Used Weiler Lathe for sale (199)

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, featuring a 3-axis digital display from Elesta, from a training workshop!! Technical data: Fjdoy Tmkvjpfx Ap Dsgh >> Machine no. 88-8115, year of manufacture 1988 >> Center height 140 mm >> Center distance 500 mm >> Speed: 15 – 3550 RPM >> Spindle bore 36 mm >> Short taper spindle head DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> 3-axis digital display Elesta >> Quick-change tool post, internal and external collets (see picture) >> 1 three-jaw chuck, 1 set of jaws >> Mulifix size A with 3 steel holders >> Spindle guard >> 1 bed stop >> Change gears >> Follow rest >> Machine feet About the machine: A Weiler Matador VS-2 in very good condition is offered for sale. The machine is fully functional. The slides all move smoothly and evenly. Even at high speeds, the Weiler runs smoothly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, spindle bore: 56 mm, spindle speed (max.): 4,000 rpm, overall weight: 1,450 kg, For sale is a high-precision, cycle-controlled lathe, a WEILER CONDOR VC plus, manufactured in 2013. The machine is in fully functional and extremely well-maintained condition and comes with a very extensive set of accessories (pictures of the machine in use are included). Technical data & equipment: Manufacturer / Model: WEILER CONDOR VC plus Year of manufacture: 2013 Center height: 180 mm Distance between centers: 800 mm Swing over bed: 360 mm Spindle bore: Ø 56 mm Spindle speed: continuously variable up to 4,000 rpm Operating voltage: 400 V Connected load: 12.5 kVA Machine weight: approx. 1,450 kg Digital display / control: WEILER VC plus screen electronics Accessories & scope of delivery (as shown in the pictures): - 1x steady rest (fixed rest) - Extensive Multifix quick-change tool holder set - Large selection of chuck jaws (hard & soft) - Three-jaw chuck mounted - Splash guard / protective cover Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES, ETC. Fjdpfoz Dwtwsx Ap Dsgh Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: like new (used), functionality: fully functional, Weiler Primus Lead and Pull Spindle Bench Lathe – Like New Condition!!! Technical Data: >> Year of manufacture approx. 1990, machine no. 4472 >> Center height 120 mm >> Distance between centers 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle bore 23 mm >> Short taper spindle head DIN 55027 >> Tailstock MK 2 Fodpfx Apsz A Tgqj Dogh >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: Metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 three-jaw chuck, 125 mm, like new, with 2 sets of jaws >> Collet chuck with collets from 2 mm to 12 mm, increasing in 1 mm increments >> Mulifix size A with 3 steel holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle guard >> Operating manual, electrical diagrams, and much more About the machine: A Weiler Primus Lead and Pull Spindle Bench Lathe with a workbench is offered in like-new condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This Primus model comes from the German Armed Forces, where it was used very little (almost new). This newer generation of Weiler lathes is very user-friendly and can produce surfaces that are as smooth as if they were ground. Take advantage of the opportunity to inspect this machine on-site and under power to convince yourself of its condition. Digital display available for an extra charge.

Condition: excellent (used), functionality: fully functional, Weiler center lathe, model Condor 81, with a leading and following center, and a 3-axis digital display from K&C, NEW. Technical specifications: >> Year of manufacture 1982, machine number 82 017 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5, with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approximately 1100 kg >> Spindle brake can be engaged >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: Switching between mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching the counting direction >> 1 three-jaw chuck, 160 mm, 1 set of jaws >> Mulifix size B with 1 steel holder >> Change gears >> Electronic spindle protection >> Back wall >> Coolant system >> Machine feet At an extra cost: New collet chuck and new collets from 3 to 26 mm, in 1 mm increments. About the machine: Fedpez D Hx Njfx Ap Dsgh A used Weiler Condor 81 in very good condition is offered. It comes from a training center and has been well maintained. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital display from K&C makes working even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on site while it is powered up.

