semi-automatic operated UZMA bending radius max. 225 mm bending angle max. 190 ° bending speed 35 ° / sec. mandrel length 3.100 mm engine output 5,5 kW voltage 380 V total power requirement 11,0 kW weight of the machine ca. 1,36 t dimensions of the machine ca. 4,20 x 1,60 x 1,20 m - Serial No.: 0144 - semi-automatic mandrel bending machine - bending angle is program controlled - length + twisting angle manually adjustable - digital display for twisting angle, length and bending angle - the following bending sets are included: 1.) R75 mm / Ø 20 mm Isdpfspunglsx Ac Asik 2.) R60 mm / Ø 25 mm 3.) R75 mm / Ø 30 mm 4.) R75 mm / Ø 40 mm 5.) R170 mm / Ø 50 mm 6.) R35 / flat Material 40 x 10 mm