Used Welding Other for sale (25,955)

Condition: new, Year of construction: 2024, load capacity: 300 kg, Welding rotary table KT 300 Horizontal load capacity: 300 kg, tilted: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Tsdpfx Aec Ug Tleired Height: 500 mm Tilting range: continuously adjustable via crank gear motor, 0 - 90° Speed: 0.3 to 2.5 RPM Includes foot pedal remote control Optional extra: Quick-release chuck Diameter: 300 mm, €450

Condition: as good as new (ex-display), Protec KT 3000 HV, hydraulically adjustable in height Load capacity: 3000 kg Tedpofxpggefx Airsd Handheld remote control with digital display Dual-pedal remote control Height: approx. min. 700 mm when tilted to the center, max. 1400 mm Diameter of the turntable: 1400 mm Tilt angle: min. 135° Speed: 0.05 to 0.9 rpm Motor power: 3 kW

Year of construction: 2022, condition: new, 3000 kg load capacity, welding rotary table, very robust Speed continuously adjustable from 0.05 to 0.7 revolutions per minute Rotary table diameter 1400 mm Tilting up to 120° Height in horizontal position 1300 mm, tilted to center 1050 mm Length 2.0 m x width 1.4 m Handheld remote control with digital display Tjdpfx Asfxphljirjd and foot-operated remote control

Condition: new, Year of construction: 2024, Protec KT 5000 welding rotator table Complete set including dual foot pedal control and hand-held control with digital display 5000 kg load capacity Diameter of clamping plate: 1500 mm Height in horizontal position: 1500 mm Height in tilted position (to center): 1500 mm Speed continuously adjustable from 0.01 to approx. 0.7 RPM Tilt up to 120° Length: 2100 mm Width: 1500 mm Tsdpjfkt Ebjfx Airod

Condition: as good as new (ex-display), Year of construction: 2022, Protec KT 3000 HV, hydraulically adjustable in height Load capacity: 3000 kg Handheld remote control with digital display Dual-pedal remote control Height: approx. min. 700 mm when tilted to the center, max. 1400 mm Diameter of the turntable: 1400 mm Tilt angle: min. 135° Todpfx Aiefky Iqsrsd Speed: 0.05 to 0.9 rpm Motor power: 3 kW

Condition: new, Year of construction: 2020, 3000 kg load capacity, welding rotary table, very robust Speed continuously adjustable from 0.05 to 0.7 revolutions per minute Rotary table diameter 1400 mm Tilting up to 120° Height in horizontal position 1300 mm, tilted to center 1050 mm Length 2.0 m x width 1.4 m Handheld remote control with digital display Tjdpfx Aisfv Huusrsd and foot-operated remote control

Year of construction: 2020, condition: as good as new (ex-display), Protec KT 3000 HV, hydraulically adjustable in height Tsdpfx Aijf Ezc Asrjd Load capacity: 3000 kg Handheld remote control with digital display Dual-foot remote control Height: approx. min. 700 mm horizontally, max. 1400 mm Diameter of turntable: 1400 mm Tilting angle: min. 135° Speed: 0.05 to 0.6 RPM Motor power: 3 kW

Condition: new, Year of construction: 2025, 1000 kg load capacity, height-adjustable welding positioner with through-hole, 200 mm Plate diameter: 900 mm Horizontal height: min. 0.8 m, max. 1.6 m Tilted height: min. 0.6 m, max. 1.4 m Speed: 0.1 - 1.2 RPM Tedpef Ezdcofx Airsd Length: 2000 mm Width: 1000 mm Tilt angle: up to 135° Handheld and dual-foot remote control with speed display Very robust

Condition: excellent (used), Welding positioner, Focker Strähler, 8 tons 8000 kg load capacity with hand and foot remote control Speed and inclination continuously adjustable 0.02 rpm to 1.1 rpm Tsdpef Ezdnsfx Airsd Diameter 1500 mm Height to center when tilted 1170 mm Height in horizontal position 1400 mm Length 2400 mm Width 1500 mm Condition: visually and technically flawless, runs very quietly.

