Welding turn table

Protec KT 300 OH

Condition: as good as new (ex-display), Year of construction: 2023, Container rotating device, 10-ton lifting capacity Speed: continuously adjustable Hand and foot remote control Bwodod Nmx Topfx Aaxsw Diameter: 320mm to 2800mm Roller diameter: 300mm Speed: 6 - 60 m/h Power: 2 x 0.55 kW

Condition: new, Tubend hydraulic profile ring bending machine HPK 50 3 driven rollers Digital display Incl. standard roller set steel Hydraulic / motorized ring bending machine Can be used horizontally and vertically with 3 driven rollers 3 motor-driven rollers Hydraulic infeed of the top roller Hydraulic: 8 tons Rollers are hardened Bwedpfsum R U Aox Aaxjw Left/right rotation via foot pedal Mounting: shaft 50 mm Roller Ø 162 mm Speed: 4.5 m/min Motor power: 1.1 kW Electrical connection 400 V According to CE standard Weight 510 kg L.W.H. 810 x 950 x 1500mm Power table see PDF file

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, DMU90P duoBLOCK Operating hours: 52,700 h Operating hours: 22,700 h Immediately Available! Control: HDH iTNC640 Travel: X-900 mm, Y-1050 mm, Z-850 mm clamping surface: 900 x 700 mm max. table load: 1.800 kg Spindle mount: SK50 Spindle speed: 12,000 rpm tool magazine: 60 seats Bodpfx Aao Aa Ayuexoww Internal coolant supply (IKZ) and chip removal package: 40 bar Tool measurement: BLUM Laser probe: Heidenhain electric handwheel: Yes

Condition: new, Year of construction: 2025, Protec Welding Turntable, 5000 kg load capacity Variable speed control, 0.05 - 0.5 RPM Handheld remote control Bwodjid Szcspfx Aaxow Height: 600 mm Diameter: 1500 mm Foot pedal remote control available at an additional cost.

Year of construction: 2018, condition: as good as new (ex-display), Welding rotary table KT 50 Load capacity, horizontal: 50 kg, tilted: 25 kg Power supply: 220 V, 50 Hz Table diameter: 320 mm Table height: 400 mm, tilted to center: 300 mm Length: 650 mm, width: 650 mm Bjdpfxod A Etye Aaxjww Tilting range, continuously adjustable via crank drive motor: 0 – 90° Speed: 1.7 – 15 rpm Includes foot-operated remote control

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Bwsdpjuz If Nofx Aaxow Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: used, Year of construction: 1969, turning diameter over bed 500-600 mm turning length 2800 mm bore diameter 130 mm weight of the machine ca. 5,25 t Bwedpsvdx I Asfx Aaxew required space / m

Condition: new, weight max. 10 t workpiece diameter 100 - 3200 mm drum diameter 300 x 120 mm feed 100 - 1000 mm/min total power requirement 2 x 0,55 kW Bjdpfjf Ep Disx Aaxsww

Condition: new, Year of construction: 2026, Container rotating device, welding table, welding rotary table, roller stand 1000 kg load capacity Distance and rollers adjustable Bwjdpfx Aaogu Edvsxsw with foot-operated remote control Speed continuously adjustable from 80 to 1600 mm/min. Diameter 20 mm to 700 mm.

Condition: new, functionality: fully functional, load capacity: 300 kg, Equipment: foot remote control, Welding positioner Protec KT 300 H, 170/400 special version with hydraulic height adjustment and safety lock against lowering. Hydraulic platform load capacity 500 kg. Horizontal load 300 kg, tilted load 150 kg. Power supply 220 V, 50 Hz. Table diameter 450 mm, hollow shaft diameter 170 mm, table height 500 mm. Welding current transmission 400 A. Quick-acting chuck diameter 300 mm, surcharge €550. Quick-acting chuck diameter 400 mm, surcharge €750. Mobile hydraulic height adjustment, surcharge €650 (with lockable castors). Counter-support yellow, stepless height adjustment €250. Crank drive motor, 0-90° stepless adjustment. Speed stepless from 0.01 up to approx. 5 rpm. Incl. foot remote control. Digital display with welding time limitation available on request. Bwsdpfx Aewz Rfgoaxew