Used Wedge for sale (471)

Condition: excellent (used), GALDABINI Type: Quasar 50 / Nominal Capacity: 50 kN with PC, monitor, and GraphWork 5 testing software Universal Testing Machine The "QUASAR" universal testing machines are designed as single-room testing machines and essentially consist of the following components: Machine frame. The design and structure of the machine load frame is designed where necessary for the specified maximum loads: Electromechanical load application with toothed belt drive, toothed belt pulleys, drive with DC or brushless servo motor, and recirculating ball screws. Load measuring system with load cell suitable for tension and compression. Electronic control unit that performs all functions: Regulation and control, monitoring, and recording of the output signals of the measuring amplifiers for force, strain, and crosshead travel. The system is based on a 32-bit processor with a clock speed of 25 MHz; The analog signals are acquired by an A/D converter with 20-bit resolution. The electronic control system is usually located in the base of the machine. This also applies to most of the electrical components of the drive and power supply. Nedpfxov Tywqj Aanolk The operator interface is connected to the PC via an RS232 serial interface with a high transmission speed of 38400 baud. Rigid two-column system with a maximum capacity of 50 kN. Suitable for metals, plastics, composites, and other materials. Stylish design and advanced features. Flexible and modular design for easy future expansion. Key technical advantages include extremely high resolution of load and stroke values, as well as a minimum test speed of 0.0005 mm/min for the highest performance and most accurate results. Technical specifications: Nominal capacity: 50 kN Speed at maximum load: 0.0005÷200 mm/min No-load speed: 500 mm/min Distance between clamps: 1000 mm Total stroke: 1000 mm Crosshead travel resolution: 0.1 µm Positioning repeatability: 2 µm Distance between wedge clamps: 480 mm Clearance between columns: 410 mm Unit of force Newton - daN - kgf - Ibs Dimensions: Height: approx. 1548 mm Width: approx. 700 mm Depth: approx. 730 mm Power supply: 220V (+10%) 50 Hz Power consumption: 0.65 kW Weight: approx. 255 kg without accessories Recommended lighting during use: 300 lux Weight: approx. 255 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Fixators, leveling units, leveling elements, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements, vibration dampers -Machine feet: Vibration dampers, 6 pieces, for machine tools and systems -Spring element: Ø 106 mm -Support height: approx. 39 mm -Mounting hole: M12 -Hole spacing: 140 mm -Price/Fee: complete -Dimensions: 170/110/H50 mm Nedpfsxwl H Ujx Aanelk -Weight: 0.8 kg/piece

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Universal testing machine PM3 Force: 3 kN cross beam stroke: 520 mm Working area depth: 66 mm Nedpfx Aajfdzupsnelk total height: 1036 mm Weight: ca.40 Kg Travel resolution: 0.01 mm testing speed: 1-500 mm / min Cc7d2rmq Return speed: 700 mm / min Force transducer: 3 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Condition: as good as new (ex-display), Year of construction: 2013, - Universal milling head - Fixed angle table 670 x 320 mm - coolant device - Chip tray - Quill cover - Set of operating tools - Technical Documentation - CE version - Colour: * RAL 5015 - sky blue * RAL 7035 - light gray Special accessories: - SINO 3-axis position indicator: € 1,995.00 - 1 set of adjusting wedges (4 pieces): € 400.00 Technical specifications: Work table: - Clamping surface of the fixed angle table: 670 x 320 mm - T-slots: number / width x spacing: 5/12 x 63 mm - Max. Workpiece weight: 150 kg - Vertical clamping surface: 670 x 220 mm Nodpjg D Rhhjfx Aanjlk - T-slots: number / width x spacing: 3/12 x 60 mm Work spindle: - Horizontal and vertical tool holder: ISO / DIN: 40/2080 - Main drive motor power 100% ED: 1.5 kW Vertical milling head: - Speed ​​range: 45 - 2,240 rpm. - Speed ​​levels: 18 - Manual adjustment of the quill: 60 mm - Swivel range: 360 degrees Travels: - X-axis automatic / by hand: 280/300 mm - Y-axis automatic / by hand: 250/270 mm - Z-axis automatic / by hand: 300/310 mm Feeds: - Feed range: 12.5 - 630 mm / min. - Number of feeds: 18 - Rapid traverse: 1,200 mm / min. Measures and weight: - Length: 1,265 mm - Width: 1,080 mm - Height: 1,620 mm - Weight approx. 1,000 kg Machine inspection / machine acceptance: Before loading the machine SUBJECT TO ERRORS AND PRIOR SALE!

