Used Wood Dust for sale (10,790)

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling Fgsdpfeu R Sxxsx Ap Djh - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: new, Integrated pre-separator Integrated automatic extinguishing system Efficient and economical: large-volume compressed air tank with with fast-switching diaphragm valves for effective OPTI JET filter cleaning and minimum compressed air consumption. So simple and so effective: OPTI JET cleaning and bag filter with bag filter with snap ring lock. Extremely economical: Energy-efficient drives in accordance with IE3 Safe in the event of an emergency: Maintenance-friendly automatic extinguishing system. Peace and quiet: the soundproofed air recirculation system from AL-KO. All options are open: PLC control for manual and automatic automatic operation. Countless options from machine detection to slide control to frequency-controlled operation operation, to name just three examples. Nothing goes wrong: Collecting container with inspection window. Practical down to the last detail: container lock with ergonomically ergonomically shaped clamping lever. Can be retrofitted: conversion to discharge via briquetting press briquetting press or rotary feeder possible. - High suction capacity - little space requirement - 100 % air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control unit - Optimum filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust bulkhead for dust-free container change - (optional: safety interlocking of the containers) - Freely configurable module replacement and expansion options ----- Technical data ----- Extraction nozzle Ø: 300 mm, Nominal volume flow: 5,089 m³/h, max. volume flow: 6,000 m³/h, Fgjdpfxsu R S A Rj Ap Doh max. negative pressure: 2,587 Pa, Filter area: 30 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 7.5 kW, Dimensions (LxWxH): 3,000 x 1,058 x 2,361 mm, Sound pressure level: 71 dB(A), Weight: 838 kg, according to: GS - HO - 07 - new exhibition machine -

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 550 kg, fuel: super 95, cutting length (max.): 600 mm, Automatically saw and split wood with the RM480-B from H&R. The H&R Log Splitter RM480-B is the ideal assistant for your firewood preparation. The new 2026 model impresses with state-of-the-art technology and high performance for efficient sawing, splitting, and conveying of firewood. Thanks to the innovative design and powerful hydraulic system, work with this splitting machine becomes significantly easier – perfect for professional forestry operations and ambitious DIYers. Unlike competitors, the RM480 from H&R features FULLY hydraulic operation for ALL functions, allowing the work to be completed faster and more easily. Product features RM480-B Performance: The splitter is equipped with a powerful 15 HP petrol engine (RM 480 B). Alternatively, it is also available with a 13 HP electric motor (RM 480 E). Log length and diameter: Logs up to 3 metres long can be securely placed on the sturdy standard table. The splitter handles logs up to 48 cm in diameter and cuts them to lengths up to 60 cm. Hydraulic system: The machine features a hydraulic saw bar. The hydraulic log clamp ensures secure fixation of the wood during the splitting process. Hydraulic height adjustment of the splitting cross is possible. You can choose between the supplied 4-way and 6-way splitting wedges – for flexible splitting patterns and individual adaptation to your needs. Conveyor belt: The newly designed 2.2 m feed belt facilitates log loading, while the laterally pivoting discharge belt makes transferring the split wood effortless. Mobile use: The splitter weighs only 750 kg including the trailer, and thanks to its practical transport frame, it can be moved by hand without difficulty. Easy operation: All functions can conveniently be operated hydraulically, making it suitable for extended operating periods. At a glance • Sawing, splitting, and discharge in one working step • All functions hydraulically controlled • Efficient, powerful engine • Splits wood up to 48 cm in diameter and 60 cm in length • Logs up to 3 m long (up to 6 m with accessory table!) Price Petrol engine (15 HP) RM 480 B (net) €7,385.71 Electric motor (13 HP) RM 480 E (net) €7,550.00 Additional options Fgjdpfou Dnrusx Ap Dsh With the optional lifting table or chain conveyor, logs up to 6 metres in length can be effortlessly processed. Technical details Weight (incl. trailer): 750 kg Freight cost: €300 (transported in steel frame, without hydraulic oil) Final assembly time: approx. 4 hours Max. log diameter to split: 48 cm Max. log length to split: approx. 60 cm Max. log length: 300 cm Engine: Petrol, 15 HP Displacement: 420 cm³ Engine oil: 10W30 Hydraulic oil: 46 Hydraulic connections and control levers are already preinstalled, so the machine is ready for operation within a very short time. Benefit from the powerful and well-designed technology of the H&R log splitting machine RM 480. Order today and make your firewood processing more efficient, safer, and more convenient!

