Used Planer Type Milling Machine for sale (86,817)

Condition: good (used), Year of construction: 1997, Manufacturer: Line Type: Seramill 240 Control: NUM 750 Travel X: 6000 mm Dkjdpfx Afoyf A H Njpeh Travel Y: 2500 mm Travel Z: 950 mm Column spacing: 2400 mm Table: 6000 x 2100 mm Automatic milling head: 2.5° Spindle speed: 3200 rpm Feed rate: 10 m/min Machine weight: approx. 35 tons

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 9101, travel distance Y-axis: 4,600 mm, travel distance Z-axis: 1,600 mm, rotational speed (max.): 6,000 rpm, Equipment: rotational speed infinitely variable, Machine configuration: • PowerPortal4000 • 45° diagonal milling head (C 0.01° / A 0.01°) • Camera system integrated in SHW diagonal milling head • 4-point Hirth-type milling head interface • Heidenhain TNC 7 Dkjdpeygtnaefx Afpsh • HR 550 FS handwheel • Heidenhain optimization for 5-axis machining • X = freely selectable, Y = 4,600 mm, Z = 1,600 mm • ToolCenter with 90 tools • Coolant system 2,500 l • Coolant pump 70 bar / 30 l/min • Coolant/air switching • Wash gun in the working area • Main drive 75 kW up to 6,000 rpm • Tool holder SK 50 BIG-PLUS • Panelling and grating • Double chip conveyor • SHW-UniScan • Sealing air • Operating mode 3 • Hexagon wireless probe • LED workspace lighting • Second camera in the working area

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, torque: 57 Nm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1999 Control: Heidenhain TNC430 PA with portable hand control unit Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±110° C-axis ±300° Dkodpfx Aex Ifdkjfpjh Clamping table Length x Width x Height: approx. 4,500 x 2,000 x 400 mm Longitudinal T-slots 18H12 T-slot spacing 250 mm (Shown zero-point clamping plates and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 18 kW Spindle speed: max. 15,000 rpm Torque: 57 Nm Tool holder: HSK 63 F Tool clamping: hydraulic Linear axis drives Feed rate X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Machine footprint without control cabinet: approx. 6,000 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 15,000 kg Additional equipment - 12-position tool changer - External minimum quantity lubrication - TT140 touch probe Condition of the machine Fully operational, machine is supplied without enclosure and must be enclosed by the purchaser in accordance with CE regulations.

Condition: used, Year of construction: 1997, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, rotational speed (min.): 1,500 rpm, rotational speed (max.): 9,000 rpm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1997 Control system: Heidenhain Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±90° Clamping table Length x width x height approx. 4,500 x 2,000 x 400 mm Dedex Iuguspfx Afpjkh T-slots longitudinal 18H12 T-slot spacing 250 mm (The zero-point clamping plates shown and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 12 kW Spindle speed: max. 9,000 rpm Tool holder: SK40 / ISO40 Linear axes drives Feed speed X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Space required by machine (without control cabinet): approx. 5,600 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 14,000 kg Condition of the machine Fully functional, the machine is delivered without enclosure and must be enclosed in a CE-compliant manner by the buyer. Note: The tool changer, vacuum table including pump, and extraction unit can be purchased at an additional cost. However, they are NOT included as standard equipment with the machine!

Condition: used, Year of construction: 2009, Year of manufacture: 08/2009 Commissioning: 03/2010 Control: Heidenhain iTNC 530 Technical Data: Tool holder: SK 50 Tool changer: 30 stations Spindle speed vertical, stepless: 4400 rpm Spindle speed horizontal, stepless: 3500 rpm Cutting capacity: 440 cm³/min Positioning accuracy: +/- 0.005/300 mm Repeatability of the automatic swivel head: +/- 3' Machine table (LxW): 4000 x 2000 mm Travel paths X/Y/Z: 4230 x 2150 x 775 mm Max. workpiece weight: 11,000 kg Rapid traverse X/Y/Z: 12 / 15 / 12 m/min Dsdpfx Aoya U Uusfpjkh Motor power: 22 kW Dimensions (LxWxH): 10,130 x 4,510 x 4,250 mm Machine weight: 27,000 kg Scope of delivery: - Chip conveyor - Tool cabinet - Approx. 80 tool holders including tools

Condition: good (used), Year of construction: 1999, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,150 mm, total length: 6,000 mm, total width: 5,200 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 10 m/min, Control: Siemens 840 D Powerline Dkedpfx Ajyg Hi Dofpjh Tool holder: HSK-A63 Max. rpm: 16,000 X-travel: 3,000 mm Y-travel: 2,500 mm Z-travel: 1,150 mm A-axis: +/- 100 mm C-axis: +/- 181.5 mm Table size: 3,000 mm x 2,500 mm Option: External blowing air Kinematics: Fork head