Condition: like new (used), Below you will find the complete equipment of the offered machine, structured clearly and presented in an organized manner. ⸻ Material Handling & Safety • Work area lighting, rear • 2D code scanner Material Handling • Support console with plastic overlay • 3× ball roller supports (for bending aid / support console / table extension) • 3× brush supports (for bending aid / support console / table extension) • Bending aid first arm with plastic overlay • 2× table width extensions with plastic overlay • 3× table length extensions (for bending aid / support console / table extension) • Parking position right 900 mm Safety • BendGuard ⸻ Automation – ToolMaster (KB29) Machine Base • Stable steel architecture with concrete foundation • Upper tool storage with CNC rotary axis • Lower tool storage with CNC rotary axis • Push-chain manipulators for upper and lower tools • Magnetic gripper system • Position monitoring • CNC turn-over and transfer station for upper tools • Transfer station for lower tools • Right-side machine placement • Control cabinet climate control for ambient temperatures up to 40°C Control • LENZE, integrated into TruBend machine control Safety Equipment • Light curtain (vertical & horizontal) with fixed reflector • Communications rail • MobileControl • Standard safety devices • Side sliding doors • Rear rolling shutter ⸻ Standard Machine Equipment Machine Construction • Robust machine frame • Press beam • Spherical support for press beam with tilt functionality • On-demand servo drive (4-cylinder technology) • Length measuring system (Y-axis) with dynamic deflection compensation • Hydraulic oil fill (lifetime fill) • Control cabinet climate control for temperatures up to 40°C Crowning • Manual wedge crowning Backgauge • 2-axis backgauge (X & R) • 2× backgauge fingers Tool Clamping • Manual upper tool clamping • Hydraulic lower tool clamping Lower Tool Movement • Pneumatically actuated I-axis Control • Touchpoint TruBend • Integrated TRUMPF technology data • Support arm with height adjustment • Network capability • Teleservice via Internet Operator Ergonomics • Foot switch ⸻ Extended Machine Equipment Increased Performance Features • Increased installation height/stroke: +230 mm • Increased working speed at maximum press force Crowning • CNC-controlled crowning Backgauge • 6-axis backgauge Tool Clamping • Hydraulic upper tool clamping Lower Tool Movement • CNC-controlled I-axis Control / Operation • Keyboard & mouse (incl. holder) • Additional monitor • Shop floor programming: TecZone Bend Angle Assistants • ACB Laser – Automatically Controlled Bending • Angle assistant package (ACB Wireless + TCB) Other Operator Aids • MagicShoe function (incl. initial equipment) • MobileControl Pro • Tool indicator • Front work area lighting Nsdpfxsx Aphge Aanelk

Condition: new, Year of construction: 2025, Take advantage of our range of plastic grinding media for processing softer materials such as brass, copper or aluminium. Plastic grinding media provide a gentler and more delicate surface treatment. Like ceramic media, our plastic grinding media are available in a wide variety of grit grades, shapes and sizes. We work closely with you to select the optimal media for your specific workpieces and process requirements. Nsdpox A Eq Dsfx Aanslk Overview of the different shapes and their characteristics: - Cones (K): Have a high specific weight, ensuring effective material removal. Their rounded shape offers gentle processing. - Pyramids (P): Their edges make them particularly suitable for deburring operations. The pointed shape allows access to hard-to-reach areas such as bores. - Tri-Prongs (DZ): Excellent for processing complex components such as gear parts or workpieces with grooves. - Paraboloids (PA): Similar to cones, their rounded form is ideal for smoothing and polishing. Workpieces are treated softly and uniformly. - Lenses (L): Due to their lower weight, they are suitable for soft materials, offering gentle and even material removal. - Wedges (K): The versatile geometry makes them ideal media for deburring. The sharp point accesses narrow or hard-to-reach slots. - Tetrahedrons (T): Like pyramids, their edges enable efficient deburring. Tetrahedrons, however, have more sharply tapered corners, making them better suited for complex geometries. If you are interested, we look forward to hearing from you. We will be pleased to offer you advice, obligation-free. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer serves exclusively as an online presentation of our products. Contract negotiations are conducted via telecommunications (e-mail, phone, messaging portal). As a first step, we will provide a non-binding quotation, along with our general terms and conditions, legal notice, and your right of withdrawal before any purchase or contract is concluded.

