Used Wire Erosion Machine for sale (65,226)

Condition: used, Year of construction: 2004, Technical details: table length: 920 mm table width: 600 mm ampere: 13,2 A weight of the machine ca.: 6 t dimensions of the machine ca.: 2,46 x 2,24 x 2,33 m X-axis: 600 mm y-axis: 400 mm Z-axis: 260 mm max. table load: 1500 kg The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg. Godpfxeuzbayj Af Aebl *

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Gsdpfx Aow Ucyuef Aobl Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 525 mm, workpiece height (max.): 510 mm, workpiece width (max.): 1,000 mm, workpiece length (max.): 1,300 mm, type of input current: three-phase, overall weight: 6,800 kg, Agie Progress V4. Machine available for viewing at our Semsales premises at the end of June. Machine cleaned, serviced, and tested, fully functional. Gsdpowq U I Djfx Af Aobl This machine is available for viewing and testing at our premises.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, FANUC alpha - O I B machine travels: X 320, Y 220, U 120, V 120, Z 180 automatic wire threading Gsdpfsxf I D Ejx Af Asbl can be seen in good working condition year 2002

Condition: ready for operation (used), functionality: fully functional, Very nice Wire-o punching machine. Electric with foot pedal, max format 710 mm. Punches up to 20 sheets of 80 gsm with square holes. Gsdpfxsymn Hwj Af Ajbl You are of course welcome to test this machine with us. We can arrange transport/packaging for you and load it onto a truck or into a container. Please request a price including transport (location: Netherlands). Kind regards, Henk Hoos.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 55DM2752, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 400 mm Gbedoy I Uvcepfx Af Ajl Travel range Z-axis: 310 mm Travel range U-axis: ±75 mm Travel range V-axis: ±75 mm Wire diameter: 0.1 - 0.3 mm Max. workpiece dimensions: 1,050 x 820 x 305 mm Max. workpiece weight: 1,500 kg Table dimensions: 840 x 560 mm Table design: U-shaped Taper angle: max. 15° Taper angle at workpiece height: max. 260 mm MACHINE DETAILS Dielectric tank Tank capacity: 860 l Filtered particle size: 3 µm Water purifier: 10 l Dry weight: 350 kg General power supply: 13.5 kVA Air pressure: 0.5 - 0.7 MPa Air consumption: 75 l/min or more Dimensions & Weight Dimensions (W x H): 2,022 x 2,150 mm Weight: 3,500 kg

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 410 mm, controller model: Fanuc Alpha 180is-WB, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the specified deadline, by 08.06.26! TECHNICAL DETAILS Workpiece weight: 1,000 kg Travel distance X-axis: 550 mm Travel distance Y-axis: 370 mm Gedsy Nmxxjpfx Af Asbl Travel distance U-axis: 410 mm Travel distance V-axis: 120 mm Travel distance Z-axis: 120 mm Maximum cutting angle: 30° Number of axes: 5 Rapid traverse X-axis: 900 mm/min Rapid traverse Y-axis: 900 mm/min Rapid traverse U-axis: 450 mm/min Rapid traverse V-axis: 450 mm/min Rapid traverse Z-axis: 900 mm/min MACHINE DETAILS Control system: Fanuc Alpha 180is-WB Operating hours: approx. 32,000 h Machine weight: 3,100 kg EQUIPMENT Automatic wire threading Note: Sale does not include the monitor above the control unit.

Year of construction: 2012, condition: ready for operation (used), - USED - WIRE EDM MACHINE WITH AWF X-AXIS TRAVEL: 750 mm Y-AXIS TRAVEL: 500 mm Z-AXIS TRAVEL: 410 mm U/V-AXIS TRAVEL: ± 100 mm RAPID FEEDS X-Y-Z: 1,3 m/min MAX  PIECE WEIGHT: 3000 Kg MAX PIECE SIZE: 1300 x 1000 x 405 mm TABLE SIZE: 1100 x 875 mm DRAFT ANGLE / DRAFT HEIGHT: ± 15 °; 360 mm WIRE SPEED: 0-15 m/min WIRE DIAMETER: 0,20-0,36 mm CONTROL UNIT: MITSUBISHI 3D Advance WEIGHT: 5700 Kg OVERALL DIMENSIONS: 3495 x 3143 x 2633 mm NOTE: CNC Z AXIS; WIRE CRUSHER; LINEAR SCALES ON X and Y AXIS; 20 Kg REEL OF THREAD UNIT Gbsdpfxoytkdrs Af Ael

Year of construction: 2001, condition: ready for operation (used), - USED - WIRE EDM MACHINE WITH AWF X-AXIS TRAVEL: 350 mm Y-AXIS TRAVEL: 250 mm Z-AXIS TRAVEL: 220 mm U/V-AXIS TRAVEL: ± 80 mm Gbedpfx Aoyry Taof Ajl MAX  PIECE WEIGHT: 450 Kg TANK SIZE: 895 x 650 x 220 mm TABLE SIZE: 600 x 400 mm DRAFT ANGLE / DRAFT HEIGHT: 20 °; 80 mm WIRE SPEED: 0-15 m/min WIRE DIAMETER: 0,1-0,3 mm WEIGHT: 3000 Kg OVERALL DIMENSIONS: 1650 x 2125 x 2080 mm ACCESSORIES: ETHERNET PORT ; PCMCIA SERIAL PORT ; RS 232 SERIAL PORT

