Used Weinig Powermat 2000 for sale (471)

Condition: excellent (used), Weinig 140/4A Four-Side Planer Working width: 140 mm Working height: Number of spindles: 6 Spindle arrangement: Bottom 3 kW Right 2.2 kW Top 3 kW Bottom 3 kW Tsdpfx Absw Tiyxozod Right 4 kW Left 3 kW Feed speed adjustable: First gear 4.3/5.3/14.5/18 m/min Second gear 8.6/10.6/29.0/36.0 m/min Total power: 21 kW

Condition: good (used), Year of construction: 2000, Weinig A5 outfeed with automatic board stacker. -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor Tsdpexftvaefx Abzed -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately

Condition: used, Year of construction: 2002, functionality: fully functional, working width: 260 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 260 mm, working height: 160 mm, power of feed motor: 4,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 5, power: 39 kW (53.03 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Unimat 1000 with grooved table Working width: 260 mm Working height: 160 mm 5 spindles Spindle diameter: 50 mm Spindle arrangement: 1-Bottom (7.5 kW) 7000 rpm 2-Right (7.5 kW) 7000 rpm 3-Left (7.5 kW) 7000 rpm 4-Top (7.5 kW) 7000 rpm 5-Bottom (5.5 kW) 7000 rpm Todsxk U Tkopfx Abzjd Feed: 4 kW / 6–36 m/min One driven roller in the table at the outfeed.

Condition: reconditioned (used), 1 x Elektronic Motor Braking Unit EMG15 Power range 3 - 15KW Voltage range 200-575V Power frequency 50Hz/60Hz Siemens EMG 15 Motor brake for Weinig machine Unimat and Hydromat series Tedpsxc D Uuefx Abzjd Working tested on Weinig machine

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Weinig paternoster stacker build/rebuild 1989 / 2025 New SEW Motors. Tjdpsxdya Aofx Abzjd New control system. New bearings. New airpipes. Min length 1500mm Max length 6000mm Speed up to 4-5 layers pr min

Condition: used, Planer profiling milling machine WEINIG Profimat 26 Super Working width 20 - 230 mm (260) Working height 8 - 120 mm (140) 5 working spindles Ø 40 mm Long infeed table (approx. 2000 mm) Bottom working spindle 4 kW / left + right 7.5 kW / top 5.5 kW / bottom finishing 5.5 kW Pneumatic pressure of feed rollers Cardan feed infinitely variable 5 - 24 m/min Feed roller before jointer Control - push button operation Todpswqda Njfx Abzod automatic lubricant pump mechanical digital displays Machine in CE design Year of manufacture 2001 Without machining tools Machine is WORKSHOP OVERHAULED in GOOD CONDITION Machine is connected and ready for demonstration in exhibition center Ex stock Lieboch

Condition: used, Used Weinig spindle motor. * Flange motor, B5 design * 15 kW * Shaft diameter: 38 mm. Available: 2 Price per unit: €690.00 + VAT. Tedpjv Iydgsfx Abzod

