Used Weinig for sale (474)

Condition: excellent (used), Catalogue No. 6747 TECHNICAL DATA - Maximum planing width: 170 mm Dodex Rquajpfx Agkecd - Maximum planing height: 130 mm 7 spindles: 1) Bottom horizontal spindle: 170 mm, 4 kW 2) Right vertical spindle: 130 mm, 5.5 kW 3) Left vertical spindle: 130 mm, 5.5 kW 4) Additional right vertical spindle: 130 mm, 5.5 kW 5) Top horizontal spindle: 170 mm, 4 kW - 5th spindle with electric height adjustment 6) Additional bottom horizontal spindle: 170 mm, 5.5 kW 7) Universal spindle: 170 mm, adjustable up to 180°, 7.5 kW - Spindle diameter: 35 mm (all spindles) - All spindles adjustable vertically and horizontally - Top: 6 powered feed rollers (toothed), including 2 double rollers - Top: 4 outfeed rubber rollers - Pneumatically pressed rollers - Side pressure roller included - 2 guide rails in the table - Electrically adjustable planing thickness: 0.37 kW - Infeed table length: 2,480 mm - Stepless feed speed adjustment - Feed motor: 2.2 kW - Extraction port diameters: 1 x 135 mm, 5 x 120 mm - Dimensions (LxWxH): 5,550 x 1,900 x 1,660 mm - Weight: approx. 3,500 kg FEATURES – Made in Germany – Equipped with 7 cutterheads – Universal spindle – Used planer, in very good condition Net price: 27,900 PLN Net price: 6,640 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Year of construction: 2003, condition: used, Technical data: - Manufacturer: Weinig - Type: Unimat Super 4 - Year of manufacture: 2003 - Working width: 25 - 150 mm - Working height: 15 - 50 mm- Shaft arrangement: Spindle 1 below: Planing and milling the guide groove 125x40x40 mm, Z=2 125x120x40 mm, Z=2 Spindle 2 above: Combination tool consisting of special planing head with guide groove and 2 flat milling cutters. Precise thickness planing and flat milling of the gluing surfaces on the right and left. Face milling cutter on the right: 240x17x40mm, Z=8 Special planing head: 125x240x40mm, Z=4 Face milling cutter on the left: 240x80x122mm, Z=8 Tool flight circles 125 and 250mm Spindle 3 below: Removing the guide groove and finish planing. 125x170x40mm, Z=4 - Spindle 1: 11 KW - Spindle 2: 18.5 KW - Spindle 3: 5.5 KW - Feed engine: 2.2 KW - Feedspeed: 5-20 m/min. - Speed spindle 1 and 3: 6.000 rpm. - Speed spindle 2: 7.000 rpm. - Transport rollers D (hardened): 140 mm - Length of infeed table: 2.000 mm - Hardened machine tables - Guide groove in machine table - Suction nozzles 2x140 mm, 1x160 mm - Volume flow: approx. 5,500 m³/h - Volts/Hz: 400/50 Djdpfx Ajyatffsgkscd - Location: Blomberg warehouse from 01/2026

