Used Welding Rotator for sale (12,596)

Year of construction: 2015, condition: ready for operation (used), A welding turning device Jucat, consisting of two parts with the workpiece in the middle, is available. Design: 2-column system, max. load capacity: 6000kg, rotation torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. rotational speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible. Kdedoyrg H Hjpfx Ahhsr

Year of construction: 2014, condition: ready for operation (used), A welding turning device Jucat consisting of two parts with the workpiece in the middle is available. Design: 2-column system, max. load capacity: 6000kg, rotational torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible. Kodpfx Aheyrg Hyshsdr

Year of construction: 2025, operating hours: 300 h, condition: like new (used), Equipment: CE marking, TECHNICAL DETAILS: Drive Unit: Model: VM800T. Maximum load capacity: 400 t. Turning capacity: 800 t. Maximum speed: 108 cm/min. Minimum speed: 20 cm/min. Maximum diameter: 8,000 mm. Minimum diameter: 2,500 mm. Length: 6,360 mm. Width: 1,544 mm. Height: 1,565 mm. Weight: 15,300 kg. Diameter range: As per drawing, 2,500 ÷ 8,000 between 61º and 54º. Wheels: Steel, Ø 950 x 350 mm. Power: 2 motors of 7.5 kW with primary epicyclic gearboxes and secondary worm gearbox. Idler Unit: Model: VC800T. Maximum load capacity: 400 t. Maximum diameter: 8,000 mm. Kdodpoy Ex D Sefx Ahher Minimum diameter: 2,500 mm. Length: 5,852 mm. Width: 1,500 mm. Height: 1,565 mm. Weight: 12,720 kg. Diameter range: As per drawing, 2,500 ÷ 8,000 between 61º and 54º. Wheels: Steel, Ø 950 x 350 mm.

Condition: good (used), Year of construction: 1980, Offer 24518 Kdjdpjvtnyyofx Ahher Technical data: - Load capacity 150 kg - Cross supports + mounting bolts - Height of mounting bolt in horizontal position 1350 mm - Diameter of mounting bolt 55 mm - Rotation continuously adjustable - Right-hand and left-hand rotation - Drive 400 V / 3.0 kW - Height of mounting bolt in horizontal position 1350 mm - Space requirement approx. W 600 x D 1200 x H 1350 mm - Weight approx. 150 kg .

Condition: new, Year of construction: 2026, load capacity: 10,000 kg, Column lifting and rotating device, 10 tons lifting capacity, available as a set or individually. Driven on 2 sides. The machine is offered as a set for synchronous operation or individually. Protec rotating device / positioner Syncrolift. Double column, hand-held remote control, wireless and manual. Column adjustment, 2x electrically adjustable (at extra cost). Lifting capacity 10,000 kg, 360°. Minimum working height: 800 mm. Maximum working height: 1700 mm. Kdodpowtq Dtofx Ahhsr Speed: 0.5 RPM. Diameter of clamping plate: 900 mm. Rotating movement: 2 x 2.2 kW. Torque: 18950 Nm. The machine is also offered individually as a mono model (more affordable). Optional with a universal joint flange (cardan flange).

Condition: used, Welding Rotator SARAZIN type HD 100 Maxi loading capacity: 5000 KG Shelf diameter: Ø 1500 mm Shelf diameter with external extensions: Ø 2100 mm Tilting: de 0 to 135° New electrical panel with speed variator Ksdpezmxukefx Ahhjdr Voltage: 380 V Length: 2600 mm Width: 2200 mm Height in horizontal position: 1700 mm Weight: approx 4 T

Condition: used, Welding Rotator SAF POSISAF 1E Shelf diameter: Ø 295 mm Max capacity: 100 kg Manual Swivel Rotation by speed varitator right/left Equipped with one 3-jaws concentric chuck Ø 200 mm Kodpjzmxu Defx Ahhodr Voltage: 220 V mono Dimensions on support: L 800 x W 450 x H 1200 mm

Condition: good (used), Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding device, welding rotator, welding rotator and tilting table, welding rotator -Maximum load: 75 kg -Clamping diameter: 300 mm -Hollow shaft: Ø 42.5 mm -Drive: 0.1 kW -Speed: RPM -Axes: 2 pieces (swivel by hand) -Quantity: 1x welding rotator available -Price: per piece -Dimensions: 830/450/H920 mm Kodpsdwpdujfx Ahhsdr -Weight: 174 kg

