Used Wedge for sale (472)

Condition: good (used), Technical Data for the Pallet Racking System: Racking System: SSI Schäfer Type: PR 400 Technical Data for Installation: Number of Racking Runs: 1 unit Length per Racking Run: 108,100 mm Number of Bays per Racking Run: 39 units Scope of Delivery Includes: 40x Pallet Rack Frames, used Colour: green Iodpfx Aasw Sr Rkjnstr Profile dimensions: U 70 x 50 x 3 mm Including horizontal and diagonal bracing, frame protectors, and base plates The frames are pre-assembled (welded lattice structure) Height: 3,620 mm Depth: 1,050 mm 144x Pallet Rack Beams, used Colour: green Beam type: TRN1-270-08-I INP profile: 80 x 42 mm Connector: 5 HK Clear span: 2,700 mm Max. load per beam pair: 2,100 kg, with evenly distributed load. 288x Safety Pins, used Finish: Sendzimir-galvanised For securing longitudinal beams against unintentional lifting 160x Wedge Anchors, new Manufacturer: Hilti Type: HST2 M12x105/10 Design: Carbon steel, galvanised Approved for: cracked concrete 80x Levelling Plates, used Finish: fully galvanised For levelling frames installed on uneven floors 1x Load Sign with field and compartment load ratings, manufacturer and order number Dimensions: 420 x 297 x 3 mm

Condition: good (used), 4-application chuck, wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Mouth size: Ø 330 mm Iodpef Atptofx Aanetr -Clamping force: max. 1500 daN -Thread: M16 -Weight: 83 kg

Condition: used, greates pass round over bed 540 mm swing diameter over face slide 370 mm centre distance 3000 mm centre height 270 mm turning dia. in gap 815 mm bed width 344 mm spindle bore 88 mm spindle diameter in front bearing 133 mm spindle taper 11" D1 Camlock turning speed range 18-1400 U/min turning speeds 16 3-jaw chuck Röhm Ø 315 longitudinal feeds: 0,06-1,0 mm face feeds 0,03-0,5 mm metric threading 0,4-14 mm inch threading 2-72 G/1" thread - module 0,3-3,5 mm thread - DP 8-60 Pitch tailstock quill diameter 75 mm quill stroke 230 mm taper of tail spindle MK 5 slide valve travel 280 mm upper head travel 150 mm Overall size ca. 4700 x 1100 x 1400 mm weight ca. 3200 kg power capacity 9,4 kW Accessories: 3-axis digital display Fagor Röhm wedge bar chuck Ø 315 mm Multifix steel holder size C incl. 6 interchangeable cassettes Rotating center point Turning chuck guard Rear chip guard Coolant device Work light Itjdpsxnqzxefx Aanor manual available

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Itedpfxex Hn A Tj Aansr Manufacturer: HANDTMANN / BAVIUS Type: HBZ Trunnion 120 Year of construction: 2014 Type of control: CNC Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany Machine-No.: 200XXXXX X-Travel: 1270 mm Y-Travel: 1100 mm Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Tool Taper: HSK 100 Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Spindle Turning Speed - Stepless: 14.000 RPM Max. Torque: 15000 Nm Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Machine width: 5500 mm Machine Height: 3500 mm Weight Of The Machine Ca.: 26 t Rapid traverse C-axis: max. 25 RPM Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle - Complete safety housing - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically - Tool clamping control - Cone cleaning - incl. spindle orientation

Condition: used, Year of construction: 2022, operating hours: 1,150 h, functionality: fully functional, Basic package Inventhor 6: - Load-sensing system - Fuel tank 500 liters - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged wear strips - 24V electrical control system – additional electric pump for actuating the following functions when the engine is off: - Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GRP service doors Itjdpexx N Dgefx Aanor - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: - Driveline 260 kW – EV - 2-axle semi-trailer chassis unit - Size L shredding system – 20 teeth - Size L limiter - Additional hydraulic ports 35–80 l/min - Hydraulic travel drive - Hopper extension 350 mm, watering system both sides - Hopper wedge Size L with NM brush - Rear conveyor 7 m - Overband magnet neodymium - Frame for 7 m overband magnet Delivery date by arrangement

