Used Weinig Quattromat 18 for sale (502)

Condition: excellent (used), Year of construction: 2000, Four-spindle moulding machine Number of spindles: 4 Spindle configuration: bottom, right, left, top, bottom Working width: 13 - 230 mm Working height: 6 - 120 mm Feed speed: 8 m/min Feed motor power: 1.5 kW Spindle diameter: 40 mm Spindle speed: 6,000 rpm Axial adjustment range of spindles: 30 mm Adjustment range of jointer spindle: 5 mm Jointer spindle motor: 5.5 kW Top spindle motor: 4.5 kW Vertical spindle motors: 7.5 kW Motors with brake Feed roller diameter: 140 mm Length of jointer table: 2,000 mm Pneumatic pressure for feed rollers Infeed roller upstream of first lower spindle, pneumatically actuated Left pressure roller before machine infeed Codpfxey Enlfe Anfogu CE compliant Including 4 planing heads Approx. dimensions (L x W x H): 3,000 x 1,250 x 1,550 mm Weight approx.: 1,000 kg Note on used machinery: • Technical specifications and prior sale subject to change. • Stated prices are ex works, free loading at location! • Machines have been cleaned and function tested. • All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and phone number!)

Condition: excellent (used), Four-side planer WEINIG Quattromat 23 Max. planing width: 230 mm Max. planing height: 120 mm 4 heads, heads included Cedpfey E Nlasx Anfsgu Total power: 23 kW Manual vertical adjustment (up/down) Manual adjustment of planing width Branded machine, maintained in very good condition

Condition: excellent (used), WEINIG Quattromat Q23P, S/N 86825, year of manufacture 1999 Machine equipped with full enclosure and integrated sound and dust protection. Technical data: Planing width: min. approx. 13 mm / max. 230 mm (with 125 mm tool diameter) Planing height: min. approx. 6 mm / max. 120 mm (with 125 mm tool diameter) Feed speed: 8 m/min., feed motor 1.5 kW Cjdpfx Aoy Dugaonfjgu Spindle sequence: 1st spindle bottom, motor 5.5 kW 2nd spindle right (jointing) / 3rd spindle left, motor 7.5 kW 4th spindle top, motor 5.5 kW Spindle diameter D = 40 mm Accessories/Extras: 2000 mm jointer table with adjustable straight edge (adjustment range 10 mm) Rabbet device with jointing rebate cutter Manual wax pump Pneumatic feed roller pressure Pneumatically sequenced infeed roller before jointer Central lubrication points located at front of machine SICO counters Set of WEINIG Centrolock 533 planer heads Operating manual, operating tools, spare parts catalogue and electrical diagram Extraction / Connection / Dimensions: Central extraction port ø 250 mm Air velocity: 26-30 m/s Total connected load approx. 19 kW Machine dimensions L=3050 mm, W=1230 mm, H=1640 mm Condition: Used, fully functional – in good condition as shown in the photos Payment: Payment in full, net, before loading Delivery time: By arrangement Delivery: EXW Inspection: Possible at any time by appointment

Condition: good (used), WEINIG Quattromat four-sided planer max planing width 220mm max planing height 120mm 4 heads, heads included bottom spindle - 4KW, right and left 7.5KW, top - 5.5KW feed on cardan shafts with smooth adjustment electric lifting up and down Cgedev Hqn Tepfx Anfou electric adjustment of planing width branded machine preserved in good condition

Condition: good (used), Year of construction: 2015, Used, in good condition Year of construction: August 2015 (installed end of 2016) Technical description Working width (with tool cutting circle 125 mm): 20 - 230 mm Working height (with mould cutting circle 125 mm): 8 - 120 mm Six standard feed pendulums from above Two driven rollers in the machine table 1st spindle First lower horizontal spindle Motor with brake 5.5 kW (7.5 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 125 - 145 mm Folding device, incl. folding cutter 2nd spindle First right vertical spindle 5.5 KW (7.5 HP) Individual motor with brake Diameter: 40 mm Speed: 6000 rpm Tool cutting circle 40 mm below table level: 100 - 200 mm Tool cutting circle 55 mm below table level: 100 - 180 mm Max. Tool diameter behind stop plane 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 3rd spindle First left vertical spindle Individual motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 40 mm below table level 100 - 200 mm Tool cutting circle 55 mm below table level 100 - 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 4th spindle First upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Cjdpequ Sc Hofx Anfogu Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 5th spindle Second upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 6th spindle Second lower horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Maximum moulding depth 15 mm Axial adjustment movement 35 mm Spindles in general All moulder spindles dynamically balanced for high concentricity. Feed system Frequency-controlled feed 5 - 30 m/min. infinitely variable with brake 4 KW (5.5 HP) Machine stand, tables and stops Manual lubricant pump for table resin removal Machine operation Memory function For memorising the setting values of profiles. Spindle axes with electronic double displays. Function: - Saves the setting values of the finished profile under a profile number at the touch of a button - When the profile number is selected again, the electronic double displays show the setting values - The displays are synchronised by manually adjusting the spindle - 99 memory locations Electric height adjustment of the feed Centralised position of lubrication points at the front of the machine