Condition: used, functionality: fully functional, Manufacturer: Haaf (formerly Gema) Type: LZ 185 Swing diameter over bed: 365 mm, over cross slide: 225 mm Turning length: 750 mm Center height: 185 mm Spindle bore: 40 mm Speed range: 20 – 1,600 rpm Heidenhain VRZ 773 B digital readout in 2 axes (scales on cross slide, longitudinal slide and compound slide) Dimensions: 1,900 x 900 x 1,700 mm Weight: approx. 800 kg Features: Nlodpfx Asw Svtceanek - Spindle brake with foot pedal - Adjustable stop on cross slide (disengages feed) - Splash guard Accessories: - Operating manual - Multifix B tool holder with 2 inserts - Coolant pump integrated in machine base (no coolant hose connected) - Forkardt 3-jaw wedge bar chuck 200mm - Albrecht drill chuck 1-13mm Total weight approx. 950 kg Condition: Used The machine runs smoothly and can be inspected under power.

Year of construction: 2024, operating hours: 375 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 2334006P, For sale is a well-used stationary Posch K 540. It is powered by a PTO shaft. For an additional charge or by agreement, a stationary diesel engine with 120 hp (approx. 5.5 l per hour) can be included. Maximum diameter is 55 cm, log length is adjustable from 25 cm to 50 cm. Splitting force is 35 tons. Conversion to electric motor is possible. The price includes approximately 30 guide bars and 60 saw chains (some new and some used). The splitting wedge is an 18, diameter 25. Nsdpfx Asxzqy Ueanslk

Year of construction: 2025, condition: as good as new (ex-display), Universal testing machine PM3 Force: 3 kN cross beam stroke: 520 mm Working area depth: 66 mm Nlodsd R Dpuepfx Aanek total height: 1036 mm Weight: ca.40 Kg Travel resolution: 0.01 mm testing speed: 1-500 mm / min Return speed: 700 mm / min Force transducer: 3 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks Nlodpfjw U Abrjx Aanek -Top jaws: 8 sets of soft top jaws for key bar chucks, helical toothed -Jaw width: 32 mm -Dimensions: see photo technical drawing -Transport dimensions: 470/310/H90 mm -Total weight: 47 kg

Condition: ready for operation (used), functionality: fully functional, saw drive: 13,200 W, Well-maintained complete width-adjustable sash saw system LINCK type BV. Right-hand machine. Frame width 760 mm, stroke 600 mm, max. passage height 710 mm. Complete with log infeed, sash carriage with auxiliary carriage. Split wedge with roller conveyor, cross transfer, and model return. Sash saw with new saw tensioners. Reducing gear and frame including 132 kW motor with belt drive 310 rpm. Various spare parts can be purchased as a package. Dismantling at buyer's own responsibility. Full truck loading after dismantling can be offered. Nljdpfxoxt Uvqe Aanek

