Used Wood Shaving Bedding for sale (21,261)

Condition: repair required (used), Disc chipper Bruks IDC000127 Dksdpfjvzw Tfjx Ahxsu - infeed 220 X 280 mm - without electric motor

Condition: used, The company sells pellet production line and Spe Renergi low-temperature wood chip dryer/kiln PELLET PRODUCTION LINE CAPACITY 6 t/h | CPM, Fisker, Mogensen A fully assembled and working pellet production line with a capacity of up to 6 tons per hour is for sale. Ideal for professional production of pellets from wood biomass, agrobiomass or other raw materials. The line includes: • CPM Championdry hammermill. • 2x CPM Pressess • Fisker (Essegi F1200) branded new fullautomation packaging line • Mogensen vibro sieves • Vecoplan / CPM wet wood chip milling station • Transporters / feeders Additional searparts are available – matricas, rolls, etc. Main advantages: • Large production capacity – up to 6 t/h. • High quality components from European manufacturers. • Line in working order – can be demonstrated in operation. • Available immediately. The equipment is located in Sweden and, upon prior agreement, it is possible to view and test it in person. Price: 400,000.00 EUR (VAT is not included) SPE Renergi Low Temperature Dryer. Dedpfxswp Rqfe Ahxoku The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 30,000.00 EUR (VAT is not included)

Year of construction: 2008, condition: ready for operation (used), This DELTA pallet nailing machine line was manufactured in 2008. It features a comprehensive setup including a base nailer, a nailing machine with pneumatic feeder and nail control, units for marking, turning by 90 and 180 degrees, a corner saw, and a stacking unit, complemented by a conveyor belt. Consider the opportunity to buy this DELTA pallet nailing machine line. Contact us for more information. Dkodpfx Ahjxbupasxsu Application Types Complete Production

Year of construction: 2013, condition: new, wood baking oven with direct heating baking area 1,0 x 0,7 x 0,25 m (L x W xH) 8cm heatingstones Dodpfxsygm Us Ahxeku also available with fully automatic pelletfiring system

Condition: used, Year of construction: 2016, operating hours: 6,257 h, Auction item. Wood chipper with tractor Class Xerion 3800 in working condition. 7 months ago was made an overhaul of tractor engine. Tractor: power- 268 kW, year - 2010, weight - 13 400 kg, technical inspection valid till 2026-01-31. Dksdpfxsxfz A Ie Ahxju Crane: Palfinger M70F101, year - 2016. Tractor tires size 800/70R38. Items location may be different.

Condition: excellent (used), For sale: Genini brand lathe in very good condition Dkedpfoxf Nyusx Ahxou

Condition: used, Belt conveyor for wood pellets Manufacturer: Sew-Eurodrive Length: 23cm Dsdpewv Sn Eofx Ahxsku Width: 1 m Power: 9.2kW

Condition: excellent (used), Year of construction: 2003, CNC UNICA Wood production year 2003, Uniteam brand since 2016 belongs to Biesse Machine in good working condition, very fast working in x - y - z axis , ideal for milling in wood , MDF, laminated panels Max. useful working area (X-Y-Z) mm 3440 x 1300 x 200 mm Dedpfx Aowk Ekcohxoku Vertical electrospindle motor power 9 kW Machine size 5000 x 2350 x 2200 mm Weight 4000 kg

Year of construction: 2018, condition: ready for operation (used), General Data Measurements width 9294.05 mm Measurements depth 32183 mm Measurements height 820 mm Main Drive Spindle speed range 1795 This FURNIMATE SAT-660-F it's a Finger Jointing line Machine which was manufactured in 2018. It features a machine length of 32,183 mm and a width of 9,294.05 mm. The machine operates with a SAR-1 control system, achieving a carriage forward speed of 40 m/min and a backward speed of 90 m/min. The spindle speed reaches up to 1,795 RPM. Consider the opportunity to buy this FURNIMATE SAT-660-F Finger Jointing line Machine. Contact us for more information. Application Types Other Woodworking Machinery Dksdpfxjxa H Tns Ahxsu

Condition: used, Year of construction: 2005, functionality: fully functional, 600 mm wide rotor 18 teeth 15 kW motor power Dkjdpfx Ahsxcwb Isxeu Hydraulic pressor

Year of construction: 1980, condition: excellent (used), planing width 310 mm planing height 300 mm four-sided planing height 200 mm bottom head motor 15 kW upper head motor 22 kW Dodpeiqflbofx Ahxjku right head motor 7.5 kW left head motor 11 kW feed motor 7.5 kW electric height adjustment smooth change of feed speed