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 89257, pressing force: 60 t, input voltage: 380 V, total height: 2,000 mm, type of input current: three-phase, working height: 2,000 mm, total length: 9,500 mm, control cabinet width: 1,000 mm, total width: 2,000 mm, year of last overhaul: 2026, pressure: 100 bar, control voltage: 12 V, workpiece height (max.): 120 mm, rotational speed (max.): 6,000 rpm, air pressure: 8 bar, We offer this ready for use WEINIG Dimter HK200 finger jointing line, year of construction 1996. Codpozatztjfx Anfegu If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), CATALOG NUMBER 6674 TECHNICAL SPECIFICATIONS - Max planing width: 150 mm - Max planing height: 130 mm Codoza Eccepfx Anfogu 7 spindles: 1) bottom horizontal, 150 mm, 3 kW 2) right vertical, 130 mm, 3 kW 3) left vertical, 130 mm, 4 kW 4) top horizontal, 150 mm, 4 kW 5) bottom horizontal, 150 mm, 3 kW 6) right vertical, 130 mm, 4 kW - Spindle diameter: 35 mm (all spindles) - All spindles adjustable up/down and right/left - 4 driven toothed feed rollers from above - 4 top rubber outfeed feed rollers - 2 top pressure rollers - Electric planing thickness adjustment: 0.25 kW - Infeed table length: 1970 mm - Central table lubrication - Stepless feed speed adjustment - Feed motor: 1.5 kW - Extraction port diameters: 6x120 mm - Dimensions (LxWxH): 4000x1300x1600 mm - Weight: approx. 3000 kg – German manufacture – 6-head machine – Used moulder/planer in very good condition Net price: 36,900 PLN Net price: 8,790 EUR Net price based on 4.2 PLN/EUR exchange rate (Significant currency fluctuations may cause price adjustments)

Condition: excellent (used), functionality: fully functional, Weinig Profimat 23 Fortec four-sided planer Working width 230mm Working height 140mm Number of spindles 6 Arrangement of spindles Bottom 7.5kw Right Left 11kw Cjdpfx Ansumxqrsfogu Top 7.5kw Top 5.5kw Bottom 5.5kw Pneumatic pressures Feed speed adjustable on variator Drive on cardan shafts CE certificate

Condition: used, functionality: fully functional, Weinig Unimat 22A four-sided planer Cgsdpfjy U Du Uox Anfou Working width: 220 mm Working height: 120 mm Number of spindles: 7 Spindle arrangement: Bottom: 4 kW Right: 4 kW Left: 5.5 kW Right: 7.5 kW Top: 7.5 kW Bottom: 4 kW Universal: 5.5 kW Feed speed adjustable up to 36 m/min Option to purchase the machine without the enclosure

Condition: excellent (used), functionality: fully functional, Raimann ProfiRip KM310M Multi-blade Saw Cgedpfx Anoy Ugk Sefou Track width: 330 mm Maximum blade spacing: 310 mm Maximum cutting height with moving blade (with clamping): 90 mm Maximum cutting height with moving blade (without clamping): 105 mm Blade size max/min: 300/250 mm Cutting width up to 1000 mm Feed speed up to 30 m/min Automatic material return to the operator