Condition: good (used), Year of construction: 2005, Unisign Uniport 6000 portal milling machine, year of manufacture 2005, Siemens 840 D control, Travel X/Y/Z 3000/3000/1000 mm, C-axis for turning operations, Table Ø 2500 x 2000 mm, max. turning diameter Ø 3000 x 2500 mm, max. turning height 1000 mm, Angular head for side machining, 2.5° Hirth serration, Spindle speed up to 6,000 rpm, Spindle power 36 kW, Mount HSK 100, Tool changer for 30 tools, 3D measuring probe, Djdpsyhb Tasfx Afpjkh Chip conveyor, Faceplate Ø 2000 mm, Max. faceplate load 10,000 kg, Machine weight 45,000 kg.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,100 mm, CNC 5-axis Gantry Milling Machine BELOTTI Eureka 4014 (4000x1400mm) 5-axis milling machine / machining center Dkjdpfxoycin Is Afpeh Belotti Eureka 4014 Model 3414. Year of manufacture 2001. Machine in stock, in good condition, fully functional. Available immediately, including a refurbished spare 4kW spindle, software, and complete documentation. Primarily intended for trimming and milling 3D parts – plastic, carbon, laminate, MDF, wood, aluminium, etc. Spindle speeds: 18,000/600Hz – 24,000/800Hz Transport can be arranged. Axis travels:    • X-axis: 4,000 mm    • Y-axis: 1,400 mm    • Z-axis: approx. 1,100 – 1,200 mm

Condition: good (used), Year of construction: 2013, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, GANTRY MILLING MACHINE Dkedpfx Afjyak Dxjpeh The Techmill Laborshape (2013) is a large-capacity 5-axis machining center, primarily designed for high-speed machining of composites, resins, and light alloys—highly sought after in the aerospace and automotive prototyping sectors. CNC Control: The Siemens 840DSL with Shopmill is an industrial standard still relevant in 2026, ensuring straightforward maintenance and good compatibility with modern CAD/CAM software. Cutting Capacity: The HSK 63A taper is ideal for High-Speed Machining (HSM). Limiting use to 12,000 rpm (from 18,000 theoretical) has preserved the bearings and geometric accuracy. Key Benefit: The spindle reconditioning in 2023 is a crucial selling point, eliminating the main financial risk for a used buyer of a 13-year-old machine. Working Envelope: The travel dimensions (3000 x 2000 x 1250 mm) are highly sought after in aerospace and marine industries.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 6,500 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 650 mm, table length: 6,300 mm, table width: 2,500 mm, spindle speed (min.): 30 rpm, spindle speed (max.): 4,000 rpm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 3,500 m/min, rapid traverse Z-axis: 10,000 m/min, distance between stands: 3,050 mm, table load: 30,000 kg, overall weight: 59,000 kg, spindle nose: NT No.50, feed length W-axis: 1,300 mm, Okuma MCR-A5C gantry machining center (2013) with BT50 spindle, 6,500 mm X-travel and 30 t table load. Machine has approx. 5,700 cutting hours and 6,900 spindle hours, suitable for heavy and precise machining of large workpieces. Dodsx Tzyxjpfx Afpjkh

Condition: used, Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,700 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,050 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, total length: 8,500 mm, table length: 2,000 mm, table width: 1,250 mm, total width: 7,500 mm, spindle speed (max.): 6,000 rpm, total height: 5,020 mm, Equipment: rotational speed infinitely variable, CNC travelling column machining centre manufactured by MIKROMAT Werkzeugmaschinen GmbH & Co. KG, Dresden, designed for precise and heavy-duty machining of large-format workpieces. The machine features a classic travelling column design and is particularly suitable for tool, mould, and mechanical engineering. Equipped with a Heidenhain TNC 430 M CNC control. Distance spindle nose – table: Vertical: approx. 300 – 1,350 mm With universal milling head (UFK): vertical: approx. –290 to +760 mm horizontal: approx. –55 to +995 mm in table area: approx. 180 – 955 mm Spindle / Speeds: Spindle without extension: 10 – 6,000 rpm Spindle with extension: 10 – 6,000 rpm Universal milling head (UFK): 10 – 4,000 rpm Universal milling head (UFK): Rotation about vertical axis: 360° (indexing 2.5°) Swivel about horizontal axis: ±110° (indexing 2.5°) Djdpfxeycw I As Afpokh Electrical data (nameplate): Connected load: approx. 68 kW Nominal voltage: 400 V / 50 Hz Control voltage: DC 24 V Auxiliary voltage: 230 V Total weight: approx. 57 t CE-compliant, Made in Germany