Condition: used, mileage: 1,28,636 km, power: 185 kW (251.53 HP), first registration: 06/2021, fuel type: diesel, empty load weight: 11,800 kg, overall weight: 18,000 kg, tire size: 315/60 R 22.5, axle configuration: 4x4, color: blue, gearing type: automatic, suspension: steel-air, total length: 5,500 mm, Equipment: ABS, air conditioning, all wheel drive, cabin, sliding door, Interior paneling, road approval, drum brake, steering axle, suspended front axle, suspended cab, central lubrication, reversing alarm, seat heating, radio/MP3, radio/CD, heated exterior mirrors, speed limiter system, trailer coupling preparation, engine Volvo TAD881 VE 6-cylinder including engine brake, transmission ZF 6WG211 incl. torque converter lock-up clutch (6 forward / 3 reverse), steering axle Kessler type LT61PL375 (ratio 9.53:1) with simplex wedge drum brakes and parabolic leaf suspension, rear axle Kessler type D81PL478 (ratio 9.76:1) with drum brake, air-suspended, steering full hydrostatic orbital steering system with priority valve, left-hand drive position with rotating seat function, roof window, integrated ballast in vehicle front, additional connection for 2-line brake system, 2 x Duomatic coupling, NATO jump-start socket (24 V), 7-pin trailer socket ISO 1185, ABS cable and socket (ISO 7638/4091) 1x at rear crossmember, 1x behind the cab, 15-pin socket (DIN 12098) 1x at rear crossmember, 1x behind the cab. Operating hours: 11,571 h Nedpfx Aajxz Dpcenelk

Condition: as good as new (ex-display), Year of construction: 2025, Japa® 505 PRO: Top Performance and Versatility for the Highest Demands Advanced Splitting Technology with Perfect Split In addition to the proven Perfect Cut saw system, the PRO model features a unique Perfect Split splitting blade. When combined with the conventional splitting blade, it consistently ensures uniform and high-quality firewood production. Switching between splitting methods takes just a few minutes, highlighting the extraordinary versatility of this machine. State-of-the-Art Cleaning with Perfect Clean The Japa® 505 PRO is equipped with the innovative Perfect Clean cleaning system, which efficiently removes sawdust, wood chips, and bark from the finished product. This guarantees clean and tidy firewood, reducing the machine’s cleaning requirements and significantly optimizing workflow. Clean firewood dries faster, burns better, and achieves a higher resale value. Nsdpexx T Aaefx Aanolk Patented Hydraulic Chain Tensioner The patented hydraulic chain tensioner ensures smooth and safe sawing at all times. It extends the service life of both chain and saw blade and allows for tool-free chain replacement in seconds. Additionally, a hydraulic feed roller at the start of the infeed conveyor makes transporting large logs easier—providing improved ergonomics, safety, and production efficiency. Technical Data: Log diameter: 500 mm Splitting force: 16 t Splitting wedge: 6-way Log length: up to 50 cm Oil capacity: 100 l PTO speed: 500 rpm Motor output S1: 15 kW / 400 V Gear oil: 80W 90 Conveyor belt length: 4400 mm Weight: 2330 kg Original photos & honest descriptions. Shipping by arrangement. Fair prices. ❓If you have any questions, just contact us – we reply quickly and courteously!

Year of construction: 1950, condition: good (used), 4 wedge-mounted knives 400mm wide length of the tops about 2250mm Adjustable culaga at an angle table adjustable up and down manually machine ready to work, technically in good condition, Nljdpjimd Hwjfx Aanok

Year of construction: 2024, condition: as good as new (ex-display), Universal testing machine PM5 Force: 5 kN crosshead stroke: 520 mm working chamber depth: 66 mm total height: 1036 mm Weight: approx.48 Kg travel resolution: 0,01 mm test speed: 1-500 mm / min Return speed: 700 mm / min Force transducer: 5 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, so that a "quick test" can also be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. Njdped R Dqbofx Aanelk This enables you to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & Commissioning -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping fixtures: Pressure plates, bending fixtures, shear fixtures, wedge grips, shear grips, peeling grips, screw grips, pneumatic grips and hydraulic grips.

