Used Wood Splitter for sale (6,287)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working height: 900 mm Working width: 1,350 mm Belt changing side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350–1,380 mm Adjustable sanding belt blowing device with 5 settings WRD WORKPIECE CLEANING ROTOR Workpiece cleaning system with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically sets to a 10 mm workpiece thickness and activates the blowing rotors. After the feed belt is fully cleaned, the machine returns to its initial setting. AAT EXTRACTION DAMPER CONTROL Control of extraction dampers via the terminal (24 Volt DC, without extraction dampers included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PCS Uninterruptible power supply for sanding belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – sanding from below Wide belt sanding machine with three sanding units for processing wood or wood-like workpiece surfaces Prepared to accept up to two auxiliary units, such as a cleaning brush, satinizing or structuring brush, and rotating cleaning nozzles. Godpfsyw Ndmjx Agfeir Units: I. R UNIT Sanding unit with automatically adjusting contact roller Profiled steel roller, 240 mm diameter With grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatically adjusting contact roller Rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for installing a pressure beam - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation - Protected storage area on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby operation to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing edges - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – sanding from above Wide belt sander with three sanding units for machining wood or wood-based workpiece surfaces Units as above, additionally: FBM FINISHING BRUSH Brush unit with finishing brush Bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Condition: good (used), functionality: fully functional, overall weight: 105 kg, total height: 1,400 mm, total length: 1,850 mm, total width: 1,150 mm, miscellaneous Hydraulische Baumschere mit Säge für Manitou Gedpfxeyhhvze Agfoir Producing company Dorfmeister Type Holz Fällgreifer SS 550 Height (mm) 1,400 Length (mm) 1,850 Weight (kg) 105 Width (mm) 1,150

Condition: excellent (used), Catalogue no.: 7923 TECHNICAL DATA inlet of loading hopper: 800x600mm outlet for shredded wood: Ø 150mm rotor working width: 590mm main motor: 18.5kW pump motor: 0.75kW number of blades: 14 pcs blade size: 30x30mm sieve: 15/20mm pressure drawer electric auto-reverse dimensions (L/W/H): 1750x1200x2000mm weight: 1100kg ADVANTAGES Gisdpfx Aeyug Euogfor – German-made – DTR technical documentation – pressure drawer – auto-reverse – used chipper, very good condition Net price: 35,900 PLN Net price: 8,550 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of major exchange rate fluctuations, the price may change)

Condition: good (used), Catalogue number 7872 TECHNICAL DATA - Infeed width: 450mm - Infeed height: 200mm - Shaft width: 530mm - Shaft diameter: 480mm - Knife length: 530mm - Number of knives: 2 pcs - Screen size: 50x50mm - Lower toothed feed roller: 2 pcs - Lower shaft motor: 0.75kW - Upper toothed feed roller: - Upper shaft motor: 0.75kW - Main motor: 45kW - Machine dimensions (L/W/H): 3600x1700x1400mm - Weight approx. 2200kg ADVANTAGES – German-made – Not repainted Gisdpfx Ajyaalrogfer - No electrical box – Used chipper, good condition, for inspection Net price: 38,900 PLN Net price: 9,260 EUR (depending on exchange rate 4.2 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 2003, CNC UNICA Wood production year 2003, Uniteam brand since 2016 belongs to Biesse Panel elements are fixed to the table by vacuum and clamps available from both side of machine Machine in good working condition, very fast working in x - y - z axis , ideal for milling in wood , MDF, laminated panels Max. useful working area (X-Y-Z) mm 3440 x 1300 x 200 mm Vertical electrospindle motor power 9 kW Machine size 5000 x 2350 x 2200 mm Gsdpowk Ekcofx Agfoir Weight 4000 kg

Condition: used, Year of construction: 2008, power: 90 kW (122.37 HP), Hacker Rudnick&Enners RE-TH 250/650/5 250 mm height 650 mm width Power 90 kW Cassel metal separator Approx. 40 linear meters of vibrating troughs Gjdpsy Adk Sjfx Agfeir

Condition: like new (used), Year of construction: 2021, As-new Vecoplan VTH 250x650 HxB shredder Power 75 kW Cassel metal detector Including control cabinet Gijdpfey Adk Ejx Agfor

Condition: used, Year of construction: 1981, machine/vehicle number: 2383, table size: 630 x 500 mm saw blade diameter: max. 250 mm Gedpfx Aeb H Infegfjir curring height: 77 mm saw blade rotations: 6300 rpm electric drive: 380 V, 2,2 kW space needed: 800 x 680 x 840 mm

