Used Willemin for sale (13)

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 164, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, controller model: GE FANUC Series 16i-M, spindle speed (max.): 14,000 rpm, TECHNICAL DETAILS X-axis travel: 250 mm Y-axis travel: 200 mm Z-axis travel: 300 mm Number of axes: 3 Max. spindle speed: 14,000 rpm Table length: 400 mm Table width: 250 mm Number of T-slots: 3 Distance between T-slots: 80 mm T-slot width: 14 mm Tool magazine capacity: 48 Tool holder: HSK E40 Working feed rate: 20 m/min Rapid traverse: 30 m/min Max. feed force: 3,700 N MACHINE DETAILS Control: GE FANUC Series 16i-M Resolution: 1 µm Compressed air supply: 6 bar Electrical connection: 50 Hz 3x 400 Volt Spindle drive power: 10.4 kW Total power requirement: 18 kVA Lodpfxsyhnzke Abcshd Dimensions & Weight Dimensions (L x W x H): 2,100 x 1,630 x 2,265 mm Machine weight: approx. 1,700 kg Required floor space: approx. 2 m² EQUIPMENT Vice: Jaw width 100 mm Set of tool holders Coolant system Lighting

Condition: used, WILLEMIN MACODEL W 408 S is a 5-axis machining center offering high precision, excellent accuracy and proven reliability. Travels X 250 mm, Y 200 mm, Z 300 mm; B axis -105°/+35° (140°), C axis 360°, resolution 0.001°. Spindle nose HSK 40, speeds 500–12,000 t/min (stepless). Work feed 15 m/min, rapid traverse 30 m/min. Supply 3x 380 V 50 Hz, air 6 bar; weight ≈1700 kg; dimensions L1700×W1950×H2200 mm. Tool magazine 24 positions. Enables tight tolerances; typical applications: watchmaking, automotive, aerospace, medical and machine tool sectors Lhjdpfx Asx S N Easbcjd

Condition: reconditioned (used), Year of construction: 2008, operating hours: 13,600 h, functionality: fully functional, machine/vehicle number: 106, Machine partially overhauled by Willemin with new geometry and a new secondary spindle (6,000 rpm). New ball screws on X-Y-Z axes. Alignment and calibration. Ready for production. 5 axes – Fanuc 31i A5 – HSK40E – max 30,000 rpm – Year 2008. Country of manufacture: Switzerland Voltage: 3x400V / 60Hz; 50 A; 35 kVA Dimensions: 270x200x260 cm Net machine weight: 2,500 kg Lhjdpfx Abew T Tlrjcsd TECHNICAL SPECIFICATIONS WILLEMIN MACODEL 508 MT Control: Fanuc 31i A5 X axis: 450 mm Y axis: 200 mm Z axis: 425 mm B axis: -45° to +100° U axis: 300 mm Tool magazine: 48 PickUp stations Main spindle A: max Ø42 mm, max 6,000 rpm Main spindle C: max Ø42 mm, max 3,000 rpm Milling motor spindle: HSK40E, max 30,000 rpm All technical details are given without obligation and subject to errors or omissions.

Condition: excellent (used), Year of construction: 2010, operating hours: 28,600 h, functionality: fully functional, Machine partially overhauled by Willemin with new geometry. Ready for production. Country of origin: CH (Switzerland) Voltage: 3x400V / 60Hz; 50 A; 35 kVA Dimensions: 270x200x260 cm Net machine weight: 2500 kg TECHNICAL SPECIFICATIONS WILLEMIN MACODEL 508 MT Control: Fanuc 31i A5 X Axis: 450 mm Y Axis: 200 mm Z Axis: 425 mm B Axis: -45° to +100° U Axis: 300 mm Tool magazine: 48 stations PickUp Main spindle A: max Ø42 mm, max 6,000 rpm Main spindle C: max Ø42 mm, max 3,000 rpm Milling motorized spindle: HSK40E, MAX 30,000 rpm Ljdpfx Aow T Tk Isbcohd Subject to error or omission, technical data provided without obligation.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK-E40 - Spindle power : 10/15 [kW] - Spindle speeds : 30000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 450/200/425 [mm] - Rapid traverses rates (X/Y/Z) : 40 [m/min] B ROTARY AXIS - Travel : -15/+100 [°] Lsdsx Tiwlopfx Abcehd - Indexing precision : 0.0001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 48 TURNING SPINDLE - Spindle speeds : 6000 [rpm] - Max. bar diameter : 42 [mm] WEIGHT & DIMENSIONS - Machine floor space : 3150 x2650 [mm] - Machine height : 2600 [mm] - Machine weight : 2500 [kg] MACHINE HOURS - Number of working hours : 22309 [h] EQUIPMENT - CNC : Fanuc 31i-Model A5 - 3 colors status lamp - Coolant tank * with cooling unit for coolant - Oil mist extractor - Bar loader : -

