Used Weinig for sale (474)

Condition: used, Year of construction: 2007, Empty weight: 1 kg Dimensions (LxBxH): 22 x 128 x 167 cm Four-sided planer Weinig Unimat 300 5 axis machine Year of construction 2007 Min/max working height 6/120mm Min/max working width 13/230mm Working speed 6/12 m/min Iedpfx Aowng Uqjb Ija Spindle speed 6000 Rpm Spindle diameter 40mm Input table length 2450mm Engines 1st spindle - Under 5.5kw 2nd/3rd Spindle - Link/Right 11kW 4th Spindle - Above 7.5kW 5th Spindle - Below 5,5kW Dimensions 4500x1300x1500mm (LxWxH), Weight 1500kg - Year: 2007 - Documentation available: No - Transport dimensions: 222mm x 1280mm x 1670mm (l x w x h) - Transport weight [kg]: 1kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fully working UniControl 12 year 2006 from Norway - for exact technical specification please open attached document in PDF below. Cross section UniTec 12: - saw unit - edge round cutter from bottom - Hubspindel no.1 - Hubspindel no.2 - Hubspindel no.3 Long , profile section UniVar 12: - Profil cutter - Profil cutter - Profil cutter horizontal - Profil cutter - Profil cutter - Profil cutter Total el power 114 kw 400 V AC Need for suction 270 m3/min Need of compressed air 1000 L/ minMachine was in use until 15.08.2023 Payment: Prior to loading Delivery: ex. factory Rendalen - Norway Ijdpsmgc I Njfx Ab Ioa Machine is located in Norway ( near to Trondheim) The machine is now disconnected, stored in dry and warm wearhouse, and are ready to be shipped. Rekman Maskin & Service - service of woodworking machines since 1986.

Condition: repair required (used), Year of construction: 2010, functionality: not functional, feed rate X-axis: 120 m/min, input frequency: 50 Hz, For sale is a Weinig mechanization system consisting of: Weinig 811, Weinig 820, Weinig 814, Weinig 811, Weinig 806 Iedpfx Aov Skayjb Iea

Condition: used, functionality: fully functional, For sale: Weinig / Joulin automatic lumber stacking machine. Processed lumber length: 3–6 m. The machine is operational and in good condition. Price: 8,500 EURO. For more information, please contact by phone or email. Isdpfxew I S Uhs Ab Ioa

Condition: excellent (used), Working width: 220 mm Working height: 120 mm Number of spindles: 5 Iedpfx Ajv E H Dnob Ioa Spindle arrangement: bottom / right / left / top / bottom Motors: 7.5 KW, 11 KW, 11 KW, 11 KW, 7.5 KW Table lubrication Feed drive: 2.2 KW Electrically adjustable pressure beam Electrically adjustable left spindle Feed speed: 6/22 m/min Year of production: 1993 Machine dimensions: - Length: 4400 mm - Width: 1700 mm - Height: 1250 mm

Condition: used, Year of construction: 2004, Planer and moulder Weinig Powermat 2000 PowerLock - Technical data Working width 30 - 300 mm Working height 19 - 200 mm First lower tool holder Motor with brake 18.5 KW Speed 8000 rpm Tool flight circle 125 - 180 2nd tool holder First right tool holder Motor with brake 15 KW Tool flight circle 93 - 200 3rd tool holder First left-hand tool holder Motor with brake 15 KW Tool flight circle 93 - 200 mm 4th tool holder First upper tool holder Motor with brake 37 KW Tool flight circle 93 - 200 5th tool holder Second lower tool holder Motor with brake 22 KW PowerLock tool holder Iodpfxsunbrbj Ab Ija Speed 8000 rpm Tool flight circle 93 - 225 Feed system Frequency-controlled feed, infinitely variable 6 - 36 m/min.

Condition: used, Year of construction: 1999, Four-sided planer Little Unimat 23 E Year of construction 1999 Serial number 88103 Feed speed 5/24 m/min Workpiece width min/max 20/230mm Workpiece height min/max 8/160mm Spindle diameter 40mm Input table length 1950mm Groove bed 1st spindle bottom: 5.5kW 2nd & 3rd spindle right & left: 11kW 4th spindle above: 15kW 5. Spindle top: 11kW 6. Spindle bottom: 5.5kW Total power 54kW Total 117Amp. Fuse 125Amp. Transport dimensions: 4200x2000x2100 (LxWxH) weight +/- 4500kg - Year: 1999 - Documentation available: No - Serial number: 88103 - Number of spindles [pcs.]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Isdpfxewnh Sqo Ab Ioa Yorick Diebels

