Used Weinig Contipress for sale (532)

Condition: used, Weinig Unimat 300 four-sided planer Gisdpfx Aezgfxcsfqow Working width: 230 mm Working height: 130 mm Number of spindles: 4 Spindle arrangement: 1. Bottom 2. Left 3. Right 4. Top 5. Bottom Two feed speeds: 6-12 m/min Pneumatic pressure pads Illustrative photo; availability starting in July.

Condition: like new (used), Year of construction: 2023, Weinig Powermat 700 6 spindle four-sided planer machine * Machine as new, 0 operating hours * 6x Weinig Powerlock with 8000 RPM Bottom - right - left - top - top - bottom Feed speed 5-40 m/min Infeed table 2 meters Axial and radial CNC adjustments for spindles 2, 3, and 5, 6 Giodpfx Ajzk Hdusfqjw Radial CNC adjustment for spindle 4 Table surfaces with Marathon coating Automatic Waxilit pump Operating concept Comfort Set Powercom Plus

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, working width: 260 mm, spindle diameter: 40 mm, planing width: 260 mm, working height: 160 mm, spindle speed (min.): 7,000 rpm, Weinig Powermat 700 6 spindles 260 mm wide 160 mm high 40 mm spindles 7.000 rpm Feed speed 5-40 m/min Bottom 11.0 KW Right + left motor joint motor 11.0 KW Top 11.0 KW Top 7.5 KW Godezk Hdnopfx Afqoiw Bottom 7.5 KW Radial CNC controlled adjustment and positioning left + top spindles Marathon coating for machine tables and fences (excl. infeed table) 2.5 Meter infeed table Memory Plus operating system

Condition: used, Year of construction: 2014, functionality: fully functional, cutting height (max.): 100 mm, cutting width (max.): 1,200 mm, Equipment: CE marking, documentation/manual, • Log deck • Log table with infeed system • Brenta slab chipper Gsdpfx Ajzktrxefqsiw • Gillet bandsaw • Finished material deck • WEINIG timber edging line with lumber sorting line • Segem wood chipper with infeed and outfeed lines • Screw compressor

Condition: used, Year of construction: 1999, Hello, I am selling a cutting and planing line. The line includes: Giedpfjzkkrisx Afqew - Infeed table for a multi-blade saw - Multi-blade saw MAKA V350, 22KW motor, year 1996, cutting width 350 mm, feed length 800 mm - Outfeed table - Cross conveyor - Longitudinal conveyor to the planer - Additional feed mechanisms on the planer table - Weinig Unimat 23 EL planer, year 1999, 59 KW motor, grooved table, 5 cutterblocks, electrically adjustable cutting width and height - Outfeed conveyors from the planer - Cross outfeed conveyor - Pallet truck with mast The line operates automatically. I can send videos of the line in operation via WhatsApp. I will provide more information by phone. Price: 320 thousand PLN net VAT invoice available.

Condition: excellent (used), functionality: fully functional, Weinig Powermat 1000 four-sided planer Gisdozf Nh Sepfx Afqew Working width: 230 mm Working height: 160 mm Number of spindles: 6 Spindle arrangement: Bottom Right Left Right Top Bottom Top Bottom Feed rate adjustable via a frequency inverter up to 30 m/min Electromotive positioning of working height and width Pneumatic material clamping Drive on cardan shafts

Condition: used, Year of construction: 2016, machine/vehicle number: IDC000246, saw blade diameter: 700 mm, cutting height (max.): 225 mm, power: 13.5 kW (18.35 HP), Wood Optimizing Cross-Cut Saw Manufacturer: WEINIG / WEINIG DIMTER OptiCut S60 Gisdpfxozkim Se Afqjw Year of Manufacture: 2016 (fully serviced in 2026) Professional optimizing cross-cut saw for precise and efficient wood processing. Applications: Pallet manufacturing Wooden packaging production Furniture manufacturing Sawmills and carpentry workshops Technical Specifications: Max. cutting height: 225 mm Saw blade diameter: 700 mm Saw motor: 13.5 kW Positioning drive: 5.1 kW Material length: 400–6300 mm Material width: 40–300 mm Material thickness: 15–225 mm Finished length: 80–4800 mm Features: Automatic measuring and positioning Automatic feeding with 9-row cross conveyor Laser length detection Pneumatic workpiece clamping Touchscreen control Positioning accuracy up to ±1 mm Workpiece weight up to 250 kg High productivity and reliable WEINIG quality

