Used Wood Planing Machine for sale (66,698)

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- Rjdpsu R Sxxofx Afhocd ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: ready for operation (used), Planing machine 420 x 250 mm Feed rate, continuously variable, 15 - 90 m/min Grooving saw unit located at the infeed of the machine Planing spindle (bottom) 15 kW Planing spindle (top) 22 kW This planing machine was originally purchased new in 1984 as a four-sided machine. Rcsdpfx Aozmmrdsfhod However, the vertical milling units have been removed. OPTIONAL, and at an additional cost: machine with 2 vertical milling units. The machine is located in a soundproof enclosure.

Year of construction: 1991, condition: used, Used machine Year of manufacture: 1991 With 4 sanding units Workpiece dimensions: Thickness min. 10 mm max. 150 mm Width min. 10 mm max. 180 mm Length min. 190 mm, max. unlimited Abrasive belt dimensions: 200 x 1800 mm Extraction ports 2 extraction ports 80 mm 4 extraction ports 120 mm Required air velocity: 30 m/sec L x W x H: 3400 x 1150 x 1805 mm Weight: 2400 kg Availability: short term Location: Odenwald Redow Tfxdopfx Afhscd

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. All components assembled, pre-lubricated including test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Control relay for automatic actuation of the existing extraction system. Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Tool length sensor for determining tool length and active offset of the reference point. High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be adapted as needed) Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Rjdpfx Afexc Rmqshscd Availability: short notice Location: Flörsheim

Condition: used, Surface planer Rcodpfx Afoyid Uyohed available in 2-sided or 4-sided configuration REX HOMS Working width max. 2050 mm Working height max. 310 mm including swivel ring The 8 images show a REX HOMS 2050 in water blue color which was refurbished and delivered by jöma some years ago and serves as an example.

Condition: used, Year of construction: 1979, Table dimensions 1300-800 mm Weight 4,7 to. Year 1979 x-travel 1000 mm angular milling head ja Redpfx Afezhcizohecd documentation ja serial number 733 weight of the machine ca. 4,7 t

Condition: like new (used), Year of construction: 2021, machine/vehicle number: 1000042824, We are offering for sale a very well-maintained Biesse BREMA EKO 2.2 machine from 2021. The machine includes tool changing, two drilling units, and a set of tools. Rodpfxozcrfps Afhecd Software: bSolid. The machine has been serviced by our technician, so we are very familiar with its condition and history. The machine can be tested at our showroom in Brno.

Condition: used, Year of construction: 1985, Working width: 180 mm Working height: 120 mm Number of working spindles: 4 Spindle arrangement: bottom, right, left, top Motor power, bottom spindle: 3.7 kW Rcedpfx Ajzdzbnofhod Motor power, right spindle: 3.7 kW Motor power, left spindle: 3.7 kW Motor power, top spindle: 5.5 kW Adjustment, bottom spindle: - Adjustment, right spindle: - Adjustment, left spindle: handwheel Adjustment, top spindle: electric Planer heads: reversible knives Feed rate: 2 Feed roller pressure: spring-loaded Power consumption: 38 A Motor brake: automatic Dust extraction connection: Machine length: Machine width: Weight:

Condition: used, Working width: 630 mm Planer cutterhead: Strip cutter Number of cutters: 4 Feed table length: 2600 mm Feed table adjustment: Handwheel Chip removal indicator: Scale Adjustable angle of the feed fence: yes Motor power: 4 kW Redpfezdzaqox Afhscd Machine length: 2600 mm Machine width: 1000 mm Weight: 880 kg

Condition: ready for operation (used), KUPFERMÜHLE – DOMA-g-1620-V44 Four-sided planer Working width max. 1620 mm Planing height, 2 sides max. 300 mm Planing height, 4 sides max. 240 mm (OPTIONAL: conversion to 300 mm) Rcodpfx Ajzlbz Rjfhsd Feed rate in 6 stages 4.5 - 26 m/min Total electrical power 91 kW 4 horizontal planing shafts bottom right 11.0 kW bottom left 15.0 kW top right 18.5 kW top left 18.5 kW 2 vertical milling heads, 7.5 kW each with mounted aluminum planing heads H 240 mm