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 87342, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,000 mm, total length: 9,000 mm, table width: 2,000 mm, total width: 4,000 mm, spindle speed (max.): 10,000 rpm, total height: 3,000 mm, rapid traverse Y-axis: 2,000 m/min, type of input current: three-phase, overall weight: 55,000 kg, controller manufacturer: Heidenhain, controller model: iTNC 530 HSCI, input voltage: 400 V, coolant supply: 20 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Swivel Head 2-axis swivel head with A-axis ±90° (180°) and B-axis 360°. Version with Hirth gearing and hydraulic clamping. Spindle / Drive AC hollow-shaft spindle motor, 25 kW at 100% duty cycle, 40 kW at 40% duty cycle. Speed up to 10,000 rpm, tool interface SK40. Tool Changer Chain magazine with 22 tool stations. Equipment Chip conveyor available. Dkedpfxoycw D Re Afpsh

Condition: used, Year of construction: 2000, Make: DROOP + REIN, Model: T2540R50E, Year of manufacture: 2000, Serial No.: 01540, Control: Fidia, Type C20/M30, Travels X/Y/Z: 5,000 x 3,000 x 1,950 mm, 5 axes, Tool holder: SK 50, Table size: 5,000 x 3,500 mm, Spindle speed: 6,000 rpm, 60-position tool changer, Measuring system: Braankamp, Safety light barriers, 1 workbench, 3 drawer cabinets, 3 WTS trolleys, 6 WTS roller cabinets, Contents: 250 SK 50 tool holders, measuring probe, clamping devices, setup tools +++ Note: Machine is part of an online auction! +++ Dedpfx Afox R Dr Eopekh

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 1,10,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. Dkedpfx Ajyahv Sofpjh

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 23750, travel distance X-axis: 7,500 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,300 mm, spindle speed (max.): 24,000 rpm, overall weight: 1,20,000 kg, grinding spindle motor power: 32,000 W, We offer this used FOOKE Endura 905 Linear planer-type milling machine - double column, year of construction 2008. Machine type: Endura 905 Linear Year of manufacture: 2008 Voltage: 400/230 V Frequency: 50 Hz Power: 130 kW Electrical enclosure rating: IP54 Dksdpfx Aoyazmksfpjh Weight: 120000 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2019, travel distance X-axis: 6,300 mm, travel distance Y-axis: 3,600 mm, travel distance Z-axis: 1,800 mm, table length: 6,300 mm, table width: 3,600 mm, spindle speed (max.): 2,500 rpm, GANTRY MILLING MACHINE DYE CNC SIEMENS (RETROFIT 2019) TECHNICAL SPECIFICATIONS Brand: Dye (Retrofit) CNC: Siemens 840D Year: Retrofit 2019 Table: 6300 x 3600 mm Dodjydbhpspfx Afpskh X-axis: 6300 mm Y-axis: 3600 mm Z-axis: 1800 mm W-axis (Quill): travel to be confirmed Head magazine: 4 positions Includes 1 automatic 360° angular head Tool magazine: 60 tools Spindle motor: 40 kW PRICE AND FURTHER INFORMATION ON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKES)

Condition: repair required (used), Year of construction: 2007, functionality: not functional, type of input current: three-phase, We are offering this Knuth X-Mill 900 CNC portal milling machine, year of manufacture 2007, which is in need of repair. The Z-axis requires repair. Machine type: X-MILL 900 CNC Serial number: 141887 Year of manufacture: 2007 Total power: 12.4 kW Djdpex Stfqefx Afpekh Voltage: 400 V Frequency: 50 Hz Phases: 3 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: CAM060818P1515, overall weight: 500 kg, We are offering this used vhf camfacture AG CAM 1515 Premium gantry milling machine, year of manufacture 2009. Model: CAM 1515 Premium Serial number: CAM 060818P1515 Weight: 500 kg Year of manufacture: 2009 If you have any questions or require further information, please feel free to send us a message or call us. For sale is a VHF gantry milling machine CAM 1515 Premium (CNC gantry milling machine) from our inventory. Suitable for the machining of aluminium and plastics (milling/drilling/contouring, depending on configuration/spindle). Sale includes the control panel/controller as shown in the photos. The machine can be inspected by prior arrangement. Technical details (available): Manufacturer: VHF camfacture AG (DE) Model: CAM 1515 Premium Dedpjx Sryyefx Afpekh Year of manufacture: 2009 S/N: CAM 0608171515 Weight: approx. 500 kg Inventory no.: 03246 Scope of delivery / collection: Scope of delivery as per photos; additional accessories/clamping devices by arrangement. Collection from site. Dismantling/loading by the buyer or by arrangement.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: CAM 060934A1035, overall weight: 600 kg, We are offering this used vhf camfacture AG CAM 1035 Active Pro gantry milling machine, year of manufacture 2010. Type: CAM 1035 Active Pro Serial number: CAM 060934A1035 Weight: 600 kg Year of manufacture: 2010 If you have any questions or need further information, please feel free to send us a message or give us a call. Dksdex Srw Ejpfx Afpjh For sale is a vhf CAM 1035 Active Pro CNC gantry milling machine from 2010 (Made in Germany). This machine is suitable for precise operations such as milling/engraving in typical materials used for fittings/profile machining. Nameplate data: Machine no. CAM 060934A1035, weight approx. 600 kg. On-site inspection is possible by prior arrangement; loading/collection by the buyer.