Year of construction: 2023, condition: new, UNIVERSAL AUTOMATIC SAW AND SPLITTER PŁD- 400/20T Saw splitter is a chain saw with a conveyor used for preparing firewood , fireplace wood in large quantities . This device combines in one working cycle cutting wood with a chain saw together with its splitting and transferring to a heap by means of a conveyor belt. Purpose : mainly for companies engaged in the production of timber for commercial purposes , the machine will also find use in households , agricultural , greenery maintenance plants , forestry and municipal . TECHNICAL DATA: - cutting diameter - 40 cm - ram pressure force - 20 tons - cutting length adjustment - 25/55 cm - drives : electric 7.5 KW 3000 rpm ( optionally gasoline 13 HP ) - cutting bar motor hydraulic - sawing : STHIL chain saw - automatic high speed valve of the main piston - capacity of two hydraulic pumps - length of the splitting cycle including cylinder return 3/7 s - productivity of saw-saw splitter 4-6 mp/h - splitting knife 2/ 4 parts - height setting of splitting wedge manual - hydraulic feeder feeding the timber under the cutting guides 200 mm x 1900 mm - exit feeder receiving timber hydraulic 250 mm x 3200 mm Optional equipment at extra charge : - PLD 480 CM /30 TON AUTOMAT model ( on request ) - light transport chassis for electric model or with combustion engine - wood feeder with hydraulic loading - timber feeder 1000x 3000 Itjdpfxsh T Dfve Aaner - Wood feeder 1800 x 3000 - splitting wedge for 6-parts The basic model is equipped with the function : sawing by chain guide , moving the timber under the saw and loading the log the operator performs with hydraulic levers . Splitting and transporting the split billets by the receiving feeder is done automatically and the log pressure and setting the height of the splitting wedge is done manually by the operator . The machine is produced in a version powered by a 7.5 KW electric motor or a 13 HP gasoline engine . The P£D-400 is equipped with an automatic high speed valve , I automatically adjust the optimal force of the main piston in the working range of 7-20 tons , so that when splitting thin logs the speed increases , while with thicker logs the splitting force increases . The automatic high speed splitting valve significantly reduces the working time and significantly reduces electricity consumption . PRODUCTION-COMMERCIAL-SERVICE COMPANY "TRAK- MET" Bolesława Chrobrego Street 27/29 11-300 Biskupiec Nip.739-294-53-24

Condition: good (used), Technical Data for the Pallet Racking System: Racking System: SLP Technical Data for Installation: Number of rack rows: 01 pc. Length per rack row: 14,640 mm Number of bays per rack row: 07 pcs. Number of levels incl. ground level: 02 pcs. Scope of Delivery Includes: 08x pallet rack uprights, used Material color: Sendzimir galvanized Profile dims: C 80 x 50 x 15 x 3.5 mm Incl. horizontal and diagonal braces, base plates The uprights are pre-assembled (welded lattice framework) Height: 2,310 mm Depth: 1,100 mm 28x pallet rack beams, used Material color: grey INP profile: 100 x 50 mm End connector: 3-hook type Clear span: 2,000 mm 56x locking pins, used Material color: Sendzimir galvanized For securing the beams against unintentional lift-out Isdpfexy Ipqjx Aanstr 32x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Spec: carbon steel, galvanized Approved for: cracked concrete 16x leveling plates, used Spec: fully galvanized For leveling uprights installed on uneven floors 01x load sign with information on bay and compartment loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item will incur extra costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Heavy-duty universal carpentry circular saw, carpentry universal circular saw, miter saw, crosscut and miter saw, joinery circular saw -Manufacturer: Schneider Carpentry Machines, CNC joinery circular saw with roller conveyor, laterally movable left/right -Type: SLS 28 -Circuit saw: for crosscuts, miter cuts, bevel cuts, rip cuts, -Circuit saw: for cutting valley rafters, eaves boards, chamfers, and wedge boards -Saw unit: swivels 30°, rotates 180° -Drive motor: 11 kW -Saw blade: Ø 750 mm -Cutting height: max. 280 mm at 90° -Cutting height: max. 140 mm at 30° -Cutting width: max. 550 mm -Roller conveyors: 5020/750/H970 mm / 2000/750/H970 mm 320 kg -Saw dimensions: 2400/2130/H1600 mm 984 kg Itedsx Ityyopfx Aansr -Total weight: 1304 kg

