Used Weber Cr 3 for sale (106)

Condition: used, mileage: 1 km, power: 9 kW (12.24 HP), axle configuration: 4x4, gearing type: automatic, Year of construction: 2013, GVW: 587 kg Please contact Emal Jaweed for more information Rbodpfx Adox R T Icjbst

Condition: reconditioned (used), Year of construction: 1997, operating hours: 216 h, functionality: fully functional, Equipment: documentation/manual, A reconditioned and functional profile line for rigid PVC-profiles, consisting of: Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard powder Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx.30 rpm Screw torque: 10000 Nm Motor power: 3.8 - 23.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers PMA KS40 Accessories: Mass pressure sensor and mass temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Rbodpfx Ajx Rx D Asdbot Total weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: recondition and checked for function Vacuum Calibration Unit Manufacturer: Blake Kunststoffproduktionsanlagen Type: 203-3-4,0 Year of manufacture: 1997 Serial number: 758 Total length: 5600 mm Vacuum pumps: 3 x 5.5 kW Longitudinal adjustment: electromotive Height/lateral adjustment: front and rear via threaded spindle and handwheel V2A tub: interior/exterior width: 450/700mm, length: 4500 mm Connected load: approx. 20 kW Total weight: approx. 3.000 kg Condition: recondition and checked for function Caterpillar Haul-Off Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Pads width: 300 mm Passage width: max. 500 mm Passage hight: 100 mm Effective contact length: 2400 mm Haul-off speed: max. approx. 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function Profile cross-section, max.: approx. 500 x 100 mm Note: The vacuum calibration unit, including caterpillar pull-off, can also be purchased separately.

Condition: used, mileage: 1,001 km, power: 3 kW (4.08 HP), gearing type: other, fuel type: gasoline, color: blue, empty load weight: 103 kg, first registration: 01/2017, Year of construction: 2017, driver cabin: other, Vehicle location: Bovenden, Honda GX 160 petrol engine! Includes rubber mat! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Rbedpfxexy Sw Es Adbjt

Year of construction: 2004, condition: excellent (used), WEBER 3 layer PVC foam core pipe system with: Rbjdpfx Ajt Rcn Nodbst 2 WEBER DS 9.25 DOUBLE SCREW EXTRUDER Year of manufacture 2004 WEBER DS 9.25 DOUBLE SCREW EXTRUDER Year of manufacture 2004 Application PVC foam core pipe (three layer) Only the extruders are sold, without feed block The screws and cylinders of the two extruders are in very good condition The system is in very good working order The system is my property Sahal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Germany

Condition: like new (used), functionality: fully functional, The Weber Slicer 305 is positioned as a powerful, compact, entry-level solution to high-tech industrial slicing, designed for low-to-medium volume production with maximum flexibility and hygiene. Performance & Precision High Slicing Speed: Features a circular blade cutting system with a maximum cutting speed of 400 slices per minute (rpm). Wide Thickness Range: Offers great flexibility in product output with a cutting thickness ranging from 0.5 mm up to 50 mm. Versatile Slicing Presentations: Capable of producing a variety of presentations, including stacked, staggered stack, shingled, cross-shingled, endless shingled, and folded portions. Product Capacity: Can handle product lengths up to 800 mm with a slicing throat width of 250 mm and height options of 125 mm. Operational Benefits Rbjdjxxlhujpfx Adbot Ease of Operation: Described as easy to operate and "Plug & Play" (for the Basic model).Intuitive Control: Uses the Weber Power Control with a programmable touch screen color touch display for the Basic), ensuring rapid product changeovers. Superior Hygiene: Built with Weber Hygienic Design, which includes open designs and easy-to-clean components for simplified washdown. Quick Set-up Time: Allows for fast format and product changes via tool-less adjustable components. Ergonomic Blade Change: Includes a pivotable blade safety cover for safer and ergonomic blade changes. Manual Loading: Features manual loading, making it particularly suitable for small batches, frequent product changes, or special formats.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 1600 mm y-travel 1250 mm z-travel 1600 mm B-axis (table) 360.000 x 0,001° deg milling-head swivable +/- (HV) 360.000° deg pallet size: 1000 x 800 mm table load 3000 kg tool taper SK 50-B spindle turning speed range max. 8000 U/min transmission ratio 2 spindle drive (100/40 % ED) 37/50 kW feeds x/y/z -stepless 30000 mm/min total power requirement 100 kVA dimensions of the machine ca. 11555 x 7998 x 5050 mm Additional information Universal machining center 5 axes simultaneously Original purchase price: EUR 1.295.000,- First machine installation in September 2011. A geometry measurement report (dated 30. August 2025) is available. Equipment: CNC-control Siemens 840D Solution Line Separate handheld control unit, wired, Siemens HT-2 2-station pallet changer with safety light barrier 330-position tool changer (max. tool length 600 mm) with 2nd Siemens 840 D control panel Tool taper cleaning system Special cabin with oil mist extraction system Coolant tank 3.300 liters, pump pressure 4 bar/50 bar (Q1/Q2) Chip conveyor Workpiece measuring probe Manual books Rbedpfxjydmkpo Adbjt Spare part: New ball screw. Note: The machine will be sold without tool holders, tools, and clamping devices.