Condition: excellent (used), Weinig H30N four-sided planer Ijdpfx Aeumtlqjb Isa Working width 300mm Working height 200mm Number of spindles 5 Spindle arrangement: Bottom 11kw Right 11kw Left 11kw possibility to change spindle angle up to 90° Right 7.5kw ability to change spindle angle up to 45° Top 11kw Feed speed adjustable with variator up to 22m/min Feed motor 9kw Drive in work table: - 3 rows of grooved drawing rollers in front of the first head - 5 rows of smooth pulling rollers Top drive: - 9 rows of pulling rollers Weight of the machine 6100kg Machine dimensions 470x190x160cmH

Condition: used, functionality: fully functional, spindle diameter: 40 mm, Spindle for thickness planer Iodpfx Abet Uvz Ro Ija

Condition: good (used), Year of construction: 1996, functionality: unexamined, shaft diameter: 50 mm, power: 77.5 kW (105.37 HP), High-performance planing and profiling machines / four-sided planer Manufacturer: Weinig Model: Hydromat 30 / H 30 N System originates from a parquet factory Planing width: approx. 220 mm Planing height: approx. 120 mm Spindle arrangement: Bottom (joiner), 22 kW Right, 7.5 kW Iodpfx Abexr Hbvj Iea Left, 18 kW Top, 30 kW Spindle diameter: 50 mm Feed speed adjustable, 12 – 120 m/min. Voltage: 380 V, 50 Hz

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Weinig Unimat 23 EL Four-Sided Planer (7 Heads) Year of Manufacture: 2005 Technical Condition: Very good Technical Specifications: - Working width: up to 230 mm - Working height: up to 140 mm - Number of spindles: 7 - Spindle arrangement: - Bottom horizontal - Right vertical - Left vertical - Top horizontal - Bottom horizontal - Top horizontal - Bottom horizontal - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm - Feed speed: stepless adjustment, from 5 to 24 m/min - Infeed table length: 1,970 mm Spindle motor power: - Bottom horizontal: 5.5 kW - Right and left vertical: 7.5 kW - Top horizontal: 7.5 kW - Total installed power: 67 kW For an additional fee, installation, commissioning, and training on machine operation are available. We also offer ongoing maintenance services. Iedpfx Aov Nvr Njb Iea

Condition: used, Year of construction: 1996, Weinig Hydromat 23 Technical data Working width 30 - 230 mm Working height 19 - 200 mm Spindle down, right, left, up, down u- re-li-o-u.o without infeed machine only Iedpfxjqrt Ekj Ab Isa Machine is dismantled, immediately available Transport can be organized

Condition: used, Year of construction: 2000, Four-sided planer Weinig Profimat 26 S, 5head Year of construction 2000 min/max Working height 8/120 mm min/max Working width 20/230 mm Working speed 5/24 m/min Spindle speed 6000 rpm Spindle diameter 40mm engines1. Spindle - under 4 kW 2nd/3rd Spindle - left/right 11kW 4. Spindle - above 5.5kW 5. Spindle - under 4 kW Feed motor 3kW Main fuse 63 amp. Dimensions 4500 x 1500 x 1700 mm (L x W x H), weight 2500 kg - Year: 2000 - Documentation available: No - Serial number: 89525 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Iodswnh Ekjpfx Ab Ioa Yorick Diebels

Condition: excellent (used), Weinig Profimat 23 Fortec four-sided planer Working width 230mm Working height 140mm Number of spindles 6 Arrangement of spindles Bottom 7.5kw Right Left 11kw Top 7.5kw Top 5.5kw Iodpfx Ajumxqreb Iea Bottom 5.5kw Pneumatic pressures Feed speed adjustable on variator Drive on cardan shafts CE certificate

Condition: excellent (used), functionality: fully functional, power of feed motor: 11,000 W, Hydraulic feed from Weinig Feed speed 120 m/min Iedpfx Abjv Skbks Ioa Motor power 11 kW

Condition: good (used), Year of construction: 1974, old but stable casting machine Iodpfx Aeturkysb Iea planing width 50 cm table 250 cm long 2 cutterblocks

Condition: used, Year of construction: 2009, max. workpiece length 4500 mm profile spindle 1 Stück main drive 20 kW Control Siemens Weinig Conturex 2 C 114 ----- Working width: 40-260 mm Working height: 25-110 mm 2 x PowerGrip clamp tables, 2 x 2280 mm ----- Workpiece length 200 - 4,500 mm Workpieces over 2,700 mm in length are machined using a repositioning cycle. Main spindle 1: ----- Motor with brake 20 kW HSK 63F Electronically adjustable speed 2,000-18,000 rpm Maximum tool length from flat surface HSK 63 F: 290 mm With C-axis Tool magazine: ----- Number of pockets: 30 mm Pitch between pockets: 100 mm Permanently installed multi-spindle drilling head ----- For horizontal and vertical drilling and milling work without tool changes ----- Price ex-site Prices for disassembly and loading onto customer trucks Transport within Germany and abroad as well as reassembly Commissioning and, if required, new profiles are available upon request! Used tools included (drawings available upon request): ----- Wood: IV 68, 78, 88, opening inside and out, with hinged weatherboard Wood-aluminum: IV 68/68, 78/78, 87/68, 97/78 Lift-and-slide doors IV 68 and 78 Front doors IV 68 and 78 Iodpfowunwyjx Ab Ija Pivot windows Corner connection: counter/dowel Technical specifications according to the manufacturer - no guarantee! Detailed technical description available upon request!