Condition: excellent (used), Catalog number 7805 TECHNICAL DATA - Track width: 340 mm - Roller width: 340 mm - Disc arbor diameter: 80 mm - Installed discs on upper shaft: 350 mm - Installed discs on lower shaft: 300 mm - Max cutting height: 200 mm - Min length of processed material: 700 mm – From above - 2 rows of kickback fingers - Smooth, slip, pressure shaft - Kickback fingers - 2 smooth, slip, pressure shafts - Saw shaft - 3 smooth pressure rollers – From below - Track conveyor - Saw shaft - Track conveyor - Infinitely variable feed speed adjustment - Main motors: 2 x approx. 55 kW - Feed motor: 3 kW - Electric up/down elevation of the main body - Manual adjustment of saw shafts - Central lubrication - Extraction port diameter: 2 x 200 mm - Dimensions (L/W/H): 2700 x 1800 x 2150 mm - Weight: approx. 5,000 kg ADVANTAGES – German-made – Double-shaft design – 2 x 55 kW motors – Used multi-blade saw, in very good condition Cjdpfozadatex Anfegu Net price: 178,900 PLN Net price: 42,590 EUR (at 4.2 EUR exchange rate) (Prices subject to change with significant rate fluctuations)

Condition: excellent (used), Catalogue number 7961 TECHNICAL DATA - Track width: 250mm - Shaft width: 250mm - Max. disc diameter: 350mm - Disc bore diameter: 70mm - Max. cutting height: 100mm - Table width with clearance: 940mm - Table length: 1700mm Top: – Pawls/kickers – Metal pressure roller, smooth – Shaft with saw blades – Metal pressure roller, smooth, 2 pcs Bottom: – Guide rail – Pawls/kickers – Smooth sliding roller – Track chain – Central lubrication – Feed motor 4kW – Main motor 37kW – Stepless feed speed control – Manual body lift – Manual shaft lift (with saw blades) Cedpfozabu Iox Anfegu – Extraction port diameter: 200mm – Overall machine dimensions (LxWxH): 1800x1500x1700mm – Weight: 1956kg ADVANTAGES – German made – Stepless feed speed adjustment – Used multi-saw in very good condition Net price: 22900 PLN Net price: 5450 EUR (based on exchange rate 4.2 PLN/EUR) (Prices may change with stronger fluctuations)

Condition: excellent (used), WEINIG HYDROMAT 22 AL four-sided planer - max. width of workpiece: 220mm - max. height of workpiece: 130mm - 8 spindles: 1) horizontal lower 220mm, 5.5kW 2) vertical right 130mm, 7.5kW 3) vertical left 130mm, 7.5kW 4) vertical right 130mm, 5.5kW 5) horizontal upper 220mm, 11kW – 5th spindle electrically adjustable up/down 6) horizontal lower 220mm, 5.5kW 7) horizontal lower 220mm, 5.5kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) universal 220mm, adjustable 360°, 7.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - top: - 6 infeed rollers, double-toothed, pulling + 1 single - 3 outfeed rollers, pulling, rubber, smooth double + 3 single - meter counter - bottom: - infeed roller, toothed, pulling, swiveling in the lower bed - 3 metal rollers, pulling, smooth - feed on Cardan shafts Codey Ux Dqopfx Anfegu - rollers pneumatically pressed - stepless feed speed adjustment + 2 speeds 10-60m/min - feed motor 10kW - electric setting of planing thickness - body lifting motor 0.75kW - central lubrication of the bed - diameter of extraction nozzles 5x140mm, 3x 120mm - machine dimensions L/W/H 4680x1780x1850mm - control cabinet dimensions (on pallet) 1020x1000x2230mm - weight approx. 5000kg - Infeed conveyor with centering device: - roller width 450mm - 1 toothed pulling roller at the inlet - 22 smooth pulling rollers - adjustable top pressure - conveyor length 9020mm - stepless speed adjustment 10-60m/min - motor 0.75kW - dimensions L/W/H 9020x790x1150mm Net price: 179900 PLN Net price: 42850 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), CATALOG NO. 7133 TECHNICAL SPECIFICATIONS Cgjdpfxjy Ux Aae Anfsu - Max. working width: 220 mm - Max. working height: 120 mm – 5 spindles: 1) Bottom horizontal, 220 mm, 5.5 kW 2) Right vertical, 120 mm 3) Left vertical, 120 mm; spindles 2 & 3: 11 kW 4) Top horizontal, 220 mm, 11 kW 5) Bottom horizontal, 220 mm, 5.5 kW - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - Pneumatic pressure hold-downs - Top: 4 powered, gear-driven feed rollers (including 2 double rollers) - Top: 1 double outfeed roller, smooth, rubber-coated - Bottom: powered outfeed roller, rubber-coated - Feed on Cardan shafts - Variable feed speed adjustment - Feed motor: 2.2 kW - Lifting motor: 0.25 kW - Electric planing thickness adjustment - Infeed table length: 1970 mm - Central lubrication system - Extraction nozzle diameter: 4 x 120 mm, 1 x 140 mm - Dimensions (L/W/H): 3500 x 1550 x 1400 mm - Weight: 1750 kg ADVANTAGES – Equipped with 5 heads – German-manufactured – Not repainted – Used planer, in very good condition Net price: 43,900 PLN Net price: 10,450 EUR (according to exchange rate of 4.2 EUR) (Prices may vary with significant exchange fluctuations)

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 40/50 mm # 2809 Weinig Unicontrol 6 ----- Machine will be checked in our factory before delivery! Technical Data Summary (Please inquire about any additional accessories included) Item 1: Cut-off saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide light for identifying the saw cut CNC-controlled length stop ----- > Length: 3,600 mm > Electronic length stop including positioned cut-off saw Item 2: Tenoning spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (Stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 3000 rpm > Maximum tool swing diameter: 320 mm > Spindle diameter: 50 mm > Maximum tool diameter: 360 mm > Motor power: 11 kW Item 3: 1. Profiling spindle (co-rotation and conventional) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 7.5 kW Item 4: 2. Profiling spindle ----- > Position: Vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, Cjdsxtvgkopfx Anfjgu for the production of narrow, short parts (e.g., glass-dividing muntins) Munch guide consisting of: Munch support strip from above in the area of ??the vertical right-han d profile milling unit and profiling spindle. Item 5: Horizontal top profile milling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Spindle speed: 5,850 rpm > Maximum tool swing diameter: 130 mm > Axial travel: 52 mm, indexed in 2 positions > Radial travel: 125 mm, indexed in 2 positions Item 6: 3rd profiling spindle (fitting spindle) ----- > Position: Vertical right > Tool clamping length: 160 mm > Axial travel: 90 mm, indexed in 3 positions > Radial travel: 100 mm, indexed in 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Maximum tool swing diameter: 210 mm > Motor power: 3.0 kW Further features ----- > Electric feed height adjustment including mechanical digital display and manual feed bar clamping > Rebating device for tear-out-free rebating > Double part package > Return conveyor for 1-person operation: swivel conveyor > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC with Windows PC control/NEXUS Extraction nozzle diameter: ----- Crosscut saw 80 mm Tenoning spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Grooving device from above 80 mm Hardware spindle 120 mm -----...

Condition: excellent (used), Weinig Unimat 22 planer. In very good working condition. Cgodpfx Anox Rrr Hofou

Condition: excellent (used), Double-sided milling machine WEINIG uniplan Cgedpfxet Uh Dqj Anfju

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) Working height: 10 - 160 mm . Working width: 20 - 230 mm. 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing Cedpfx Aneyl Rmksfegu 11kW feed motor, 60m/min. Heavy duty feed works. 10x top feed rollers. First top feed roller with clutch installed for use with mechanisation. 5x bottom feed rollers. Automatic lubrication system. Electric digital display memory system. CNC POSITIONING ON SPINDLES 3, 5 & 8 Possible to supply with Weinig moulder infeed and outfeed

Condition: used, Year of construction: 2001, Number of boring spindles 8 St. Working width 230 mm Working height 160 mm Feed motor 5,5 kW Feed speed 36 m/min. Control Logocom Planing and moulder Weinig Unimat 3000 Brillant. Computer-controlled ProfiCenter for planing and profiling work with CNC-controlled spindles and loading magazine Weinig EM11. The control panel was equipped with the current Simatic Panel PC677C-15" in 2021. The sale takes place on behalf of the customer ex works. A viewing is possible at any time by arrangement. Spindle 1: Bottom / HSK Powerlock / 12,000 rpm Spindle 2: Right / HSK Powerlock / 4,000 - 12,000 rpm Cedpey Ty H Dofx Anfogu Spindle 3: Left / HSK Powerlock / 4,000 - 12,000 rpm Spindle 4: Right / HSK Powerlock / 4,000 - 12,000 rpm Spindle 5: Top / HSK Powerlock / 4,000 - 12,000 rpm Spindle 6: Bottom / HSK Powerlock / 4,000 - 12,000 rpm Spindle 7: Top / HSK Powerlock / 4,000 - 12,000 rpm Spindle 8: Bottom / HSK Powerlock / 4,000 - 12,000 rpm All spindles: CNC controlled (except spindle 6