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, Travel distances: X-axis (longitudinal) 3200 mm Y-axis (transverse) 2100 mm Z-axis (vertical) 900 mm Working area: Table clamping surface 3000 x 1700 mm Spindle nose to table 66 – 966 mm Table load capacity 11000 kg 5-axis fork head: Tool holder HSK 63 A C-axis (4th axis) +/- 360° B-axis (5th axis) +100° / -110° Dksdpfx Asx H Srlefpoh Main drive: Drive type Motor spindle Drive power 63 kW Spindle speed: Spindle speed 18000 rpm Torque 106 Nm Max. rapid traverse: X and Y axes 15000 mm/min Machine weight: 37700 kg Accessories: HURCO CNC Machining Center DCX 32-5 Si (ATC 60) with MAX5 control - AXS control with detachable electronic handwheel - Pentium technology, SSD (Solid-State Drive), 2 GB RAM, Ethernet interface, USB interface, built-in self-diagnosis system, WINDOWS platform - Rigid tapping (tapping without compensation chuck) - 60-position tool changer - 5-axis fork head - Motor spindle - Spindle cooler - Chip conveyor 5-axis simultaneous machining, enabling simultaneous movement of 4 or 5 axes in NC operation.

Condition: used, Year of construction: 2010, travel distance X-axis: 3,020 mm, travel distance Y-axis: 1,520 mm, • Monoblock structure in welded steel with a mobile gantry in steel. • Processing speed up to 18 m/min. • Worktable: fixed table made of high-thickness aluminum profiles. • Hardened linear guides and preloaded ball-bearing carriages. • Transmission via precision ball screws on all 3 axes. • CN7000 numerical control with touch screen and brushless servo drives. • Available in 5 sizes for maximum flexibility. • Z 350 option for 3D applications. • Quality and performance suitable for good productivity. Dkodpfx Aoxxii Asfpeh • Well-known ease of use. • Compliant with European safety regulations. • Numerous options: brushless servomotors, micro-lubrication, automatic tool changer, vacuum table (with turbine or vacuum pump), high-frequency spindles, contact engraving spindles, fourth axis.