Condition: used, Weinig Unimat 23 Technical data Working width 30 - 230 mm working height 19 - 200 mm Iodsncc Igjpfx Ab Isa elevated on pedestal u- re-li-o-u.o without feeder only machine machine is dismantled, immediately available Transport can be organized

Condition: used, Year of construction: 2002, Dimensions (LxBxH): 160 x 766 x 209 cm Price: On request Four-side moulder Iodpjwng I Defx Ab Ija Weinig Profimat 26 S, 6head Year of construction 2002 Machine number 95514 min/max Working height 8/120 mm min/max Working width 20/230 mm Working speed 5/24 m/min Spindle speed 6000 rpm Spindle diameter 40mm Engines 1. Spindle - under ..kW 2nd/3rd Spindle - left/right .kW 4. Spindle - above 11kW 5. Spindle - above 11kW 5. Spindle - under ..kW Dimensions 3900 x 1800 x 1900 mm (L x W x H), weight 2500 kg - Year: 2002 - Documentation available: No - Transport dimensions: 1600mm x 7668mm x 2090mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Weinig H30N four-sided planer Working width 300mm Working height 200mm Number of spindles 5 Isdpfx Aboumtlko Ija Spindle arrangement: Bottom 11kw Right 11kw Left 11kw possibility to change spindle angle up to 90° Right 7.5kw ability to change spindle angle up to 45° Top 11kw Feed speed adjustable with variator up to 22m/min Feed motor 9kw Drive in work table: - 3 rows of grooved drawing rollers in front of the first head - 5 rows of smooth pulling rollers Top drive: - 9 rows of pulling rollers Weight of the machine 6100kg Machine dimensions 470x190x160cmH

Condition: good (used), Year of construction: 1989, functionality: unexamined, working width: 220 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 220 mm, working height: 120 mm, overall weight: 7,500 kg, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 10, power: 105 kW (142.76 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Hydromat 22 B With grooved bed 10 spindles, Working width: 220 mm, working height: 120 mm, Iodeu Udd Sspfx Ab Isa spindle diameter: 50 mm, Feed rate: 7.5 kW / 8- 40 m/min, Spindle arrangement: 1-bottom (7.5 kW) - with hydraulic clamping 2- Right (7.5 kW) 3-Left (11 kW) 4-Right (7.5 kW)- with straight jointer 5-Left (7.5 kW) 6-Top (15 kW) - with hydraulic clamping 7-Bottom (7.5 kW) - with hydraulic clamping 8-Top (7.5 kW) - with hydraulic clamping and straight jointer 9-bottom (7.5 kW) - with hydraulic clamping and straight jointer 10-Uni (7.5) 6 driven rollers in the table

Condition: used, Number of spindles 5 St. Working width 20 - 230 mm Working height 8 - 120 mm Length of the planing table 2000 mm Feed motor 1,1 kW Feed speed stufenlos regelbar 2 - 12 m/min. 1 WEINIG VARIOMAT planer and moulder including multifunction / slotting table ----- Machine will be cleaned and functionally tested before delivery ! Technical manufacturer's description: ----- Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle horizontal, bottom ----- Motor with brake: 5.5 kW Diameter 40 mm Speed ??6000 rpm Tool radius 125 - 145 mm Axis adjustment range 5 mm Folding device including rebate cutter MarathonCoating for table insert before and after the 1st lower spindle 2nd spindle vertical, right ----- Motor with brake: 11 kW Common motor with left vertical spindle Diameter 40 mm mm Speed ??electronically adjustable 3000 - 6000 rpm (for 11 kW/15 HP) Tool cutting radius for longitudinal machining 93-232 mm Minimum tool diameter at stop plane: 93 mm Maximum tool diameter behind stop plane: 180 mm Maximum throat depth 45 mm Axially adjustable travel 30 mm Insertion segment, including additional stop lip 125 mm Insertion segment, including additional stop lip 150 mm 3rd vertical spindle, left POWERLOCK/HSK ----- Shared motor with 1st right spindle PowerLock tool holder Shared speed with right vertical spindle Tool cutting radius for longitudinal machining 93-232 mm Maximum throat depth 45 mm Minimum throat depth with tool cutting radius 200 mm: 20 mm Axially adjustable travel under table 30 mm Insertion segment 125 mm Insertion segment 150 mm 4th spindle, horizontal, top ----- Motor with brake: 5.5 kW Diameter 40 mm Speed ??6000 rpm Tool cutting radius 125-200 mm Maximum chamfering depth 30 mm Minimum chamfering depth with a tool cutting radius of 200 mm: 20 mm Axially adjustable range 30 mm Glazing bead removal after the upper spindle 5th spindle, second, horizontal, bottom ----- Motor with brake: 4 kW Diameter 40 mm Speed ??6000 rpm Tool cutting radius 125-200 mm Maximum chamfering depth 15 mm Axially adjustable range 10 mm Machine operation ----- Both axes of all spindles - with the exception of the first lower spindle - are equipped with mechanical digital displays. Central radial adjustment with mechanical digital display of the feed rate along with the pressure in front of the upper spindle. The pressure after the upper spindle can be adjusted separately. Memory function ----- For saving the setting values ??of profiles Tool holder axes and pressure elements before and after the upper tool holder with electronic dual displays: Function: -Saving the setting values ??of the finished profile at the touch of a button under a profile number - When the profile number is selected again, the electronic dual displays show the setting values - By manually adjusting the tool holders and pressure elements, the displays are aligned - 99 memory locations Iodpfx Abowugpbj Iea 3 axial CNC-controlled adjustment and positioning of the spindles in conjunction with the memory function. For spindles 2, 3, an...