Condition: used, Sword: 40 x 175 mm Technical data: 15 mm Ijdpfxslfdvys Aanotr Technical specifications: for wedge holes swiveling: see PDF Chain mortiser or chain cutter Fezer KF 50 for mortising mortises.

Year of construction: 1989, condition: ready for operation (used), Media Chip conveyor Yes This MORI SEIKI SL 25 was manufactured in 1989. It is a horizontal turning machine equipped with a three-jaw chuck, dead-collet head, chip conveyor, and tailstock. Clamping wedges for tools are also included. Consider the opportunity to buy this MORI SEIKI SL 25 horizontal turning machine. Contact us for more information. Application Types Turning Itodpex D R Rrsfx Aaner

Condition: new, Year of construction: 2025, Blade diameter ⌀250 - 350/30 mm Ijdpsv Dtuqofx Aanetr Scoring blade diameter (work only with ⌀300, 350 mm blade) ⌀120/20 mm Main motor power 4 kW Scoring motor power 0.75 kW Rotation speed 4000 rpm Rotation speed of the scoring blade 8800 rpm Blade tilt 0 - 45° Max. cutting length 3200 mm Moving table stroke 3400 mm Cutting width with longitudinal ruler 1250 mm Wedge ⌀350 mm Shaft flange diameter 87.5 mm Table stop ruler set to an angle of 90° - 45° accuracy ±1° Max. cutting height with ⌀300 mm blade 95 mm Max. cutting height with blade ⌀350 mm 120 mm Upper exhaust port diameter ⌀80 mm Lower exhaust port diameter ⌀100 mm Weight 650 kg

Condition: new, Center height 230 mm Center width 1000 mm Turning diameter over bed 460 mm Turning diameter without bridge 690 mm Turning diameter over support 285 mm Passage 58 mm Spindle mount DIN 55029 1 - 6" 12 speeds 25 - 2000 rpm Travel path - top slide 128 mm Travel path - cross slide 285 mm Feeds (longitudinal) 0.031 - 1.7 mm/rev Feeds (transverse) 0.014 - 0.784 mm/rev Thread (metric) 0.25 - 3.5 mm Thread (inch) 2 - 112 Gg/1" Thread (diametric) 8 - 144 D.P. Thread (module) 0.25 - 3.5 mm Motor power 400 V / 50 Hz / 5.5 kW Tailstock MK 4 Dimensions L x W x H 2020 x 1080 x 1600 mm Weight 1680 kg Accessories / Special features: • Lead and pull-spindle lathe in heavy-duty design with extensive standard equipment. Low vibration and smooth running. Including solid base and machine bed. • 3-axis digital display • 3-jaw chuck Ø 250 mm • 4-jaw chuck Ø 300 mm • Fixed and rotating steady rest • Quick-change tool holder system Multifix size B mounted, 5-part • Strong and torsion-resistant construction of the machine base and bed, which is cast in one piece from vibration-absorbing gray cast iron. • Hardened and ground bed guideways • Generously dimensioned machine bed • All guides are provided with adjustable wedge strips • Central lubrication in the bed slide • Right / left rotation can be switched on the bed slide • Removable bed bridge for machining large workpieces • Adjustable tailstock for turning cones • Guaranteed concentricity < 0.015 mm measured in the spindle nose • Closed feed gear, gears and shafts are hardened and ground • Clear control element with solid selector levers for selecting the speeds • Oil bath change gear with hardened and ground gears • Handwheels with adjustable fine scaling • Main spindle hardened and ground and running in an oil bath, as well as tapered roller bearings • Longitudinal feed, can be switched off using 4 adjustable switching cams • Mechanical foot spindle brake Iedpfxek Dn Nwe Aanetr • Lead screw cover • Acceptance protocol • Manufactured according to DIN 8606 toolmaker precision • CE compliant Delivery time: immediately, subject to prior sale Year of manufacture: 2023 (unused exhibition machine) Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1998, material width 100 - 450 mm material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 inlet roll diameter 160 mm Itjdpfxsvuugie Aaner min. material width 100 mm speed 15 m/min power requirement 75,0 kW weight of decoiler 6,4 t weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Straightening machine RMS Vario-12-70/96/127-450 with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic cropping shears HSO 150-0450 working direction from left to right as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Condition: good (used), Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Spring elements: Machine feet 4 pieces for machine tools and systems Itsdpfxswvficj Aansr -Support surface: 300 x 250 mm -Height: 35 mm -Price: complete -Dimensions each: 300/250/H35 mm -Weight 13.3 kg/piece