Condition: ready for operation (used), Year of construction: 2008, operating hours: 90,000 h, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, controller model: Fanuc Series 16i MB, spindle speed (max.): 30,000 rpm, In recent years, more than €50,000 has been invested in the machine – the following components have been replaced/repaired, among others: Main spindle - tool holder Spindle drawbar Tool change gearbox Ball screws for X/Y/Z/U axis Motor for Z-axis Motor for U-axis TECHNICAL DETAILS Travel X: 250 mm Travel Y: 200 mm Travel Z: 300 mm Max. workpiece diameter: 32 mm Spindle speed: max. 30,000 rpm Spindle interface: HSK-E40 Tool changer: 48 positions Axes: 5 + gripper MACHINE DETAILS Control: Fanuc Series 16i MB Operating hours: approx. 75,000 h Lhsdpfxexuphqe Abced EQUIPMENT Bar loader LNS Hydrobar Express 332 Coolant filtration system Internal coolant supply (IKZ) Spindle cooling Note: The machine is offered without tool holders and collet chucks.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 103, travel distance X-axis: 740 mm, travel distance Y-axis: 185 mm, travel distance Z-axis: 220 mm, controller model: NUM 1060, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X: 740 mm Travel Y: 185 mm Travel Z: 220 mm A-axis: 110° C-axis: 360° Tool holder: ISO25 Spindle speed: 50–12,000 rpm Minimum resolution: 0.001 MACHINE DETAILS Control: NUM 1060 Connected load: 10 kVA Dimensions & Weight Dimensions (L x W x H): 2,215 x 2,500 x 2,650 mm Machine weight: 3,550 kg EQUIPMENT Lhjdpfx Asxtm Nvjbced Various tool holders Operating manual / Electrical schematic

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 106, travel distance X-axis: 740 mm, travel distance Y-axis: 185 mm, travel distance Z-axis: 220 mm, controller model: NUM 1060, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lsdpfxextm H Is Abcjhd Travel X: 740 mm Travel Y: 185 mm Travel Z: 220 mm A-Axis: 110° C-Axis: 360° Tool holder: ISO 25 Spindle speed: 50–12,000 rpm Minimum resolution: 0.001 MACHINE DETAILS Control: NUM 1060 Connected load: 10 kVA Dimensions & Weight Dimensions (L x W x H): 2,215 x 2,500 x 2,650 mm Machine weight: 3,550 kg EQUIPMENT Renishaw probing system Various tool holders Operating manual Electrical diagram

Condition: excellent (used), Year of construction: 2011, TECHNICAL DATA Linear Axes (Slides X, Y, Z) Travel distances: Axis X: 250 mm Axis Y: 200 mm Axis Z: 300 mm Rapid traverse (X, Y, Z): 30 m/min Feed force (X, Y, Z): 3700 N Resolution (X, Y, Z): 0.0001 mm Rotary Motion of Motor Spindle – Axis B Rotary travel range: -15° to +100° Rotary travel range (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Maximum speed: 20 rpm Drive torque: 750 Nm Hydraulic clamping: 50 bar Holding torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Power at 100% duty cycle: 10 kW Power at 25% duty cycle: 15 kW Nominal torque (100%): 8 Nm Nominal torque (25%): 12 Nm Speed range: 50 – 30,000 rpm Axis A (Bar capacity Ø 40 mm) Spindle type: A4 Max. bar diameter: 40 mm Max. speed: 35 rpm Drive torque (nominal): 112 Nm Drive torque (max.): 238 Nm Resolution: 0.0001° Axis clamping (Axis A): Pressure: 70 bar Holding torque: 130 Nm Tool Changer Number of tool discs: 2 Positions per disc: 24 Max. tool weight: 1 kg Rotational speed: 60 rpm Max. tool diameter (adjacent positions occupied): 50 mm Max. tool diameter (adjacent positions free): 63 mm Max. tool length (from spindle nose): 95 mm Coulisse de Reprise Travel distance: 80 mm Feed force: 1700 N Tilting moment: 90 Nm Resolution: 0.0001° Hydraulic pressure for tilting motion: 100 bar Workpiece Manipulator Pneumatic vertical slide gate: Ø 25 mm Stroke: 710 mm Linear travel per motor revolution: 70.4 mm/rev Max. transfer speed: 60 m/min Max. workpiece weight: 5 kg Max. manipulator stroke: 1120 mm (2×560 mm) Max. vertical travel: 150 mm Part pick-up Ø/length: Ø 32 mm / 100 mm Part ejection Ø/length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip force: 45 N (at 6 bar) Max. gripper opening: 14 mm (2×7 mm) Lsdpfxswv Hnmo Abcohd Pneumatic Equipment Operating pressure: 6 bar Hydraulic System Operating pressure: 95 – 105 bar Coolant System Coolant tank volume: 80 liters Chip pan volume: 30 liters Kinematic viscosity in operation: 10 – 15 cSt SCOPE OF DELIVERY Includes (not limited to): Willemin Macodel W 408 B machining center Extraction unit Fire suppression system Probe Coolant system Oil chiller Data backup Complete operator documentation Exact scope of delivery as per photo gallery No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 32,705 h, functionality: fully functional, machine/vehicle number: 518MT-119, travel distance X-axis: 630 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 500 mm, milling spindle speed (max.): 20,000 rpm, Equipment: chip conveyor, No reserve price – guaranteed sale to the highest bidder! 5-axis machining centre with comprehensive equipment package! TECHNICAL DETAILS Axes: X-axis: 630 mm Y-axis: 320 mm Z-axis: 500 mm B-axis: -45° to +100° U-axis: 477 mm Main Spindles: Main Spindle A: Hainbuch Spanntop SP.0618.01778.00 Max. speed Main Spindle A: 6,000 rpm Main Spindle C: Hainbuch SK65, max. Ø 65 mm Max. speed Main Spindle C: 3,000 rpm Milling Motor Spindle: Taper: HSK63 Max. speed: 20,000 rpm Tool Magazine: Tool positions: 72 Control: Fanuc 16i MB MACHINE DETAILS Electrical Data: Voltage: 3 × 400 V / 50 Hz Fuse protection: 80 A Power: 55 kVA Dimensions & Weight: Dimensions without magazine (W x D x H): 285 cm x 280 cm x 280 cm Net weight: 4,600 kg Operating hours: 32,705 h EQUIPMENT Renishaw TS27R probe Tool breakage control Detector 202 Workpiece breakage control Detector 101 Spreitzer centric vise HZS 180-80 A WM Spindle coolant Marksa type CPOW 1000 Bar feeder Breuning SiMag type 70.1 Driven tools Denitool Modulo D Chip conveyor NB 300 cam plate chain Lhodpfx Abjwzxxnscsd Signal light Werma CO₂ fire extinguisher Kraft & Bauer