Condition: good (used), Year of construction: 2018, Self-clamping wedge grips 100KN. The wedges remain stationary over the shaft when the initial gripping force is applied to the specimen, preventing excessive compression of the specimen prior to testing. The clamps are used with cross-hatched jaw faces for clamping flat specimens. Clamping dimensions H75mm W50mm Opening width 14mm Nledeupfk Depfx Aanek

Condition: used, Technical details: bore capacity in steel (diameter): 30 mm throat: 260 mm bore stroke: 160 mm spindle taper MT: MK3 feed steps: 0,1; 0,2; 0,3 mm/U und manuell spindle speed:: max. 1800 stufenlos U/min Distance spindle/table max.: 750 mm table clamping surface:: L: 280 x B: 355 mm table rotating: nein ° clamping table - swivable: 360 Grad drill table adjustment: vertikal: 600 mm column diameter: 130 mm threading: Nein / no total power requirement: 1,1 kW weight of the machine ca.: 570 kg dimension machine xH: 0,9 x 0,9 x 1,9 m This machine has 2 tables. Drilling table LxW: 370 x 500 mm Nlsdpfsva Higsx Aanok Attachment table: LxW: 420 x 750 mm Clamping surface = 320 x 600 mm, transverse displacement (X-axis) 250 mm possible Ejection of tool via ejector wedge accessories: vice machine base *

Condition: new, Year of construction: 2025, functionality: fully functional, SCHORR Wood Splitter 30t HS-30PE PRO With a splitting force of 30 tons, the SCHORR HS-30PE handles even the toughest wood and large logs with ease. Its heavy-duty design (own weight 390 kg), low-wear hydraulic system, and high-strength steel frame ensure a long service life, ultimate stability, and reliable operation—even in continuous use. Combined Drive: PTO & Electric Motor The HS-30PE can be operated either via PTO (540 rpm) or the integrated 400V electric motor. This offers maximum flexibility: mobile operation in the forest with a tractor, or emission- and noise-free at the yard. Robust Design—Engineered for Heavy-Duty Use The construction features high-strength steel components and a stable splitting wedge guide. Sturdy support legs provide firm footing, and large transport wheels ensure easy relocation—even on uneven terrain. Splitting Length up to 110 cm Even long trunk sections are processed with ease. The solid splitting blade made of tool steel guarantees a precise splitting line and minimal wear. Integrated Timber Lifter—More Comfort & Safety The timber lifter allows easy, effortless positioning of heavy logs and also acts as a protective guard—greatly simplifying everyday work. Two Return Modes & Speed Settings -- Automatic Return: The splitting wedge automatically returns to the preset position—ideal for fast operation. -- Manual Return: For precise splitting, particularly with irregular wood. In addition, there is a fast advance mode and a slow, high-power mode for actual splitting. Nljdjw R N Hmopfx Aanek Practical Features for Everyday Use -- Lowerable cylinder (down to 1.99 m) for easy transport and space-saving storage -- Two-handed safety operation for maximum protection -- 3-point hitch (Cat. I & II) for convenient tractor transport Technical Data -- Manufacturer: SCHORR -- Model: HS-30PE -- Splitting force: 30 t -- Weight: 390 kg -- Drive: 400V electric motor (5.5 kW, 16A) or PTO Dimensions: -- Length: 1550 mm -- Width: 1150 mm -- Height: 2500 mm (lowered 1990 mm) -- Hydraulic cylinder: Ø 13.8 cm -- Piston rod: Ø 7 cm -- Splitting wedge: 26 cm -- Log diameter: max. 40 cm / min. 8 cm -- Wedge-ground clearance: 16 cm Speed: -- PTO: Forward 5.5 s / Return 9.5 s -- Electric: Forward 7.5 s / Return 14.5 s Your Advantages at a Glance -- Ready for immediate use—no long waiting times -- Heavy-duty design—390 kg net weight for maximum stability -- Flexible operation—tractor or 400V connection -- Convenient timber lifter for handling heavy logs -- Spare parts always available -- Professional service & support Whether delivery or collection in 48465 Schüttorf—we offer the right solution.