Condition: used, Year of construction: 2006, total width: 3,580 mm, total height: 1,840 mm, Dimensions (LxBxH): 180 x 358 x 184 cm Price: On request - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 106992 - Number of spindles [pcs.]: 4 - └ Spindle 1: - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 30 - - Max. planing block diameter [mm]: 130 - - Tool present: Yes - └ Spindle 2: - - Motor power [kW]: 7.5 - └ Spindle 3: - - Motor power [kW]: 7.5 - └ Spindle 4: - - Motor power [kW]: 7.5 Dsdpfswnhpvex Agkecd - Feed table length [mm]: 1780 - Feed roller diameter [mm]: 130 - Feed motor [kW]: 3 - Conveyor drive: Cardan drive - Diameter extraction nozzle [mm]: 140 - Voltage [V]: 400 - Current consumption [A]: 88 - Fuse [A]: 100 - Power [kW]: 41.0 - Transport dimensions: 1800mm x 3580mm x 1840mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2002, total width: 7,660 mm, total height: 2,090 mm, Dimensions (LxBxH): 160 x 766 x 209 cm Price: On request Four-side moulder Weinig Profimat 26 S, 6head Year of construction 2002 Machine number 95514 min/max Working height 8/120 mm min/max Working width 20/230 mm Working speed 5/24 m/min Spindle speed 6000 rpm Spindle diameter 40mm Dcsdpewng I Defx Agksd Engines 1. Spindle - under ..kW 2nd/3rd Spindle - left/right .kW 4. Spindle - above 11kW 5. Spindle - above 11kW 5. Spindle - under ..kW Dimensions 3900 x 1800 x 1900 mm (L x W x H), weight 2500 kg - Year: 2002 - Documentation available: No - CE certificate present: No - Transport dimensions: 1600mm x 7668mm x 2090mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1986, total width: 6,030 mm, Dimensions (LxW): 175 x 603 cm Four-sided planer Weinig Profimat 22N Serial number: 226 - 742 400v, 40Amp. Max working width 220mm Max working height 120mm Input table length 1950mm Throughput speed 4-20 m/min Spindle diameter 40mm Speed spindles 6000 U/min 1st spindle, bottom: kW 2nd & 3rd spindle, left & right: kW 4th spindle, top: kW Dsdpfx Agewnhh Sjkocd Dimensions; 3400x1500x1400mm, Own weight 1600 kg - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 226 - 742 - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), CATALOG NUMBER 6575 TECHNICAL DATA - Max. workpiece width: 230 mm - Max. workpiece height: 170 mm - 7 spindles: 1) Lower horizontal, 230 mm, 11 kW 2) Right vertical, 170 mm 3) Left vertical (spindle 2 & 3), 170 mm, 11 kW 4) Right horizontal, 170 mm, 5.5 kW 5) Upper horizontal, 230 mm, 11 kW 6) Lower horizontal, 230 mm, 7.5 kW 7) Universal, 230 mm, rotatable 360°, 7.5 kW - All spindles adjustable up/down, left/right - Spindles 3 and 5 electrically adjustable - ATS system - Spindle diameter: 40 mm - Electric brakes - From above: 4 driven infeed rollers, toothed, including 1 double roller - From above: 1 double rubber driven infeed roller - From above: 1 double rubber driven outfeed roller - From below: 2 metal driven feed rollers, smooth - From below: 1 double rubber driven feed roller - Feed via Cardan shafts Dsdpfx Agox Rc S Djkecd - Pneumatically loaded feed rollers - Infinitely variable feed speed: 6-24 m/min - Feed drive motor: 5.5 kW - Electric thickness adjustment - Body lifting motor: 0.55 kW - Central table lubrication - Extraction port diameter: 7 x 140 mm - Dimensions (L/W/H): 5800 x 2050 x 1850 mm - Weight approx.: 4500 kg FEATURES – German-made, WEINIG brand – 7-head planer – Universal spindle – Equipped with ATS – For wet and dry timber – Used planer, in very good condition Net price: 159,900 PLN Net price: 38,070 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (Price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 6904 TECHNICAL DATA - Maximum workpiece width: 230 mm Dcedpfsx Rq Iysx Agksd - Maximum workpiece height: 130 mm 6 spindles: 1) Bottom horizontal: 230 mm, 5.5 kW 2) Right vertical: 130 mm 3) Left vertical: 130 mm (spindles 2 and 3), 7.5 kW 4) Top horizontal: 230 mm, 5.5 kW 5) Bottom horizontal: 230 mm, 5.5 kW 6) Universal: 230 mm, adjustable 360°, 5.5 kW - All spindles adjustable up/down, right/left - Spindles 1, 2, 3, 4, 5 equipped with electric brake - Spindle diameter: 40 mm - 5 top infeed, toothed feed rollers - 4 top outfeed, smooth rubber feed rollers, including 2 double rollers - 1 bottom rubber feed roller - Feed via Kardanic shafts - Pneumatically pressed rollers - Stepless speed feed adjustment - Feed motor: 4 kW - Operating pressure: 6–10 bar - Electric thickness adjustment - Lifting motor: approx. 0.55 kW - Central table lubrication - Infeed table length: 1970 mm - Extraction ports: 2x140 mm, 4x135 mm - Dimensions (LxWxH): 4430x1830x2000 mm - Weight: approx. 3500 kg ADVANTAGES – German-made, WEINIG brand – 6-head (moulder) – Complete technical documentation (DTR) – Universal spindle – Used planer/moulder, very good condition Net price: 82,900 PLN Net price: 19,738 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Multirip saw Max. Cutting width 310 mm Chain width 340 mm Max. Passage width / input width 650 mm Max. Cutting height with Quickfix clamping flange 110 mm Saw shaft diameter 65 mm Min. timber length 500 mm Max. Feed speed 35 m/min, variable Motor power 22.0 kW, 400 V, 50 Hz Feed motor 1.3 kW, 400 V, 50 Hz Saw blade diameter min./max. 300/ 350 mm Working height 850 mm Extraction diameter 250 mm Required extraction volume 5300 m3/h Quickfix saw blade attachment Electric height adjustment of the saw shaft Electric height adjustment of the pressure unit Dcjdpfxetwy Iuo Agkjd Dimensions approx. L x W x H = 1750 x 1750 x 1500 mm Weight 1850 kg Incl options: Oil level monitoring SafetyPlus Quickfix Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Tenoning and Slotting Machine WEINIG Type 51 Pivoting studio window device with digital angle display Rolling table with automatic feed rate of 6 m/min. Rolling table length approx. 2,100 mm Pneumatic workpiece clamping Automatic countershaft change Crosscut saw Pneumatically timed 4-station turret Motor approx. 3 kW / 380/400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Slotting spindle Diameter D = 50 mm Clamping length 320 mm Spindle motor approx. 11 kW / 380/400 V / 50 Hz Spindle speed 3,000 rpm Tool diameter max. 320 mm Length stop system Machine including operating tools Installation dimensions L x W approx. = 2700 x 2800 mm Weight approx. 2000 kg Djdpfev Tb Hgox Agkecd Note on used machines: • Errors in technical specifications and prior sale excepted. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and function-tested. • All machines are sold as seen without any warranty claims. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Year of construction: 2010, condition: good (used), Weinig GRECON TURBO S finger jointing line - German production - DTR, CE - year of manufacture 2010 - high efficiency up to 200 elements / min - 28 km / 8h TECHNICAL PARAMETERS: Wood parameters - width 60 - 225 mm - thickness 18 - 48 mm - length 300 - 2000 mm - pressing length 8100 - 16400 mm - power consumption 150 kW - air consumption 3100 Nl/min - suction capacity 14845 m3/h - two milling stations - undercutters - connecting with a dash and a zigzag - loading with a conveyor with spacers - package width 600 mm - divided ironing length Folded machine dimensions - length 42000 mm - width 6000mm - height 2100 mm Dcedpfxjin Uulo Agkod