Condition: new, Year of construction: 2026, HOT AIR GENERATOR by wood model F28 - F55CV - F85CV - F120CV - F240CV NEW machines in prompt delivery for machines in prompt delivery we grant you Price List year 2024 -35% OFF . Promotional Sumer 2026 CE regulation: YES EC Declaration of Conformity: YES Instruction manual: YES Indicative surface to be heated F28 : sqm. 100/150 Indicative surface to be heated F55CV : sqm. 300/350 Indicative surface to be heated F85CV : sqm. 450/500 Indicative surface to be heated F120CV : sqm. 600/700 Rsdpfxjh U A Uas Afhscd ndicative surface to be heated F240CV : sqm. 1.000

Condition: used, Year of construction: 1992, functionality: limited functionality, overall weight: 3,500 kg, total length: 4,000 mm, total width: 1,500 mm, total height: 2,300 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, REX 4-sided planer for structural timber, model HOMS, planing capacity: 300 x 300 mm on 4 sides Rcodpfx Asx Tub Ajfhsd lower horizontal spindle: 7.5 kW upper horizontal spindle: 11 kW right vertical spindle: 7.5 kW left vertical spindle: 11 kW

Condition: excellent (used), Balestrini linear milling machine Two milling units Rcodpfxevt Aynj Afhjd Milling height max 100mm Milling length max 1500mm Work on copiers Two feed speeds 4 pneumatic material clamps Milling unit motor power 2x4kw

Condition: excellent (used), Year of construction: 2010, COMEVA MB 500 Planer/Jointer Working width: 510mm 4-knife cutterhead Traditional knives Rjdpjiwa Spofx Afhjcd Length of work tables: 2630mm Adjustable fence, tiltable at 45° Motor power: 4kW Smoothing combs CE certified

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Rcedpfx Aewyda Uefhed Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 1000028110, functionality: fully functional, power: 12 kW (16.32 HP), travel distance X-axis: 2,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 60 mm, workpiece length (max.): 2,600 mm, workpiece width (max.): 900 mm, workpiece height (max.): 60 mm, Equipment: CE marking, documentation/manual, For sale: Premium vertical CNC machining center. The machine was purchased new; we are the first and only owners, ensuring a clear maintenance and usage history. The machine is in fully operational condition, exceptionally well maintained, and requires no further investment. - Working range x/y/z: 2600-900-60 mm - Working head with BH17 drilling head (10 horizontal and 6 vertical drills) - Speed up to 65 m/min - BSolid control Rcedpfxjy Sfw Ee Afhod - Automatic dimension reading via laser

Condition: used, Planer machine with planing shaft at the bottom and top Double-sided planer for producing slats Rjdpfx Aey Ry Ddofhjcd Feed rate 110 m/min Maximum planing width 310 mm Electrical power 95.75 kW Bottom: 37 kW Top: 45 kW Feed: 13 kW Jointing mechanism at the bottom and top

Condition: used, Year of construction: 1980, No. 3192 Four-sided planing machine WEINIG U 17 A Used, year of construction 1980, machine available from February 2025 Machine still in operation 6 spindles Arrangement of spindles bottom - right - left - top - bottom - bottom Working width 170 mm (with a tool flight circle of 125 mm) Working height 120 mm (with a tool flight circle of 125 mm) Joining spindle 4 HP All other spindles 5.5 HP Feed 2 or 3 HP Speed of the work spindles 6000 rpm Work spindles Ø 40 mm Smallest flying circle Ø of the moulder spindles 100 mm Largest flying circle Ø of the moulder spindles 180 mm Continuous feed, infinitely variable 6 - 18 m/min Transport roller Ø (hardened) 140 mm Transport roller width 50 mm Adjustment range of feed table and joining ruler right 10 mm Adjustment range of vertical spindles under table 40 mm Adjustment range of the horizontal spindles (axial) 30 mm Dressing table length 2 m Rcodpfevkhccjx Afhjd Sale on behalf of customer, ex location Upper Austria, without disassembly, without transport and assembly Errors in description and price excepted Disassembly, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Year of construction: 1986, table size cross table 490 x 400 mm axis stroke (X,Y,Z) 320x385x430 mm reus 560 - 14000 U/min tool taper SK 30 table load max. 100 kg Weight ca. 500 kg Rodpsxbh E Uofx Afhjcd

