Used Welding Boom for sale (7,943)

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, input voltage: 380 V, frequency: 50 Hz, Equipment: type plate available, manufacturer: PECO N30 rated power: 40/80 kVa KB 1970 production can weld in 2 directions rather water cooled, air operated Dedpexlr Tdefx Abcscn Kb 32 A can weld 500mm in length voltage: 380v 50 Hz

Condition: ready for operation (used), Year of construction: 1989, machine/vehicle number: D205228, Heinrichsglueck H-36 welding positioner Fully functional. Square table 1050x1050mm. The set includes a remote control with adjustment of table rotation speed and inclination (135 degrees). Dsdpfx Aeuiac Hjbcjcn New power and control cable.

Condition: excellent (used), load capacity: 3,000 kg, table load: 3,000 kg, Equipment: foot remote control, Belgium Welding 3 To 3,000 kg load capacity welding positioner, complete set Horizontal load capacity 3,000 kg, tilted load capacity 3,000 kg Stepless tilt and speed adjustment Very robust construction Speed steplessly adjustable from 0.05 to 0.7 rpm, digital display Turntable diameter: 1,400 mm Dcsdpfx Aoxbhrhjbcon Height horizontal: 1,450 mm, tilted to center: 1,200 mm Length: 2.0 m x Width: 2.0 m Hand-held remote control with digital display and foot remote control

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Dedpfx Aexfrv Ejbcjcn Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean

Condition: good (used), Table size:1500x1500mm Capacity : 6t Dimension: 1600x2500x2000mm Dcodpfx Abjfvqmxscen Hydraulic

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52.693.00, feed length X-axis: 1,525 mm, feed length Y-axis: 1,525 mm, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, welding robot fully equip vertical bend arm robot - with 6 axes - reach: 1525 mm - with automat welding gun, type: DIX MALZ 520 - with wire feed device, manufacturer: FRONIUS, type:ROB.VR1500 DINSE-ZA - with 2 welding working tables (rotary table) Dcedpfjrl S Ufex Abcon - plate dimensions: each 1200 x 750 mm - with pneumatic driven cleaning device - with positioning straightening station for torch - with current source, manufacturer: FRONIUS, type: welding device TPS 4000 - with technical documentation - attention: the machine can be transported on a standard truck Technical attributes dimensions (l x w x h) approx. 4700 x 3500 x 3800 mm weight approx. 5000 kg year of construction 2000

Condition: as good as new (ex-display), JUNE OFFER. FOR THE WHOLE OF JUNE -10% off all welding machines We offer welding machines in a wide variety of configurations and always have several sets in stock. CMT / ROBOT / CMT UNIVERSAL hose packages or HOLLOW SHAFT robots. Everything in stock and available immediately! Don't hesitate to request your customized configuration! Dcsdpfx Ajhzhynebcon We also have a wide variety of spare parts -30% -50% -70% in stock. Just send us a quick email, call us, or WhatsApp us. CMT MACHINES at 1/3 the new price! - 66% DISCOUNT ALL MACHINES CAN BE VIEWED IN VIENNA and PURCHASED WITHOUT WAITING! The prices listed are all starting from ... euros. The prices/offers are created individually according to the device configuration. .) Fronius power source (TPS 4000 CMT) .) Fronius cooling unit (FK 4000) Vufdfi .) Fronius VR CMT wire feeder .) Fronius intermediate hose package .) Fronius trolley .) Fronius hose package CMT robot .) Fronius RCU 5000i Example images of the product. Please see the numerous YouTube videos on the topic of CMT! Also available via WhatsApp and Viber Stocked in Vienna 1230 (Vienna) Shipping on pallets available for an additional charge: Austria approx. 180 euros Germany approx. 230 euros Europe upon request All prices are starting from prices. You can configure the devices with us. Robot device or handheld device. Long connecting hose package or short. Various hose packages to choose from. Synchropuls. 270 400 or 500 amp units in stock. CMT versions available as handheld or robotic. It's best to call us. We'll discuss your application and give you an initial price estimate.