Year of construction: 2022, condition: new, 3000 kg welding rotator, hydraulically adjustable in height Speed: 0.05 to 0.8 revolutions per minute Very robust, complete set with hand-held and dual-foot remote control Table diameter: 1200 mm Tilt: 0 to 120° Total height adjustment: approximately 700 mm Height adjustment with the disc in a vertical position to the center: 960 mm to 1910 mm Dimensions with the disc in a horizontal position: 1200 mm to 1900 mm We offer the rotary tables with capacities of 600 kg, 1000 kg, 3000 kg, and 5000 kg. Tjdsff Ngijpfx Airjd

Condition: excellent (used), functionality: fully functional, load capacity: 3,500 kg, 3-axis ESAB welding positioner, 3500 kg load capacity in very good condition complete with accessories, including foot and hand-held remote control Clamping plate diameter 1100 mm Tedozk Rbdopfx Airsd

Condition: like new (used), functionality: fully functional, load capacity: 1,000 kg, Equipment: documentation/manual, Lifting, rotating 360°, swiveling 360°, also overhead operation Severt L manipulator, 4 units, lifting capacity of 1000 kg and 2000 kg, price per unit PRODUCT TYPE S10 Tsdozk Rdxepfx Airsd TYPE CODE S10.1-1HH 1000 kg / 2000 kg LIFTING CAPACITY (KG) 1000 / 2000 kg LIFT (MM) 1000 ARM LENGTH (MM) 1500 / 2000 Torque CLAMPING PLATE (NM) 1400 BENDING MOMENT SUPPORT ARM (NM) 3000 FREQUENCY CONVERTER yes LIFT DRIVE hydraulic SELF-WEIGHT (KG) 1700 All machines come with documentation and operating instructions. Price per unit.

Condition: like new (used), Year of construction: 2014, type of input current: three-phase, total width: 1,200 mm, total length: 1,600 mm, total height: 3,850 mm, filter area: 120 m², suction capacity: 7,200 m³/h, Dust extraction unit, fume extraction unit, self-cleaning filter from the renowned NEDERMAN brand. The FilterMax DX, designed by Nederman, is a modular filtration system capable of serving extraction points throughout the entire production hall. The FilterMax DX is designed to operate with dry dust that may pose an explosion hazard. The unit is equipped with a reinforced, double-grounded housing with a panel designed to withstand extreme loads that occur during an explosion. The unit is like new – it has never been used (stock surplus). Brand: Nederman Model: FilterMax DX 6000 TR Year of manufacture: 2014 Designation: EX II 1/3 D T=125°C Capacity: 7200 m3/h Filtration area: 120 m2 Filter cartridges: 12 pcs Fan power: 11 kW Inlet diameter: 300 mm ATEX panel to relieve explosion pressure ATEX check valve Unit dimensions: Width: 1.20 m x 1.60 m Height: 3.85 m Base: 1.10 m x 1.40 m Tedpfxjzf Hn Ao Airod Stock number: 0008

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, inverter welding machine -Manufacturer: Ess, MIG/MAG gas-shielded welding machine -Type: E1-3300 -Max. welding current: 330 A Tedpfx Aozrt E Uoired -Features: Water-cooled, remote control -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 1020/520/H980 mm -Weight: 116 kg

Condition: good (used), functionality: fully functional, load capacity: 7,500 kg, Welding rotary table, Tehag, 7500 kg load capacity Very robust Condition: very good Diameter: 1500 mm Tedpfxszfpmhs Airod Height in horizontal position: 1150 mm Height in tilted position (to center): 950 mm Variable speed: 0.01 - 1.5 rpm Tilt: max. 135°, infinitely adjustable Length: 2.6 m Width: 1.4 m Handheld and foot-operated remote control