Condition: used, Year of construction: 2003, Welding Rotator SAF POSISAF 1E Kdsdpszmxvbsfx Ahhjr Shelf diameter: Ø 295 mm Year of construction: 2003 Maxi Capacity: 100 kg Manual Swivel Rotation by speed varitator right/left Voltage: 220 V mono Total dimensions on support: 400 x 400 mm x H 1100 mm

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, Equipment: type plate available, manufacturer: PECO N30 Kedpfoxlr Tdex Ahhsdr rated power: 40/80 kVa KB 1970 production can weld in 2 directions rather water cooled, air operated Kb 32 A can weld 500mm in length voltage: 380v 50 Hz

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, Column lift turning device, 10-ton load capacity, available as a set or individually 2 sides powered Machine offered as a synchronized set or individually Protec turning device / positioner Syncrolift Double column, wireless and manual hand remote control Column adjustment electrically driven on both sides Load capacity 10,000 kg, 360° rotation Minimum working height: 800 mm Maximum working height: 1700 mm Speed: 0.5 rpm Clamping plate diameter: 900 mm Rotating drive: 2 x 2.2 kW Torque: 18,950 Nm Machine is also available individually as Mono model (more affordable) Kjdpfx Ahowtxxrshsdr Optional with articulated flange (Cardan flange)

Condition: good (used), Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding fixture, welding rotator, welding rotator and tilting table, welding rotator, welding rotator tilting table -Manufacturer: Kistler, Tilting welding turntable with mobile base -Turntable: Ø 400 mm -Speed: 0.08 to 6.3 rpm / 0.01 to 8 m/min at Ø 400 mm -Direction of rotation: clockwise/counterclockwise -Axles: 2 pieces Kjdpfx Ahsh D Il Tohjdr -tiltable: hand -Height adjustment: No -Quantity: 1 piece available -Overall dimensions: 740/580/H630 mm -Weight: 145 kg

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, year of last overhaul: 2011, Equipment: CE marking, documentation/manual, Friction welding machine from the manufacturer MTI, equipped for welding turbochargers. The machine is equipped with: - Siemens PLC, CPU 315, - Rexroth hydraulics - German user interface - CE marking Upon request, this machine can also be converted for many other welding tasks. Kdjdpfx Asv Uzf Eohhjr We can also produce your friction welding joints, up to 300 tons of clamping force. Please contact us for further information!

Condition: used, functionality: unexamined, type of input current: three-phase, total height: 3,000 mm, total length: 3,000 mm, input voltage: 380 V, type of cooling: water, welding current at 60% duty cycle: 1,000 A, welding current at 100% duty cycle: 800 A, welding current (min.): 250 A, welding current (max.): 1,250 A, Used ESAB submerged arc welding (SAW) system for sale, manufactured by ESAB AB / ESAB Welding Equipment AB, Sweden. The system is designed for mechanized submerged arc welding (SAW), including tandem welding AC/DC. It is suitable for welding long, straight seams, beams, profiles, sheet metal structures, cylindrical products, vessels, tanks, and heavy welded structures. Manufacturer: ESAB AB / ESAB Welding Equipment AB Country: Sweden Process: SAW – Submerged Arc Welding Type: Mechanized welding system / tandem welding system Inscription: UP Tandemschweißen Welding: DC + AC with ESAB power sources Welding head: Available, with flux hopper Work beam / chassis: Long ESAB welding beam / tractor Condition: Dismantled / stored, available for inspection Welding power sources ESAB TAE 800 Parameter Data Model ESAB TAE 800 Range 300 A / 28 V – 800 A / 44 V 100% duty cycle 800 A / 44 V 60% duty cycle 1000 A / 44 V Power supply 400 / 415 / 460 / 500 V, 50 Hz Protection IP23 ESAB LAE 1250 Parameter Data Model ESAB LAE 1250 Type Welding rectifier Range 250 A / 24 V – 1250 A / 44 V 100% duty cycle 1250 A / 44 V Power supply 220 / 380 / 415 / 500 V, 50 Hz Protection IP22 Weight 490 kg Data from the tandem welding plate Mode Current Voltage Direct current / DC 520 – 580 A 28 – 30 V Alternating current / AC 550 – 620 A 34 – 36 V Kdodpfx Ahozimbkohjr Travel speed: 680 – 800 mm/min. Included components: long ESAB welding beam / chassis; welding head; flux hopper; cables and hoses; control boxes; ESAB TAE 800; ESAB LAE 1250; submerged arc welding equipment. Condition: The system is used and is currently dismantled / stored out of active operation. Visible signs of use, dust, dirt, and storage are present. It is sold in its current condition, with the equipment shown in the pictures. On-site inspection and technical verification by the buyer are recommended before purchase.