Condition: used, Year of construction: 2007, functionality: fully functional, working width: 150 mm, planing height: 50 mm, spindle diameter: 40 mm, planing width: 150 mm, working height: 50 mm, - after technical inspection - German manufacture - year of manufacture: 2007 - equipped with Weinig EM 15 belt feeder TECHNICAL PARAMETERS: Dcsdpfxow E I Ruj Agkjd - planing width: 150 mm - planing height: 50 mm - spindle diameter: 40 mm - first bottom head: 11 kW at 6000 rpm - second top head: 22 kW at 7000 rpm - third bottom head: 5.5 kW at 6000 rpm - feed motor: 2.2 kW - feed speed adjustable via inverter - feed via cardan shafts - four upper steel feed rollers - one upper rubber outfeed roller - grooved table surface - infeed table length: 1000 mm - automatic central lubrication - feeding table length: 4700 mm - feed speed adjustable via inverter - hydraulic pressure rollers - total feeder power: 2.25 kW - machine dimensions (L/W/H): 790 x 200 x 190 cm - weight: 3200 kg

Condition: like new (used), functionality: fully functional, planing height: 190 mm, spindle diameter: 50 mm, planing width: 250 mm, overall weight: 10,000 kg, Weinig Hydromat H25N four-sided planer with 100 m/min feeder - German production - hydraulic feed up to 100 m/min - for wet wood - serving table TECHNICAL PARAMETERS: planing width 250 mm planing height 190 mm spindle diameter 50 mm electric height adjustment 1 lower spindle 15 kW 2 right spindle 7.5 kW 3 left spindle 15 kW 4 right spindle 7.5 kW 5 upper spindle 7.5 kW Djden Slk Ujpfx Agkecd 6 upper spindle 15 kW 7 lower spindle 7.5 kW 8 universal spindle 1800 7.5 kW feed smoothly adjustable up to 100 m/min feed pump motor power 22 kW nine rollers in the table top, three of which are in front of the first head seven upper steel pulling rollers four upper rubber pulling rollers pneumatic pressure jointer on 1-6-7 spindle automatic lubrication of the countertop feeding table 3000 mm speed smoothly adjustable up to 100 m/min two upper pneumatic rollers six lower pulling rollers minimum material length 650 mm Transport dimensions 11000x2400x2000 mm weight 9 tons

Year of construction: 2008, condition: like new (used), Four-side planer Weinig Powermat 500 - year of production 2008 - German production - PowerCom control - saving profiles with tools and positions - PowerLock tool holder TECHNICAL PARAMETERS: planing width 300 mm planing height 200 mm Dcjdpfx Aeltla Segksd PowerLock tool attachment PowerCom control with positioning of the upper and left spindles 1 spindle 11kW 2 spindle 11 kW 3 spindle 11 kW 4 spindle 15 kW 5 spindle 15 kW milling spindle 1.5 kW 12000 rpm spindle speed 8000 rpm feed continuously adjustable 6-36 m/min feed motor power 4kW five upper steel pulling rollers one rubber upper pulling roller one roller in the top pulling air cushion in the table automatic central table lubrication automatic lubrication of spindle guides length of the feeding table 1970 mm spigot diameter 2x140 mm 3x160 mm 1x80 mm total power 70 kW 140 A Machine dimensions 500x225x242 cm weight 3000 kg

Condition: like new (used), Year of construction: 2004, WEINIG UNIMAT SUPER 4 planer – German production - very good condition – year of production 2004 – DTR TECHNICAL PARAMETERS: planing width 150 mm Dcsdpfx Agsin Nrgjkod planing height 50 mm spindle diameter 40 mm equipped with tools upper adjustable head 1) lower head 11 kW 6000 rpm 2) upper head 18.5 kW 7000 rpm 3) lower head 5.5 kW 6000 rpm feed motor 2.2 kW feed adjustable on the inverter 0-18 m/min feed on cardan shafts pneumatic clamp three upper steel-plated pulling rollers one rubber top roller grooved top pre-top length 1950 mm total power 37 kW central lubrication Transport dimensions: length/width/height 320x220x220 cm weight ~ 2700 kg

Condition: like new (used), Weinig Hydromat H22N four-side planer - German production - DTR - year of production 1992 - two rollers in the tabletop, milled before the first head - for wet wood TECHNICAL PARAMETERS: - planing width 220 mm - planing height 140 mm - spindle diameter 50 mm 1 lower head 7.5 kW 2 legal head 7.5 kW 3 left head 11 kW 4 upper head 7.5 kW 5 lower head 11 kW hydraulic feed pump motor power 15 kW feed speed smoothly adjustable up to 60 m/min feed on cardan shafts electric height adjustment pneumatic pressure five pulling rollers in the countertop eight steel upper pulling rollers one upper rubber pulling roller rests on horizontal spindles jointer on the lower spindles Transport dimensions Dedpfx Aepvi Skegkscd 500x200x160 cm weight 4 tons

Year of construction: 2002, condition: good (used), Weinig Unimat 23 EL four side planer - machine in stock Dcjdpfohhyr Asx Agked - German production - year of production 2002 - DTR TECHNICAL SPECIFICATIONS: - planing width 230 mm - planing height 170 mm - feed adjustable on the inverter 6-26 m / min - spindle diameter 40 mm 1 lower spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 7.5 kW 5 lower spindle 7.5 kW 6 upper spindle 7.5 kW - 4 kW feed motor power - feed on cardan shafts - pneumatic pressure - five top steel rollers - four upper rubber rollers - electric height adjustment - diameter of the stub pipe 140 mm - central lubrication - length of the top 1980 mm Machine dimensions: - length 520 cm - width 210 cm - height 210 cm - weight 4000 kg

