3-jaw wedge bar chuck, lathe chuck, clamping chuck

FORKARDT F+160

Condition: new, grinding range 2 - 13 mm Bwodpeupxdqsfx Ak Tjr sharp cornered angle min./max. 90 - 140 Grad connected load 230 V weight of the machine ca. 10 Kg dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Condition: excellent (used), Year of construction: 2004, Carl Cloos GLC 503 Quinto SD welding machine. A total of 4 units available. Year of manufacture: 2004-2004-1999. Price refers to 1 unit. Bwedpfx Aotkuk Rjk Tsr

Year of construction: 2010, condition: excellent (used), Three-jaw chuck Bodjfb T Dbspfx Ak Tswr Manufacturer: Forkardt Model: F 250 Threaded spindle: 105 x 6 mm Cylinder diameter: 105 mm Outer diameter: 250 mm Inner diameter: 63 mm Chuck height including flange: 180 mm Age is estimated.

Condition: used, CNC tool milling machine MAHO, type MH 400 E Machine no. 43072, year of manufacture 1989 Travel distances X: 400 mm, Y: 250 mm, Z: 375 mm Table size 700 x 270 mm Distance spindle nose / table max. 410 mm Tool holder ISO 40 with draw bolt type B Spindle speed 80 - 4000 rpm, 18 steps Bwsdeh Ic Ufopfx Ak Tor Feed rate 1-1500 mm/min, stepless Rapid traverse (X, Z and Y) 2.5 m/min. Quill travel, vertical 50 mm Spindle drive 2.2 kW Power connection 400 Volt, 50 Hz, 19 kVA - swiveling control panel with CNC path control PHILIPS 432 - LCD monitor VISCOTECH - hydro-mechanical tool clamping system - pivoting device for the vertical milling head - splash guard cabinet as a table enclosure with 3 fold-up doors - electrical control cabinet fixed to the machine - V24 (RS 232) interface for data transfer - 52470 operating hours, main switch on - fixed angular table - coolant system with coolant pump located next to the machine - central oil lubrication system Vogel - operator's manual, electrical wiring diagram Space requirement L x W x H 2250 x 1800 x 1850 mm Weight approx. 1.5 tons good condition

Condition: excellent (used), Year of construction: 2019, operating hours: 403 h, functionality: fully functional, turning length: 1,200 mm, spindle bore: 120 mm, controller model: Siemens 840 Dsl, Equipment: documentation/manual, Technical data: Turning length 1200 mm Chuck diameter 350 mm Working stroke X top/bottom 200 mm Working stroke Y. axis 210 mm (+130/-80) Working stroke Z. axis 1200 mm Maximum travel speed W/X/Y/Z meters/minute 45/40/40/46 Ball screw diameter W/X/Y/Z mm 40/40/40/40 Profile rail guide, B/X/Y/Z mm 45/45/45/55 Tool flight circle 700 mm Maximum center distance 1200 mm Main spindle/counter spindle Spindle bearing diameter 120 mm/160 mm Spindle passage 65/105 mm Spindle bore diameter 80/120 mm Bedpfxevw Upcs Ak Tjwr Spindle flange/spindle head DIN 55026 A6 / A8 Drive power 100% ED 22 KW/67.4 Drive power, 40% ED 24 KW/80 Nominal speed 1400 rpm Maximum speed 5,700 rpm Torque 100% ED 150 nm/585 Torque 40% ED 191 nm/795 C-axis resolution 0.001 degrees Both turrets: Tool holder: VDI 40 Maximum speed rpm 6000 torque drive 12,000 speed drive Maximum drive power kW: 28.5 torque drive 23.5 speed drive Maximum torque (25% ED) Nm: 85 torque drive 56 speed drive Dimensions: 4500 x 2500 x 2500 Weight approx. 16000 kg Control: Siemens 840 Dsl