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, X-axis 500 mm Y-axis 350 mm Z-axis 300 mm U/V-axis 75 mm Max. workpiece dimensions 1,050 x 800 x 290 mm Max. table load 1,500 kg Machine weight approx. 4,000 kg Machine is available immediately from stock. Gedpjyvr Tzefx Af Asbl

Condition: used, Year of construction: 2007, Travel distance: X 500 mm Y 350 mm Gbjdpfx Aouu Dl Rof Aol Z 300 mm Water bath machine Automatic wire threader

Condition: excellent (used), Year of construction: 1989, Machinetype: barbed wire machine Gedpfxow N D Sue Af Aebl Make: VITARI Type: MFS Constr. year: 1989 line wire diameter: 1,6-2,8mm point wire diamter: 1,6-2,5 mm output – meter/min: 27-47 distance of barbs: 50-150mm Excellant condition

Condition: used, Year of construction: 1989, Model - 600/6 Year - 1989 Dies suitable for drawing low carbon steel wire rod entry diameter 5.5/6 mm max. They are two mirror dies and one has 5 steps and the other 6 steps. All with 600 mm shooting capstans. They both have a vertical skein for winding yarn onto loops. DC electrical equipment included. The dies will be sold in their "used, working, seen and liked" condition. Gbodpfxsyubh Ro Af Ajl

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Godpsr Nfvmefx Af Asbl Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Year of construction: 2017, condition: like new (used), 2D Wire Bending Machime Year - 2017 Gbedpfx Afomqk Tpe Ajl Manufacturer - VIBRA Wire diameter - 1-4 mm Capacity - 30pieces/ min Power - 3,5 kw

Year of construction: 1997, condition: good (used), Machine info: EVG Polybend stirrup machine PBE 2-16 come with 2 Pay offs - build in 1997 comes with a complete new control unit - original EVG Single wire: 6 –16 mm Gbedpfen Ut A Sex Af Ael Twin strand: 6 –12 mm Voltage 400 Volt 50 Hz 30 Kw Production year: 1997

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 350 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, total height: 2,015 mm, total length: 2,435 mm, total width: 2,203 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 215 mm, workpiece width (max.): 725 mm, workpiece length (max.): 600 mm, overall weight: 2,850 kg, warranty duration: 12 months, The Kmway EK-Series Wire EDM machine has been developed for users who value accuracy, efficiency, and long-term reliability. Thanks to its compact design, advanced wire threading technology, and robust, thermally balanced construction, it offers the perfect combination of precision and practical application. Gbsdpfxey Rk H Ns Af Aol Why choose the EK-Series? – Next-generation Automatic Wire Threading (AWT): Highly reliable threading system that operates with or without flushing, increases machine uptime, and reduces operator intervention. – Linear Motor Drive: Friction- and backlash-free motion improves long-term cutting accuracy and reduces mechanical wear compared to conventional ball screw drives. – Extremely Rigid One-Piece Frame: Thermally balanced and designed for stability – ensures dimensional accuracy even during long or high-load machining cycles. – Small Footprint, High Performance: Compact design with integrated generator and filtration system, ideal for confined workshop spaces without compromising on performance. – Advanced Filtration System: The improved design allows for a 3 to 5 times longer filter life than conventional systems and enables quick and easy replacement when needed, minimizing downtime. – Operator-friendly Head Design The upper and lower heads are optimized for easy maintenance access, ensuring consistently high output quality with less effort. With decades of experience in the field of electrical discharge machining (EDM), Kmway provides energy-efficient, high-precision solutions that are appreciated worldwide. Technical Specifications: Axis Travel (X, Y, Z) mm: 400 x 300 x 220 Axis Travel (U, V) mm: 60 x 60 Maximum Workpiece Size (W, D, H) mm: 725 x 600 x 215 Maximum Workpiece Weight kg: 350 Axis Drive System: Linear Motor for X and Y axes U + V + Z: AC Servo Motors X-Y Axis Traverse Speed mm/min: 1800 Wire Diameter mm: Ø 0.15–0.3 (Standard 0.25) Maximum Taper Angle: ±14.5°/80 mm Machine Weight kg: 2850 Machine Dimensions (W x H x D) mm: 2203 x 2015 x 2435