Condition: like new (used), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, arm reach: 1,437 mm, For sale: Panasonic robotic TIG welding workstation purchased from ValkWelding. Workstation includes: Panasonic TM 1400 G3 robot (6 axes, reach 1437 mm, payload 6 kg), two-axis L positioner PD1000/500, TIG welding unit Tetrix 352 AC/DC Synergic CW, accessories, and safety equipment. Kdjdoy Efmgspfx Ahhsr This workstation is distinguished by its ability to safely weld not only steels and stainless steels but also aluminum. The process is highly synchronized with wire feeding and is capable of seam tracking and adapting to changes in arc height. A very versatile device. I am selling this system because our original capacity expectations have not been met (we don’t have work in the hundreds or thousands of pieces). Over its entire lifetime (approximately 5 years), the workstation was powered on for around 200 hours and did actual test welding for less than an hour in total. It is practically in like-new condition. It would be a pity for it to just “collect dust.” All support has been directly provided by ValkWelding. In case of sale, they will arrange installation, commissioning, and personnel training as agreed.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, Elumatec VS 750 four-head welding machine with EV850 4-axis CNC cleaning line. The welding machine and cleaner are currently programmed only for SCHÜCO profiles. Profile height range for welding: 30-185 mm Minimum window dimensions for welding: 350 x 350 mm Maximum window dimensions for welding: 2600 x 4000 mm Weld bead limitation: 0.2 mm and 2 mm Kdodpfx Ajx E Rd Dohher The welding machine features a touch operator panel based on Windows XP The cleaner is also equipped with an operator panel Online connection is available between the welding machine and the cleaner After welding, automatic transport to the cleaner is provided The cleaner operates in both manual and automatic mode In automatic mode, the rotation station turns the window to each specific corner to be processed by the cleaner. We provide assistance with machine disassembly and loading for transport.

Condition: good (used), Year of construction: 1975, machine/vehicle number: D 201238, Offer 17230 Technical data: - Load capacity 3600 kg - Faceplate diameter approx. 1050 x 1050 mm - Faceplate motorized, swiveling + rotating - Faceplate speed electrically infinitely adjustable 0.2 - 1 rpm - Motorized right + left rotation - Hand remote control - Welding current transmission 600 A - Drive 400 V - Table height in horizontal position approx. 1450 mm - Space requirement approx. W 1650 x H 1550 x D 2400 mm Kedov Hbzkopfx Ahhedr - Weight approx. 3500 kg - Hand remote control

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 28464, overall weight: 2,300 kg, input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, CAT 500 cutting center – an automatic machine designed for cutting PVC profiles using a circular saw. Numerical control with dedicated software allows for programming processing parameters, limiting the operator's tasks to loading profiles and collecting finished parts. Saw parameters: - Arbor: Ø 30 mm - Diameter: Ø 500 mm - Rotational speed: 3000 rpm - Max. saw blade thickness: 4.2 mm Technical data: - Voltage: 380–400 V AC3PE - Current: 8 A - Frequency: 50 Hz - Power: 3.8 kW - Air pressure: 7 bar - Weight: 2300 kg Standard equipment: - Tungsten carbide saw blade Ø 500 mm (arbor Ø30) - Welded frame with adjustable feet and the possibility of mounting to the floor - Industrial computer integrated with the machine - Infeed belts with inverter control and programmable acceleration/deceleration ramps - Label printer Dimensions: Ksdpfxozvmh Ro Ahhsdr - Infeed: 7900 mm - Machine: 1000 mm - Outfeed: 2600 mm - Max. width: 2300 mm - Max. height: 1700 mm - Overall length: 11500 mm

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52.693.00, feed length X-axis: 1,525 mm, feed length Y-axis: 1,525 mm, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, Welding Robot – Fully Equipped Vertical Bend Arm Robot 6 axes Reach: 1525 mm Equipped with automatic welding gun, type: DIX MALZ 520 Wire feed device, manufacturer: FRONIUS, type: ROB.VR1500 DINSE-ZA Includes 2 rotary welding tables Plate dimensions: each 1200 × 750 mm Pneumatically driven cleaning device Positioning and straightening station for the torch Kdsdpfxjrl S Ufs Ahhor Current source, manufacturer: FRONIUS, type: welding device TPS 4000 Supplied with technical documentation Note: The machine can be transported on a standard truck. Technical Attributes Dimensions (L × W × H): approx. 4700 × 3500 × 3800 mm Weight: approx. 5000 kg Year of construction: 2000