Condition: like new (used), operating hours: 12 h, i3 Microclean UPGRADE DX PALLET SHAVING (€2,000) Like New – 1-Year Warranty Includes hoses and multiple nozzles. This machine is designed for industrial cleaning, scaling, and large-scale projects. A key advantage of this unit is its minimal use of new-generation electronics, resulting in enhanced reliability. The i3 Microclean is among the most powerful and aggressive machines currently available on the market and is in excellent condition. COLD JET machines are suitable for industrial cleaning, heavy-duty decontamination, and large projects. The absence of complex, modern electronics ensures maximum operational reliability and simplified maintenance. This machine remains in outstanding condition. Cold Jet i3 Microclean & Dry Ice Press – Complete Blasting Solution, Including the Following Equipment: • COLD JET i3 Microclean (12 operating hours) • 1 x 20’ blasting hose • 1 x Cold Jet applicator • 1 x nozzle Price: €24,500 This is one of the most highly regarded dry ice cleaning systems globally. With no sensitive electronics, it offers exceptional reliability and cost-effective maintenance. For inquiries or to schedule a viewing, please contact DrDryice. All machines come with a 1-year warranty. Cold Jet machine repair and maintenance services available. We also supply new Cold Jet machines – contact us for details. Worldwide shipping available. Cold Jet dry ice machine for sale dry ice blasting machine for sale Dksdpjxga Tzofx Ahxsu dry ice blaster for sale buy dry ice blasting equipment Dry ice blasting machine for sale Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machines for sale dry ice blasting systems – various Cold Jet models available Cold Jet dry ice machine repair and maintenance i3 Microclean Dry ice press

Condition: used, Wood chipper Bruks 1500M IDC000079 - Manufacturer: Bruks - Chip screen: BS2 - Scraper conveyor Dsdpfx Aot D Dhdshxeku - Belt conveyor - Cyclone - capacity: 50 m3/h

Condition: new, Year of construction: 2025, functionality: fully functional, Filling system consisting of the following components: 1. Cross Trough: Trough width: 2.8 m Trough height (lower side): only 0.8 m Trough depth: 1.2 m incl. protective grid on top incl. 3 kW gear motor left and right versions available Optional: chassis, forklift adaptation, .... 2. Inclined Screw Conveyor: Length: 2 m (other lengths available upon request) Variable inclination incl. 3 kW gear motor 3. Feed Screw: Length: 2 m (other lengths available) Dodpfxjvrcfue Ahxsku Open on the end face All screw conveyors have a diameter of 200 mm and are continuously welded onto a steel tube! (Larger screw diameters also available upon request!) Without wiring and control system We are also happy to offer you custom-made designs! Prices excl. VAT.

Year of construction: 2008, condition: ready for operation (used), Main Drive Number of axis 5 Dodpfx Asxfctbohxeku Additional Equipment Central Lubrication Vacuum Supply: 1 vacuum pump (Busch-Mink) Output approx. 250 m3/h 1 unit for manual operation (emergency stop, feed, hood open/close) Protective Fencing Remote Diagnosis Available This 5-axis MKM UNI Portal 50/15 RO was manufactured in 2008, designed for versatile machining of wood, plastics, and light metals. It features a large working area with dimensions of 5000mm x 1500mm, and a clearance height of 200mm. The machine includes a high-performance electric spindle with HSK 63 F connection and a 12-position automatic tool change magazine. Ideal for complex, multi-axis operations. If you are looking to get high-quality milling capabilities consider the MKM UNI Portal 50/15 RO machine we have for sale. Contact us for more information. Application Types CNC Wood Machining

Condition: excellent (used), CATALOG NUMBER 7102 TECHNICAL DATA - Inlet width: 400 mm - Inlet height: 180 mm - Shaft width: 430 mm - Shaft diameter: 430 mm Dkedjnwmr Uepfx Ahxsu - Knife length: 430 mm - Number of knives: 2 pcs - Screen dimensions: 18x18 mm - Bottom toothed feed roller - Lower roller motor: 0.75 kW - Top toothed feed roller - Upper roller motor: 0.75 kW - Belt feeder - Feeder belt length: 3260 mm - Feeder belt width: 400 mm - Main motor: 38 kW - Automatic reverse - Extraction connection diameter: 250 mm - Overall dimensions (L/W/H): 5200x1400x1870 mm - Weight: 2020 kg – German production – Automatic reverse (adjustable) – Used chipper, in very good condition Net price: 63,900 PLN Net price: 15,000 EUR (depending on an exchange rate of 4.25 EUR) (Prices may vary in the event of significant rate fluctuations)

Condition: used, Drum wood chipper IDC000025 - Manufacturer: Erjo, - Model: 204 MA, - Electric motor: 55 kW, Dkodpotqz Sfofx Ahxeu - Capacity: 20-40 m3/val.