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, workpiece diameter (max.): 32 mm, rotational speed (min.): 500 rpm, rotational speed (max.): 30,000 rpm, overall weight: 1,700 kg, spindle nose: HSK-E40, number of slots in tool magazine: 48, tool length: 95 mm, tool diameter: 63 mm, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, WILLEMIN MACODEL W408 MT TECHNICAL CHARACTERISTICS : Year : 2007 CNC control : FANUC 16i-MB Number of axes : 5 Stroke X axis : 250 [mm] Stroke Y axis : 200 [mm] Stroke Z axis : 300 [mm] Traversing feeds X, Y and Z axes : 30000 [mm/min] Ledpfx Abowu Ruhscehd Max. bar diameter in turning spindle : 32 [mm] Main spindle max. speed : 6000 [rpm] Main spindle max. power : 3.7 [kW] Angular C axis stroke : 360 [°] B axis swivelling stroke : 115 [°] Spindle type : HSK-E40 Min. spindle speed : 500 [rpm] Max. spindle speed : 30000 [rpm] Spindle power : 10 [kW] Tool changer magazin number of stations : 48 Max. tool lenght : 95 [mm] Max. tool diameter : 63 [mm] Lubrication tank capacity : 80 [l] Collant pump flow rate : 40 [l/min] Rated current : 25 [A] Supply voltage : 400 [V] Weight : 1700 [Kg] EQUIPMENT INCLUDED : x1 0-90° pivoting backworking unit (6th side machining) x1 backworking vice x1 RENISHAW TS27R tool probe x1 RENISHAW NC4 TX laser system for tool setting and tool breakage detection x68 type F35 turning collets x9 HSK-40E milling/turning attachments x1 IEMCA BOSS 332 E bar feeder x1 spindle chiller x1 cutting fluid chiller x1 ELBARON mist extractor x1 3-colour status lamp x1 CO2 automatic fire extinguishing system (to be checked by the purchaser with a competent body) x1 set of technical manuals Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. HERMLE , DMU , monoblock , variaxis , chiron

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 500 mm, workpiece length (max.): 500 mm, controller manufacturer: Fanuc, controller model: 31i - Model A5, spindle speed (max.): 20,000 rpm, tool diameter: 125 mm, tool length: 250 mm, tool weight: 7,500 g, operating hours of spindle: 5,000 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 20,000 rpm HSK63 180 tool positions IKZ 20 - 80 bar programmable Ledpfx Abet Azdtjcehd Bar passage Ø 65mm Hainbuch clamping top BZI65 LNS Servo II bar feeder (flat and 4-edge) Renishaw tool measurement/breakage monitoring CLIMATIZED machine room 2 spreader center clamps with hydraulic pressure regulation, Delivery/invoice possible from 2 locations: Swiss plant Austrian plant

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 1 MAIN SPINDLE - Max. bar diameter : 23 [mm] - C axis indexing precision : 0.001 [°] TURNING-MILLING SPINDLE - X/Z stroke : 250/300 [mm] - Y stroke : 200 [mm] - B Axis stroke : -15/+100 [°] - B axis indexing precision : 0.001 [°] - Tool type : HSK E40 - Spindle speeds : 30000 [rpm] - Spindle power : 10 [kW] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 24 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine weight : 1700 [kg] EQUIPMENT Lhsdevh I Ugjpfx Abcsd - CNC : NUM 1050 - Coolant tank * Coolant through spindle - Oil mist extractor : Elbaron RON/A 60 - Cooling unit : MARKSA CSW100 - Unit for 6th face machining - Bar loader : Willemin - Collet chuck