Year of construction: 1986, condition: used, Weiler Primus lathe year ca.1986, three-jaw chuck , Multifix. Machine in a good condition , By arrangement under power ready for demonstration. Fjdpfsn Ard Djx Ap Dsgh

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C NEW in Special Light Grey Finish!!! Technical Data: >> Machine No. 92-028 Year of manufacture: 1992 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feeds: 0.012 to 0.9 mm/rev >> Possible threads: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer warranty with operating manual Functions: Switchable mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, change of counting direction, >> 1 piece 3-jaw chuck, 1 set of jaws >> 1 piece 4-jaw chuck, 1 set of jaws >> Electronic spindle guard >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop Fedeyyb T Sepfx Ap Degh About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been repainted in light grey. A very nice machine. The 3-axis digital readout from K&C has been retrofitted. All measuring scales are new and equipped with cover plates to protect them from dirt. The slides move freely and smoothly. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C - NEW - Special Light Grey Paint Finish!!! Technical Data: >> Machine no. 92-029 - Year of manufacture: 1992 >> Center height: 140 mm >> Center distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Fgsdeyylqhspfx Ap Djh Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty, with operating manual Functions: Switching between mm/inch, ABS/INC coordinate selection, value halving, reference point, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 2 sets of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All scales are new and equipped with protective covers to shield them from dirt. The carriage runs smoothly and evenly. Take the opportunity to view this machine under power on site and see its condition for yourself.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C—NEW in Special Light Grey Paintwork!!! Technical Data: >> Machine No. 92-027, Year of manufacture: 1992 >> Centre height: 140 mm >> Distance between centres: 500 mm >> Spindle speeds: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with bayonet lock >> Tailstock taper: MT 3 >> Feed rates: 0.012 to 0.9 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 12 mm Fjdpfx Apsyylq Uo Degh >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer’s warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece 3-jaw chuck with 1 set of jaws >> 1 piece 4-jaw chuck with 1 set of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been freshly repainted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All measuring scales are new and fitted with protective covers to prevent contamination. The carriage movement is smooth and even throughout. Take the opportunity to view this machine under power on site and convince yourself of its condition.

Condition: good (used), Year of construction: 2007, cycle controlled lathe Machine type: Weiler E 120 x 3.000 Control: Weiler D3 Year: 2007 Power on time: ca. 41.000 h SPECIFICATIONS Max. turning length: 3.000 mm Turningdiameter: 830 mm Max. swing over bed: 1.200 mm Bettbreite 600 mm Spindle bore: 165 mm Spindelkopf DIN55027 Gr 15 Collets: Forkardt 3KS 800mm Spindle speeds: 1 - 280 / 4 - 900 rpm Transmission ratio: 2 Torque: 8.000 Nm Amount of turrets: 1 Sauter 4-Fach Kopfrevolver für 140mm Aufnahmen Fgsdpfx Apjzizd To Djh Tailstock Quill diameter: 140 mm quill range: 400 mm Equipment Electronical handwheel Hydraulisches Kraftspannfutter Forkardt 3KS 800mm Chip conveyor

Condition: reconditioned (used), Year of construction: 2001, Universal lathe with guide and lead screw Manufacturer: WEILER Model: Praktikant 160 B Year of manufacture: 2001 – partially overhauled Newly painted RAL 7035 light grey Machine No.: 4790 Center height: 160 mm Distance between centers: 650 mm Warranty: 6 months on the mechanics, which have been partially overhauled by us. The warranty does not cover the electrical and electronic components, as they have only undergone a functional test. Fsdpfx Apszy Ngqj Degh For machines located outside our North Bavarian sales area, the travel costs must be borne by the customer. Geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i T, new - Lever-type collet quick-change chuck for collet type K32 (386E) - Covered guide and lead screw - Braked drive motor - Coolant system - Electrically secured chuck guard, new - Quick-change tool holder size A - Simple bed stop - Chip guard - Operating manual Used, as is The machine is technically in the condition corresponding to its original year of manufacture.