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit -Hole: Ø 40 mm -Outer diameter: 180/220 mm -Reversible inserts -Tool No.: -Tool No.: 121212 Y22 -Tool No.: Number: 13 milling cutters Fedpfx Ajb A Hhnsp Dogh Price: complete -Weight: 150 kg

Condition: as good as new (ex-display), Year of construction: 2025, Technical data POWER UNIT 200 P • Intake nozzle diameter: 200 mm • Motor rated power: 2.9 kW; 400 V/50 Hz • Max. volume flow: 3010 m³/h • Rated volume flow: 2262 m³/h • Vacuum: 2174 Pa • Filter area: 13.7 m² • Filter cleaning: Compressed air cleaning • 2 collection containers (rolling containers): a. 241 liters • Dimensions (L x W x H): 2322 x 830 x 2050 • Weight: 320 kg Fjdpfx Asbpg Ncep Dogh • Design / operating side can be selected: right / left Location: In stock at Bitburg Top price for the showroom model

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: HS-14E, overall weight: 185 kg, total width: 135 mm, total length: 144 mm, total height: 228 mm, fuel: electricity, SCHORR Log Splitter 14t HS-14E PRO Where conventional electric splitters with 12 tons reach their limit, the HS-14E goes further: 14 tons of splitting force drive the splitting wedge through hardwood, dry and knotted logs, evenly and without jamming. The powerful hydraulic cylinder with a 9.5 cm diameter reliably delivers the pressure, stroke by stroke. Splitting is done vertically with a splitting length of up to 104 cm: meter-long logs fit with room to spare, as do shorter sections from 56 cm. This allows you to quickly work your way through the pile of logs, piece by piece. The most strenuous part of the splitting process is not the splitting itself, but lifting the logs. The HS-14E is equipped with an integrated log lifter specifically for this purpose: hook the log, lever it, and the section aligns itself effortlessly into the splitting position, without straining your back and shoulders. Fgodezwmypspfx Ap Doh When not in use, the log lifter serves as a stable protective bar on the machine. Operation is performed via the two-hand safety control, and the massive, robust design with a weight of 185 kg ensures a secure stand, even at full splitting force. The HS-14E does not require a tractor or a power take-off: the 400 V electric motor with 3.5 kW is connected to the standard 16 A socket and delivers its power quietly and without emissions. This allows you to split wood in the barn, in the hall, or on the farm, where gasoline engines would be disruptive and a tractor is not available. The technology is deliberately kept simple, robust, and repairable: hydraulics, steel frame, electric motor – no unnecessary frills. The HS-14E is delivered pre-assembled and with hydraulic oil already filled: simply connect it and start splitting. Wear and replacement parts are in stock, and we handle repairs in our own workshop. You buy directly from the manufacturer and receive personal advice. And for those who want to combine a power take-off and electric power, the HS-22PE with 22 tons is the larger model. Technical data -- Manufacturer: SCHORR -- Type: HS-14PE -- Splitting force: 14 t -- Weight: 185 kg -- Drive: 400 V electric motor (3.5 kW, 16 A) Dimensions: -- Length: 1440 mm -- Width: 1350 mm -- Height: 2280 mm -- Splitting wedge: 17.5 cm -- Splitting diameter: max. 30 cm / min. 10 cm Your advantages at a glance -- Ready for immediate use – no long waiting time -- Massive design – 185 kg weight for maximum stability -- Comfortable log lifter for heavy wood -- Spare parts always available -- Competent service & advice Whether delivery or collection in 48465 Schüttorf – we offer the right solution.

