Used Wood Machining Center for sale (75,606)

Condition: used, Year of construction: 2009, operating hours: 6,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC530, spindle speed (max.): 36,000 rpm, GF Mirkon XSM600U X: 800 Y: 600 Z: 500 A: +30/-100 degrees C: 360 degrees continuous HSK50 spindle: max. 36,000 rpm, 25 kW HR410 handwheel 60-station tool changer Hsdpfxswa R A Ns Aabsnu Rotary table including 3R clamping system Chip conveyor Coolant system with 20 bar internal coolant supply Blum laser tool measurement M&H 3D probe Pallet automation with 21 pallets - the pallets are not included in the scope of delivery This machine is offered on a customer order basis!

Condition: like new (used), Year of construction: 2018, operating hours: 11,300 h, functionality: fully functional, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, controller model: itnc 530, workpiece weight (max.): 1,600 kg, table load: 1,600 kg, rotary table diameter: 1,100 mm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 11,000 h, coolant supply: 80 bar, number of slots in tool magazine: 30, MIKRON HPM 1350U, 2018, machine is under service contract, fully functional under power. IKZ 80 BAR, Renishaw probe, laser measuring, kinematic OPT, OSS cycles. Geometry report available Hodpfsv Ibtcsx Aabenu

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,256 h, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, table load: 250 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 710 mm Travel Y-axis: 400 mm Travel Z-axis: 350 mm Table dimensions: 850 x 400 mm Max. table load: 250 kg Table height from floor: 850 mm Spindle speed: 12,000 rpm Spindle taper: BBT 30 Main spindle power: 13 kW Rapid traverse (X, Y, Z): 60 m/min Max. tool diameter: 68 mm Max. tool length: 200 mm Max. tool weight: 3.0 kg Tool change time: 0.9 s Max. number of tool stations: 20 MACHINE DETAILS Control: FANUC 0i-MF Dimensions (L x W x H): 2,100 x 2,600 x 2,700 mm Machine weight: 3,150 kg Operating hours Machining time: 2,256 h Run time: 3,557 h Control on: 24,690 h EQUIPMENT Automatic door Keyarrow chip conveyor Hnsdoxlf Nrspfx Aabsu

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,510 h, functionality: fully functional, machine/vehicle number: 11670000823, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 180, TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 800 mm Hjdpsxf Htxofx Aabsnu Z-axis travel: 800 mm Drive: Variable-speed asynchronous motor with liquid cooling Control: Sinumerik 840D powerline Work spindle Tool holder: HSK-A63, hydraulic-mechanical tool clamping Spindle speed: 0 – 10,000 rpm, continuously programmable Feed Drive: AC brake motors on the X, Y, Z, and B axes Feed range on the X, Y, and Z axes: 0 – 60,000 mm/min Rapid traverse on the X, Y, and Z axes: 80 m/min Measuring system Resolution on the X, Y, and Z axes: 0.001 mm Position tolerance on the X, Y, and Z-axis: 0.008 mm Pallet Number: 2 Size: 630 × 630 mm Hole pattern: 108 × bushing Ø 16.02 H6 Centering bushing: Ø 16.02 H6, 38.5 mm deep NC rotary table Max. tabletop rotation: 30 rpm Tabletop holding torque at 40% duty cycle: 5,000 Nm Tabletop holding torque at 100% duty cycle: 3,250 Nm Workpiece weight Per pallet: max. 800 kg Difference with different loads: max. 800 kg Tool magazine Type: Vertical chain magazine HSK-A63 Positions: 180 Tool changing system: Double gripper Max. tool diameter standard: 80 mm Max. tool diameter with free adjacent positions: 160 mm Max. Tool length from spindle nose: 550 mm Max. tool weight: 12 kg Max. magazine load: 630 kg MACHINE DETAILS Space requirement: 6.0 x 6.0 m Height: 3.2 m Weight: 18 t Power requirement: 71 kVA Machine dimensions: approx. 4.7 x 5.6 x 3.2 m EQUIPMENT - Internal coolant supply - Chip conveyor - Belt filter system - Cooling unit - Rotoclear - Tool breakage detection (laser) - Mist separator - Measuring probe - Handheld control unit - Flushing gun - Blow-air cooling system - 4-color signal lamp - Dynamic package