Year of construction: 2021, condition: ready for operation (used), Robot travel path: 5000mm, arm length: 2500mm, lift: 1000mm, spin radius: 2200mm, L-manipulator load capacity: 2000kg, lift velocity: 0,85m/min, swing speed: 1,7/min, turn speed: 6/min. Roboter type: IGM RTE 497-S in hanging position, control: full digital PC-Robotcontrol, Type RCE, software: WIN 10 & Linux based System + igm Robotsoftware K6, welding process: 135 (GMAW), single-wire, Ø1,2mm, welding power source: digital Invert Welding Power Source TPS 500i (500A at 40% duty cycle), robot periphery: rotating boom for floor installation with 2,5m boom length, number of working stations: 1, working station: 3-axis L-Manipulator with lifting device with 2t nominal load capacity, security Technology: Pistol-Security-Shut-down in wrist axis, emergency Stop on Handtablet, on Manipulators and Control Panel, three-coloured warning light for the operating Status partition, security Door. machine is complete, no defects known, documentation complete, was maintained regularly. An on-site inspection is possible. Kjdpfxjwc A Rde Ahhsdr

Condition: good (used), Year of construction: 1982, machine/vehicle number: 1501-2, Offer 26128 Technical Data: Kdedpfxoy Ec Emj Ahhsr - Max. load capacity in horizontal position: 5000 kg - Faceplate diameter: 1150 mm - Faceplate motorized tilting: 0 - 130° - Rotary movement electronically steplessly adjustable - Right and left rotation - Welding current transmission: approx. 500 A - Drive: 400 V - Table height in horizontal position: approx. 1220 mm - Handheld remote control - Required space: approx. W 1350 x H 1220 x D 1900 mm - Weight: approx. 3500 kg - Adapter plate with clamping device for round material

Condition: used, Year of construction: 2007, machine/vehicle number: 506 8026 / 479 6312 / 7028, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 2,500 mm, workpiece height (max.): 160 mm, number of axes: 4, actuation type: electric, overall weight: 3,000 kg, Equipment: documentation/manual, For sale: a complete, functional, and production-used welding and cleaning line from Rotox, manufactured in 10/2007. The line was used at EUROCOLOR for the production of PVC windows and doors (Schüco and Rehau profiles). Working direction: right to left (the right beam, from the welding machine's side, is a fixed beam). Kdsdpjzp Nz Tsfx Ahhsr The line includes: ● Rotox SMK 506 4K four-head welding machine ● Rotox EPA 479 automatic corner cleaning machine (four-axis, CNC) with WT 427 rotating station ● FIMTEC cooling station Photos and documents are available at this link: 1. Rotox SMK 506 4K four-head welding machine ● Year of manufacture: 10/2007, machine number: 506 8026 ● Fixed side of the machine: right (working direction from right to left) ● Profile arrangement on the table: outer side of the window facing down ● Weld bead allowance: 6 mm ● Flash control: 0.2–2.0 mm, automatically adjustable knives from above and below (used at approximately 0.2 mm) ● Maximum welding dimension: 2500 x 2500 mm (in practice, frames were welded up to approximately 2650 x 2650 mm) ● Minimum welding dimension: 320 x 420 mm, with automatic transport ● Frame welding: min. 350 x 500 mm – max. 2500 x 2400 mm ● Welding of U and T profiles and door frames (C-type welding) ● Heated knives for controlling the weld bead ● Quick replacement of Teflon film ● Machine safety fencing ● Data acquisition system from the welding machine ● Operating counter: approximately 385,000 welding cycles ● Manufacturer's specifications: maximum connection power 10 kW, voltage 400 V, current 20 A, 50 Hz, air pressure 6–7 bar, air consumption approximately 150 NL/weld, profile height 45–160 mm, maximum profile width 140 mm, weight approximately 3000 kg. Material processed: PVC profiles 2. Rotox EPA 479 automatic corner cleaning machine + WT 427 rotating station ● Year of manufacture: 10/2007, cleaning machine number: 479 6312 ● WT 427 rotating station connected to EPA 479: machine number 7028, dimensions 5700 x 2500 mm, transport direction to the right ● Fixed side of the machine: right ● Profile arrangement on the table: outer side of the window facing down ● Maximum dimensions of processed frames: 2500 x 2500 mm ● Unit for drilling holes for Siegenia and roto hinge hardware – unit with a six-spindle head, pneumatic drive ● Hole drilling for hinge: 4 x Ø3 mm, 2 x Ø6 mm (according to technical drawing) ● Equipment: 2x unit for cutting the visible surface, 2x second unit for cutting the visible surface, 2x CNC unit for cleaning under the seal (pneumatic drive), unit for cutting the inner surface vertically (sash bar), unit for cutting the angled surface up to 23° with an additional bevel/arc (chisel cleaning), unit for cutting the inner surface horizontally, tools for internal processing, 170 mm contouring blade (right), grooving knives S=3.0 mm/G=0.5 mm (2 pcs.), knives for flat trimming without a groove (2 pcs.), extension cable for the control panel ● Operating counter: approximately 9,863,552 cleaned corners ● Note: Precise minimum dimensions of profiles and welds that can be cleaned in manual/automatic mode – to be confirmed directly with Rotox Polska 3. FIMTEC cooling station ● Year of manufacture: approximately 2021–2022 ● Purchased from GRAF Machines are functional, disassembled – not currently in operation – prepared for transport. Contact: EUROCOLOR Sp. z o.o. ul. Toszecka 47, 44-120 Pyskowice Machines are functional and ready for inspection and demonstration before purchase. Disassembly