Condition: new, functionality: fully functional, overall weight: 650 kg, The Japa® 315+ with electric drive offers extensive features and high capacity in a compact, mobile unit. We have increased the capacity – the maximum log diameter is now 31 cm and the length is 50 cm. Technical specifications: Max. log diameter: 310 mm Nlodpfoxx Szhjx Aansk Splitting force: 5.6 t Splitting wedge: 4-way Log length: up to 50 cm Oil tank capacity: 30 l Motor power S1: 4 kW / 400V Weight: 600 kg Dimensions: 4060 x 1330 x 2580 mm Original photos & honest descriptions. Shipping by arrangement. Fair prices. ❓If you have any questions, simply contact us – we respond quickly & courteously!

Year of construction: 2025, condition: as good as new (ex-display), Universal testing machine PM10 Force: 10 kN cross beam stroke: 700 mm Installation space: 400 mm total height: 1230 mm Weight: ca.85 Kg Travel resolution: 0.01 mm testing speed: 1-500 mm / min Return speed: 700 mm / min Force transducer: 10kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: Nlodsd R Dpmjpfx Aanek - Delivery & commissioning -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Condition: used, Year of construction: 1957, Technical details: bore capacity in steel (diameter): 32 mm arm length:: 1000 horizontal adjustment of the boring slide: 700 mm vertical adjustment of arm: 600 (motorisch) mm swivel range of the arm: 90° rechts/links Grad distance table - lower edge spindle: min./max.: 200 / 1120 mm spindle taper MT: 4 bore spindle stroke: 420 (manuell-automatisch) mm range of revolutions per minute - continous: 20 - 2000 / 3 step U/min feed: 01, / 0,2 / 0,3 / 0,4 / 0,8 / 1,2 mm/U column diameter: 250 mm base plate surface area: 1100 x 600 mm total power requirement: 4,6 kW weight of the machine ca.: 2,5 t dimension machine xH: 1,8 x 0,8 x 2,5 m Njdpfovhbpqsx Aanelk Tool ejection via expulsion wedge Equipment: Coolant system with pump (without feed) Drill cube L: 760 x W: 500 x H: 510mm / horizontal surface 760 x 500mm and vertical surface 760 x 510mm Machine ilumination *

Condition: new, Year of construction: 2025, functionality: fully functional, SCHORR Log Splitter HS-22PE PRO – 22 Tons Splitting Force -- 22 t splitting force – effortless splitting of hardwood and large logs -- Heavy-duty construction (340 kg) – robust hydraulics and stable steel frame -- Combination drive: PTO and 400V electric motor – flexible use in the forest or on the farm -- Splitting length up to 110 cm – ideal for long log sections -- Practical log lifter – lifts heavy logs and functions as a safety guard -- Retractable cylinder (1.99 m) – easy to transport and space-saving storage -- 3-point hitch (Cat. I & II) – transport directly on the tractor -- Two-handed operation and safety features – maximum work safety -- Mobile thanks to wheels and transport wheel Performance and Flexibility The HS-22PE impresses with powerful hydraulics and reliable continuous operation. Thanks to PTO and 400V electric motor, you have the choice: mobile operation on the tractor or quiet, emission-free operation on the farm. Comfort and Efficiency -- Log lifter for handling heavy timber – no strenuous manual lifting -- Automatic or manual return for fast or precise working -- Two speeds – rapid approach, powerful splitting Robust Construction With high-strength steel, durable hydraulic components, and stable footing, the HS-22PE is built for tough use. The large transport wheels make moving easy, even on uneven terrain. Nedpfow Smphox Aanelk Technical Data Manufacturer (Short Name): SCHORR -- Model designation: HS-22PE -- Splitting force: 22 tons -- Own weight: 340 kg -- Drive: Electric (400V 5.5 kW, 16A) or PTO (540 rpm) Basic Dimensions -- Overall length: 1300 mm -- Overall width: 1450 mm -- Overall height: 2470 mm -- Hydraulic cylinder diameter: 11.5 cm -- Piston rod diameter: 6 cm -- Splitting wedge length: 22 cm -- Max. / Min. splitting diameter: 40 cm / 8 cm -- Distance between wedge & ground: 16 cm Speed -- Cylinder speed PTO: Advance 5.5 s / Return 9.5 s -- Cylinder speed electric motor: Advance 7.5 s / Return 14.5 s Service and Delivery -- Spare parts always in stock -- Delivery or collection in 48465 Schüttorf possible (by appointment only) -- Financing and leasing available on request We are happy to offer you personal advice on the SCHORR HS-22PE PRO.