Condition: like new (used), Year of construction: 2010, planing height: 200 mm, Weinig Powermat 2000 XL four-sided planer: - German manufacture - DTR CE - automatically controlled - PowerLock heads - year of production 2010 - for wet wood TECHNICAL PARAMETERS: - planer width: 300 mm - planing height: 200 mm - PowerLock heads - control from the touch panel - electronically adjustable heads - pneumatically pressed heads 1 bottom head: 18.5 kW 2 right head: 15 kW 3 left head: 15 kW 4 top head 22 kW with side cutter: 1.5 kW 5 Overhead: 18.5 kW 6 Lower head: 20 kW Dsdsun Natspfx Agkjcd - heads with automatic jointing system - spindles speed: 8000 rpm - inverter-controlled feed speed: 6 - 60 m/min - six steel drawing top rollers - three rubber trailing top rollers - top feed rollers with support - six rollers in the drawing table, of which 2 milled in front of the first head - automatic central lubrication - spigot diameter: 4 x 160 and 2 x 140 mm

Condition: good (used), Year of construction: 2003, functionality: fully functional, spindle diameter: 40 mm, planing width: 230 mm, working height: 120 mm, rotational speed (max.): 6,000 rpm, Equipment: cabin, Types: Profimat 26, Machine no.: 100272, Year of manufacture: 2003, 5-spindle: U-L-R-O-U, Working width: 20-230 mm, Working height: 8-120 mm, with Ahtue Neumann feed unit Dcedpfx Aoyq Ab Regksd

Condition: excellent (used), Year of construction: 2014, WEINIG GRECON HS 120 – FINGER JOINTING LINE Basic information: Model: GRECON DIMTER HS 120 LI Manufacturer: WEINIG (Germany) Type of machine: finger jointing line Year of manufacture: 2014 Year of last upgrade: 2022 (addition of ABB automatic feeding system) Net price: €399,000 A) Specification of the finger jointing line - WEINIG GRECON HS 120 finger jointer (year 2014) with brush feeder for wooden components - Two through-feed milling machines for finger joint profile cutting - Automatic glue applicator with quality control (GlueEye Vision system) - Pre-jointing station for aligning elements - Press for joining, with pressing length approx. 6.1 m (6100 mm) - Integrated ABB robotic line – automatic feeding of the finger jointer - Automatic glue suction from a 1000 l IBC with agitator Robotic loading: - ABB IRB 6640 four-axis robot - Two palletizing cells for continuous operation - Maximum length of elements picked by robot: from 110 to 600 mm - Year of robotic cell construction: 2021 Material handling and discharge: - Roller conveyor system with rotators for feeding battens into robot cell - FAMAD DBNA-40T DUO scissor lift at the press (automatic height adjustment, table size 6.0 x 1.3 m) - Roller storage buffer for batten stacks after joint cutting – storage space 82 liner meters B) Technical parameters Material dimensions and range: - Incoming wood length: 110 – 900 mm - Max material width: 150 mm - Max material thickness: 50 mm - Pressing segment length: approx. 6100 mm - Number of milling stations: 2 - Number of scoring units: 4 Drive and power: - Total connected power: 75 kW - Machine weight: approx. 12,800 kg Space and installation requirements: - Required floor length: approx. 14 m - Required width: approx. 10 m Dsdpfx Agsyk E H Nekjcd Media supply requirements for the line: - Electrical power supply 400 V / 3-phase - Compressed air - Chip and dust extraction - Internet access (control and diagnostics systems) C) Application of the GRECON HS 120 line The GRECON HS 120 line is designed for through-feed finger jointing of short wooden segments into endless slats of up to approx. 6,100 mm in length. Used in the production of: - furniture boards - countertops - structural components - battens and solid wood semi-finished products D) Personnel and number of operators The GRECON HS 120 line with ABB robotic feeding (2 pallet cells, alternating operation) requires only one operator. E) Production process 1. Pallets with pre-sorted wooden elements are delivered to the robot loading cell. 2. The ABB robot picks items from the pallet and loads them onto the belt magazine of the GRECON HS 120 line. 3. The line mills male and female finger joints in a through-feed process. 4. The automatic glue applicator applies adhesive (monitored by the GlueEye Vision system). 5. The pre-jointing station assembles elements to the pre-set length. 6. The cross-cut saw cuts the endless batten to the desired size and feeds it into the press. 7. The press clamps the element until the glue fully sets. 8. Finished slats are placed on the scissor lift, undergo quality control, and are transported to the roller storage buffer.