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder with E3 infeed and A3 outfeed Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure Weinig E3 moulder infeed +pack scissors lift (3000kg). Weinig A3 drop leaf outfeed + pack scissors lift (3000kg) + pack outfeed chain conveyor. No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer Todpfx Ajxdx Dmjbzsd No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Beam 0.55kW Full documentation included. Extraction manifold included.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Weinig Dimter ProfiPress 2500 3HF LZ Year of production: 2009 Technical condition: very good Weinig Dimter ProfiPress 2500 3HF LZ is a high frequency wood gluing press designed for the production of laminated panels and high-strength wooden components. The machine is engineered for efficient and precise length and width bonding using high-frequency (HF) technology. Key Features and Benefits: ✅ High-Frequency (HF) Technology – ensures rapid glue curing, reducing pressing time and increasing production efficiency. ✅ Robust Construction – made from high-quality components, ensuring durability and reliability. ✅ Automated Process – can be integrated into production lines for optimized workflow and enhanced efficiency. ✅ Precise Pressure Adjustment – guarantees uniform quality of the finished product. ✅ Versatility – ideal for manufacturing laminated panels, structural beams, stair treads, countertops, and other wooden elements. Technical Specifications: • Maximum Pressing Length: 2500 mm • Pressing Technology: High-Frequency (HF) • Number of Pressure Sections: 3HF (three high-frequency sections) • Pressure System: Hydraulic with precise pressure control • Application: Wide and long gluing • Glue Type: Hot-melt adhesives (e.g., PVAc, PU) compatible with HF technology • Control Options: User-friendly interface and automated gluing cycle programming • Energy Consumption: Efficient power usage for intensive production • Safety System: Sensors and protective covers compliant with CE standards Dimensions of Processed Wood: • Wood width, uniform widths for filling: 30 - 150 mm, usually 120 mm • Wood thickness: 7 - 45 mm, usually 24 mm • Wood length (min./max.): 200 - 2400 mm, usually 1250 mm When using certain additional devices, the minimum wood length must be adjusted accordingly, or a guide system must be used. Specific Pressing Pressure: 18 - 160 kN Type of Wood: Softwood / Hardwood Air Supply Data: • R1" / 1/2" - height approx. 600 mm - oil-free • Airflow: approx. 500 Nl/min (press / glue application) • Dust extraction: approx. 8 bar (extraction system) Electrical Connection Data: • (1) Press, mechanism → 14 kW • (1) High-Frequency Generator (HF) → 42 kW • Power supply voltage: 400V / 50Hz • Weight of the press: 7000 kg (position 5) • Cable channel 300 x 150 mm, recessed in the floor or flush-mounted, with a control cabinet integrated into the machine structure. Foundation: • Concrete slab covering the entire delivery area, minimum thickness 200 mm, Tjdpfjvyu Iqex Abzed compacted and reinforced from both top and bottom. • Static load of the press → see the diagram on the left. • Maximum static load per foot: approx. 150 N/cm² • Any foundation recesses, elevations, or reinforcements must be provided by the customer. • This also applies to platforms, stairs, walkways, and supply lines for pneumatics, electricity, and telephone systems. Working height (AH): 940 mm Weinig Dimter ProfiPress 2500 3HF LZ is a professional solution for manufacturing plants looking for an efficient and precise wood gluing machine. Thanks to HF technology, it significantly reduces the production cycle time while improving the quality of finished products. We also offer professional disassembly, installation, commissioning, employee training on machine operation, and service support.

Condition: reconditioned (used), 1 x Elektronic Motor Braking Unit EMG15 Power range 3 - 15KW Voltage range 200-575V Power frequency 50Hz/60Hz Siemens EMG 15 Motor brake for Weinig machine Unimat and Hydromat series Working tested on Weinig machine Tsdpfjxc D Tqox Abzsd

Condition: used, Mechanisation by Weinig, feed speed up to 43 m/min. Todpjxg Satsfx Abzsd

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Tedpfx Abju Damdjzjd

Condition: excellent (used), Movable (lift approx. 1.4 m) Weinig lifting mechanism for wood packages behind planing/strapping line. Used. Very good condition. Without hydraulic unit. Sale on behalf of customer. Tedpfxexcif So Abzsd

Condition: excellent (used), Year of construction: 2012, Weinig E3 infeed and A3 outfeed E3 Infeed Scissors lift before crossfeed. Crossfeed table to infeed accelerator. Moulder infeed accelerator. Tsdpfxev R Utns Abzjd A3 Outfeed Drop leaf. Crossfeed belt conveyor. Scissors lift with pack chains. pack outfeed chains.