Condition: used, functionality: fully functional, Mechanic's lathe, manufactured by WEILER Spindle speeds, continuously variable Level 1: from 160 - 900 rpm Level 2: from 320 - 1800 rpm Fgsdjz D Ut Iopfx Ap Deh Technical data: Center distance approx. 500 mm Center height above bed approx. 125 mm

Condition: ready for operation (used), L & Z Lathe WEILER CONDOR VS incl. RSF Digital Display -Center height 165mm -Swinging diameter over bed 330mm -Distance between centers 800mm -Speed range 28 - 2800 RPM -Automatic longitudinal / cross feeds -Spindle bore approx. 38mm -Tailstock -RSF Digital Display -Multifix base with inserts -3-jaw chuck & quick-change jaws -Collets / quick-change chuck incl. collets -Drill chuck / rotating center -Bed stop -Chip guard -Coolant system Fgodpfszn Rahjx Ap Doh -Emergency stop / On/Off switch -Documentation Dimensions: L x W x H 2 x 0.8 x 1.6 meters / Weight 900 kg Errors and omissions excepted.

Condition: used, Year of construction: 2003, Technical details: turning diameter over bed: 720 mm turning dia. over face-slide: 430 mm turning length: 2000 mm bed width: 480 mm centre distance: 2000 mm centre height: 360 mm face slide travel: 410 mm control: Siemens Sinumerik 810D Weiler D2 Steuerung revolution per minute: 1 - 1800 U/min spindle diameter: 280 mm spindle bore: 216 mm spindle head: DIN 55026 - Größe 15 max. torque on the spindle: 4300 Nm tailstock taper ISO: MK 6 tailstock quill stroke: 225 mm tailstock quill diameter: 115 mm total power requirement: 30 kW Weight approx.: 6,2 t dimension machine approx.LxWxH: 4,3 x 2,5 x 1,95 m WEILER E70 x 2000 Oil Country Lathe – Rare Special Version with 216 mm Spindle Bore We are pleased to offer this exceptionally rare WEILER E70 x 2000 Oil Country Lathe, manufactured in 2003, in very well-maintained condition. This machine is not a standard WEILER E70, but a factory-built special Oil Country version, specifically designed for machining long pipes, bar stock and large-diameter workpieces. Featuring an extra-large 216 mm spindle bore, this machine is one of the rare WEILER Oil Country Lathes and was specially developed for demanding applications in the oil & gas, pipeline, energy and heavy engineering industries. Wide Range of Applications Thanks to its rigid construction, large spindle bore and heavy-duty design, this machine is ideally suited for: Oil & Gas Industry Drill Pipe Machining Casing and Tubing Pipes Pipeline Construction Energy Industry Steel and Pipe Mills Mechanical Engineering Heavy Equipment Manufacturing Fsdpfx Aszdn S Hop Dogh Repair and Maintenance Workshops Machine Repair Companies Tool and Die Shops General Engineering Workshops Job Shops and Contract Manufacturing Single-Part and Small Batch Production Hydraulic Cylinder Manufacturers Companies machining large bars, shafts and tubular materials *

Condition: like new (used), Year of construction: 1992, Lathe WEILER Precision center lathe in ergonomic design The Weiler Ergodor is the first German ergonomically designed lathe. It creates a more humane workplace and prevents health problems. The key feature is that the employee can operate this lathe while standing or sitting. Technical data Center width 470 mm Turning length 430 mm Center height 145 mm Rotation Ø over cross slide 160 mm Rotation Ø over bed 300 mm Spindle head, short taper flange Bayonet mounting DIN 55022 size 5 or Camlock clamping D 1-ASA-4 Spindle bore 36 mm DIN 55022 size 5 Spindle inner taper Spindle speeds Speeds 30 - 3550 rpm S Fjdpsvgqu Hsfx Ap Dsgh Speeds 15 - 3550 rpm Brake motor 3 kW Brake motor 1.5/3 kW Face slide travel 150 mm Travel of the top slide 100 mm Feed rates and thread pitches on the gearbox switchable steps 30 Section 2 1.5/3 kW 38 Gear ratio in headstock 3 20 Long feeds 150 mm via change gears 100 mm via toothed belt Face feeds = 1/2 Longitudinal feed values Metric pitches 0.2 - 12 mm Module pitches 0.1 - 4 Dimensions 1450 x 640 x 1500 mm Dimensions 1450 x 640 x 1500 mm Net weight 1000 kg Acceptance according to toolmaker's accuracy DIN 8605 20 Built according to the rules of occupational safety, official test no. A. EM 11 1545/80. Encombrement 1450 x 640 x 1500 mm