Year of construction: 2002, operating hours: 29,307 h, condition: ready for operation (used), General Data Measurements width 4500 mm Measurements depth 6650 mm Measurements height 2370 mm Additional Equipment Vacuum Pump: 2 Siemens ELMO-L Program: WoodWop 4.5 Operating System: Windows XP Djdpfx Asxcql Hohxeku This Weeke OPTIMAT BHC 550 was manufactured in 2002. It features a robust support table measuring 3250x1300mm, suitable for all-around machining, and a workpiece thickness capacity of 100mm. The machine includes a front tool changer with 8 positions and a rear tool changer with 18 positions, enhancing its versatility. Consider the opportunity to buy this Weeke OPTIMAT BHC 550 CNC Wood Machining Centre. Contact us for more information about this machine. Application Types CNC Wood Machining

Condition: excellent (used), Catalog number 7291 TECHNICAL DATA - inlet width 500mm - inlet height 200mm - shaft width 630mm - knife length 630mm - number of knives 2pcs - sieve dimensions 60x60mm - toothed pulling shaft from the bottom - lower shaft motor 4kW - toothed pulling shaft from the top - upper shaft motor 4kW - feed belt length 4100mm - feed belt width 400mm - feeder motor approx. 2kW - main motor 55kW - auto reverse - feeder dimensions L/W/H 4670x760x720mm - machine dimensions L/W/H 2550x1800x1300mm - weight approx. 4000kg – German production - auto reverse – used chipper, very good condition Original photos Net price: PLN 118,900 Net price: EUR 27,980 depending on the price of EUR 4.25 Dsdpfjrx T E Tox Ahxeku (Prices may change with higher fluctuations)

Condition: used, Wood chipper with outside building IDC000125 - manufacturer: Mario Ferrari - Year 1995 - complete with vibrating conveyor - soundproof room - with sawdust fan Dkedpsvy Tqqofx Ahxeu - with electric cabinet

Condition: excellent (used), CATALOG NUMBER 7594 Technical data: - Feed hopper inlet: 620x800mm - Outlet for shredded wood: 160mm diameter - Rotor working width: 620mm - Main motor: 18.5kW - Pump motor: 0.75kW - Number of knives: 30 pcs - Knife dimensions: 30x30mm Dedpfov R Tndex Ahxsku - Screen: 12mm/15mm - Pressure drawer - Auto-reverse - Dimensions (L/W/H): 1750x1220x1650mm - Weight: 1020kg ADVANTAGES – German-made – Original DTR documentation – Auto-reverse – Pressure drawer – Very good condition – Used chipper Net price: 39,900 PLN Net price: 9,388 EUR based on rate 4.25 EUR (Prices may change with increased fluctuations)

Condition: used, Kahl - Wood Pellet cooler 3-5 tons per hour Dkjdjv R Tdfepfx Ahxeu

Condition: excellent (used), Catalog number 7260 TECHNICAL DATA - loading hopper inlet 870x730mm - rotor working width 710mm - main engine 18.5kW - pump engine 0.75kW - number of knives 19pcs - knife dimensions 75x40mm - sieve 15mm - pressure drawer - electric auto reverse Djdpfxorit Rue Ahxjku - outlet for shredded wood fi 250mm - dimensions l/w/h 2350x1400x1670mm - weight 1360kg ADVANTAGES - pressure drawer - very good condition - used chipper Net price: PLN 37900 Net price: EUR 8920 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOG NUMBER 6114 TECHNICAL SPECIFICATIONS - Loading hopper inlet 800x1000 mm - Rotor working width 800 mm - Pump motor 0.75 kW - Main motor 15 kW - Number of knives 21 pcs - Knife dimensions 30x30 mm - Screen 0.8x10 mm - Press drawer Dodsgnzd Eopfx Ahxjku - Electric auto-reverse - Discharge augers 2×1.1 kW - Dimensions (L/W/H) 2460x1800x2250 mm - Weight 1660 kg – German made – Auto-reverse – Press drawer – Unpainted – Very good condition – Used shredder Net price: 63,900 PLN Net price: 15,000 euros, depending on the exchange rate, 4.25 euros (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7262 TECHNICAL DATA - Upper loading hopper inlet: 780x620mm - Lower loading hopper inlet: 650x620mm - Output for shredded wood: Ø160mm - Rotor working width: 600mm - Rotor diameter: 248mm - Main motor: 18.5kW - Pump motor: 0.75kW - Number of knives: 30 pcs - Knife dimensions: 30x30mm - Screen: 20x20mm - Hydraulic pressing drawer - Electric auto-reverse - Dimensions (L/W/H): 1750x1200x1650mm - Weight: 1200kg ADVANTAGES – Made in Germany – Original DTR documentation – Not repainted – Auto-reverse – Hydraulic pressing drawer – Very good condition – Used chipper Dksderm Ii Dspfx Ahxou Original photos Net price: 38,900 PLN Net price: 9,150 EUR depending on the 4.25 EUR exchange rate (Prices may change depending on exchange rate fluctuations)