Condition: new, Year of construction: 2025, SCHORR Log Splitter HS-30PE PRO – 30 Tons Splitting Force -- 30 t splitting force – effortless splitting of hardwood and large logs -- Heavy-duty construction (390 kg) – robust hydraulics and durable steel frame -- Dual drive: PTO and 400V electric motor – flexible use in the forest or at the yard -- Splitting length up to 110 cm – ideal for long log sections -- Practical log lifter – combines lifting heavy logs and a safety guard Nsdpfjw R Dicjx Aanslk -- Retractable cylinder (1.99 m) – easy transport and space-saving storage -- 3-point linkage (Cat. I & II) – transport directly with the tractor -- Two-handed operation and safety features – maximum workplace safety -- Mobile thanks to wheels and transport wheel Performance and Flexibility The HS-30PE impresses with powerful hydraulics and reliable continuous operation. With both PTO and 400V electric motor, you have the choice: mobile with the tractor or quiet and emission-free at the farm. Convenience and Efficiency -- Log lifter for heavy timber – eliminates strenuous manual lifting -- Automatic or manual return for fast or precise operation -- Two speeds – rapid approach, powerful splitting Robust Construction Made from high-strength steel with long-lasting hydraulic components and a stable base, the HS-30PE is built for tough use. Large transport wheels make repositioning easy, even on rough terrain. Technical Data Manufacturer (Short name): SCHORR -- Model code: HS-30PE -- Splitting force: 30 tons -- Own weight: 390 kg -- Drive: Electric (400V 5.5 kW, 16A) or PTO (540 rpm) Key Dimensions -- Overall length: 1550 mm -- Overall width: 1150 mm -- Overall height: 2500 mm -- Hydraulic cylinder diameter: 13.8 cm -- Piston rod diameter: 7 cm -- Wedge length: 26 cm -- Max. / Min. log diameter: 40 cm / 8 cm -- Distance between wedge & ground: 16 cm Speed -- Cylinder speed PTO: Forward 5.5 s / Return 9.5 s -- Cylinder speed Electric motor: Forward 7.5 s / Return 14.5 s Service and Delivery -- Spare parts always in stock -- Delivery or pick-up in 48465 Schüttorf by appointment only -- Financing and leasing available upon request We are happy to provide personal advice regarding the SCHORR HS-30PE PRO.