Condition: new, Year of construction: 2025, Laser welding machine with 3 kW laser power, laser components from Siemens - welding machine with genuine CE and therefore also German manual, risk analysis and everything that is required to be able to operate a laser welding system in Germany. Wire feed case, also with genuine CE, is also included in the delivery. An introduction can take place here in the company. Dedpfxsn Sl D Ro Abcscn

Condition: like new (used), Year of construction: 2018, Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA HP20RD.(Payload: 20kg, H-Reach: 2017mm, Robot Mass: 293kg, 2010.04) 1 x YASKAWA DX100 controller.(2010.05). 1 x IPG YLS-4000.(2017). Dodpfx Ajh Ad E Usbcjcn 1 x IPG CHILLER.(2017). 1 x HIGHYAG BIMO LASER WELDING HEAD(S.N.:BIMO2W17013). Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: used, This is an LSQ5X welding power source from SKS Welding Systems, together with a Weld Process Controller MULTIPROCESS - Q80 and an SKS Frontpull 8 (23°) Dedjuxbx Dspfx Abcscn

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 21_0346, NEW - NEVER USED heavy-duty positioner for manual or robotic welding - lifting and turning device. Special Device for Special Tasks designed and produced by FÖRSTER welding systems GmbH. Max diameter of the workpiece: 2500 mm Max weight of the workpiece: 20 tons Dimensions of the welding positioner: 7000x3000x3750 mm Weight [without counterweigh]: 20 000 kg Overall dimensions of the whole system: 8900x4800x3750 mm Total weight of the whole system: 40 000 kg Counterweight included with the machine. Full documentation available. Dcodourlcrspfx Abcjn Manufacturer's technical support on request. Machine located in central Poland.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Friction welding machine from MTI, equipped for welding turbochargers. The machine is equipped with: - Siemens PLC, CPU 315 - Rexroth hydraulics Dcedpfx Absv Uzf Eecen - German user interface - CE Upon request, this machine can also be converted for many other welding tasks.

Condition: as good as new (ex-display), Fronius TPS 4000 CMT ✅ Scope of delivery: ➤Fronius TPS 4000 CMT power source ➤Fronius FK 4000 ➤Fronius VR 7000 CMT wire feeder ➤Fronius Robacta CMT hose package or CMT hand hose package ➤Fronius intermediate hose package ~1.5m ➤Fronius RCU 5000i ➤Fronius Interbus Rugged Line interface ➤Ground cable 3-4m ➤Pressure regulator from Messer (new) The prices listed start at ... euros. Prices/offers are customized based on the device configuration. CMT (Cold Metal Transfer) technology is particularly known for its high precision and flexibility when welding thin materials and delicate components. Unlike traditional MIG/MAG welding processes, CMT uses a controlled, pulsating wire feed, which transfers the welding wire very precisely into the weld pool. This minimizes spatter, enables excellent heat input control, and reduces distortion and discoloration of the material. We always have several machines in stock in different versions. Ask for a personalized configuration / additional options. ---- AVAILABLE FOR IMMEDIATE DELIVERY PROPER INVOICE A viewing is possible in Vienna, Austria! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the machines? ►►► To explain, we buy like-new used devices, disassemble them, inspect everything, replace any worn parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when you purchase from us? Yes, you receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. Dcjdewbixrepfx Abcon ►►►What payment options are available? Prepayment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set, well packaged and insured, on a Euro pallet. ►►► ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately don't have the flexibility to offer a warranty. You are welcome to test the devices on-site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: new, Year of construction: 2025, Laser welding machine with 3 kW laser power, laser components from Siemens - welding machine with genuine CE and therefore also German manual, risk analysis and everything that is required to be able to operate a laser welding system in Germany. Wire feed case, also with genuine CE, is also included in the delivery. An introduction can take place here in the company. Dsdpfx Aswzv D Iebcscn

Condition: new, Year of construction: 2024, operating hours: 2 h, workpiece weight (max.): 1,000 kg, pipe diameter: 800 mm, The system consists of two units, one driven and the other idle. There are four wheels in total, two in each unit (drive and idler). The wheels are driven by heat-treated gears with high wear resistance. Model: 2k-TR-1 Load capacity: 1000 kg Workpiece diameter: 20-800 mm Roller diameter: Ø200 mm Roller width: Ø50 mm Rotation speed: 80-600 mm / min Dodpfx Aowl Enkjbcecn Connection voltage: 230 V, 1 phase 50 Hz Weight: 54 kg Control: Handheld control unit Control functions: Forward/Reverse/ Speed control/Non-stop IP65 Version: 1x drive unit with 1x idler and control cabinet incl. all functions and foot switch

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 5668430QC5A, travel distance X-axis: 10,000 mm, torque: 4,000 Nm, TECHNICAL DETAILS Travel path X-axis: 10,000 mm Moment of inertia: 200 kg/m² Torque: 4,000 Nm Swivel moment: 10,000 Nm Clamping plate size: approx. 1,000 x 1,200 mm MACHINE DETAILS Power (welding wire feeder): 4 kW Power (Cloos QIROX-C QRC350): 40 kVA EQUIPMENT 2 welding positioners (left/right), Type: WPEK-25000N Rotary unit Welding robot, make: Cloos-Bauer, Type: BPF4001/2/4 Welding wire feeder, make: ESAP Extraction unit Rail-guided Dcjdpfxsxgqy Es Abcjn Separate welding units, make: Cloos, Type: GLC603 Quinto Separate control unit Corrugated sheet metal enclosure with 2 sliding doors