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 150 mm, TECHNICAL DETAILS Working area: 3,680 x 1,260 x 150 mm Milling motor: 1 unit, 8.5 kW (11.5 HP) Tool changer: 1 automatic rotary magazine with 12 positions Drill beam: 18 vertical, 8 horizontal drills, and 1 "X" saw drill Hnjdpfx Aaexg Izaebeu Software: DXF compatible Safety standard: BUMPER protection, CE standards Weight: 3,000 kg Note: The machine has a software issue and does not include a pump. The estimated cost for correction is approximately €3,000 each.

Condition: like new (used), Year of construction: 2019, operating hours: 253 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, table load: 600 kg, spindle speed (max.): 12,000 rpm, Machining centre from year 2019 with only 253 cutting hours! TECHNICAL DETAILS Travels Hnedexlip Njpfx Aabsu Travel X: 800 mm Travel Y: 450 mm Travel Z: 510 mm Rapid traverses Rapid traverse X: 36 m/min Rapid traverse Y: 36 m/min Rapid traverse Z: 30 m/min Worktable Worktable dimensions: 1,000 x 450 mm Maximum table load: 600 kg Spindle Head: 12,000 rpm BT 40 Tool changer: 30 positions Rotary axis 4th axis: Tsudakoma Rotary axis diameter: 160 mm MACHINE DETAILS Control: Fanuc iSeries Operating hours Cutting hours: 253 h Operating hours: 300 h EQUIPMENT Chip conveyor

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 131057, overall weight: 6,900 kg, number of axes: 3, Equipment: chip conveyor, cooling unit, TECHNICAL DETAILS Number of axes: 3 Tool changer: 30 positions Control: SIEMENS Sinumerik 828D Hnedpjxlcgnofx Aabou MACHINE DETAILS Machine weight: 6,900 kg EQUIPMENT Chip conveyor Cooling units

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100001570, travel distance Z-axis: 180 mm, table width: 1,620 mm, table length: 5,510 mm, rapid traverse X-axis: 56 m/min, rapid traverse Y-axis: 56 m/min, TECHNICAL DETAILS Processing table dimensions (L x W): 5,510 x 1,620 mm Z-axis travel distance: 180 mm Hnedjxmgr Ropfx Aabou Maximum vectorial rapid traverse speed X/Y-axis: 56 m/min Spindle unit speed: 4,000 rpm Tool changer slots: 44 Connection diameter: 250 mm MACHINE DETAILS Dimensions & Weight Dimensions: 9,700 x 5,020 x 2,650 mm (LxWxH) Net weight: 5,000 kg Spindle unit motor power: 5.5 kW Air consumption: 4,430 m³/h Air velocity: 25 m/s Voltage: 400 V / 50 Hz EQUIPMENT PRO-Speed safety system TEPCAD control panel with touchscreen color display Linear tool changer TBR14 Linear tool changer FAST14 Air blower on the electrospindle XY-axis safety guard Vacuum pump 150/300 m³/h 5-axis unit ‘JQX’ version 13.5 kW Fixed pedestal: 145 x 145 H=75 mm Rotatable gondola: 145 x 55 H=75 mm Clamp for 8 rails TV FLEX / TV FLEXDRIVE / TV FLEXMATIC MULTIGRIP 90 round clamp (H83) for TV FLEX / TV FLEXMATIC Maestro connect 1 year (including Gateway Kit plug & play) SCM DIGITAL SOLUTIONS: MAESTRO CONNECT MAESTRO ACTIVE software for human-machine interface (HMI) Maestro software for CNC programming Hardware key for Maestro CNC Advanced Maestro 3D module Additional key for Maestro CNC (USB connection) Windows 10 embedded 64-bit operating system Console with integrated PC eye-M PRO