Year of construction: 2004, condition: excellent (used), Dimter optimization crosscut saw 350 with elevation AH 1400 mm crosscut see picture crosscut saw control cabinet Scanner interface sorting 6500 mm long 3 pushers Waste flap Iodpsncc Icefx Ab Isa Machine is already dismantled and immediately available Machine ran without problems until dismantling Transport can be organized

Condition: excellent (used), Weinig Unimat 23 four-sided planer Working width 230mm Working height 160mm Number of spindles 5 Arrangement of spindles Bottom 5.5kw Right Left 7.5kw Top 11kw Bottom 5.5kw Pneumatic material presses divided into 4 sections Feed speed adjustable by variator 4-24m/min Length of input table 1980mm Drive on cardan shafts Thick soundproof cabin Machine dimensions 380x226x178cmH Iodjtxxwdspfx Ab Ioa CE certificate

Condition: used, Year of construction: 2014, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 600 Compact ----- The machine will be cleaned and completely checked before delivery. Brief Summary: ----- - 5 spindles - Powerful motors - Left and upper spindles controlled for width and height Detailed Description: ----- Technical Specifications: Working width: 20-230 mm Working height: 10-120 mm Number of spindles: 5 1st spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool travel radius: 125-145 mm Tool travel radius for rebate cutter: 130-160 mm Axis adjustment range: 5 mm Rebate device MarathonCoatin for table insert in front of the 1st lower tool holder Electronic digital display for wheel adjustment 2nd spindle - Right ----- Motor with brake: 11.0 kW Shared motor with left-hand tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting radius 40 mm below table level: 93 - 200 mm Tool cutting radius 55 mm below table level: 93 - 180 mm Tool cutting radius for straight cutter heads max. 163 mm Max. tool diameter behind stop level: 180 mm Max. throat depth: 35 mm Axis adjustment range: 55 mm 3rd spindle - left Iedpowzmu Rsfx Ab Iea ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting radius 40 mm below table level: 93 - 200 mm Tool cutting radius 55 mm below table level: 93 - 180 mm Tool cutting circle for straight cutter heads max. 163 mm Max. throat depth: 35 mm Axial adjustment range: 55 mm Radial CNC-controlled spindle 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting circle: 93 - 200 mm Tool cutting circle for straight cutter heads max.: 180 mm Max. throat depth: 35 mm Axial adjustment range: 40 mm Radial CNC-controlled spindle Split pressure shoe in front of the upper tool holder, adjustable to the tool cutting circle and pivoting away from the tool, spring-loaded. Pressure shoe before and discharge after the upper spindle with electronic digital displays, integrated into the memory function. 5th spindle - lower ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting radius: 93 - 200 mm Max. groove depth: 15 mm Axis adjustment range: 35 mm Feed system ----- Electronic feed, continuously adjustable with brake: 4 kW, 5 - 30 m/min Feed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth gauge and self-cleaning. Adjustment range of the feed rollers relative to the left tool holder, axial: 35 mm Machine electrical system ----- Operating voltage 400 V (voltage range 380 - 420 V), 50 Hz. All spindles are IE 2 version. Electrical design according to DIN VDE 0113, electrical equipment for industrial machines EN60204, IEC-204-1. Other electrical regulations are not taken into account. Machine stands, tables, and stops -----...