Condition: used, 4-bag dust extractor SIA 8/26 Fjdpfozkh Etsx Ap Dsgh

Condition: used, Year of construction: 2008, functionality: limited functionality, power: 150 kW (203.94 HP), nominal heat output: 250 kW (339.91 HP), heating capacity: 220 kW (299.12 HP), Fixed-bed wood gasification plant from Urbas. The system is operational. Scope includes engine and generator. The engine requires an overhaul. Also included is a valid EEG feed-in contract at 21.6 cents/kWh until 2028. A comprehensive stock of spare parts, such as side channel blowers, sensors, and pumps, is included. A second unit is provided as a parts donor. Fsdpfjyyzv Tox Ap Dogh

Condition: used, Dust separator, dust extractor, suction unit, dust cyclone, used equipment Overall Dimensions: Width: 1200 mm Depth: 600 mm Height: 1560 mm Fgsdoyzmihjpfx Ap Djh Inlet Size: 90 mm Outlet Size: 115 mm Equipped with a pneumatic valve

Condition: new, Year of construction: 2026, CORMAK LUP7TS WOOD SPLITTER is an electric log splitter with a 7-ton splitting force, designed for preparing firewood and fuel wood. The model handles logs up to 520 mm in length and up to 250 mm in diameter, making it well suited for home use. The device is equipped with a 230 V / 2200 W motor, a hydraulic cylinder with automatic return, two-hand operation, a safety cage protecting the working area, and a stand with wheels included in the set. Check the CORMAK LUP7TS if you need a compact 230 V wood splitter for regular firewood preparation at home. Applications of the CORMAK LUP7TS wood splitter The CORMAK LUP7TS wood splitter is suitable wherever firewood is prepared regularly, but there is no need for a large industrial machine or a version with a stand. Recommended applications: households farms homes heated with wood fireplace and stove users small firewood preparation points agritourism facilities and guesthouses workshops and utility areas users preparing seasoned and fresh wood The LUP7TS model is suitable for people who want to prepare firewood faster and more conveniently, reducing the effort of manual splitting. Who is the 7-ton wood splitter for? The CORMAK LUP7TS is a splitter for users who need a compact, easy-to-use device for firewood. The 7-ton splitting force, 230 V power supply, and compact design without a stand make it suitable for home use, farms, or small service points. It is a good choice for: homeowners heating with wood fireplace users farms preparing their own fuel people wanting to reduce manual splitting small businesses and facilities regularly using firewood users looking for easier storage than stand-mounted versions The CORMAK LUP7TS is equipped with a two-hand control system, which increases control over the splitting process. The operator uses both hands, reducing the risk of accidental contact with the working area. An additional safety feature is a protective cover for the working area. This is especially important when the splitter is used regularly and the operator wants a safer and more controlled working environment. Smooth adjustment of splitting gap The splitter has a smooth adjustment of the splitting gap, allowing better adaptation to the length of the wood being processed. This helps reduce unnecessary movement and speeds up the preparation of logs. Fgjdjzarv Aepfx Ap Deh This is particularly useful when working with repetitive pieces of wood, e.g. for fireplaces, stoves, or boilers. Standard equipment CORMAK LUP7TS hydraulic wood splitter Stand with wheels Hydraulic cylinder with automatic return Two-hand control system Protective cover for working area Log output table Stable splitting blade 230 V / 2200 W motor Powder-coated steel construction Technical parameters of CORMAK LUP7TS: Splitting force: 7 T Max. log diameter: 250 mm Max. log length: 520 mm Motor: 230 V / 50 Hz Motor power: 2200 W Power supply: 230 V Length: 950 mm Width: 325 mm Height: 510 mm Net / gross weight: 63 / 68 kg Warranty: 2 years