Condition: used, Parquet mosaic production line length 160 mm: 1. Schroeder mosaic press MTA-2 PE 1992 r 7,3 KW 2. Schroeder feeder PST 1992 r 3. Schroeder feeder SB35 B 1992 r 4. schroeder feeder BA-2 1992 r 5. schroeder feeder BA-2 1992 r 6. Schroeder feeder SB35 B 1992 r 7. WENIG GMBH P 120 double edging machine 8. WENIG GMBH P121 Thicknessing machine with cutters ( not Hollowing heads) 9. WENIG GMBH P122 multi-saw 10. WENIG GMBH 135 sorter - sorting system for 3 classes with interchangeable magazines (containers). Magazines 200pcs. Godpfx Aotp I Hcjfqsiw

Condition: excellent (used), Year of construction: 2000, I sell the window production machine Weinig Unicontrol 6. Gsdpezkmd Iefx Afqsiw Year 2000. Moulding heads OERTLI. Available immediately. Condition very good !

Condition: used, Year of construction: 2011, Working width: 20–230 mm Working height: 8–120 mm Feed system • Variable-frequency controlled feed drive: 5–30 m/min, continuously adjustable, with 7 kW (9.5 HP) brake motor. • Pneumatically controlled up/down infeed roller before the 1st bottom spindle. • Axial adjustment range of the feed rollers relative to the left spindle: 35 mm. • Extended pendulum axis opposite the left spindles to 150 mm. • Reduced roller spacing in the area of the right-hand spindles. Machine frame, tables and fences • 2 m long jointing table (including jointing fence). • Grooved guide for short or difficult-to-feed workpieces, coated with Marathon PowerCoating. Table tops are non-removable. o Minimum working width: 25 mm o Maximum stock removal at the 1st bottom spindle: 7 mm • Manual lubrication pump. • One driven, hardened outfeed table roller, 210 mm wide. • One driven, hardened machine table roller, 210 mm wide. Pressure elements and guides • Spring-loaded top pressure rollers. • Anti-kickback device before the top spindle for short workpieces. Machine operation • Memory function for storing profile setup data. • EasyCom for quick and easy setup of the moulder and planer. • Storage for up to 1,000 profile programs, including tool data. • Reduced setup times. • Convenient and safe operation. • Basic equipment prepared for CNC-controlled adjustment and positioning. • 2 CNC-controlled radial adjustment and positioning axes for tool spindles No. 4 and No. 5, in conjunction with the Memory function or EasyCom. • CNC-controlled feed height adjustment (up/down) in conjunction with the Memory function. • Mobil- tool spindle (1 axis): automatic adjustment of the left spindle to different workpiece widths. • Centralized lubrication points located at the front of the machine. • Electromagnetic locking of the safety hood. • One internal light inside the safety hood. Specifications are provided for information only. Gjdozkklpopfx Afqoiw This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: excellent (used), High speed moulder infeed comprising a freestanding flat magazine in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 5.5kW hydraulic unit (max 140m/min). A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814. Giodpfx Afewgbxzjqew

Condition: like new (used), WEINIG SPARE PARTS FOR HYDROMAT POWERMAT UNIMAT USED AND NEW PARTS SPINDLES GEARBOXES CASTINGS MOTORS VARIATORS BED PLATES OUTBOARD BEARINGS JOINTERS PCS LOGOCOM ETC BRIVE BELTS POSITION INDICATORS PRESSURE SHOES CHIP BREAKERS HOODS PENDULUMS SHORT BOARD FEEDING PARTS TOOLING Giodpfx Afezc H Ireqow ETC

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, PRIBO PATERNOSTER STACKER Gjdpfx Afsy Hb Upeqeiw OFFER INCLUDES 1. PROBO OUTFEED CONVEYOR WITH RIGHT ANGLE TRANSFER CONVEYOR. 2. PRIBO Q1020 PATERNOSTER STACKER. 4. 2X AUTOMATIC STICK MAGAZINES 1200MM. MINIMUM LENGTH APPROXIMATELY 1900MM. MAXIMUM LENGTH 4500MM. PACK WIDTH 1200MM PACK HEIGHT 1200MM MAX. CAPACITY 5 LAYERS PER MINUTE SUITABLE FOR STACKING AFTER MOULDER, TRIMMERS, RESAW, DET, ETC.