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Pezzolato Professional 2.0 – Complete Firewood Processing Line (2017) For sale: a complete Pezzolato Professional 2.0 firewood processing plant from 2017. The machine is in very good technical condition, having been used for only two seasons (2018–2019). Fully operational and immediately ready for use. The line includes: Itsdpfx Aex Ea Rkeanjr • Pezzolato Professional 2.0 (2017) • Reinforced “grid” splitting wedge + standard splitting wedge • Log infeed table with goose neck (2017) • 3 conveyors • 35 m³ chip container with extraction system • 2 net wrapping units • Steel structure hall 22 × 10 m Technical information: • Operation only during 2018 and 2019 • 2 sharp spare saw blades • Wedges in good condition • Complete technical documentation • Loading on site possible Price: €122,000 – negotiable Contact (important): Please contact us initially in writing via the platform. A telephone conversation can be arranged later with our German/English speaking partner.

Year of construction: 1987, condition: good (used), Cover FP42NC year 1987 with control conversion TNC320 Control Heidenhain TNC320 with handwheel / plain text and DIN ISO programming + network Speed 31.5 - 6300 rpm feed 2 - 3600 mm/min stepless Rapid traverse 4000 mm/min Ijdpspxm A Sefx Aanotr Quill Extendable quill vertical 80 mm, SK40 with clamping system DIN 2080 or DIN 69872 Axes X/Y/Z 1170/500/370 mm Rigid angle table 1400 x 555 mm, max. load 2000 kg Machine freshly serviced and mechanical service with wedge bar adjustment by Franz Singer. The control conversion took place in November. The TNC320 is an up-to-date control with similar operation to the iTNC530 or TNC640 and network connection. The machine is equipped with a chip tray and can fully exploit its strengths in the production of individual and fixture parts.