Condition: like new (used), Year of construction: 2025, NEW Bruks Re-Chipper DG-Re 600x1200 Throughput rm/h Motor capacity 315 kW Fodpfxjzhvvhj Ap Djgh Rotor diameter 1300 mm Rotor speed 530 min-1 Number of chipper knives 8 Number of counter knives 1 Chipping length < 10 mm Screen perforations R 680 mm x Qv 14/22 mm Vibro conveyor

Condition: used, Year of construction: 1979, Table dimensions 1300-800 mm Weight 4,7 to. Year 1979 Fodezhcizspfx Ap Dsgh x-travel 1000 mm angular milling head ja documentation ja serial number 733 weight of the machine ca. 4,7 t

Condition: good (used), Year of construction: 2006, radial fan, dust extraction blower, fan, extraction, dust blower, blower Fgsdpozwdn Defx Ap Djh -Manufacturer: Airheat, radial fan with soundproof housing -Type: RDH-500-11.0 -Volume flow rate: 20000 m³/h -Motor: Hoyer 15 kW 1460 rpm -Dimensions: see technical drawing in the photos -Overall dimensions: 1800/1110/H2900 mm -Weight: 584 kg

Condition: like new (used), Year of construction: 2015, Suction capacity without/with dust bag: 1800/1520 m³/h Spindle speed: 2800 rpm Fgjdpfxjzvm I Ds Ap Dsh Drive motor: 400 V, 0.75 kW

Condition: used, Year of construction: 1978, Weight 1,5 t serial number 4193 ja Fodpfxezxt Tlo Ap Dsgh vice ja x-travel 500 mm length 1200 mm width 1300 mm height 1789 mm

Condition: used, Year of construction: 1996, functionality: fully functional, Manufacturer: REINBOLD (Germany) Model: RHZR 1000 Type: Wood Shredder Motor: 18.5 KW Weight: 2470 kg Fsdpfoy Nw Idjx Ap Degh Size: 3140 x 2265 x H 2310mm Only 300 working hours, good condition, connected, can be inspected. Rotor 250 mm with 26 knives Screw conveyor to eject chopped scraps

Condition: used, Year of construction: 2022, Machine is in perfect condition in small woodoworking shop. Fedpjy S U Dujfx Ap Dogh

Year of construction: 2026, condition: new, DESCRIPTION Horizontal drum chipper, engineered and built for maximum performance and reliability. This heavy-duty, robust machine is suited for the most demanding conditions and is ideal for processing all types of waste wood materials. The Varli VDC-1600 drum chipper features a large infeed opening, making it highly capable of processing waste wood material, logs, and wood bundles (diameters over 700 mm can be easily accommodated). The VDC-1600 can achieve outputs of approximately 100,000 kg per hour of high-quality pulp mill chips or finer fractions suitable for biofuel production. The chipper can also deliver coarser fractions, producing chips up to 200 mm in length (depending on configuration). Built with a heavy-duty frame, the chipper features over-sized, self-aligning bearings housed in steel casings, firmly secured to the chipper’s side structure for long service life and reliable operation. Equipped with 14 feed rollers fitted with special, wear-resistant, surface-hardened teeth, the VDC-1600 provides secure feed and optimised material throughput. The chipper comes standard with drum-mounted cutting tools made from Hardox, along with replaceable wear plates. Fgsdjyi H Ryspfx Ap Doh OPERATING PRINCIPLE The VDC-series is designed to produce wood chips from logs or bark bundles. Material is horizontally fed by vibrating chute into free-floating feed rollers, which automatically adjust to the material’s height. The feed rollers securely grip and transport the material into a high-speed rotating drum armed with solid knives, fixed with centrifugal wedges—fostering durability, preventing knife damage, and minimizing downtime during tool changes. The rotor knives are easily accessible and can be re-sharpened multiple times. Key features include an adjustable stator knife, hydraulic hood, and hydraulic device for stator knife exchange. BENEFITS - Extremely robust construction and heavy-duty design for stable operation - Centrifugal wedge knife mounting for reduced machine downtime - Adjustable stator knife to extend operating life - Hydraulic hood for swift and easy maintenance TECHNICAL DATA Model: VDC-1600 Infeed Width: 1250 mm Rotor Diameter: 1600 mm Number of Infeed Rollers: 14 Number of Cutting Tools (Knives): 4 Drive Motor(s): 2 x 400 kW Electrical Supply: 400V, 3Phase, 50Hz Fraction Output: 60 mm (SPF), approx. 100,000 kg/h Total Weight: 96,000 kg