Condition: used, Year of construction: 1998, operating hours: 75,336 h, functionality: fully functional, machine/vehicle number: T62204, Equipment: documentation/manual, TECHNICAL DETAILS - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 mm - Max. machining length: 200 mm - Spindle speeds: 10,000 rpm - C axis indexing precision: 0.1° COUNTER SPINDLE - Max. bar diameter: 20 mm - Spindle speeds: 10,000 rpm - Spindle power: 3.7 kW - C axis indexing precision: 0.1° - Number of guide bush holders: 2 GUIDE BUSH HOLDER 1 - Number of positions: 5 GUIDE BUSH HOLDER 2 - Number of positions: 5 - Number of driven positions: 4 - Live tooling speed: 8,000 rpm END ATTACHMENT - Number of positions: 4 - Number of driven positions: 4 - Live tooling speed: 6,000 rpm SECONDARY OPERATION - Number of positions: 7 - Number of driven positions: 3 - Live tooling speed: 8,000 rpm POWER SUPPLY - Supply voltage: 400 V - Total installed power: 14 kW WEIGHT & DIMENSIONS - Machine footprint: 2,270 x 1,650 mm - Machine height: 2,200 mm - Machine weight: 3,500 kg EQUIPMENT - CNC: Fanuc - Driven tool motor at: S2, S3, S5 vertical/horizontal - Rotating guide bush Bwsdpfew Stndex Ak Tor - Parts catcher - Workpiece ejection - Coolant tank - Bar loader: ROBOBAR SSF

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 880 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,84 t dimensions of the machine ca. 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE!! Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Bwedpfx Aksupw R As Tjr Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm. Inclusive: - Micro-spray device - Leveling elements

Condition: new, Center distance ----- 1500 mm Center height ----- 230 mm Turning diameter ----- 460 mm Main spindle bore ----- 58 mm Bed width ----- 300 mm Spindle speed ----- 25-2000 rpm Motor ----- 5.5 kW Weight ----- 2220 kg INCLUDED * 3-axis digital readout, brand SINO * Quick-change tool holder, type Multifix TOOB2, with 4 tool blocks * 3-jaw chuck, 250 mm * 4-jaw chuck, 320 mm * Faceplate, 350 mm * Stationary and follow rest Bjdpfx Aega Tv Esk Tjwr * LED work light and coolant system * Electric brake * Foot brake * Box with various tools

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 0816, Compact, high-precision CNC rotary table dividing head with control. Suitable for single-piece or small-batch production in mechanical engineering. A horizontal or vertical configuration is possible. Available for immediate delivery. Bjdpobatamofx Ak Towr - Made in Germany - This dividing head is particularly suitable as a 4th axis on engraving and milling machines for milling, engraving, laser cutting, drilling, grooving, or for use on a tool or surface grinding machine. Square, hexagonal, gear milling with any pitch, or 3D machining is possible. Extremely precise and accurate - the worm gear is designed with a maximum reduction ratio of 100:1, which was specifically designed by us and is not a standard component. Output torque well over 70 Nm. The max. clamping diameter is 250 mm. Center height: 125 mm. The drive is via a controlled stepper motor with 200 steps and 7.5 A, with a holding torque of 9.7 Nm. Possible adjustable indexing accuracy at the output: 0.00028125 degrees with 1/64 step programming. The worm gear pair is four times ball-bearing mounted and adjusted for zero backlash, and can also be readjusted. The bearings are from FAG/SKF. The one-piece, stable output spindle is fitted with a faceplate, d = 200 mm, with an internal taper MK 3 and a through-hole of 20.3. Weight 26 kg. Accessories: Optional USB data cable for programming. Optional compressed air connection. Optional 200 mm 3-jaw chuck Optional protective shield with integrated proximity switch for automatic operation. Keys, complex scales, cross-holes, or gears can be quickly produced. The electronic control unit as a handy module with 14 travel programs and 2 reference point travels, as well as step monitoring with a power supply, is included in the package. The toolbox module is made of metal. The optimized pre-programming is done in 360, 180, 120, 90, 72, 60, 45, 30, 10, 5, 1, 0.02, 0 degree incremental positioning steps. Repeat cycles, right and left travel, and cycle pauses can be programmed. With the software you can: program travel programs and cycles, program absolute or incremental travel values. The actual value can be displayed very comfortably at any time in the software. With one output, you can exclusively receive start pulses from an NC machine. Keys, complex scales, cross-holes, or gears can be quickly produced. For your applications, standard clamping devices are offered, and we also have the possibility of quickly and inexpensively manufacturing special clamping devices for you. Furthermore, solutions for special rotary tables can be implemented on request. With warranty, German operating manual, and after-sales service since 2006. 1500 Roundinho rotary tables in use worldwide.

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0625004, Offer 24603 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS Bwsdpsvncqvjfx Ak Tsr - water cooling device FRONIUS - separate wire feed case - intermediate package device - wire feed case 10 linear meters - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA - space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg