Used Weinig Unimat 23 Sp for sale (475)

Condition: excellent (used), Year of construction: 2006, operating hours: 4,794 h, functionality: fully functional, machine/vehicle number: 106442, WEINIG FOUR-SIDED PLANER TYPE UNIMAT SUPER 4 YEAR OF MANUFACTURE 2006 NUMBER OF HOURS WORKED 4794 ADDITIONALLY WEINIG EM 15 FEEDER TYPE 715 9177247 Machine in very good condition TECHNICAL PARAMETERS: planing width 150 mm planing height 50 mm spindle diameter 40 mm equipped with tools 1) lower head 11 kW 6000 U/min 2) upper head 22 kW 7000 U/min 3) lower head 5.5 kW 6000 U/min feed motor 2.2 kW feed regulated on the inverter feed on cardan shafts two side rollers pneumatic five upper steel pulling rollers one rubber upper roller grooved table length of the preliminary table 1975 mm electric adjustment of the upper head electric adjustment of the roller height automatic central lubrication WEINIG EM 15 belt feeder guiding channel belt width 250 mm stepless feed, regulated by a frequency converter hydraulic unit 1.5 KW (2 HP) feed speed 10-50 m/min width of the feed rollers 20 mm feeder length 4600 mm Machine connected in the production cycle Pgodpfxovnr Eps Ab Ijw

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, For sale is a used four-sided planer/moulder from Weinig with 7 spindles and powered infeed roller conveyor. The machine has been in operation since at least 1985 and was overhauled in the workshop in 2007. It is in working condition but is no longer in use. The exact year of manufacture is unknown; based on its design and equipment, it is likely a Weinig Unimat 17 series machine from the 1980s. Technical data (approximate values): - 7 spindles - Spindle diameter: 40 mm - Working width: approx. 20 – 170 mm - Working height: approx. 8 – 120 mm - Tool diameter: up to approx. 160 mm - Feed speed: 6 – 24 m/min - Voltage: 380 V / 50 Hz Pgodpjw Rkqgjfx Ab Ijw - Weight: approx. 4,500 kg - Including powered infeed roller conveyor - Including various cutters (see photo) Note: This is a used, older model machine, being sold without warranty. Inspection by appointment possible.

Condition: used, Year of construction: 2005, Weinig Unimat 500 Moulding machine Description; Dimensions of the infeed table: 2500 mm Number of axes: 5 Pgsdpew Ebacefx Ab Isw Spindle Sequence: Bottom-right-left-top-bottom Mobile spindle: No Planing width: 20 / 230 mm Planing height: 12 / 120 mm Throughput: 24m/min Groove bed: No Other comments:- (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), Year of construction: 2015, Used, in good condition Year of construction: August 2015 (installed end of 2016) Technical description Working width (with tool cutting circle 125 mm): 20 - 230 mm Working height (with mould cutting circle 125 mm): 8 - 120 mm Six standard feed pendulums from above Two driven rollers in the machine table 1st spindle First lower horizontal spindle Motor with brake 5.5 kW (7.5 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 125 - 145 mm Folding device, incl. folding cutter 2nd spindle First right vertical spindle 5.5 KW (7.5 HP) Individual motor with brake Diameter: 40 mm Speed: 6000 rpm Tool cutting circle 40 mm below table level: 100 - 200 mm Tool cutting circle 55 mm below table level: 100 - 180 mm Max. Tool diameter behind stop plane 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 3rd spindle First left vertical spindle Individual motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 40 mm below table level 100 - 200 mm Tool cutting circle 55 mm below table level 100 - 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 4th spindle First upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 5th spindle Second upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 6th spindle Second lower horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Maximum moulding depth 15 mm Axial adjustment movement 35 mm Psdsqu Sc Hjpfx Ab Isgw Spindles in general All moulder spindles dynamically balanced for high concentricity. Feed system Frequency-controlled feed 5 - 30 m/min. infinitely variable with brake 4 KW (5.5 HP) Machine stand, tables and stops Manual lubricant pump for table resin removal Machine operation Memory function For memorising the setting values of profiles. Spindle axes with electronic double displays. Function: - Saves the setting values of the finished profile under a profile number at the touch of a button - When the profile number is selected again, the electronic double displays show the setting values - The displays are synchronised by manually adjusting the spindle - 99 memory locations Electric height adjustment of the feed Centralised position of lubrication points at the front of the machine

Condition: ready for operation (used), working width 230mm working height 120mm 5 spindles spindles set: bottom/right/left/top/bottom spindles diameter 40mm two axes heads regulation Podpow Afkajfx Ab Ijgw variable regulated feeder spindles speed 6000 RPM

Year of construction: 2005, condition: ready for operation (used), Additional Equipment Includes approx. 70 cutter heads Z4 Several hundred new serrated-back knife blanks This WEINIG Unimat 500 was manufactured in 2005. A robust woodworking machine featuring a working range of 230 x 120 mm and five spindles, it ensures efficient processing with variable feed speeds from 4 to 30 m/min. Spindle power outputs include 4 kW for infeed and outfeed, and 7.5 kW for right/left and top spindles. Consider the opportunity to buy this WEINIG Unimat 500 woodworking machine. Contact us for more information about this machine. Application Types Other Woodworking Machinery Pgsdpfxewkxd Aj Ab Ijw

Condition: used, Hydro-fine planing machine Weinig Uniplan 23 for two-sided surface finishing, as an alternative to sanding (e.g. in window construction) with high-performance spindles. * Very good original condition spindles: 2 Podpfst Rmbmsx Ab Iogw Spindle arrangement: Bottom (7.5 kW) – Top (7.5 kW) spindle arrangement: Bottom (7.5 kW) – Top (7.5 kW) working width: 230 mm working height: 120 mm Spindle ø: 50 mm feed: 3 kW // max. 36 m/min Spindle speed: 7,200 rpm Jointers: Yes jointer: Yes Counter bearing: Yes Short parts package: Yes

Year of construction: 1987, condition: excellent (used), working width 170 mm planing height 120 mm table surface length 1950 mm 5 spindles: 1. lower 2. right 3. left 4th top 5. universal Podpfx Abolx Em Us Iegw feed speed 6.5 - 49 m/min. cardan feed electrically lifted pressure beam

Condition: excellent (used), Four-side planer WEINIG Unimat 500 Memory system control, 3 axes controlled from the operator panel (width, height, pressure roller positioning), Grooved table, cutterhead arrangement and motor power: bottom head 7.5 kW, right and left 11 kW each, top 11 kW, top 5.5 kW, and bottom 5.5 kW, max planing width 230 mm, max planing height 120 mm, spindles fully adjustable, spindle diameter 40 mm, feed via cardan shafts with stepless adjustment, central lubrication, machine in original, very good condition. Everything works perfectly. Pgsdpfew Dn I Rsx Ab Ijw Machine dimensions: length: 470 cm, width: 200 cm, height: 200 cm, weight approx. 3000 kg.

Condition: used, Year of construction: 2003, High performance planer Weinig type Hydromat 23 Planing and moulding machine Weinig Hydromat 23 for four-sided planing and moulding of wood with feed rate up to 100 m/min. Original data of the machine, technical modifications reserved. - spindles: 8 - Spindle arrangement: 1. bottom 18,5 kW // 6.000 rpm // flight circle 125 - 180 mm // counter bearing Pgodjup Av Dopfx Ab Ijw 2. right 22 kW // 6.000 rpm // flight circle 112 - 250 mm 3. left (22 kW) // 6.000 rpm // flight circle 112 - 250 mm 4. top (22 kW) + chamfering unit // 6.000 rpm // flight circle 112 - 250 mm // counter bearing 5. bottom (15 kW) // 6.000 rpm // flight circle 112 - 250 mm // counter bearing 6. top (22 kW) // 6.000 rpm // flight circle 112 - 250 mm // counter bearing 7. bottom (15 kW) // 6.000 rpm // flight circle 112 - 250 mm // counter bearing 8. universal (11 kW) // 6.000 rpm // flight circle 112 - 200 mm - Spindle diameter: 50 mm - Working width: 20 - 230 mm - Working height: 12 - 160 mm - Feed 22 kW // approx.: 8 - 100 m/min - Year of manufacture: 2003 - ATS system - Drive for horizontal spindles via toothed belts - 5 driven rollers in the table - Air cushion system in the machine table - Short infeed table with driven 4 rollers - 400 V // 50 Hz

Condition: excellent (used), working width 230mm working height 120mm 6 heads heads set: bottom/right/left/top/top/bottom Pedpfew Afcvjx Ab Ijgw spindles diameter 40mm Memory System control table lubrication spindles speed 6000 RPM

Condition: ready for operation (used), Technical characteristics Working width : 20 to 300 mm Pgoder Av T Hopfx Ab Isw Working height : 8 to 120 mm Feeding speed 6 to 46 m/min Heavy drive (15 kW) 9 shafts Superior soundproof option Composition : Lower spindle 11 kW, diameter 50 mm Right-hand spindle 11 kW, diameter 40 mm Left-hand spindle 11 kW, diameter 40 mm Upper shaft 11 kW, diameter 50 mm Lower shaft 11 kW, diameter 50 mm Upper shaft 11 kW, diameter 50 mm Lower shaft 11 kW, diameter 50 mm Upper shaft 11 kW, diameter 50 mm Lower shaft 11 kW, diameter 50 mm Machine sold with input mechanization : chain transfer 6000 x 2500 mm Special configuration, ideal for parquet and deck boards Power and Motors Voltage: 400 V Pluging: Three-phased Power: 114 Kw Motor: 9 x 15 CV Overall dimensions Lenght: 5200 mm Width: 2200 mm Height: 1800 mm

Condition: used, Year of construction: 2007, from training workshop, public facility, Pgedpfovwghksx Ab Iew chrome-plated stops and machine table used, top condition, hardly used, top equipment Make Weinig Type Unimat 300 Year of manufacture: 2007 Number of spindles 5 Spindle arrangement u-right-li-o-b Motor brakes Planing width approx. mm 20-230 Planing height approx. mm 8-160 Spindle diameter mm 40 Table length approx. mm 2000 Pre-milling cutter Pneumatic pressure of the rollers Protective cover Table lubrication lubricant pump Feed in front of the planer Feed speed continuously variable 5-30 m/min. Profiling D 125 - 200 mm Electrical adjustment of thickness shaft Digital displays complete. incl. profiling Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition, as inspected, without guarantee or warranty

Condition: good (used), working width 230mm Pedpfxjvtt Aye Ab Iegw working height 120mm spindle diameter 40mm 4 heads + unit for cutting glazing bead control from ATS panel head adjustment in two axes electric adjustment of the pressure beam smooth adjustment of feed speed The machine worked in line with other machines.

Condition: excellent (used), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, equipped with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed unit Planer/moulder with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed, frequency-controlled, 8–80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th universal spindle 11.0 kW (four-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/stop brake units • Pneumatically supported top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced spacing between feed rollers • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Connected load approx. 145 kW / approx. 400 A • Free-standing electrical cabinet • Operating instructions, spare parts list and wiring diagram included Pgsdpfx Abswvqklj Iow • Machine sold without cutterheads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL bearings All motors newly fitted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other new parts fitted in the machine Condition: see attached photos – technically in excellent condition Infeed mechanization unrefurbished – complete – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale excepted.

Condition: used, Year of construction: 2006, Manufacturer: Weinig Model: Unimat Super 4 Year of manufacture: 2006 Four side planer Manufacturer: WEINIG restored Model: UNIMAT SUPER 4 with mechanization of short workpieces EM15 - Year of manufacture: 2006 Technical specifications - Working width: max 150 mm - Working width: min 25 mm - Working height: max 50 mm - Working height: min 15 mm - Number of spindles: 3 - Power top spindle: 22 kW Pgodpfx Ajqprk Tjb Iew - Power bottom spindle: 11 kW - Spindle rotation speed: max 1/min 7.000 rpm - Spindle diamete: 40 mm - Table length: 2.000 mm - Feedrate max: 24 m/min - Continuously variable feed - Seperate motor per spindle - Roller infeed Cardanic drive - Infeed from magazine - Motoric adjustment Planing height - Lubrication pump automatic - WEINIG Face-milling cutter - WEINIG EM 15 - Total connection: 45 kW

Condition: excellent (used), working width 230mm working height 120mm 5 heads heads set: bottom/right/left/top/bottom spindles diameter 40mm variable regulated feeder feeder with cardan pneumatic pressure of feeding rolls table lubrication Podpfow Afbljx Ab Ijgw

Condition: ready for operation (used), Technical characteristics Capacity : 230 x 120 mm Feeding speed 5-30 m/min 2500 mm infeed table Digital axis positioning 5 shafts : Lower shaft 7.5kW Right left shapers 11kW Upper planer 11kW Lower planer 7,5kW Power and Motors Voltage: 400 V Pluging: Three-phased Pgedpeuarxzefx Ab Iow Power: 40 Kw Overall dimensions

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, Planing size 220 x 150 mm, grooved bed, electric height and width adjustment Machine in operation, works. CHF 14500.— excl. VAT From site 4102 Frenkendorf Switzerland Pgjdpfx Abeu Sntze Iow

Condition: excellent (used), working width 230mm working height 120mm 5 heads heads set: bottom/right/left/top/bottom spindles diameter 40mm two axes heads regulation Podpew Afa Iefx Ab Iogw variable regulated feeder feeder with cardan pneumatic pressure of rolls

Condition: ready for operation (used), Technical characteristics Capacity : 230 x 120 mm Max. tool Ø 200 mm 5 shafts ATS control Composition : Lower planer 5.5 kW, bore 40 mm Right-hand spindle moulder 5.5 kW, 40 mm bore Left-hand spindle moulder 5.5 kW, 40 mm bore Pgedpfjqxm S Sex Ab Iew Top planer 5.5 kW, 40 mm bore Lower planer 5.5 kW, 40 mm bore Feeding speed : 5-35 m/min Infeed table length : 2000 mm Roller in table Pneumatic pressure Automatic table lubrication Power and Motors Voltage: 380 V Pluging: Three-phased Overall dimensions

Condition: excellent (used), working width 230mm working height 120mm Pgedpfsqfd Dljx Ab Iew 4 spindles spindles set: dolna/prawa/lewa/górna spindles diameter 40mm pneumatic pressure of feeding rolls table lubrication

Condition: excellent (used), working width 230mm working height 120mm 6 heads heads set: bottom/right/left/top/top/bottom spindles speed 6000 rpm Pgodpfx Abspccy Ae Isw variable feeding speed adjustment to 30m/min pneumatic pressure of feeding rolls POWERCOM Controll infeed table length 2470mm

Condition: excellent (used), Year of construction: 1994, working width 230mm working heigth 120mm 5 heads heads set bottom/right/left/top/bottom spindles diameter 40mm two axes heads regulation Psdpepgu R Asfx Ab Iegw variable regulated feeder spindles speed 6000 RPM year 1994

Condition: excellent (used), functionality: fully functional, Description of the machine Psdpfx Aovit Inob Iegw working width 230mm working height 130mm 5 heads + chamfering unit arrangement of heads: bottom/right/left/upper/lower rotation of heads 6000 rpm Memory system smooth adjustment of the feed speed up to 30m/min feed on cardan shafts table top lubrication pneumatic pressure feeders of pulling rollers