Condition: excellent (used), Year of construction: 2015, WEINIG HYDROMAT 2000 FEED MOTOR 5.5 KW FEEDRATE MAX 36 M/MIN SPECIAL WIDE FEEDING SYSTEM WITH AIR BED 1ST SPINDLE BOTTOM 11 KW, COUNTER BEARING 2ND SPINDLE RIGHT 7.5 KW 3RD SPINDLE LEFT 7.5 KW 4TH SPINDLE BOTTOM 7.5 KW, COUNTER BEARING 5TH SPINDLE TOP 15 KW, COUNTER BEARING WORKING WIDTH 250 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 5 BOTTOM SPINDLES 2 RIGHT SPINDLES 1 SPINDLES LEFT 1 SPINDLES TOP 1 SPINDLE CONFIGURATION B-R-L-B-T SPINDLE ROTATION SPEED MAX 1/MIN 7.200 RPM SPINDLE DIAMETER 40 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 5,5 KW Giodpfx Aszb Ifvjfqsw MAIN MOTOR POWER 15 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT PIECE PACKAGE REDUCED ROLLER GAP PNEUMATIC TOP PRESSURE FIRST INFEED ROLLER CONTROLLED TYPE OF FEED ROLLER DRIVE CARDANIC MANUAL CENTRAL LUBRICATION CONTROL WEINIG POWERCOM PLUS CONFORMITY MARKING CE MARK TOTAL CONNECTION 55 KW

Condition: good (used), Feed speed 10-80 m/min Saw wheel diameter 1050 mm Bandsaw width 130mm Saw motor power 2 x 30 kW Hydraulic feed with centering. 7.5kW hydraulic pump Saw blade lubrication tank 2 x 6l Gedpfx Afjy Sgyheqoiw Voltage 400 volts 50 Hz Weight approx. 10,000 kg

Condition: good (used), WEINIG HYDROMAT H-23 10 SPINDLE MACHINE WITH TILT BEAM SHORT INFEED TABLE 1: BOTTOM 7,5KW 2: RIGHT 11 KW 3: LEFT 11 KW 4: RIGHT 11 KW 30° TILTABLE 5: LEFT 11 KW 6: TOP 11 KW 7: BOTTOM 11 KW 8: TOP 11 KW 9: BOTTOM 11 KW 10: UNIVERSAL 11 KW 360° TILTABLE 80 M/MIN+ ELECTRIC. FEED 14 x DRIVEN TOP FEED ROLLERS 7 x DRIVEN BED FEED ROLLERS AUTOM. BED LUBRICATION PNEUM. POWERED SIDE PRESSURE ROLLERS PNEUM. POWERED HOLD DOWN ON 7+9 DIMENSION: APPR 5400 X 2000 X 1800 MM WEIGHT: APPR. 7500 KGS Gisdpeycvfmjfx Afqow DUSTHOODS: 10 x 140 MM DIAMETER SOUND ENCLOSURE ROOM INCLUDED

Condition: good (used), Year of construction: 2000, Weinig A5 outfeed with automatic board stacker. -Boards are automatically transported laterally with the Weinig 820 right angle transfer. Giedpfx Afjxftvaeqjw -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high)

Condition: excellent (used), Year of construction: 2004, Weinig Rondamat 960 Powerlock (Automatic straight knife grinder and profile grinder) Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Specification as follows Weinig Rondamat 960 Powerlock / HSK profile grinder. High pecision knife grinder for sharpening straight knives and profiling using a template. Sharpening straight knives in the cutter block. Manual grinding machine for profile and straight grinding. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: Ceramic 5 mm, Borazone 10 mm Grinding wheel bore: 60 mm Tooling circle min./max.: 100 mm / 300 mm Tool width max.: 240 mm Grinding wheel drive: 1,1 kW Spindle rpm: 1700 / 2000 / 2400 / 3000 U/min Free angle: Radial: (at the back) 10 - 30 degrees, Axial: 0 - 20 degrees For swivel heads up to 60 degrees Coolant tank approx. 50 litres Table feed 0 - 240 mm Electrical connection approx. 2 kW Pneumatic connection value 5 bar Operating voltage 380 V / 50 Hz Full documentation. POWER LOCK SYSTEM option For grinding powerlock tools. Tool holder with manual HSK quick clamping system. Radial table clamping with fine adjustment Max tool width 240mm Max COMFORT PACKAGE option Variable grinding wheel speed 1500 to 3000rpm Lamp Back clearance angle is motorised Grinding wheel advance is motorised Setting of the side clearance angle is pneumatic Hydraulic grinding wheel clamping. Gisdpfx Ajw Np Uuofqew Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder with E3 infeed and A3 outfeed mechanisation Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure Weinig E3 moulder infeed +pack scissors lift (3000kg). Weinig A3 drop leaf outfeed + pack scissors lift (3000kg) + pack outfeed chain conveyor. WEINIG HYDROMAT 1000 230X160mm maximum dimension No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Gisdpfxox Rbkxs Afqjw Beam 0.55kW Full documentation included. Extraction manifold included. POSSIBLE TO PURCHASE MOULDER OR MECHANISATION SEPARATELY AS NEEDED