Condition: excellent (used), functionality: fully functional, Weiler Praktikant R 500 lathe Fodjzbhnqepfx Ap Dogh In very good condition, turning test: 100mm, runout 0.005 parallel. Guideways and smooth running in all speeds are flawless. Turning diameter: 280 x 500 Spindle speeds: 42 - 2000 Spindle bore: 36 3-jaw chuck Röhm 160, live center, quick-change drill chuck, lighting, coolant system. Multifix A with 4 holders, additional accessories available upon request. Dimensions: L 1.42m, W 0.6m, H 1.24m, weight approx. 600 kg Can be inspected while powered on. Free loading at D - 88433 Schemmerhofen.

Condition: excellent (used), For sale is a Weiler C30 x 750 DJ02 lathe from 2008 in very good, well-maintained condition. The machine comes from a training environment and has been used accordingly with care. It is in very good technical and optical condition and has its original paint. Technical data / Equipment: * Manufacturer: WEILER * Model: C30 x 750 DJ02 * Year of construction: 2008 * Type: Conventional lathe * Application: Training / Workshop * Very good, well-maintained condition * Original paint Accessories / Scope of delivery: * New collet quick-change system * 3-jaw chuck * Multifix B quick-change tool holder * Technical documentation Due to its very good condition, the machine is ideal for training companies, workshops, locksmiths, mechanical production, and general workshop use. Inspection possible by arrangement. WORK AREA Center height 165 mm Swinging diameter over bed 330 mm Swinging diameter over cross slide 160 mm Distance between centers 750 mm Fjdpfsz Aitpjx Ap Djgh SPINDLE Spindle head DIN 55027/DIN ISO 702-3 Size 5 Spindle bore 43 mm Spindle diameter in the front bearing 70 mm MAIN DRIVE Drive power 60 %/100 % ED 9/7 kW Speed range 1 – 4,500 min-1 Number of speeds stepless FEED RANGE Number stepless Longitudinal 0.001 – 10 mm/rev Cross 0.001 – 10 mm/rev Feed force longitudinal 6,000 N Feed force cross 3,000 N Max. rapid traverse speed longitudinal/cross 6/3 m/min THREADING RANGE Metric threads 0.1 – 400 mm Inch threads 56 – 1/4 Gg./inch TAILSTOCK Arbor diameter 50 mm Arbor stroke 110 mm Internal taper DIN 228 MK 3

Condition: good (used), functionality: fully functional, Subject to differential taxation according to §25a of the German VAT Act. You will receive a regular invoice. Internal article number: 26057 Lathe Weiler Matador + Multifix "A" baseplate + 3-jaw chuck + Collets + Coolant pump Center height approx. 150mm Turning diameter over carriage 160mm Turning diameter over bed approx. 300mm Distance between centers approx. 500mm Spindle bore approx. 36mm Speed range 30 - 3500 rpm Automatic longitudinal/cross feeds Fedpfezx R R Iox Ap Dsgh Tailstock MK3 Dimensions (L x W x H): 150 x 70 x 150cm Weight: 600kg The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our heated storage area of over 500 m².