Condition: new, mileage: 500 km, power: 265 kW (360.30 HP), overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, loading space width: 2,450 mm, loading space length: 4,200 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, New municipal vehicle, MAN TGS 18.360 BL 4x4 all-wheel drive tipper truck with Meiller tipper body. Winter service equipment with municipal hydraulics and front mounting plate. New loading crane, Palfinger PK 9.501 SLD with hydraulic 4-section extension, radio remote control, and swivel head and grapple system with 5 + 6 control circuits. Full MAN manufacturer's warranty from the date of initial registration for 24 months up to 100,000 km. Truck specifications: 18,000 kg permissible gross weight 22,000 kg technically permissible gross weight 23,000 kg technically permissible gross weight plus option 9,000 kg permissible front axle load 10,000 kg technically permissible front axle load plus option, increased load capacity on front axle for winter service at max. 62 km/h (including tires up to 15%) 11,500 kg permissible rear axle load 13,000 kg technically permissible rear axle load Dual-circuit municipal hydraulic system Front mounting plate, size F1 Winter service lighting Heated front windshield TGS NN medium-length cab with rear window Wheelbase 3,900 mm Engine Euro 6 e Drive 4x4 Front axle as outer planetary axle, driven, switchable Differential lock in front and rear axle Meiller Trigenius D212 3-sided tipper for loading crane approx. 4.20 m x 2.45 m x 0.60 m high Front wall 0.80 m high Side walls, M-Jet, steel HBW 450, 2.5 mm Tipper bed made of steel HBW 450, 4 mm Load securing with floor and side wall lashing points Tipper side walls, pivoting and foldable Tipper rear wall, pivoting and foldable, with pneumatic claw locking Transfer gearbox MAN G172 with on-road and off-road mode MAN TipMatic 12.26 OD Transmission function MAN Idle Speed Driving Transmission function Rocking mode Driving program MAN TipMatic Performance up to 70,000 kg Driving program MAN TipMatic Efficiency, up to 70,000 kg Driving program MAN TipMatic Offroad, up to 70,000 kg Driving program MAN TipMatic Manoeuvre, maneuvering mode Air conditioning, Climatronic Auxiliary heater, 4 kW Trailer hitch, Rockinger Type 400 G 150A with compressed air connections Tipper hydraulic connection at the rear Front axle leaf-sprung and rear axle air-sprung Front axle 9,000 kg, AP axle Rear axle HP-1352, 13,000 kg, AP axle Stabilizer for front and rear axle Hill start assist MAN EasyStart TPM tire pressure monitoring system with tire temperature display Tire pressure indicator for trailer Preparation for alcohol interlock system Driver attention warning system MAN AttentionGuard Full brake assist system EBA Plus emergency brake assist system Lane departure warning system LDW LCS lane change assist and turning assist MAN Front Detection Distance warning Traffic sign recognition EBS ASR ES Cruise control High-performance engine brake MAN EVBec, adjustable 310 liter aluminum tank on the left Sun visor 2 rotating beacons and 2 work lights Compressed air connection in the cab with compressed air hose and gun Cool box in the cab Rear view camera MAN Reversing Motion System Tedpfx Aozthuasirod Reversing warning, audible, can be switched off when reversing gear is engaged Multi-function steering wheel MAN EasyControl Engine control panel, 2 functions can be operated from outside when the door is open Electrically adjustable and heated exterior mirrors MAN Media System Advanced 7 inch MAN Sound System Advanced Smartphone integration Preparation for radio with CB radio antenna on the cab roof 24 Volt battery management system Driver and passenger comfort seats, air-sprung with lumbar support, shoulder a

Condition: used, Year of construction: 2008, Demolition and sorting grab, rotatable, manufacturer Liebherr, fully functional Tsdpfx Aisyii Dyored

Condition: used, Equipment: type plate available, Powerful TIG Welding Unit for Professionals The EWM TIG 350 DC FWD is a high-quality, water-cooled DC TIG welding unit from EWM, engineered for demanding applications in metal construction, industry, and professional workshop environments. This high-performance machine enables precise DC TIG welding with up to 350 A welding current and offers superior arc stability, high weld quality, and efficient cooling – ideal for steel, stainless steel, nickel alloys, copper materials, and other metal workpieces. 🔧 Welding Performance and Technology Direct current TIG welding (DC) with an adjustable range up to approximately 350 A – powerful penetration and precise control. Robust inverter electronics ensure stable arc performance and high efficiency. The water-cooled design allows continuous operation even under heavy-duty conditions. ⚙️ Features and Operator Comfort Proven operation with an intuitive control panel – easy adjustment of welding parameters. Connection options for remote control and torch functions for added convenience. Splash-proof housing rated to IP23, suitable for tough workshop environments. Energy-efficient operation thanks to high efficiency and standby function. Tedpfx Aoyililjirod Dimensions: 1000 x 520 x 900 mm Weight: approx. 180kg All information subject to change or errors.

Year of construction: 1996, condition: excellent (used), Welding rotary table Hamacher 500 KK, load capacity Speed continuously adjustable from 0.01 to approximately 2.0 RPM Height (horizontal) 800 mm, width 800 mm, length 1550 mm Diameter of the clamping disc 800 mm Tjdpohadtujfx Airjd

Condition: used, functionality: fully functional, color: orange, empty load weight: 840 kg, machine/vehicle number: 3613, We are selling a snowplow made by Schmidt, with a blade width of 3.0 m. The following data is provided according to the nameplate: Type: MF Weight: 840 kg Tjdpfx Aeiv U Dxoirsd Currently, no scraper blade is attached, but it can be added for an additional charge if required. Otherwise, the snowplow is in good condition and ready for use.