Condition: used, Year of construction: 2006, Technical details: table load: 22 t table diameter: 2500 mm Total power requirement: 9,6 kW max. table load: 22.000 daN / 22000kg table rotating: links/rechts Grad table - inclinable: 0 - 120 Grad swival range +/-: 120 Grad height of the swivelling axis: 1700 mm Ksdju Nkx Ijpfx Ahhjdr machine weight approx.: 12000 kg rotary table revolutions per minute : 0,05 - 1,0 U/min connected load: ca. 5,0 kVA dimensions LxWxH: ca. 4,5 x 2,5 x 2,3 m Welding positioning turn-tilt table developed and manufactured by Müller Opladen ARC KON EWeding GmbH. Machine frame solid, welded steel construction with ball-bearing tilting device Table with centering grooves and T-slots for M24 according to DIN 650. Infinitely variable rotary drive from 0.05 - 1.0 rpm. Height to center of swivel axis 1700 mm hydr. tilt adjustment, infinitely variable from 0 - 120° Drive is designed for a torque of approx. 40,000 Nm at the turntable Accessories: 1x 2-row foot switch 1x remote control 1x working platform *

Condition: used, Year of construction: 2003, functionality: unexamined, machine/vehicle number: 2735636, total height: 2,300 mm, total width: 2,230 mm, total length: 4,000 mm, overall weight: 3,500 kg, Equipment: cabin, Reis Robotics Welding Robot Cell SRV6-C (Year of Manufacture: 2003) Complete system comprising robot, positioner, and power source Robot – Reis SRV6-C Type: SRV6-C Manufacturer: Reis Robotics Year of manufacture: 2003 Robot weight: 200 kg ID no.: 2735636 Commissioning no.: 52 1050 Axes: 6 Typical application: MIG/MAG welding Kdsdpfeyubygjx Ahhjr Positioner – Reis RND01 (Turntable) Type: RND01 Manufacturer: Reis Robotics Year of manufacture: 2003 Commissioning no.: 52 1050 Machine weight: 300 kg Function: Single-axis turntable / welding positioner Application: Holding and rotational positioning of welding jigs/fixtures Control: Integrated with the robot control system Control cabinet of the cell Type: SRV6-C Manufacturer: Reis GmbH & Co Maschinen-Fabrik Year of manufacture: 2003 Electrical connection: Voltage: 3~ 220/400 V Frequency: 50 Hz Connected load: 3 kVA Fusing: max. 5 A Pneumatics: Pmin: 5 bar Pmax: not used as per nameplate (no hydraulics present) Control cabinet weight: 125 kg Welding power source – Fronius TransPuls Synergic 4000 (TPS 4000) Manufacturer: Fronius Model: TransPuls Synergic 4000 (TPS 4000) Process: MIG/MAG / Pulsed arc / Synergic programs Compatible with Reis robot controllers Accessories: Torch kit Hose assembly Cooling circuit (external tank visible) Dimensions: 4.0 × 2.23 × 2.3 m (Robot welding cell in closed design) Operating hours counter: 29,593 h

Condition: good (used), Year of construction: 1986, machine/vehicle number: 205891, Offer 25396 Technical Specifications: - Load capacity: 250 kg - Faceplate diameter: 600 mm Kdsdpfx Aox Tqblshhsr - Table height in horizontal position: 910 mm - Faceplate continuously tiltable by hand crank - Faceplate rotational speed electrically variable: 0.2 – 2 rpm - Welding current transmission: 300 A - Drive: 220 V - Right and left rotation - Electric foot switch - Space requirement: approx. W 800 x H 910 x D 1,200 mm - Weight: approx. 150 kg