Condition: used, Tenoning spindle 2 Stk. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 NC Window System — Optional: Extensive Tooling Set ----- Optionally available (at an additional cost): IV 68 Wood, Wood/Aluminum IV 78 Wood, Wood/Aluminum IV 68 Entrance Doors Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 10 NC Window System ----- Cross-cut Saw ----- with laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; spindle speed: electronically variable (with brake) from 3,000 to 6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal bottom rounding unit ----- Axial adjustment travel: mechanically coupled with cut-off saw 1st Tenoning and Slotting Spindle ----- Motor power (with brake): 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position (below table): 5–10 mm Radial adjustment travel: fixed 2nd Tenoning and Slotting Spindle ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 320 mm Axial adjustment travel: NC axis Radial adjustment travel: NC axis Home position (below table): 5–10 mm 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm 2nd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Horizontal Profiling Unit (Top) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Max. tool cutting circle: 130 mm Pneumatic adjustment: 8 positions (axial and radial) 3rd Profiling Spindle Cgjdpfxjzawizs Anfou ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Vertical Profiling Unit (Right, at Machine End) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 160 ...

Condition: excellent (used), Catalog number 7994 TECHNICAL DATA - max. width of the workpiece 230mm - max. height of the workpiece 130mm 7 spindles: 1) horizontal lower 230mm 4kW 2) vertical right 130mm 3) vertical left 130mm (2 and 3 spindles) 11kW 4) horizontal upper 230mm 5.5kW 5) horizontal upper 230mm 5.5kW 4 and 5 spindles are electrically adjustable up/down 6) horizontal lower 230mm 4kW 7) universal 230mm, adjustable at an angle of 360° 5.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - 4 infeed rollers from above, geared, pulling - 4 outfeed rollers from above, pulling, rubber, smooth, including 3 double rollers - metal roller from below, pulling - feed on cardan shafts - rollers pneumatically pressed - stepless speed adjustment of the feed rate on an inverter - feed motor 3kW - working pressure 6-10 bar - electric adjustment of the planing thickness - central lubrication of the table - length of the infeed table 1960mm - diameter of the dust extraction nozzles 3x120mm, 4x140mm - dimensions L/W/H 5360x1800x1660mm - weight approx. 4000kg ADVANTAGES – German production, WEINIG brand – with 7 heads – DTR documentation – universal spindle – used planer, very good condition Codpey T Nu Defx Anfsgu Net price: 75900 PLN Net price: 18070 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to significant fluctuations)

Condition: good (used), functionality: fully functional, Planing width 610 mm Sturdy cast iron construction Jointer fence Cgsdpfx Ajx U Dgdenfou Auxiliary stop 4 kW, 380 Volt 2-key cutterblock Tables fold upwards Machine ready for immediate use Transport possible at extra cost!

Condition: ready for operation (used), Year of construction: 1998, working width: 230 mm, overall weight: 2,500 kg, spindle speed (max.): 6,000 rpm, This 5-spindles WEINIG DIMTER PROFIMAT 23 E was manufactured in 1998. It features a working width of 230 mm and a working height range of 8-120 mm. The machine operates at a spindle speed of 6000 rpm and has a feed rate of 5-24 m/min. If you are looking to get high-quality wood planning capabilities, consider the WEINIG DIMTER PROFIMAT 23 E machine we have for sale. Contact us for further details. • Condition note: Not rebuilt – without warranty • Working height: 8–120 mm • Number of spindles: 5 (top, right, left, bottom, top) Cgjdpfszaq Taex Anfeu • Feed rate: 5–24 m/min • Total power consumption: approx. 25 kW • Feed table length: approx. 2000 mm

Condition: excellent (used), length 245 mm width 245 mm Codpfoylcpdsx Anfegu height 1090 mm

Condition: used, Number of boring spindles 7 St. Working width 260 mm Working height 160 mm Cgjdpfx Ajxzdwyenfsu Length of the planing table 2.500 mm Feed motor 4 kW Feed speed 30 m/min.