Condition: used, Year of construction: 1997, functionality: fully functional, total width: 1,240 mm, total length: 2,630 mm, total height: 1,400 mm, power of feed motor: 1,500 W, overall weight: 1,600 kg, working range: 140 mm, type of input current: three-phase, input voltage: 400 V, - Polish production - year of production 1997 Gjdpfev N Edbsx Agfeir - DTR - CE TECHNICAL DATA: - range of diameters of processed dowels: 40-140mm - max. diameter of input material: 200mm - min. length of input material: 600mm - max. allowance for processing per side: 30mm - cutter head drive motor: 18.5kW - forward/reverse feed - feed motor: 1.5kW - 3 toothed pulling rollers - 4-knife head - 3 smooth pulling output rollers - dimensions L/W/H: 2630x1240x1400mm - weight: 1600kg

Condition: used, Year of construction: 2005, functionality: fully functional, overall weight: 1,600 kg, working range: 140 mm, type of input current: three-phase, input voltage: 400 V, - Polish production - year of production 2005 - DTR, CE TECHNICAL DATA: Gsdov N Ebajpfx Agfeir - range of diameters of processed dowels: 40-140mm - max. diameter of input material: 200mm - min. length of input material: 600mm - max. allowance for processing per side: 30mm - cutter head drive motor: 18.5kW - forward/reverse feed - feed motor: 1.5kW - 3 toothed pulling rollers - head: 4-knife - 3 smooth pulling output rollers - dimensions length/width/height: 2630x1240x1400mm - weight: 1600kg

Condition: ready for operation (used), Year of construction: 1983, machine/vehicle number: 3601, Saw blade diameter: 300 mm Gsdpfxoyh Hn Hj Agfoir Saw blade speed: 2800 rpm Cutting capacity at 90°: 70 x 120 or 50 x 140 mm Mitre stops left and right: 15/22.5/30/45°, any intermediate position lockable Drive motor: 380 V, 2.2 kW Weight: 50 kg

Condition: used, empty load weight: 4,390 kg, maximum load weight: 13,610 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2018, color: black, Year of construction: 2018, operating hours: 1,71,224 h, mileage: 1,71,224 km, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 69815 Doll, tandem * Year of manufacture: 2018 Godpoyz Ihfjfx Agfoir * ABS (Anti-lock Braking System) * Duomatic air coupling * 15-pin connector plug * Gross vehicle weight: 18,000 kg * Unladen weight: 4,390 kg * Payload: 13,610 kg * Permissible total weight: 18,000 kg * Axle manufacturer: BPW * Manufacturer: BEFA Belziger Fahrzeugbau * Wabco Smartboard * 50 mm towing eye * Coupled at top * Short timber trailer with 4 bolsters and ExTe stakes * 3x protective bolsters * Steel frame cover * Wabco Smartboard, 171,000 km Disclaimer: Subject to alterations, prior sale, and errors. You can find more pictures and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Handling all (export) documentation * Ordering export / customs number plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV inspections, registration service * Transfer of commercial vehicles Speak to our well-trained staff – we are happy to advise you.

Condition: good (used), Year of construction: 1993, Offered for sale is a used Zeno drum chipper, year of manufacture 1993. Type 1400x1600 mm. 97L-4538. Main motor: 75 kW, 1500 rpm. Hydraulic motor: 4 kW. Includes spare gearbox. Giodeyznahjpfx Agfer

Condition: excellent (used), CATALOG NUMBER 7032 TECHNICAL SPECIFICATIONS - loading chute inlet: 1050x610mm - shredded wood outlet: Ø160mm - rotor working width: 580mm - main motor: 18.5kW - pump motor: 0.75kW - number of knives: 14 pcs - knife dimensions: 30x30mm - screen: 15mm x 20mm - pressure drawer - electric autoreverse - dimensions (L/W/H): 2000x1130x1530mm - weight: 970kg Gsdpfx Ajytf Ncegfoir ADVANTAGES – German-made – autoreverse – pressure drawer – very good condition – used chipper Net price: PLN 47,900 Net price: EUR 11,400 Net price converted at exchange rate 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7687 TECHNICAL DATA - Inlet width: 540 mm - Inlet height: 300 mm - Shaft width: 630 mm - Shaft diameter: 700 mm - Knife length: 630 mm - Number of knives: 2 pcs - Screen size: 40x40 mm - Bottom driven serrated shaft - Lower shaft motor: 4 kW - Top driven serrated shaft - Upper shaft motor: 4 kW - Belt feeder - Feeder belt length: 4720 mm - Feeder belt width: 500 mm - Main motor: 75 kW - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 3100x2000x1830 mm Gijdpfx Agsytff Rofjr - Overall feeder dimensions (L/W/H): 4800x780x980 mm - Weight: approx. 5000 kg ADVANTAGES – German-made – Autoreverse – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR depending on exchange rate at 4.2 EUR (Prices may vary in case of significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7176 TECHNICAL DATA - Loading hopper inlet: 1050x600mm - Outlet for shredded wood: 160mm diameter Gjdpjytd S Aofx Agfeir - Rotor working width: 590mm - Main motor: 18.5kW - Pump motor: 0.75kW - Number of knives: 14 pcs - Knife size: 30x30mm - Screen: 10x12mm - Pressing drawer - Electric auto-reverse - Dimensions (LxWxH): 1900x1200x1530mm - Weight: 990kg ADVANTAGES – Auto-reverse – German manufacturing – Unpainted – Like WEIMA WL4 – Pressing drawer – Very good condition – Used shredder Net price: 48,900 PLN Net price: 11,640 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Year of construction: 1990, condition: good (used), Throwing fan ideal for wood chips, with feed conveyor belt approximately 3 m long. Blade span 900 mm, equipped with 11 kW motor. Gsdpfx Agoyy Uzcefsir