Condition: excellent (used), Compact High Speed Planing Line Mechanisation with Stacker 1. Weinig EM814 moulder infeed with flat chain feeder 2. Weinig 820 high speed right angle moulder outfeed with cross feed sweepers 3. Weinig 811 board stacker with scissors lift (chain feed discharge options) -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). Gjdpfx Aoxb U Txefqsiw -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high) 3. Weinig cross chains after scissors lift to move full packs away from the stacker when full. Possible to supply with Weinig Hydromat moulders 100m/min as needed.

Condition: excellent (used), Year of construction: 2011, Thomas Pettersson (Sweden). Fully automatic compact high speed planing line 150m/min !!! High performance handling system suitable for use with a moulder, double end tenoner etc. consisting of the following. 1. Pack infeed system, roller and chain conveyors, 5m + 3,8m. 2. Robot layer feeder (4 layers per minute) with automatic stick collector. 3. Crossfeed system with end trimmer saws (angle adjustable), 22 cycles 400mm wide per minute.. 4. Moulder infeed (right side with adjustable fence line) with 4 feed roller accelerator 150m/min maximum speed, 5. Infeed belt with side pressure to fence. 6. Outfeed belt 5m long. 7. Board sweeper to stacker capable of stacking 80pcs/min. 8. Automatic stacker with stick magazines, 1200mm high packs, 9. Magazine for automatic loading of pallets to outfeed, holding 10 pallets. 10. Outfeed roller conveyor, 5m long.. 11. Control system with remote panels. This high speed fully automatic line could be used for feeding a moulder, resaw, multi-rip etc. It could be modified to suit feeding a double end tenorer etc also. If you need a highly efficient, compact, labour saving handling system for lengths up to 2.1m then this could be the equipment for you. Very suitable for doors, windows, furniture, specialist packaging etc. Inspection is very welcome. Gijdeth Taaopfx Afqew

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Gsdpsq Dzi Tjfx Afqjiw Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: good (used), Leadermac Speedmac 923 Maximum width 230mm Maximum thickness 160mm 9x spindles 6,000 RPM 4x side heads !!! Bottom 11kW Right 7.5kW Left 11kW Top 15kW outboard bearing Right 11kW Left 11kW Top 15kW outboard bearing Bottom 15 kW outboard bearing Bottom 30 kW outboard bearing Possible to add jointers as needed. CNC position on spindles 3,4,6 and 7. Gisdpszcu Eljfx Afqsw 105 pcs of Hydro tooling included!!! 11kW feed motor. 6-70m/min (possible to increase if needed). Automatic lubrication system. Total 137.5kW Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: excellent (used), Year of construction: 2009, LEADERMAC SPEEDMAC 923SP SPINDLES: 9 X 50MM X 6000 RPM BOTTOM (11 KW) - OUTBOARD BEARING Gijdszcu R Ijpfx Afqow RIGHT (11 KW) - LEFT (11 KW) - RIGHT (11 KW) - PROFILE JOINTER LEFT (11 KW) - PROFILE JOINTER TOP (15 KW) - OUTBOARD BEARING BOTTOM (22 KW), TOP (15 KW) - OUTBOARD BEARING + STRAIGHT JOINTER BOTTOM (15 KW) - OUTBOARD BEARING + STRAIGHT JOINTER WORKING WIDTH: 230 MM, HEIGHT: 160 MM. MAX FEED SPEED 60M/MIN (POSSIBLE TO INCREASE IF NEEDED) STRAIGHT JOINTERS. PROFILE JOINTERS. CNC POSITIONING ON SPINDLES 3, 5, 6, 8 CONNECTION: 380 V / / 50 HZ 400 AMPS. FULL DOCUMENTATION INCLUDED.

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder with E3 infeed and A3 outfeed mechanisation Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure Weinig E3 moulder infeed +pack scissors lift (3000kg). Weinig A3 drop leaf outfeed + pack scissors lift (3000kg) + pack outfeed chain conveyor. WEINIG HYDROMAT 1000 230X160mm maximum dimension No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer Gisdpfey Auunjx Afqjw No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Beam 0.55kW Full documentation included. Extraction manifold included. POSSIBLE TO PURCHASE MOULDER OR MECHANISATION SEPARATELY AS NEEDED