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Rbsdpfx Aex Twcpedbjt

Condition: good (used), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tilt cylinder, lifting cylinder, tie rod cylinder, tilt cylinder -Manufacturer: Weber Hydraulik, hydraulic cylinder tilt cylinder stroke 110 mm Rbjdpfx Asv Tahiedbjt -Type: Clark 4334896 -Piston rod: Ø 35 mm / M30 -Dimensions: Ø 88 x 420 mm -Weight: 8.7 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -single-acting cylinder -Cylinder: Ø 100 mm -Piston rod: Ø 48 / Ø 36 mm -Pipe outer diameter: mm -Stroke: 500 mm -Total length when retracted: 570 mm -Ideal for building a hydraulic press -Number: 8 available -Price: per piece Rbjdpob A I Hisfx Adbst -Weight: 10.5 kg/piece

Year of construction: 1983, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1983 and is in fine condition. - Brand: Hans Weber GmbH - Model: ZE 30 - Year built: 1983 Rjdpfx Ajq Tr Tbjdbjbt - Single-screw extruder - Screw Ø: 30 mm - Ratio: 20 L/D

Condition: as good as new (ex-display), The scope of delivery includes: 01x waste container, second choice Manufacturer: Weber Depth lid closed: 755 mm Depth lid open: 770 mm Height 1,320 mm Lid closed Total width: 1,350 mm Capacity: 360 kg Volume: 770 liters Further data / information: Material color of garbage can: black Rbsdpoku Aw Nsfx Adbst Lid material color: yellow Usable width: approx. 1,085 mm Usable depth: approx. 640 mm Usable height: approx. 1,000 mm Material: polyethylene (PE) Tires: 4 tires (2x braked) Tare weight: 68 kg Note: Effective width and effective depth are tapered towards the bottom. General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, tank capacity: 10,875 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: Support ring made of Fe; In some areas, the flanges of the top head were welded on the inside with a stainless steel sheet by the previous operator (in some of these sheets, an opening has been cut – see photos); Manhole diameter 480 mm Speed: 78 rpm Internal diameter: 2,170 mm Total height: 5,050 mm Heating/cooling: available Power: 22 kW Max. permissible operating temperature: 220 °C Max. permissible operating overpressure: 20.0 bar Max. overpressure: 6.0 bar RW Sealing: Mechanical seal with thermosiphon vessel Agitator: Anchor agitator Standing form: Ring Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Rbjdpfxexqa Nwj Adbet Volume: 10,875 liters Double-jacket volume: 330.0 liters Cylinder wall thickness: 8.7 mm Double-jacket material: V2A 1.4301 (AISI 304) Product-contact surface material: V2A 1.4541 (AISI 321) Condition: Used Cylindrical height: 2,200 mm Previous application: Adhesives industry VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: Half-pipe coil EQUIPMENT Manhole / Dome: in top head Outlet: present Note: minor residues, manhole cover missing Outlet: 100 mm MATERIAL SPECIFICATION Flange material: Steel AGITATOR 1 Agitator manufacturer: Ekato Voltage: 230/400 Volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 11.4 mm Agitator arrangement: central in top head Top head wall thickness: 14 mm