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,675 mm, travel distance Z-axis: 1,080 mm, number of slots in tool magazine: 4, total height: 2,354 mm, total length: 3,800 mm, total width: 3,050 mm, Equipment: CE marking, PADE TARGET – 5-Axis CNC Machining Centre with Additional C Rotary Axis Manufacturer: PADE, Italy Model: TARGET Year of manufacture: 2006 Condition: Used, fully operational Availability: Available for delivery November–December 2026 Technical specifications • 5 simultaneous CNC machining axes + additional controlled C rotary axis • Axes: X / Y / Z / A / B + C • C-axis rotary table usable during machining • X-axis travel: 1,600 mm • Y-axis travel: 1,675 mm • Z-axis travel: 1,080 mm • A-axis rotation: 360° • B-axis rotation: ±90° • Maximum working area: 1,600 × 1,100 mm Fgodozx S Afjpfx Ap Djh • Machining head with 4 independent electro-spindles • Electro-spindles with ceramic bearings • Revolving machining head for rapid spindle/tool selection • Adjustable workpiece supports and clamping system • Suitable for routing, profiling, drilling, boring, mortising and tenoning • Particularly suitable for complex and curved solid-wood components, including chair, table and furniture parts Control system • Original WINMEDIA 93000635J industrial PC has been replaced by a standard PC • Machine is fully operational in its current configuration • Available for demonstration in operation prior to dismantling Machine description The PADE TARGET is a versatile CNC machining centre designed for complex machining of solid-wood components, particularly chair, table and other shaped furniture parts. The machine combines simultaneous 5-axis machining with an additional controlled C rotary axis, which can also be used during the machining process. Together with four independent electro-spindles, this configuration provides high flexibility for machining complex three-dimensional components from multiple orientations. The machine is in fully operational condition and is currently installed and in use. The original WINMEDIA 93000635J industrial PC has been replaced by a standard PC, and the machine operates normally in its present configuration. The machine can be inspected and demonstrated under in our production plant in Laktasi, Bosnia and Herzegovina. Available for delivery: November–December 2026.

Condition: new, Year of construction: 2025, Wood chips are a common by-product generated by woodworking companies during the manufacturing process. Due to low options for realization wood chips are usually discarded by selling it to heating plants for a low price. Our MM-2000 hammer mill allows companies to turn wood chips into briquettable sawdust by shredding and crushing it through metal screens also known as sieves. Quick-release hatches allow quick and easy access for maintenance while keeping workers safe. Blades of the machine are not fixed and spin freely due to the centrifugal principle. This means that blades take less damage on impact and have an extended lifetime. Fixed blades can be ordered if required for specific produce. The mill can be ordered to fit various produce and applications ranging from reducing biomass waste to spice production, chemical and mineral. The perforated sieves and blades are easily interchangeable to adjust for different types of materials and purposes. Free test-mill of material is available on demand. Capacity depends on material Fjdpfxefh R I Aj Ap Dsgh Dimensions 1765x960x1060mm. Weight 996 kg. Power 30/37/45kW, 50Hz, 380V.