Condition: good (used), fuel type: diesel, color: orange, Year of construction: 2019, operating hours: 19,960 h, Equipment: air conditioning, Technical information Track width: 70 cm Empty weight: 114.000 kg Make of engine: QSK 23 Condition Technical condition: good Visual appearance: good Identification Dodpow Sglisfx Abcscn VIN: T4326 / E632 Serial number: HCM18J00H00001911 Other information Emission level: Stage II / Tier II Delivery terms: EXW Transport dimensions (LxWxH): 7,2x3,59x3,54 Production country: JP Additional information Please contact Antonio Francisco Pinto, Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information * Comes with new boom 7.55mm and new Stick 3.4mm *Without bucket

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: WG002553, Make/model: MCWEL M630 Rated DC output: 26.4kW Rated current: 550A Voltage: 20 – 45V Dcedpfjvznbyjx Abcjn Current range: 55 – 550A Rated duty cycle: 60% Applicable electrode: 1.6 – 8.0mm Engine model: F3L912 Rate output: 28kW /1800rpm, 60Hz Cooling system: air-cooled environment conditions Dimension: L – 1,525mm x W – 760mm x H – 1,050mm Weight: 900kg

Condition: like new (used), Year of construction: 2023, operating hours: 250 h, functionality: fully functional, Tig welding/cladding machine, CNC control, automatic control, 5-axis simultaneous movement. Fronius units, table from 1.5meters, vertical & horizontal Pre-Set Programmable, easy operation control panel. Friendly interface. Overlay welding for Ball, Valve, Flange face, RTJ groove, Bevel etc. One touch, More Welding Solutions, New stocks for sale!! Dodjvl Ewmepfx Abcjcn

Condition: used, Year of construction: 2017, operating hours: 406 h, 2017 | Genie TZ34 (12m) | Used Trailer-Mounted Boom Lift | 406 hours 📍Location: Latvia, Rīga 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Djdpfx Aoxllxtebcecn 💰 Buy Now for EUR 13900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 26 inspection points 26 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine is quite rusty, but everything works as it should 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38133 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 1999, Welding robot year of construction:1999 Manufacturer: ABB Model controller: IRB2400 M98 Type of robot: IRB 2400L Controller: M2000 S4CPlus. Number of axes: 6 Maximum load of the robot: 7 kg Maximum reach: 1800mm. Robot movement speed: Axis 1: 150º/s Axis 2: 150º/s Axis 3: 150º/s Axis 4: 360º/s Axis 5: 360º/s Dedpfxsihvy Uo Abcscn Axis 6: 450º/s

Condition: ready for operation (used), Welding positioner, turning table, rotary work table, used machine Manufacturer: Heinrichsglück Type: TB 10 E Overall dimensions: Width: 2300 mm Dcedsxk Rt Tjpfx Abcon Depth: 3100 mm Height: 2500 mm Weight: 10,000 kg Year of manufacture: 1984 Table size: 1800 mm Load capacity: 10 tons

Condition: reconditioned (used), Year of construction: 1994, functionality: fully functional, Model: BAS 100. Flash Butt welding Machine for Band Saw Blades. Hydraulic clamping. Annealing pyrometer. Hydraulic weld de-burring tool. Blade positioning device. Year of manufacture: 1994. Automatic annealing temperature control. Welding strip up to 100 mm. Bimetal strip up to 80 mm. Connection: 400 V. Weight: 500 kg. Dimensions (W*D*H): 1400*900*1500 mm. Dedpfxow Snqms Abcscn Operating instructions and packing included.

Condition: used, Year of construction: 2017, operating hours: 921 h, 2017 | Genie TZ-50 DC w/ Drive 17.09 m | Used Trailer-Mounted Boom Lift | 921 hours 📍Location: Latvia, Rīga 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 17900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 23 inspection points 23 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Djdpfx Abjxizvcococn Considering the age of the machin everything works as it should 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38151 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2018, operating hours: 280 h, 2018 | Genie TZ34 (12m) | Used Trailer-Mounted Boom Lift | 280 hours 📍Location: Latvia, Rīga 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 16000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 33 inspection points 33 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good operating , play on basket 📄 Want to see the full inspection, extra photos, or a video? Djdpfxexf Rgco Abcscn Tip: The reference "38143 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.