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Charmilles Robofil 440 CC Year of manufacture: 2004 Charmilles Millenium control Travel paths (X / Y / Z): 550 x 350 x 400 mm Travel paths (U / V): 550 x 350 mm Max. taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed: 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.15 mm to 0.33 mm Gsdpfx Asy Ifrhsf Aebl Machine dimensions (complete): 2600 x 2810 x 2240 mm Total machine weight: 3300 kg The machine is currently connected to power and can be inspected under power. On request, we offer the following services: - Commissioning of the machine at your site - Overhaul with 6 months warranty - Control system training - Accessories such as chiller and clamping devices

Year of construction: 2003, condition: ready for operation (used), A CNC wire EDM machine Charmilles is available. Travel X/Y/Z: 340mm/220mm/220mm, travel U/V: 350mm/220mm, max. taper angle: +/-30°, max. taper height: 220mm, max. workpiece dimensions X/Y/Z: 1100mm/550mm/220mm, max. workpiece weight: 750kg, table dimensions X/Y: 680mm/450mm. Machine dimensions X/Y/Z: 2050mm/2050mm/2000mm, weight: approx. 3250kg, working hours: 97916h. Documentation available. An on-site inspection is possible. Gbodpey R Dtcsfx Af Asl

Condition: used, Year of construction: 2007, Wire EDM machine Sodick AQ537L, year 2007, with low operating hours. It is equipped with a total operating hours counter (powered-on hours), which shows approximately 4,500 hours. Of these, about 70% are actual wire EDM machining hours, equating to roughly 3,100–3,500 true working hours. Gjdpfxjy Rxtks Af Aebl

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, High-precision wire EDM machine GF CUT 1000 Year of manufacture: 2018 Travel ranges (X/Y/Z): 220 x 160 x 100 mm Travel ranges (U/V): +/- 40 mm Max. taper: 3° at 80 mm height Wire diameter from 0.05 mm to 0.20 mm Best achievable surface finish: Ra = 0.08 µm Max. workpiece dimensions: 300 x 200 x 80 mm Gbedpfoy E Intsx Af Aol Max. workpiece weight: 35 kg Includes AGIEJOGGER hand control unit for convenient machine setup 15" LCD color display with lift keyboard and mouse AGIEVISION control system Includes AGIESETUP 3D Includes AGIEDUO dual-wire system for automatic changeover between two wire diameters Machine dimensions: 1400 mm x 1900 mm x 1970 mm Machine weight: 2700 kg The machine has been cleaned, overhauled, and thoroughly tested by our specialists. We are happy to commission the machine at your facility and provide training on the control system and machine operation.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Machine FANUC alpha - O I C5 Travel ranges: X 320, Y 220, U 120, V 120, Z 255 automatic wire threading good condition year of manufacture 2004 Gbsdpfx Aey E In Tof Ael

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, GF AGIECHARMILLES CUT 3000 Year of manufacture: 2013 Travel ranges: X= 500 mm, Y= 350 mm, Z= 256 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Gbsdpfx Asy Ed Ensf Ajl Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.33 mm (incl. KIT 50) Submerged-type machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Includes AGIEJOGGER handbox for convenient setup Includes AGIESETUP 3D Includes automatic wire changer AWC (use of 2 wire spools) Includes Conic-Plus option Includes Fast-Threading option Includes Smart-Threading option VISION 5 control system AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine has been thoroughly cleaned, overhauled, and extensively tested. A laser measurement of the axes was performed in-house. We are happy to carry out an individual test on the CUT 3000 for you. Including user training at Techma on your overhauled machine Optional services we offer: - Transport - Commissioning - Chiller - Clamping devices - Consumables

Condition: used, Year of construction: 2006, Wire erosion / EDM Travel distance X: 570 mm Travel distance Y :370 mm Travel distance Z: 350 mm max. workpiece size X: 770 mm max. workpiece size Y: 520 mm max. workpiece size Z: 340 mm max. workpiece weight: 1000 kg table size X: 806 mm table size Y: 496 mm with AWF ( Automatic Wire Feeding ) U / V axis: 120 x 120 mm generator: 60 Ampere 3-sided rise and fall tank Godpfsy Egfkex Af Aebl Linear drives on axes X, Y, U, V Linear scales on axes X, Y, U, V Automatic high-speed wire threading unit Ceramic components integrated in working table, Z axis quill, clamping block, wire guide Dielectric cooling controlled by thermostat 15" TFT colour monitor Max. matching current 60 A CNC power supply unit LQ33W

Year of construction: 1999, condition: ready for operation (used), A Mitsubishi CNC wire EDM machine including cooling unit is available. Workpiece dimensions X/Y/Z: 1050mm/800mm/295mm, max. workpiece weight: 800kg, table dimensions X/Y: 780mm/630mm, travel X/Y/Z: 500mm/350mm/300mm, max. table feed rate: 1300mm/min, wire diameter range: 0.2mm-0.3mm, max. wire feed rate: 250mm/s, wire tension range: 2N-25N, tank volume: 635l. Machine dimensions X/Y/Z: approx. 1850mm/2350mm/2050mm, weight: approx. 2550kg. Documentation available. An on-site inspection is possible. Gbedpfoy Nnawex Af Ajl