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Travels Hsdoxlf D Nspfx Aabenu X-axis: 760 mm Y-axis: 530 mm Z-axis: 560 mm Speeds Rapid traverse: 40 m/min Spindle Speed: max. 12,000 rpm Power: max. 25 kW Tool magazine and table Tool magazine positions: 30 Table size (L × W): 900 × 500 mm EQUIPMENT Including chip conveyor Including slant bed filtration system Including zero-point clamping system Including 4th axis Rotamatik 120 New Däublin

Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,756 h, functionality: fully functional, machine/vehicle number: 16252, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: FANUC 30i, workpiece weight (max.): 250 kg, TECHNICAL DETAILS Travel X-axis travel: 500 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Work Table Pallet size: 300 x 300 mm Max. workpiece weight: 250 kg Rotary table: 360° x 0.001° Minimum/maximum spindle to table center distance: 120/620 mm Minimum/maximum spindle to table surface distance: 80/580 mm Max. workpiece size: 500 x 500 mm Spindle speeds: 50 - 15,000 rpm Spindle taper: ISO 40 Spindle drive power: 15/7.5 kW Feed rates X/Y/Z: 1 - 50,000 mm/min Rapid traverse: 50 m/min Rapid traverse B-axis: 33.3 rpm Hodpfxsxnwy Is Aabsnu MACHINE DETAILS Control: FANUC 30i Total connected load: 38 kVA Weight: 10,000 kg Operating Hours Running time: 15,756 h Control on-time: 116,776 h

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS X-axis travel: 1,050 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Hjdpfx Aoxltdkeabsnu Spindle speed: 8,000 rpm Tool holder: 24 positions MACHINE DETAILS Machine weight: 7,200 kg

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, workpiece diameter (max.): 500 mm, rotational speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel paths: X-axis: 510 mm Y-axis: 510 mm Z-axis: 460 mm Workpiece dimensions: Maximum diameter: 500 mm Maximum height: 405 mm Table: Number of tables: 1 Table diameter: 500 mm Table width: 400 mm Maximum table load capacity: 300 kg Number of T-slots: 5 T-slot width: 80 mm Reference slot: 50 mm Table height: 800 mm Distance spindle nose – table, max.: 650 mm Distance spindle nose – table, min.: 190 mm Distance spindle nose – table center, max.: 600 mm Distance spindle nose – table center, min.: 140 mm Speeds: Rapid traverse X-axis (max.): 50 m/min Rapid traverse Y-axis (max.): 50 m/min Rapid traverse Z-axis (max.): 50 m/min Feedrate X-axis (max.): 50 m/min Feedrate Y-axis (max.): 50 m/min Feedrate Z-axis (max.): 50 m/min Spindle: Maximum speed: 12,000 rpm Hedpfx Aoxldrxsabenu Minimum speed: 35 rpm Spindle motor (15 min): 22 kW Spindle motor (continuous): 15.0 kW Maximum tool diameter with adjacent tool: 80 mm Maximum tool diameter without adjacent tool: 125 mm Maximum tool length: 300 mm Tool change time (C/C): 4.5 s MACHINE DETAILS Electrical supply: Power (30 min): 66.6 kVA Power (continuous): 49.9 kVA Compressed air supply: Pressure: 500 kPa Flow rate: 200 l/min Cooling system: Total tank volume: 300 l Dimensions & Weight: Dimensions (L x W x H): 3,015 x 2,805 x 2,964 mm Weight: 7,600 kg EQUIPMENT Operator door lock with switch Full enclosure Top cover Transformer for Europe (CE) Ball screw cooling (X, Y, Z) Automatic tool measurement & Mazatrol PC-FUSION-CNC 640M 5X control Additional variables (600) Mazak Tornado thread cutting-drilling Mazatrol Mazak Tornado thread cutting-drilling (EIA) Intersection calculation between 2 lines Zero offset Reverse execution of commands G37 automatic tool length measurement Sequence comparison function RS-232C interface Mazacc 2D high-speed software Additional coordinate system (G54.1) Thread cutting function Machining navigation – forecast Machining navigation – control Machining navigation – results PCMCIA interface (2 slots) IC memory card interface Complete coolant system Lighting Manuals Note: The machine has not been used for 2 years, but was running smoothly up to that point. Pallets are included in the scope of sale and delivery. Tools and tool holders are not included in the scope of sale and delivery.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 435.046, workpiece weight (max.): 75 kg, workpiece height (max.): 60 mm, rotational speed (max.): 20,000 rpm, workpiece length (max.): 5,600 mm, working width: 1,300 mm, TECHNICAL DETAILS Working width: 1,300 mm Workpiece dimensions Hodpfx Aexnyn Ijabsnu Workpiece width (X): 60 - 1,300 mm Workpiece thickness (Z): 6 - 60 mm Workpiece length (Y): 263 - 5,600 mm Workpiece weight: max. 75 kg Drilling spindles: 13 vertical, 6 horizontal in Y, 2 horizontal in X Grooving unit: 1 in Y Milling unit motor power: 5.5 kW (S1) Speed range: 1,000–20,000 rpm Tool holder: HSK63F Maximum cutter length: 130 mm MACHINE DETAILS Electrical connection: 400 V, 3 phases, 50 Hz, 12 kVA, 17.5 A Air supply: 7 bar EQUIPMENT Counter-pressure device for 1,300 mm working width Foldable roller table 765 mm for front and rear of the machine, width 500 mm Auxiliary stop 600 mm with integrated rollers for roller tables Additional safety device with lamella curtain Extraction distributor: ∅ 160 mm / ∅ 80-80-80 mm, spacing 196 mm Documentation