Condition: new, Year of construction: 2025, A powerful and efficient pillar drill for industrial use, 190 cm high. DEVICE EQUIPPED WITH AUTOMATIC SPINDLE FEED. The drill has an efficient cooling system with a metal spout. Equipped with 8 ROTATION SPEEDS with a speed range of: 140, 250, 380, 500, 580, 850, 1250, 1960 rpm. The machine has the function of automatically changing the direction of rotation while threading. Two work tables provide many processing possibilities. The latest generation induction motor with a properly designed belt transmission ensures high power and efficiency of the drill. Machine characteristics AUTOFEED High spindle stiffness Threading by automatic switching of left-hand rotation Left rotation switch IT HAS 8 ROTATION SPEEDS ROTATION SPEED RANGE: 140, 250, 380, 500, 580, 850, 1250, 1960 rpm The headstock, column, table and column base are made of the highest quality seasoned castings Spindle and gear shafts made of hardened and heat-treated steel Built-in LED lamp High engine power Large spindle stroke Clear control panel U-type spindle cover with limit switch, CE compliant Manually lifted work table with 360° rotation and mounting grooves The belt transmission cover is equipped with a safety limit switch CE certificate Adjustable drill chuck with key and Morse cone mounting A wedge for knocking out a cone Technical parameters MAX. DRILLING DIAMETER IN STEEL Iedpfx Aaoridqbonjtr 32mm MAX. THREADING DIAMETER IN STEEL M20mm COLUMN DIAMETER 100mm SPINDLE TRAVEL 150mm SPINDLE-COLUMN DISTANCE 265mm WORKTABLE LIFTING RANGE 820mm RANGE OF TABLE ROTATION AROUND THE COLUMN 360° MAX. SPINDLE-BASE DISTANCE 1235mm SPINDLE MOUNTING MK3 ROTATION SPEED RANGE 140, 250, 380, 500, 580, 850, 1250, 1960 rpm NUMBER OF ROTATIONAL SPEEDS 8 TABLE DIMENSIONS 334 x 334 mm BASE DIMENSIONS 310 x 380 mm MACHINE HEIGHT 1900mm ENGINE POWER 1.5 kW FEED MOTOR POWER 0.12 kW POWER 400V NET WEIGHT 310 kg SIZE OF THE PACKAGE 1040 x 640 x 2050 mm

Condition: good (used), Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Baking: soft -Mouth size: Ø 200 mm -Weight: 22 kg Iedpfxeb A Rdzs Aanstr

Condition: good (used), Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -without: interchangeable jaws -Mouth size: Ø 225 mm -Cone: Ø 106 mm -Weight: 28 kg Itedpfob A Smwsx Aansr

Condition: good (used), Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck -Mouth size: Ø 250 mm Isdpfx Aaodq Nftonetr -Recess: Ø 230 mm -Bolt circle: Ø 200 mm -Quantity: 2 available -Price: per piece -Weight: 35 kg

Condition: good (used), Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, fixings, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: 10 pieces, for machine tools and systems Itsdpfx Aaex Exz Rensr -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 440/210/H255 mm -Total weight: 24.4 kg

Condition: good (used), Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, fixings, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: 2 pieces, for machine tools and systems -Minimum height: 280 mm -Max. height: 468 mm -Submission/Price: complete Itodpfx Asx Exvhoanjr -Dimensions (each): 220/190/H280 mm -Weight: 9.9 kg/piece

Condition: good (used), Year of construction: 1981, Wedge snowplow, snow plug, dozer blade, clearing blade, snowplow, snow pusher -Manufacturer: Schulte-Henke, Snowplow type RKS 200 DFG 4035 A Itedpjqxvwyefx Aanor -Sign length: 2000 mm -Plow height: 520 mm -with: Spring-loaded flap drive-over system -Recording: Dimensions see photo technical drawing -Plow: mechanically adjustable -Attachment: to forklifts or similar -Transport dimensions: 2000/800/H660 mm -Weight: 230 kg

Condition: good (used), Square broaching tool, multi-wedge broach, broaching tool, broaching needle, grooving tool, keyway broaching tool, keyway broaching needle Itjdpfxjwt N H Ts Aaner -Manufacturer: HS Hasseay Savage, broach push broach -Type: 11622 J9 HSS M-2 -Keyway width: 22 mm -Quantity: 1 piece available -Dimensions box: 495/50/H50 mm -Weight: 2.8 kg

Condition: good (used), Square broaching tool, multi-wedge broach, broaching tool, broaching needle, grooving tool, keyway broaching tool, keyway broaching needle -Manufacturer: HS Hasseay Savage, broach push broach -Type: 11518 18MM V -Keyway width: 18 mm -Quantity: 1 piece available -Dimensions box: 395/40/H40 mm Isdpfx Aaowt N Hyjnstr -Weight: 1.3 kg