Condition: used, Year of construction: 2011, Used Machine Year of manufacture: 2011 WEBER LCE-2-1350 (DK) Compact Wide Belt Sander with two sanding belts, suitable for calibration, veneer, and intermediate lacquer sanding. Features a constant working height and is equipped as follows: Sanding Units: Contact Roller Unit · Grooved steel contact roller Ø 210 mm for precise calibration · Mechanical adjustment of the contact roller for grit compensation · Pneumatic lifting of the contact roller Combination Unit · Grooved rubber contact roller Ø 130 mm, 60 Shore hardness - mechanical adjustment for grit compensation Rbedpfjx Hll Eex Adbet · Pneumatic lifting of the contact roller · Electronically controlled sanding pad with ISA-System 22/22 ISA (Intelligent Sanding Pressure Adjustment) · Patented segmented pressure beam system with full tolerance compensation · Pressure shoe width: 22 mm (movable longitudinally and laterally) · Universal lamella with pinpoint actuation suitable for all sanding applications (no need to change sanding lamella between veneer and solid wood sanding) · Tolerance compensation: +/- 1 mm ISA-Control · High-resolution workpiece detection with a switching roller per pressure shoe · Free feeding of complex part shapes – multiple feeding with minimal lateral spacing · Sanding intensity individually adjustable at all edges · Sanding pressure adjustable via pressure regulator · Feed-controlled infeed and outfeed Drive · Sanding belt speed from 2–18 m/s for high material removal rates · Wear-free DC braking · Self-tensioning belt drive Belt Control · Automatic compensation of unequal sanding belt edge lengths · Optical, contactless, and self-cleaning sanding belt detection on the belt change side · Fine adjustment of oscillation on the belt change side · Belt run-off switches left and right Operator Terminal ‘SIEMENS’ MP 177 6” · Graphical user interface via 6” color display · Program memory for 18 programs · Parameter settings available via program Overthickness Protection · Safety bar at machine infeed with the following functions: · Automatic lifting of contact roller and segmented pressure beam · Feed shutoff Workpiece Feed · Rubber-coated and spring-loaded pressure rollers before and after the sanding station · Secure workpiece transport with multiple feeding ensured by pressure lamella with tolerance compensation · High-quality transport belt made of natural rubber · Infinitely variable feed speeds for calibration and fine sanding · 400 mm table extension at both infeed and outfeed with rollers Technical Specifications · Working width: 1350 mm · Sanding unit drive (frequency controlled): 1 x 15.0 kW Availability: Approx. April 2026 Location: Heidelberg

Condition: used, mileage: 1 km, power: 9 kW (12.24 HP), axle configuration: 4x4, gearing type: automatic, Year of construction: 2013, GVW: 587 kg Please contact Emal Jaweed for more information Rjdpfx Aex R T H Ssdbobt

Condition: ready for operation (used), Weber 1117033 04.07 screwdriving unit 438612/KW - Length: 48 cm, used, in good condition, 100% functional, delivery as shown in the photos. Rbodpfxex Dxq Ho Adbet

Year of construction: 2001, condition: excellent (used), Single screw extruder WEBER NE5 1-30:D with 2 co-extr. WEBER ZE30 Year of construction 2001 Screw diameter 50 mm Application:PE-PP, Three-layer pipes or pipes with colored stripes The plant has manufactured heating pipes Condition: very good 2 Co-Extruders WEBER ZE30 Screw diameter 30mm The three-layer pipe system is my property Location: Rodpfx Adshy Tp Dsbsbt Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany

Condition: like new (used), Year of construction: 1990, Wide belt sander WEBER OFZ-2-1350 working width 1350 mm number of aggregates 2 1. sizing roller with the engine with power 18,5 kw 2. aggregate with the viscera with the power 11 kw brush with the power of 11 kw sweeping brush Rodpfogm Tqwox Adbobt smooth regulation of feed speed weight of the machine: 2700 kg