Year of construction: 2006, condition: ready for operation (used), General Data Machine weight 6200 kg Main Drive Spindle speed range 8000–24000 Number of axis 3 Movement X-Axis Movement 3000 mm Y-Axis Movement 1200 mm Z-Axis Movement 100 mm Gijdex D Rt Hspfx Agfer This 3-axis IMA BIMA 210 120/300 was manufactured in 2006. It features a large axis travel (X = 3000 mm, Y = 1200 mm, Z = 100 mm), accommodating workpieces up to 2800 mm in length and 1200 mm in width. The main spindle delivers power of 7.5 kW with speeds ranging from 8,000 to 24,000 rpm. It weighs approximately 6200 kg and includes IMA IMATRONIC CNC control. Contact us for more information about this machine. Application Types CNC Wood Machining

Condition: excellent (used), CATALOG NUMBER 7240 TECHNICAL DATA - Infeed width: 400 mm - Infeed height: 210 mm - Shaft width: 530 mm - Shaft diameter: 500 mm - Knife length: 530 mm - Number of knives: 2 pcs Gedpfx Aeyr Rlasgfeir - Screen dimensions: 55x50 mm - 2 toothed feed rollers from below - Lower roller motor approx. 3 kW - Toothed feed roller from above - Upper roller motor 1.5 kW - Feed belt length: 4600 mm - Feed belt width: 400 mm - Main motor: 55 kW - Autoreverse - Feeder dimensions (L/W/H): 4630x620x760 mm - Machine dimensions (L/W/H): 2510x1700x1200 mm - Weight approx. 3500 kg – German made - Autoreverse (adjustable) – Used shredder, in very good condition Net price: 85,900 PLN Net price: 20,450 EUR depending on rate 4.2 EUR (Prices may change in case of significant fluctuations)

Condition: excellent (used), I will sell a stone or granite splitter. - serviced, no leaks in very good condition. For sale: Obolith Steinwerke GmbH - semi-automatic press with roller conveyor I offer a more advanced hydraulic press with automatic collection by roller conveyor, ideal for serial production of precast concrete elements. Specification: • Manufacturer: Obolith Steinwerke GmbH • Model: With roller conveyor • Company inscription: “Stein-reich an Ideen” • Foot operation (start pedal) • Safety switch and external controller Gedpowpxzfofx Agfjir • Electric-hydraulic drive • Solid frame, designed for intensive use Ideal for automation of block, hollow block, curb production processes.

Condition: good (used), Year of construction: 2013, Heating system for fuel wood (wood chips or logs), capable of generating steam up to 150°C, also suitable for hot water applications. Hydraulic feed allows for use of larger fuel materials. Heating capacity up to 850 kW. Location: Austria. Gedjyhlrmjpfx Agfoir

Condition: good (used), functionality: fully functional, Roll slitter type RGS50 – used Condition: good For splitting and crushing wound paper, cardboard, or plastic rolls on cardboard cores - Motor power: 15kW / dual pump 32A / 5-pole – 50Hz-3LNPE - Control: PLC-based, with two-hand safety control - Cutting force: 2x 25t - Blade length: 2500 mm - Max. opening: 1600 mm With roll support stand for increased working height and single-sided roll discharge – roll feed height approx. 1400 mm Gisdpfsyn Aghex Agfsr Factory inspection performed before delivery

Condition: used, Year of construction: 2010, Used machine from 2010, operational, requires inspection and maintenance. Gijdpfxeywhcno Agfer

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Gijdpfx Asx Twcpegfsr

Condition: ready for operation (used), TECHNICAL SPECIFICATIONS: FOR SHREDDING WOOD WASTE SHAFT WIDTH: 800 MM SHAFT DIAMETER: 300 MM NUMBER OF KNIVES: 18 Giedpfx Agoyw I Ahofsr KNIFE DIMENSIONS: 30/30 MM HOPPER: 1000X800X900 MM SCREEN DIAMETER: 15 MM DISCHARGE DIAMETER: 200 MM EMERGENCY STOP SWITCH POWER SUPPLY: 400 V MOTOR POWER: 22 KW OVERALL DIMENSIONS: LENGTH: 2000 MM WIDTH: 1600 MM HEIGHT: 1800 MM