Condition: excellent (used), Year of construction: 1994, operating hours: 1,930 h, functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 4,200 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, total length: 15,000 mm, table length: 5,000 mm, total width: 15,000 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 4,000 rpm, total height: 7,500 mm, table height: 1,350 mm, distance between stands: 3,500 mm, type of input current: AC, table load: 65,000 kg, workpiece weight (max.): 65,000 kg, distance table center to spindle nose: 2,300 mm, overall weight: 2,10,000 kg, spindle motor power: 50,000 W, MACHINE DATA Machine type: Portal milling machine - double column for continuous 5 axis operation Manufacturer: WALDRICH COBURG Model: 15 S - 10 FPF 300 NC Year of construction: 1994 Condition: Fully refurbished 2015 Functionality: fully functional Operating hours: 1,931 h TECHNICAL DETAILS Number of controlled axes: 5 travel distance X-axis: 7,200 mm travel distance Y-axis: 4,200 mm travel distance Z-axis: 1,750 mm spindle speed (max.): 4,000 rpm working width: 3,500 mm PROVISION Machine location: Ljubljana, Slovenia Availability: now Delivery conditions: FCA Pick up at location: Ljubljana Shipping costs: upon request Planer-milling machine - double column: completely overhauled in 2014 / 2015 by Waldrich Coburg (basically everything except the casting): > New control unit > New cables > New motors > New electrics > Guideways overhauled DESCRIPTION - Heavy double-column machine for processing complex shapes - 2 pallet stations with 2 pallets (load capacity 65t each) - Machine with CNC control SIEMENS 840D sl - In 2014, conversion of the control system to SIEMENS 840D sl (incl. complete cabling and control cabinet) - in 2015 replacement of all axis motors - Various angle milling heads - NC-controlled milling head with 50 kW milling power / clamping 2.5° each with Hirth serration (type USP300C450F15S) - 2-axis NC-controlled fork head with 40 kW milling power (type UFN00SZ500) - Automatic tool changer for 76 tools (ISO 50 and 60) TECHNICAL DETAILS Travel X / Y / Z: 7,200 / 4,200 / 1,750 mm Milling width: 3,500 mm Distance spindle nose to table: 2,300 mm Milling power: 50 kW Speed: 10 - 4,000 rpm Front spindle diameter: 150 mm Spindle holder: ISO 60, ISO50 Control: Siemens 840D sl Pallet size: 3,000 x 5,000 mm Pallet load: max. 65 t Number of pallets: 2 pieces Tool changer: 76 slots Feed rate: 10 - 15,000 mm/min MACHINE DETAILS Pick-up power: 92 kW Weight: 210 t Spindle hours: 1,931 h Switch-on time: 7,870 h Dkjdpfx Afsvv N I Ropoh Bed dimensions: 12.5 x 2.3 x 0.78 m; 28.5 t Pallet dimensions: 5.35 x 3.0 x 0.4 m; 22 t Main pallet carrier dimensions: 5.1 x 2.9 x 0.5 m; 25 t Dimensions of bed section: 3.8 x 2.9 x 0.5 m; 10 t Milling spindle box dimensions: 4.1 x 1.9 x 1.5 m; 13.5 t Left/right column dimensions: 4.1 x 1.3 x 1.7 m; 10.5 t Exhaust air slide dimensions: 8.5 x 0.7 x 1.2 m; 1.1 t Control cabinet dimensions: 7.9 x 0.6 x 2.1 m; 2.8t THIS IS A TOP CLASS MACHINE FOR MOST ACCURATE WORK; HIGHLY EFFECTIVE. MACHINE IS ASSEMBLED AND UNDER POWER:

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM Dkedpfxsh U Nvkj Afpoh WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: used, Year of construction: 2008, Working width: 260 mm Working height: 130 mm Number of working spindles: 5 Spindle arrangement: bottom, right, left, top, bottom Grooved bed: yes Motor power bottom spindle: 5.5 kW Motor power right spindle: 5.5 kW Motor power left spindle: 7.5 kW Motor power top spindle: 7.5 kW Motor power bottom spindle: 7.5 kW Bottom spindle adjustment: handwheel Right spindle adjustment: handwheel Left spindle adjustment: handwheel Top spindle adjustment: handwheel Cutterheads: Centrolock Feed speed: stepless Feed roller pressure: pneumatic Current consumption: 50 A Current consumption: 71.7 A Motor brake: automatic Dsdpfx Afoyhgkdjpskh Extraction connection: Machine length: Machine width: Weight: 4500 kg

Condition: used, Year of construction: 1999, Technical details: x-travel: 3 500 mm y-travel: 2 200 mm z-travel: 1 200 mm c-axis: +/- 200° control: Heidenhain TNC 426 spindle rpm - counter clockwise:: max. 10000 spindle rpm - clockwise:: max. 10000 distance between columns: 2 500 mm distance spindle /table: vertical: 1230 mm clamping surface area: Tisch: 3000 x 2000 mm table load: 10 t tool taper: HSK A 63 feed:: X/Y/Z: max. 20 m/min. compressed air: 8 bar total power requirement: ca. 100 kW weight of the machine ca.: 40 000 kg dimensions of machine: 18,0 x 6,0 x 5,8 m 5 axis Portal Milling Machine 5-axis portal milling machine Milling spindle: make Hauser type HS 256A-01 Uni, speed max. 10.000 rpm. direct drive Milling head: make Hamül, fork type, A-axis integrated = angle of rotation +/- 110°. Tool changer: Hamül make, rotary indexing table type with rotary table, for 32 tool positions chip conveyor: 2 pieces hinged belt conveyor make DGS with water tank, insertion length 8.500mm make BKW type DL 55V-2KK, capacity 2,41 l/min.; (combined for oil- water mixture for oil and spindle cooling) Cooling lubricant system: belt filter make DGS type SBF 150 Operation: via control panel type Heidenhain LE 426 X-, Y- and Z-axis with Heidenhain measuring rods. manual control unit HR 410 hydraulic counterbalance (Z-axis) Equipment: Enclosure (protective walls with viewing windows and protective doors) hydraulic system working area lighting * Dodpfx Afju Nc Emopjkh