Condition: excellent (used), Year of construction: 2018, AUTOMATIC WEINIG LINE FOR GLUING AND FORMATTING SOLID WOOD PANELS AND TABLETOPS Net price of the line: 1,099,000 EUR Basic information – line components 1. Automatic loading system Model: IBR 760 Manufacturer: ABB Device type: Four-axis robot – automatic loading for the planer feeder Year of manufacture: 2023 2. Flat chain magazine Model: FEEDER WF 60 Manufacturer: WEINIG (Germany) Device type: Flat chain magazine at the planer Year of manufacture: 2018 Year of upgrade: 2023 3. Moulding and planing machine Model: POWERMAT 2400 Manufacturer: WEINIG (Germany) Device type: Planing and profiling machine Year of manufacture: 2018 Year of upgrade: 2023 4. High-frequency gluing press Model: PROFI PRESS T 5500 HF Manufacturer: WEINIG (Germany) Device type: High-frequency wooden panel gluing press with two HF generators Year of manufacture: 2018 Year of upgrade: 2023 5. Cross-cut saw Model: KT 2234035 Manufacturer: WEINIG (Germany) Device type: Cross-cut saw with transverse conveyor Year of manufacture: 2018 Year of upgrade: 2023 Dcedpfx Agsykzz Noked 6. Longitudinal saw Model: KT 2234979 Manufacturer: WEINIG (Germany) Device type: Lengthwise formatting saw with automatic angle transfer station and powered outfeed roller conveyor Year of manufacture: 2018 Year of upgrade: 2023 A) Line composition and equipment: • ABB IBR 760 robot automatic loading system with loading cell • Automatic system for collecting separators between lamella layers • WEINIG FEEDER WF 60 flat chain magazine • WEINIG POWERMAT 2400 planing and profiling machine • Belt conveyor behind the planer with installed end stop and two ejectors • Automatic glue application station with precision gluing head • Diaphragm vacuum pump for drawing adhesive from 1,000 l IBC tank • High-performance lamella stacking system • Accumulating table with aligning pusher and upper pressure unit • WEINIG PROFI PRESS T 5500 HF press with two high-frequency generators • Mechanized components following PPT 5500 press • Cross-cut saw with transverse conveyor • Lengthwise formatting saw with automatic angle transfer station • Powered outfeed roller conveyor • FAMAD DBNA-40T DUO scissor lift table (6,000 x 1,300 mm) near formatting saw • Roller buffer storage for glued panels – buffer fields: 40 running meters B) Material dimensions and range • Input wood length: 1,200 – 5,500 mm • Material width: 35 – 180 mm • Material thickness: 18 – 45 mm Performance: • ABB Robot: 1,000 mm/s • WEINIG WF 60 magazine: up to 40 cycles/min • POWERMAT 2400 moulder: up to 60 m/min • Press output depends on element dimensions and glue setting time Drive and power consumption • ABB Robot: 7 kW • WEINIG WF 60 Magazine: 1.1 kW • WEINIG POWERMAT 2400: 112 kW • PROFI PRESS T 5500 HF: 140 kW • Cross-cut saw: 13 kW • Lengthwise saw: 13 kW Media requirements • Electricity: 400 V / 3 phase • Chip and dust extraction • Compressed air • Internet C) Line application The WEINIG automatic line is designed for industrial production of solid wood panels and tabletops.