Condition: new, Year of construction: 2025, New protective cover for Haas machines, VF-3, Z-axis. If necessary, we can check dimensions and produce other protective covers. I am ready to ship this and other protective covers to you globally. Hnedow Tkwrspfx Aabeu Also we have protective covers for DMG 635

Condition: excellent (used), Year of construction: 2015, DMG MORI UNIVERSAL MACHINE CENTER DMU70 – Full 5 axis VMC Year 2015 Control : Siemens 840D SL Travel : X 700 Y 600 Z 520mm Swivel Rotary Table for Simultaneous Machining Table Ø800 x 620mm Spindle 18,000rpm ATC 30 – HSK-A63 Direct Measuring System – All Axis Hodoxgpvxspfx Aabonu Touch Probe Heidenhain TS649 Laser Tool Measurement 3D quick Set Signal Light Electronic Hand-wheel

Condition: ready for operation (used), Year of construction: 2004, operating hours: 5,238 h, functionality: fully functional, machine/vehicle number: 120007, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, controller model: Heidenhain TNC530, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Hsdpfoxnwxqex Aabonu Travel X: 1,200 mm Travel Y: 700 mm Travel Z: 750 mm Maximum spindle speed: 8,000 rpm MACHINE DETAILS Control: Heidenhain TNC530 Electrical data Operating voltage: 400 V / 50 Hz Control voltage: 24 V Power: 35 kVA Rated current: 50 A Main fuse: 6.3 A Operating hours Spindle hours: 5,238 h Control on-time: 17,705 h

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 813 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 711 mm, rotational speed (max.): 12,000 rpm, spindle speed (max.): 12,000 rpm, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: AC, Equipment: rotational speed infinitely variable, Haas EC500 2008 Traverses X Y Z; 813 x 508 x 711mm, Pallet size 500 x 500mm, number of pallets 2 , Maximum workpiece weight 300 Kgs, spindle power 40Hp, spindle speed 12,000 rpm, Hnjdpsxmlizefx Aabju 40 tools , spindle taper BT40, Through spindle coolant, under power Location in Israel