Condition: excellent (used), For sale: Guilliet KXK four-sided planing machine Very well-maintained, from a one-man carpentry shop Year of manufacture: 1995 Max. planing width: 180mm Max. planing height: 120mm Length of feed table: 2100mm Tool diameter: 100mm Motor powers: Surfacing cutter: 3.7 KW Right cutter: 3.7 KW Rcodpfx Aozivf Ssfhed Left cutter: 3.7 KW Thicknessing cutter: 3.7 KW Feed motor: 1.0 KW Motor power for height adjustment: 0.37 KW Motorized adjustment of the feed bar with the thicknessing cutter Dust extraction connections: Surfacing and thicknessing: each 160mm Left and right cutters: each 120mm

Condition: used, functionality: unexamined, Planing machine with planing roller at the bottom and top Double-sided moulding machine Feed rate 80 m/min Planing width max. 310 mm Planing height max. 310 mm Bottom roller 22 kW Top roller 30 kW Rcsdoy Ryx Uopfx Afhed Feed 7.7 kW Jointing device at the bottom and top Year 1990

Condition: good (used), functionality: fully functional, Saw bushings DK14 Saw bushings DK16 Rjdpfx Aoxq R Rxsfhocd Saw bushing DK17 and other accessories

Year of construction: 2024, condition: ready for operation (used), A Cleveland dressing and profiling machine for machining diamond and CBN grinding wheels is available. Dressing process: dry, max. single wheel dimensions X/Y: 400mm/30mm, max. wheel package dimensions X/Y: 150mm/150mm, grinding spindle diameter: 80mm, wheel flange bore: 32mm. Machine dimensions X/Y/Z: approx. 2200mm/1700mm/2000mm, weight: approx. 850kg. Documentation available. An on-site inspection is possible. Rcedpfxozhb Eus Afhed

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, operating hours: 7,810 h, input current: 43 A, input frequency: 50 Hz, type of input current: three-phase, workpiece weight (max.): 2,804 kg, number of axes: 3, number of slots in tool magazine: 6, actuation type: electric, overall weight: 2,804 kg, number of tool turrets: 31, Equipment: CE marking, documentation/manual, type plate available, For sale is a Morbidelli Drilling Center with low operating hours – the machine is connected and ready for trials and tests. MORBIDELLI CX210 CNC Drilling Center R00169 MORBIDELLI CX210 TECHNICAL DATA Min./max. workpiece length mm 200/3,050 Min./max. workpiece width mm 50/1,300 Min./max. workpiece thickness mm 8/95 Max. traverse rate in the X-axis m/min 40 Max. workpiece weight kg 70 Max. traverse rates in the X-Y-Z axes m/min 70-40-30 F31LTC DRILLING HEAD Number of vertical spindles pcs. 21 Number of horizontal spindles in the X-axis pcs. 6 Number of horizontal spindles in the Y-axis pcs. 4 Motor power kW 2.2 Spindle speed rpm 4,500 (option 3,000 – 8,000) Fixed integrated saw in the X-axis, diameter mm 125 Max. saw blade thickness mm 6 Rodpfx Afozdfhaohjcd Saw blade speed rpm 5,500 (option 3,600 – 9,700) INSTALLATION Compressed air consumption Nl/cycle 80 Dust extraction air requirement m3/h 3,300 Dust extraction air velocity m/s 25 Dust extraction nozzle diameters mm 200 + 80 Electrical protection kVA 19 Key advantages: -HSK63F milling head 6.6KW -Cutting saw -31 L drilling head -Infeed and work roller table -2 clamps instead of 1 pc. Speed 70 m/min Spindle + 6-position magazine

Condition: used, with Tersa knife shaft used, good condition Rcedpfxsvwgh Ro Afhsd Make Müller Brugg Type DA 6 M Planing width approx. 610 mm Planing height approx. 220 mm Table length approx. 2200 mm Bridge protection Slotted table lips Low-noise table lips Number of knives 4 pieces Knife system - Tersa reversible knives Table sliding rollers Space required approx. 2300 mm x 1500 mm x 1100 mm Weight approx. 2000 kg Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee or warranty