Condition: excellent (used), Number of boring spindles 6 St. Dcodpfxoyiu R Ij Agkod Working width 220 mm Working height 120 mm Length of the planing table 2.000 mm Feed motor 5,5 kW Feed speed 36 m/min. Grooved table Ja Ja

Condition: good (used), Year of construction: 2010, Finger Jointing Line WEINIG NKT Doppel-Pack DP20 Dcsdpfex Ti Rfjx Agkjd An industrial finger jointing system – engineered for maximum precision and efficiency Technical Specifications: Wood infeed length: min. 130 mm | max. 1000 mm Wood outfeed length: min. 3700 mm | max. 7400 mm Wood cross-section: min. 20 x 40 mm | max. 80 x 180 mm Cutter diameter: 370 mm Joint configuration: vertical / horizontal, 10/11 fingers, 3.8 mm pitch Glue application: double-sided, PVAC white glue Connected load: 80 kW Note: The machine is currently dismantled and is in stock at our facility. Viewing can be arranged by appointment. Scope of delivery: WEINIG NKT Doppel-Pack DP20 including control unit Integrated glue station for double-sided application Operating manual & documentation Hydromat 17B (7-spindle) General information Manufacturer: Weinig AG Model: Hydromat 17B // 7-spindle (various tooling) Type: High-performance profiling machine / planer and moulder Year of manufacture: 1989 Operating voltage: 380 V / 50 Hz Spindle arrangement: bottom-right-left-right-left-top-bottom, fixed table Description: Heavy-duty high-performance planer and moulder made from vibration-absorbing and torsion-free cast iron in modular construction. Designed for precise and efficient woodworking at high continuous output. Mechanical feed, adjustable speed from 5 – 35 m/min, feed motor 5.5 kW (7.5 HP). Planer table length 2 m, quick adjustment available. Cutting depth for planing and jointing spindles, each adjustable up to 10 mm. Technical data • Feed speed: 5 – 35 m/min, mechanical • Feed motor: 5.5 kW / 7.5 HP • Operating voltage: 380 V / 50 Hz • Table length: 2000 mm • Cutting depth adjustment range: 10 mm (planing and jointing side) • Machine design: without counter bearing, high-performance model • CNC control: Siemens S5-130 WB, battery-buffered RAM memory

Condition: excellent (used), Year of construction: 2004, Multiblade saw Raimann ProfiRip KR 310 M with HOLTEC ES 121SHKA cross-cut saw and HurricAN extraction system Model: Raimann ProfiRip KR 310 M Year of manufacture: 2004 (refurbished in 2022) Multirip saw with 2 adjustable saw blades Technical details: - Track width: 340 mm - Total feed passage width: max. 950 mm (instead of 800 mm) - Cutting height with/without pressure plate: 115 mm / 130 mm - Workpiece length: minimum 450 mm - Maximum saw blade diameter: 380 mm - Minimum saw blade diameter: 250 mm - Saw blade bore: 80 mm - Saw spindle diameter: 65 mm - Saw spindle speed: 3,900 rpm - Main motor: 30 kW Dsdjymgypspfx Agkecd - Laser alignment lights: 3 units - Operating pressure: 6 bar - Stepless feed speed: 8 - 48 m/min - Feed motor: 1.5 kW - Voltage: 400V / 50Hz

Condition: excellent (used), Year of construction: 2005, We offer a Weinig Super 4 planer in very good condition with EM 15 feed unit, year of manufacture 2005. Djdpfx Ageylagmjkjcd Manufacturer: Weinig Model: Super 4 Year of manufacture: 2005 Condition: very good Type: planer If you have any questions or need further information, please send us a message or contact us by phone.

Condition: excellent (used), planing width 230mm feed on gimbals (7.5 kW) 10 heads: 1 bottom 7,5 kW Dcedsuldn Hepfx Agksd 2 right 7,5 kW 3 left 7,5 kW 4 right 7.5 kW 5 left 7.5 kW 6 top 7.5 kW 7 bottom 7.5 kW 8 top 7.5 kW 9 bottom 7.5 kW 10 universal 4 kW