Condition: used, Year of construction: 2014, Opportunity to buy a DMG vertical machining center from 2014 in very good condition, with 23571 spindle hours. Immediately available for delivery (in Europe as well). Extra: Direct measuring system X, Y, Z - inclusive air purge for measuring system Hnedpow Spqhofx Aabou Electronic handwheel Active cooling unit for electrical cabinet additional ventilator for control panel actice cooling unit for motor spindle Video available on request. X-AXIS Movement 635 mm Y-AXIS Movement 510 mm Z-AXIS Movement 460 mm Tabel dimensions 790 x 560 mm Max spindle speed 12000 rpm Tool changer 20 places Tool taper SK40 Cnc Control Heidenhain TNC620 - Slimline panel Tool clamping BT40 , for pull studs DIN69872 Spindle hours 23571

Condition: used, Year of construction: 2012, Machine Designation: Vertical Machining Center LCV-760 (Moving Column Type) Manufacturer: LEADWELL CNC Machines Mfg. Corp., Taichung, Taiwan Type / Model: LCV-760 Control System: FANUC Oi-MD Technical Specifications • Working Area / Travels: - X-axis travel: 760 mm - Y-axis travel: 610 mm - Z-axis travel: 610 mm - Distance from table (pallet) top to spindle nose: 150 – 760 mm - Distance from column front to spindle center: 718 mm - Table dimensions: 850 × 600 mm - Maximum workpiece weight: 400 kg - Table configuration: M16 × P2.0 mm T-slots - Table height (floor to table top): 1,033 mm • Spindle / Drive: - Spindle speed: 10,000 rpm (optional: 12,000 rpm) - Spindle drive motor: 18.5 / 24 kW (30 min / continuous duty) - Maximum spindle torque: 95 Nm (67.5 ft-lb) - Spindle taper: 7/24 TAPER No. 40 (BT-40) - Spindle bearing inner diameter: 70 mm - Tool clamping force: 1,200 kgf - Transmission: HT.D belt drive - Spindle oil chiller: included - Rigid tapping: standard • Feedrates: - Rapid traverse (X / Y / Z): 32 / 32 / 32 m/min - Cutting feedrate: 10 m/min - Jog feedrate: 2,500 mm/min • Automatic Tool Changer (ATC): - Type: Arm-type changer - Tool capacity: 30 tools - Tool taper: BT-40 - Retention knob: MAS P40T-1 (JIS B-6339) - Max. tool diameter (adjacent): 80 mm - Max. tool diameter (free): 100 mm - Max. tool length: 250 mm - Max. tool weight: 7 kg - Tool change time (tool-to-tool): 2 s - Chip-to-chip: 6 s • Automatic Pallet Changer (APC): - Number of pallets: 2 - Change method: hydraulic swapper - Pallet change time: 12 s • Motors: - Spindle motor: 18.5 kW (24 HP) - X-axis feed motor: 4.5 kW (6.4 HP), 30 Nm torque - Y-axis feed motor: 4.5 kW (6.4 HP), 30 Nm torque - Z-axis feed motor: 3.88 kW (5.4 HP), 22 Nm torque - Hydraulic pump motor: 3 kW - Lubrication pump motor: 0.01 kW - Coolant pump motor: 0.76 kW • Guideways: - X-axis: SNS45C2SSCOEx3 (600 mm width, 1,000 mm distance) - Y-axis: SNS45LC2X151SLHx2 (600 mm width, 600 mm distance) Hsdpfxjxnlhgj Aabonu - Z-axis: SHS45R2SSCOEx1305×2 (500 mm distance) • Utilities / Connections: - Power supply: 45 kVA - Compressed air: 0.6 MPa (87 psi), 400 L/min - Hydraulic oil tank: 400 L - Lubrication tank: 2 L - Coolant tank: 300 L • Dimensions / Weight: - Machine height: 2,885 mm - Machine footprint: 3,510 × 2,410 mm - Machine weight: 9,200 – 9,500 kg (approx. 10 t) lifting requirement • Cutting Capacities: - Milling: 230 cm³/min - Drilling: Ø 40 mm - Tapping: M30