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, We offer for sale a high-quality UNTHA LR 1000 industrial wood shredder, in almost new condition, having been used only for approximately 1 hour of testing operation. This machine is a reliable and efficient solution for processing wood waste such as offcuts and solid wood materials, delivering consistent output size and excellent performance. Key Features & Benefits Condition: Practically new – only test run (~1 hour) Brand: UNTHA (Austria – premium shredding technology) Model: LR 1000 Robust industrial design for long-term operation High throughput capacity: approx. 600–700 kg/h (beech offcuts) Uniform output size: approx. 40 mm (30 mm screen installed) Ideal for woodworking companies, carpentry shops, and recycling operations Technical Specifications Material Input Max. input size: approx. 600 × 120 × 55 mm Feed system: tipping box approx. 1.0 m³ Moisture content: < 11% Metal content: not allowed Machine Performance Main drive: 2 × 18.5 kW Fgjdpfx Apjzgr Hte Doh Hydraulic power: 1.1 kW Rotor speed: 98 rpm Throughput: approx. 600–700 kg/h Cutting System Rotor diameter: 300 mm Number of knives: 27 pcs Cutting system: UNTHA cutter system Screen size: 30 mm Electrical & Control Voltage: 400 V / 50 Hz Control system: Siemens SIMATIC S7-1200 (CPU 1214) Dimensions & Weight Machine dimensions: approx. 1,704 × 1,863 × 1,630 mm Infeed opening: 1,000 × 1,050 mm Total weight: approx. 2,400 kg Included Equipment 45° machine configuration (improved feeding of bulky material) Horizontal discharge screw conveyor (closed design) Full bin indicator with automatic stop Machine support legs (~100 mm) External interface contact

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18133-00 12632868, input voltage: 400 V, Nederman ventilation unit for extraction of paint dust, oil mist, and contaminated air Fsdpjw Hw Dgjfx Ap Dogh

Condition: good (used), Year of construction: 2010, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum TEKA AIRTECH P18. The main areas of application for these systems are industrial plants/welding shops where it is not possible to implement point extraction or where point extraction is insufficient to maintain air quality in the workshop. Side-mounted ducts with a pollution capture point draw in contaminated air and direct it to the filter section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses clean the cartridge filters automatically at required intervals. After the compressed air hits, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the workshop towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, which results in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. Fgjdpfx Apeib Dade Djh The AIRTECH series of devices is certified by IFA in accordance with EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent, local welding fume extraction unit. Parameters: Capacity - 18,000 m3/h Motor power - 11 kW Vacuum - 2250 Pa Filtration area - 324 m2 (9 filter cartridges, each 36 m2) Fan in a sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of manufacture - 2010 Dimensions: Height - 5.00 m Base width - 1.44 m x 1.44 m Width with outlet ducts - 8.5 m Total weight approximately 2400 kg

Condition: excellent (used), Year of construction: 2003, Wood chipper Manufacturer: Weima Type: WL 4 Year of manufacture: 2003 Operating hours: approx. 1,244 h Power: 18.5 kW Hopper: 600 x 800 mm Rotor diameter: 252 mm Fgedpfxoz Ai N Re Ap Doh Screen diameter: 15 mm Number of knives: 14 Rotational speed: 90 rpm Weight: 1,300 kg

Condition: new, Year of construction: 2023, power: 7.5 kW (10.20 HP), intake manifold diameter: 300 mm, Exhibition machine, year of manufacture 2023 Technical data DM-300/P-B Motor power 7.5 kW Nominal volume flow 20 m/s, 5089 m³/h Max. air volume flow 6000 m³/h 2700 Pa at 20.5 m/s in dusty conditions Filter area 31.8 m² Filter cleaning: JET cleaning system Residual dust content: less than 0.1 mg/m³ Dust collection volume: 480 liters Sound pressure level: 70 dB(A) Power supply: 400V/50Hz Nominal current: 14.0 [A] 5 m connection cable with 32A CEE plug, 5-pole, with phase inverter Weight: approx. 780 kg Dimensions (L x W x H), max. 3245 x 1030 x 2595 mm Includes extraction nozzle Fsdpfxez At Nhe Ap Djgh Extraction nozzle with flange, 300 mm (left) With extinguishing system (no water connection required)