Condition: new, Year of construction: 2025, functionality: fully functional, SCHORR Log Splitter 22t HS-22P PRO With a splitting force of 22 tonnes, the 22t HS-22P PRO handles even the toughest wood and thick logs effortlessly. Its robust construction (290 kg net weight), low-wear hydraulic system, and high-strength steel frame ensure long service life, maximum stability, and reliable performance – even during continuous operation. PTO Drive – Direct Connection to Tractor Thanks to its PTO (power take-off) drive, the HS-22P can be directly connected to the tractor. This gives it outstanding mobility and independence from external power sources – ideal for use in the forest, on meadows, or around the farm. The splitter operates with stable power transmission and a powerful hydraulic pump, enabling fast splitting cycles. Durable Construction – Built for Heavy-Duty Use The design features high-strength steel components and a stable splitting wedge guide. Solid support feet provide a firm base, while large transport wheels allow for easy relocation – even on uneven terrain. Splitting Length up to 110 cm Long logs can be processed with ease. The heavy-duty splitting blade made from tool steel ensures a precise split line and minimal wear. Integrated Log Lifter – Enhanced Comfort & Safety The log lifter allows heavy logs to be raised effortlessly and also serves as a protective guard – greatly simplifying everyday work. Two Return Modes & Speed Levels -- Automatic return: The splitting wedge automatically returns to the preset position – ideal for rapid work cycles. -- Manual return: For precise splitting, especially when processing irregular wood. Additionally, a fast mode for approach and a slow, high-power mode for splitting are available. Practical Features for Daily Use -- Lowerable cylinder (down to 1.99 m) for easy transport and space-saving storage -- Two-hand safety operation for maximum protection -- Three-point hitch (Cat. I & II) for convenient tractor transport Technical Data -- Manufacturer: SCHORR -- Model: HS-22P -- Splitting force: 30 t -- Weight: 370 kg -- Drive: PTO (540 rpm) Dimensions: -- Length: 1300 mm -- Width: 1450 mm -- Height: 2470 mm (lowered 1990 mm) -- Hydraulic cylinder: Ø 11.5 cm -- Piston rod: Ø 6 cm -- Splitting wedge: 22 cm -- Splitting diameter: max. 35 cm / min. 8 cm -- Wedge-to-ground gap: 20 cm Nlsdpfx Aasw Smm Tonjk Speed: -- PTO: Forward 8.0 s / Return 9.0 s Your Advantages at a Glance -- Ready to use immediately – no long waiting times -- Solid construction – 290 kg net weight for maximum stability -- Flexible operation with tractor -- Convenient log lifter for heavy timber -- Spare parts always available -- Expert service & advice Whether delivery or collection in 48465 Schüttorf – we provide the right solution.

Condition: new, Year of construction: 2025, functionality: fully functional, SCHORR Log Splitter 30t HS-30P PRO With a splitting force of 30 tons, the SCHORR HS-30P effortlessly tackles even the hardest woods and thick logs. The robust construction (370 kg own weight), a low-wear hydraulic system, and a high-strength steel frame ensure long service life, maximum stability, and reliable operation—even in continuous-duty applications. PTO Drive – Directly via Tractor Thanks to its PTO drive, the HS-30P can be directly connected to a tractor. This makes it highly mobile and independent of power sources—ideal for use in forests, meadows, or farmyards. The splitter operates with stable power transmission and a high-performance hydraulic pump that ensures fast splitting cycles. Durable Construction – Engineered for Tough Conditions The design relies on high-strength steel components and a stable wedge guide. Sturdy support feet provide secure footing, while large transport wheels make relocation easy—even on uneven ground. Splitting Length up to 110 cm Long log sections can be processed without issues. The robust splitting blade made of tool steel guarantees a precise split line and minimal wear. Integrated Log Lifter – Enhanced Comfort & Safety The log lifter allows for effortless lifting of heavy logs and simultaneously acts as a protective guard—offering significant relief in daily operations. Two Return Modes & Speed Settings -- Automatic Return: The wedge returns autonomously to the preset position—ideal for fast working cycles. -- Manual Return: For precise splitting tasks, especially with irregular logs. Additionally, a rapid advance speed and a slow, extremely powerful splitting stage are available. Practical Details for Everyday Use -- Retractable cylinder (down to 1.99 m) for easy transport and space-saving storage -- Two-hand safety operation for maximum protection Nlodpfxew Smlpe Aansk -- 3-point hitch (Cat. I & II) for convenient transport with the tractor Technical Data -- Manufacturer: SCHORR -- Model: HS-30P -- Splitting force: 30 t -- Weight: 370 kg -- Drive: PTO (540 rpm) Dimensions: -- Length: 1540 mm -- Width: 1400 mm -- Height: 2500 mm (retracted 1990 mm) -- Hydraulic cylinder: Ø 13.8 cm -- Piston rod: Ø 7 cm -- Splitting wedge: 26 cm -- Splitting diameter: max. 40 cm / min. 8 cm -- Distance wedge-ground: 16 cm Speed: -- PTO: Advance 5.5 s / Return 9.5 s Your Advantages at a Glance -- Ready for immediate use—no long wait times -- Robust design—390 kg own weight for maximum stability -- Convenient log lifter for heavy wood -- Spare parts always available -- Expert service & advice Whether delivery or collection in 48465 Schüttorf—we offer the right solution.