Condition: used, Year of construction: 2011, centre height 280 mm Fgodpfx Apoz I T Raj Dsh centre distance 00 mm turning diameter over bed 570 mm turning diameter over slide rest 340 mm turning length 2100 mm spindle head A8 DIN55027 spindle diameter 1 mm spindle bore 83 mm torque 1600 Nm turning speed range 1-2500 (2 Stufen) U/min worktool system PARAT face stroke 340 mm rapid power traverse in X-and Z direction 5 / 10 m/min feed Z / X m / U feeding dorce 10000 / 7000 N tailstock quill diameter 80 mm tailstock quill stroke 160 mm tailstock quill taper ISO MK 5 total power requirement 15 kW Weight 3550 Kg dimensions of the machine ca. 3,85 x 2,30 x 1,80 m

Condition: excellent (used), Year of construction: 1997, CNC Lathe Weiler E 50/1, 1997 Fsdpfx Aoymdw Sep Djgh Technical specifications: Manufacturer: WEILER Model: E 50/1 Year of manufacture: 1997 Centre height: 280 mm Centre distance: 1000 mm Max. turning diameter: 500 mm Swing diameter over bed: 570 mm Swing diameter over cross slide: 340 mm Spindle speeds: 0 - 2500 rpm Chuck

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Weiler Praktikant 140 B Lead and Feed Screw Lathe with Toolroom Accuracy featuring NEW K&C 3-Axis Digital Readout! Technical Data: - Year of construction: 1989 Machine No.: 89-140-1471 - Centre height: 140 mm - Centre distance: 650 mm - Spindle speeds: from 24 to 2500 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock MK 3 - Feeds: from 0.02 to 0.63 mm/rev - Thread cutting: Metric, Imperial (inch), Module and Diametral Pitch threads possible - Metric thread pitches: from 0.25 to 8 mm - Weight: approx. 680 kg - Spindle brake, selectable - Dimensions: Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories and Equipment: - NEW K&C 3-axis digital readout, 12 months manufacturer warranty and operating manual Functions: switch mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool library for 200 tools, taper calculation, radius/diameter indication, quick zeroing, count direction switching - NEW collet system with collets from 3 to 25 mm, 1 mm increments - Three-jaw chuck, 160 mm, with 1 set of jaws - Multifix size A with 2 tool holders - Face plate - Bed stop - Rear cover - Machine feet - Electronic spindle guard - Operating manual Safety features: Electronic spindle protection, lead and feed screw cover, 2 emergency stops, spindle brake, electronic change gear guard About the machine: Fjdpfx Aoymdymep Degh For sale is a Weiler Praktikant 140 B lead and feed screw lathe in very good condition. This well-maintained lathe comes from a training workshop. All slides operate smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows the production of ground-like surface finishes. Take the opportunity to view and test this machine under power on site to verify its condition for yourself.

Condition: good (used), Year of construction: 1994, cycle controlled lathe Machine type: Weiler E 35 Control: Siemens 805 Fsdpfxjziy A Ie Ap Dsgh Year: 1994 Available after: sofort / now SPECIFICATIONS Center height: 200 mm Max. turning length: 950 mm Turningdiameter: 410 mm Max. swing over slide: 200 mm Spindle bore: 54 mm Spindle speeds: 20 - 3.000 rpm Tailstock: MK 4 Travel X-Axis: 230 mm Power consumption: 10 KW Machine weight: 2100 kg Equipment 46 Spannzangen 173 E nach DIN 6343 / 46 collets 173 E DIN 6343

Condition: ready for operation (used), L & Z Lathe / WEILER CONDOR VS 2 with new 3-axis digital readout from training workshop - 3-axis digital readout "NEW" - Center height: 165 mm Fgsdpfx Apoy Ral Ij Deh - Swing diameter over bed: 330 mm - Center distance: 800 mm - Speed range: 28 - 2800 rpm - Automatic longitudinal / cross feeds - Spindle bore - Tailstock with center - Collets / quick-clamping device incl. 25 collets - 3-jaw chuck Röhm 200 mm with reversible jaws - Multifix / new with insert - Work light - Emergency stop - Bed stop - Machine feet - Documentation Dimensions: LxWxH 2x0.8x1.6 meters / Weight 900 kg Subject to errors and input mistakes.