Condition: excellent (used), Year of construction: 2014, DMG MORI DMC 635V ecoline Year Built 2014 Control : Heidenhian Spindle 12,000rpm Taper : BT40 ATC 30 Hedjxgk Nmepfx Aabenu Immediate Delivery

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 121162, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 415 mm, table load: 200 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel paths X-axis: 550 mm Y-axis: 400 mm Z-axis: 415 mm Work table Work table size: 550 x 400 mm Table load capacity: 200 kg Spindle Max. spindle speed: 12,000 rpm MACHINE DETAILS Number of axes: 5 Weight: 4,600 kg Electrical data Power supply: 220 V, 3 phase Frequency: 50/60 Hz Hnedjxnwvpspfx Aabju Rated power: 16.0 kVA Max. power: 32.0 kVA EQUIPMENT 2 pallets

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, DMG UNIVERSAL MACHINE CENTER DMU80P hi-Dyn Year 2001 X800 Y700 Z 600mm Heidenhain iTNC530 NC Rotary Table Ø900x630mm NC B axis Milling Head Hnedjw A Dy Tepfx Aabsu Spindle 18,000rpm ATC 180 – HSK-A63 Roto Clear window Spindle thru' coolant 40 bar Cheap sales - 50.000,00 USD

Condition: ready for operation (used), Year of construction: 2008, operating hours: 15,289 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 121, TECHNICAL DETAILS Travel Paths X-axis travel: 750 mm Y-axis travel: 800 mm Z-axis travel: 850 mm Hnedpfxsxnwq Hj Aabeu Work Table (axis operated by AC servo motor) Pallet size: 550 x 550 mm Smallest indexing increment: 0.001 degrees Spindle Tool taper: #50 Drive power: 30/22 kW Spindle speed: 15,000 rpm Tool Magazine Tool stations: 121 tools Magazine type: Chain magazine Specification: BT-50 MACHINE DETAILS Control: FANUC 31i Installation dimensions (L × W × H): approx. 2,780 × 1,500 × 2,300 mm Operating Hours Running time: 15,289 h Control On-Time: 106,856 h EQUIPMENT Coolant system Renishaw infrared tool probe OMP 60 BT 50

Condition: excellent (used), Year of construction: 2014, operating hours: 11,440 h, DMG 5 axis Simultaneous HSC 30 Linear Hodpfxsw Hxiwe Aabenu Year 2014 Heidenhian TNC640 Control Travel X320 / Y 300 / Z280mm B axis +/- 120 degree C axis 360 x 0.001 degree HSK-E40, 40,000rpm Swivel rotary table Touch Probe BLUM Tool Measuring system 3D Quick Set Application Tuning Cycle Air Blast through spindle Super Fine filter system c/w tooling ----- Clearance Sales -----

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 40543, travel distance X-axis: 425 mm, travel distance Y-axis: 425 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 100, TECHNICAL DETAILS X-axis: 425 mm Y-axis: 425 mm Z-axis: 400 mm Pallet size: 300 x 300 mm Feed Rapid traverse: 36,000 mm/min Cutting feed: 0–10,000 mm/min Tool magazine capacity: 100 ATC Spindle speed: 10,000 rpm Tool diameter: 95 mm Maximum tool length: 350 mm Maximum tool weight: 10 kg Max. tool weight (with tool holder): 10 kg Tool change time: 1.7 s Chip-to-chip time: min. 7 s Control: Fanuc 15M Pallet indexing: Full 4th axis MACHINE DETAILS Dimensions (L x W x H): approx. 3,690 x 4,614 x 2,475 mm Connected load: 20 kVA Hnodpfxjxnwkgj Aabou Phases: 3 Frequency: 50/60 Hz EQUIPMENT - Chip conveyor - Through-spindle coolant Note: There are 40 pallets currently mounted on the robot. Spare pallets are also available.