Year of construction: 2018, condition: like new (used), Weber screwing system: - Screw bunker with orientation and feeding system - dosing system - pneumatic feeding system - screwing gun - festo pneumatic gun travel operation system - frequency regulator 4 complete, barely used, systems for sale. Price is per set / negotiable. Screwing gun heads can be changed and adapted for multiple different types of screws. Contact for more information. Rbsdpfxoif Rvas Adbot

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, power: 44.7 kW (60.78 HP), Technical Data: Operating height: 900 mm Operating width: 1350mm Max. workpiece thickness: 99mm Min. workpiece thickness: 0.8mm Dimension of the machine: Weight: approx. 4800kg Width: approx. 2800mm Length: approx. 3460mm Rsdpfswnw E Tjx Adbebt Height: approx. 2440mm We bought the machine in 2020 and refurbished it. It comes with a new conveyor belt.

Condition: used, Spreading and pressing device with hydraulic unit WEBER type E45 / 59600.0 High-pressure unit + hydraulic spreader pliers, hydraulic spreader Year of manufacture 1988 / 1986 Hydraulic unit type E45 / 59600.0 Maximum operating pressure: 630 bar Flow rate: approx. 2 l/min Tank capacity: approx. 10 liters Spreader device - pliers WEBER type SP30 / 059 198.0 Reach (arm length): 340 mm Maximum spread distance: 810 mm Maximum spreading force in working range: 132 kN Closing force: 99 kN - Twin hose with quick-connect coupling Rated power: 0.9 kW Power supply: 220 Volt, 50 Hz Weight of hydraulic unit: approx. 40 kg Weight of spreader device: approx. 25 kg Very good condition Redpfxsdzp S Rs Adbebt Hydraulic rescue set for fire brigades with hydraulic power unit and a spreader. The spreader is used to create rescue openings after traffic accidents by spreading apart structures. Also suitable for compressing or lifting loads. Versatile in use due to the multifunctional design of the spreader jaws, made of drop-forged and hardened steel.

Year of construction: 1991, operating hours: 1,02,364 h, condition: good (used), This extrusion line from Hans Weber GmbH is in machine storage at Plastima Used Machinery. The line is from 1991 and is in used but good condition. - Brand: Hans Weber GmbH - Model: WEBER DS 6.5 - Year of construction: 1991 - Screw Ø: 65 mm - Working hours: 102.364 Redpfx Adeqpft Iebsbt

Condition: used, functionality: fully functional, fuel type: gasoline, overall weight: 32 kg, DGUV certified until: 03/2026, Year of construction: 2018, machine/vehicle number: 20008074, Equipment: UVV, Specifically designed for compaction of pipe collars in trenches. Other areas of application: compacting edge zones of walkways; installation of drainage systems. Due to its low weight, it is easy, flexible, and safe to operate even on slopes and in very confined spaces. Rbedpoxpu Tbofx Adbjt

Condition: good (used), functionality: fully functional, Weber Skinner Machine Function: Used in the food processing industry(especially meat and poultry) to remove skin, rind, or membranes from cuts of meat. Technical Data: Model: A-VI 520 working width: 520 mm (approx. 20.47 inches). Type of Machine: Derinder or Membrane Skinner Rsdpfx Ajxxuq Eedbebt Manufacturer: Weber Maschinenbau, a major manufacturer of food processing equipment.

Condition: good (used), functionality: fully functional, Program-controlled automatic grinding device for wet-ginding of sickle shaped Weber-knives (max. blade length 650 mm) angular adjustment of grinding disc 22°, 26°, 28° and 32° including cam disk for Weber sickle knives with a distance centre of rotor to cutting edge R400 mm (70311822) Technical Data: Model: SSG 400 Sharpening disc 50 x 25 x 20 mm Grinding disc 100 x 40 x 50 mm Drive: Transmission-brake-motor Rodpfx Adjxxt T Eobobt Electric: 400 Volt, 50 Cycles, 0,25 kW, 16 A Dimensions: 1.100 x 510 x 1.770 mm (W x D x H) weight: 300 kg

Condition: ready for operation (used), functionality: fully functional, Weber slicing line mod MCS 902 whit check weigher and outfield conveyor direct taken out off production site here in Sweden. Rbjdpeydpd Ejfx Adbst