Condition: used, Year of construction: 1998, operating hours: 38,856 h, functionality: fully functional, machine/vehicle number: 643, turning diameter over cross slide: 340 mm, turning length: 2,000 mm, turning diameter: 570 mm, spindle bore: 66 mm, rotational speed (min.): 1 rpm, rotational speed (max.): 2,500 rpm, total height: 1,750 mm, total length: 3,850 mm, total width: 1,815 mm, quill diameter: 80 mm, quill stroke: 200 mm, swing diameter over cross slide: 340 mm, turning diameter over bed slide: 570 mm, overall weight: 3,550 kg, center width: 2,000 mm, center height: 280 mm, bed width: 350 mm, For sale is a used/well-maintained WEILER lathe, model E 50. 2022 (Repairs/renovations performed by WEILER service technicians): - Bed slide disassembled, cleaned, and recoated - Hand grips re-covered and adjusted Fgedpfx Apozcv Ege Doh - Spindle bearings and timing belt of the X-axis replaced - Bearing unit of the Z-axis replaced - Scraper replaced - Reference points adjusted - Test run performed

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 4,000 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 500 mm, spindle motor power: 4,000 W, total height: 1,700 mm, total width: 890 mm, overall weight: 1,050 kg, bar diameter (max.): 43 mm, product length (max.): 1,570 mm, workpiece diameter (max.): 280 mm, number of slots in tool magazine: 4, number of axes: 2, Horizontal turning machine manufactured in 2018. This Weiler PRIMUS VCD features a connected load of 7.5 kVA and operates at a nominal current of 15.5 A. With a machine weight of 1050 kg, it is designed for robust performance. If you are looking to get high-quality turning capabilities, consider the Weiler PRIMUS VCD machine we have for sale. Contact us for further details. • Machine Type: Centre Lathe • Turning Length / Distance Between Centres: 500 mm • Swing Over Bed: 280 mm • Swing Over Cross Slide: 150 mm • Spindle Nose (DIN 55027): Size 5 • Front Bearing Diameter: 70 mm • Spindle Bore: 43 mm • Main Spindle Internal Taper: ME 50 • Drive Power (100% Duty Cycle): 4 kW • Spindle Speed Range: 30 – 4,000 rpm • Number of Feed Rates: 24 • Longitudinal Feed Range: 0.02 – 0.63 mm/rev • Cross Feed Range: 0.006 – 0.20 mm/rev • Metric Thread Range: 0.25 – 8 mm • Inch Thread Range: 80 – 2 TPI • Module Thread Range: 0.25 – 4 Module • Diametral Pitch (DP) Thread Range: 200 – 5 DP Fgedpfszpwh Uox Ap Doh • Tailstock Quill Diameter: 40 mm • Tailstock Quill Travel: 85 mm • Tailstock Taper: MT3 • Operating Voltage: 400 V • Control Voltage: DC 24 V • Connected Load: 7.5 kVA • Nominal Current: 15.5 A • Frequency: 50 Hz • Main Fuses: 25 A • Machine Weight: 1,050 kg • Machine Dimensions (L × W × H): 1,570 × 890 × 1,700 mm Additional Equipment • 4-Position Quick-Change Tool Post PARAT Size 1, incl. 1 × WD 1/12 Tool Holder • 2 × WD 1/12 Tool Holders • Lever-Operated Collet Chuck for 173 E Collets • 13 × 173 E Collets, Clamping Range: 3–15 mm (1 mm Increments) • Fixed Steady Rest with Roller Jaws, Capacity: 15–100 mm • Movable Chip Splash Guard with Viewing Window • 8 × Levelling Elements Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), functionality: fully functional, Weiler Primus lathe in excellent condition. Can be inspected while powered on. Technical data: Center distance: 450 mm Center height: 120 mm Spindle bore: 23 mm Speed: 30 – 3000 rpm Fgjdpfx Aex Htf Hsp Djh Tailstock: MK 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1550 mm Price reduced!