Condition: excellent (used), Four-sided planer WEINIG UNIMAT 23 7/25 Technical specifications: Max planing width: 240 mm Max planing height: 130 mm Spindle diameter: 40 mm Number of spindles: 8 Spindle sequence: - bottom - right - left - right - top Tjdpfx Ajxc D Diobzod - top - bottom - universal Each spindle driven by a separate motor Number of top rubber feed rollers: 6 Number of bottom steel feed rollers: 5 Number of top steel feed rollers: 6 Extraction port diameter: 8 x 140 mm Stepless feed adjustment Feed via cardan shafts Pressure: 6 atm Electric lifting of machine body Manual table lubrication pump Power supply: 400 V Total power: 50 kW Overall dimensions: Length: 6430 mm Width: 1800 mm Height: 1700 mm

Condition: excellent (used), Year of construction: 1995, Planer - Moulder Manufacturer: Weinig Type: Profimat 23 Year of manufacture: 1995 Working width: 230 mm Working height: 120 mm Planing table length: 2,000 mm Speeds: 6,000 rpm Spindle diameter: 40 mm Todpsv Id Ngofx Abzjd Feed speed: 4 - 24 m/min Number of shafts: 6 Grooving saw: Yes Arrangement: U-R-L-R-O-U-grooving saw 1st shaft, bottom, 7.5 kW 2/3rd Shaft, right, left, 7.5 kW 4th shaft right, 7.5 kW 5th shaft top, 7.5 kW 6th shaft, bottom, 4.6 kW Groove saw: 2.2 kW Dimensions: approx. 4,500 - 2,000 - 1,800 mm Weight: approx. 3.5 tons

Condition: good (used), functionality: fully functional, working width: 255 mm, planing height: 160 mm, spindle diameter: 40 mm, planing width: 255 mm, working height: 160 mm, power of feed motor: 3,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Unimat 23 E with 5 spindles, Working width: 255 mm, Working height: 160 mm, Tjdpfexg Sa Hsx Abzjd Spindle diameter: 40 mm, Feed: 3 kW / 6 – 36 m/min, Spindle arrangement: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (7.5 kW) 4-Top (5.5 kW) 5-Bottom (4.0 kW) One driven roller at the outfeed table.

Condition: reconditioned (used), Year of construction: 2006, High-speed planer. After full maintenance. Todpfx Absh Txd Ijzed Model-Hydromat 5000 Year of manufacture-2006 №36650-280 Feed speed-6-200 m/min. Electric motor-30 kW. Working width-400 mm. Machining height-150 mm. Spindle arrangement: 1) Lower-37 kW 2) Upper-45 kW 3) Right-30 kW 4) Left -30 kW Table lubrication automatic All heads included Diameter of spindles - 50 mm.

Condition: good (used), WEINIG Unimat 23 four-sided planer max planing width 230mm max planing height 140mm Tedpfx Abjiq Dphjzjd spindles diameter 40mm 8 spindles ( last 2 universal) Spindles fully adjustable up and down; right and left Feed on cardan shafts with smooth adjustment 5 pulling rollers in the tabletop electric height adjustment of rollers sturdy planer, proven in good condition length of the machine 605cm, weight +-5000kg

Condition: like new (used), Tool measuring stand for measuring tool radius and height. Measurements can be read of digital read-outs. Technical details Tool diameter min - 100mm Tjdpfjhu Rkpsx Abzod Tool diameter max - 300mm Tool length maximum - 330mm 220v - 50hz Weight - 180 kg Supplied with operating instructions. Supplied with 40mm or 50mm arbor as needed.

Condition: used, knife: Strip planer knife Z2 Tjdsw Uiq Topfx Abzod flight circle (ø): 163 mm drilling: 50 mm length: 180 mm material: steel

Condition: used, Cabin for Weinig Unimat 300 Todpfx Asxga E Dobzjd

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Tedpfxexcvpko Abzjd Memory system Full sound enclosure No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Beam 0.55kW Full documentation included. Extraction manifold included. Possible to supply with Weinig mechanisation if needed (Year 2012)

Condition: used, Adjustment status for Weinig Powerlock Todpfx Aboxga Ewjzed

Condition: used, Adjustment status for Weinig Powerlock profile Todjxga Eqspfx Abzjd