Condition: new, Year of construction: 2024, 600 kg load capacity Welding rotary table, height-adjustable with through-hole, 100 mm Plate diameter 700 mm Height in horizontal position, min. 0.65 m, max. 1.25 m Height in tilted position, min. 0.45 m, max. 0.95 m Speed range from 0.01 - 1.3 RPM Tilting angle up to 135° Hand and foot remote control with speed indicator Tjdog Tdpgspfx Aired very robust

Condition: used, mileage: 23,876 km, power: 80 kW (108.77 HP), first registration: 12/2001, overall weight: 3,500 kg, fuel type: diesel, color: red, gearing type: automatic, emission class: euro3, loading space width: 1,720 mm, loading space length: 3,450 mm, loading space height: 1,840 mm, total length: 5,780 mm, total width: 1,930 mm, total height: 2,630 mm, number of seats: 3, Equipment: ABS, electronic stability program (ESP), parking heater, Sprinter 311 CDI in like-new condition with Sprintshift automated manual transmission, previously used as a measurement vehicle (GW-Mess) by a German professional fire department. +++ Only 23,876 km original mileage +++ Immediately operational +++ Like new +++ Runs perfectly Tsdsyrwmqepfx Airjd Equipped with auxiliary air heater and 3 registered seats, the passenger seat is rotatable, and features a side-mounted Omnistor 4000 awning. The cargo area is very clean and fitted with 2 Sortimo shelving units, overhead cabinets, and a workspace with a third seat from Sportscraft including a three-point seatbelt. Body built by "Esser": Special signaling system with integrated tone sequence, front strobes, Nissen rear beacon, rear roof-mounted blinker, perimeter lighting, premium interior lighting, and a 220V external power connection, all fully functional. Includes a small inverter and various mounting brackets, which are present but have not yet been tested. Contour markings on the sides and rear made of yellow REFLEX strips. ABS, 2 airbags, central locking, electric mirrors, CD radio, auxiliary (air) heating, second battery, sliding door with sliding window, rear doors with 270° opening angle, robust rear step, and quality Falken all-season tires with Alpine snowflake marking from DOT 2021, all around with 9.0 mm tread depth. Exceptionally well-maintained and looking almost new—no rust found during inspection, underbody very clean and original. Engine runs perfectly, transmission shifts smoothly, and the auxiliary air heater is working. Internal cargo area dimensions behind the front seats: 3450 x 1720 x 1840 mm (L x W x H) +++ Ideal platform for a reliable camper conversion +++ +++ Subject to errors, changes, and prior sale +++

Condition: new, Year of construction: 2026, load capacity: 10,000 kg, Column lifting and rotating device, 10 tons lifting capacity, available as a set or individually. Driven on 2 sides. The machine is offered as a set for synchronous operation or individually. Todpowtq Dtefx Aired Protec rotating device / positioner Syncrolift. Double column, hand-held remote control, wireless and manual. Column adjustment, 2x electrically adjustable (at extra cost). Lifting capacity 10,000 kg, 360°. Minimum working height: 800 mm. Maximum working height: 1700 mm. Speed: 0.5 RPM. Diameter of clamping plate: 900 mm. Rotating movement: 2 x 2.2 kW. Torque: 18950 Nm. The machine is also offered individually as a mono model (more affordable). Optional with a universal joint flange (cardan flange).

Condition: excellent (used), load capacity: 250 kg, Equipment: foot remote control, 250 kg load capacity welding positioner, 2 identical units available with 380mm or 400mm chuck, top condition electrically tiltable very robust Continuously variable speed from 0.15 to 2.0 rpm Current transmission 300 A Turntable diameter approx. 500mm Tilting up to 135° Height (horizontal) approx. 900mm, tilted to center approx. 800mm Tsdpfx Aswtrtcsirod Length 950 mm x width 600 mm

Condition: excellent (used), functionality: fully functional, load capacity: 650 kg, Equipment: foot remote control, Tilting rotary table with 650 kg load capacity, foot remote control Faceplate diameter: 850 mm Rotational speed: 0.01–2.0 rpm Mass coupling: 300A Optionally available with 3-jaw chuck Tilted height: 900 mm minus 120 mm Tedewtrumepfx Aired Horizontal height: 950 mm minus 120 mm