Used Worm for sale (313)

Condition: good (used), Year of construction: 2002, workpiece dia. 40 mm max. module 2 Crodpfx Ajv Ucdvjptog min. module 0,1 workpiece length - max. 665 mm weight 4,5 t spindle bore diameter 30 mm Control Siemens dia. of cutter bearing 20 mm total power requirement 5,5 kW Technical data max. module 2 Pitch 0.5 - 25 mm Number of speeds multi-speed / multiple max. workpiece diameter40 mm max. workpiece length180 mm Milling cutter diameter max.80 mm max. milling cutter width12 mm Z-axis (milling length with counter point)90 mm Z-axis (milling length without counter point)113 mm Milling head swivelling angle30° / 30° Description Gear hobbing and thread cutting machine. LAMBERT - 124 CNC The machine is in a well-maintained condition.

Condition: excellent (used), For sale: a SEW-Eurodrive WA20DT63L4/B03 worm gear motor with a 0.25 kW three-phase motor. The unit is fully functional, tested, and ready for operation. The gear motor is in good technical and visual condition. It shows normal signs of use, as visible in the photos. A power cable with a plug is included. Technical specifications: Manufacturer: SEW-Eurodrive Model: WA20DT63L4/B03 Motor power: 0.25 kW Power supply: 3× 230/400 V, 50 Hz Motor speed: 1300 rpm Output speed: 130 rpm Gear ratio: i = 10.25 Output torque: 16 Nm Protection class: IP54 Insulation class: B Operating mode: S1 Crodpfx Ajzmy Sdopteg Brake: 230 V AC Weight: 10.55 kg Manufacturer: SEW-Eurodrive, Germany The scope of sale includes exactly what is shown in the photos.

Condition: used, Year of construction: 1986, workpiece diameter 460 mm threading length 900 mm Csdpfx Aot H Smtsptsrg thread pitch 100 mm total power requirement 10 kW weight of the machine ca. 8 t dimensions of the machine ca. m

Condition: used, Year of construction: 1979, workpiece diameter 320 mm threading length 300 mm thread pitch mm Codpet Hwnpofx Aptjrg total power requirement 90 kW weight of the machine ca. 12000 kg dimensions of the machine ca. m Thread and worm grinder for steering worms

Condition: used, Year of construction: 2011, workpiece diameter 320 mm threading length 570 mm thread pitch 315 mm total power requirement 17 kW Credjt Hxbdjpfx Apteg weight of the machine ca. 12 t dimensions of the machine ca. m

Condition: good (used), Gear, gears, gear shaft, pinion shaft, spur gear, spur gear, hollow ground gear Credpfjwzudgsx Aptog -Gear: spur gear with hollow ground 63 teeth -Shaft holder: inner Ø 40 x 45 mm -Dimensions: see photos -Dimensions total: Ø 134 x 60 mm -Weight: 1.8 kg

Condition: used, Worm wheel and gear set, edge grinder, edge grinder, sander, drawer grinder, round bar grinder -a set consisting of: 1 worm wheel and 1 gear for oscillation -is a: Original Husband replacement part -for: Husband edge sander -various shapes: single-flight or two-flight available -several sentences: available Crodpfx Apjd Nb Tdstjg -Price: for 1 set -Weight per set: 1.4 kg

Condition: used, max. wheel diameter 0-200 mm Csdpfxstuxa Ue Apterg max. module 25 min. module 0,5

Condition: new, Partially unpacked for photography – unused item from a warehouse clearance. Worm gear motor SA57 DRN80M4/BE1HR/ASE8/TH Csdjzgcaqopfx Aptorg SEW

Condition: used, MONNIER + ZAHNER MZ 120 is a Worm gear cutting machine, built for precision, high accuracy and reliable operation. Capacities: workpiece diameter 2–40 mm, module max 1.5 mm, workpiece length max 250 mm, max cutting length 150 mm, cutter diameter 16–32 mm. Specs: milling spindle speed max 8000 t/min, work piece spindle speed 770 t/min, milling spindle drive 1 kW, max milling head inclination 45°. Accessories: sprinkle cooling device, lamp, switch cabinet air conditioner. Achieves tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Crsdpjza Ukiefx Aptjg

Condition: used, Year of construction: 2012, grinding diameter 200 mm profile depth 30 mm workpiece length - max. 2790 mm grinding length 2310 mm Maximum pitch of the screw -/+ 50 ° Maximum number of gears 1-999 workpiece weight max. 250 kg z-travel 3000 mm x-travel 185 mm max. dia. of grinding wheel 450-330 mm Grinding wheel thickness (with recess) 20-70 mm roll diameter 120 mm Speed of the grinding wheel spindle 1500 - 6000 U/min Workpiece spindle speed 0 - 600 U/min Speed of the pitch axis 0-4 1/min Speed of the dressing spindle 1500-16000 1/min feed speed z-axis 0-10000 mm/min feed speed x-axis 0-10000 mm/min total power requirement 150 kVA control Siemens Sinumerik 840D SL weight of the machine ca. 30 t dimensions of the machine ca. 10,65 x 5,37 x 2,75 m Cedpfx Aoza Hqzjpterg Features/Accessories: - Filtration system: KNOLL VL1500/5000 - many accessories—list to follow - documentation

Condition: excellent (used), workpiece diameter 10 - 250 mm threading length 900 mm thread pitch 0,3 - 100 mm spindle turning speed range 72 / 1700 - 2540 U/min relief of the tap 0,03 - 8 mm clamping length max. 1190 mm Crodoyb S Riepfx Aptog max. module 10 workpiece turning speeds 0,4 - 160 U/min total power requirement 13 kW weight of the machine ca. 7,4 t dimensions of the machine ca. 4,5 x 2,0 x 2,1 m Many accessories.

Condition: ready for operation (used), * Brand: Saxlund * Model: worm conveyor Credpfx Aeywmy Soptjg * A-A Length: 4500 mm, ∅ 400 mm * Driving: 15 kW gear unit. * On stock: 2 pieces

Condition: ready for operation (used), * Brand: Radicon * Model: worm gear uits * Type: BU 12 * Ratio: 30 : 1 Cedpfx Apsywmaxstjrg

Condition: ready for operation (used), functionality: fully functional, metric thread pitch (max.): 500 mm, metric thread pitch (min.): 1 mm, grinding length: 500 mm, grinding wheel diameter: 500 mm, rotational speed (min.): 1 rpm, metric thread diameter (min.): 10 mm, rotational speed (max.): 26 rpm, metric thread diameter (max.): 350 mm, clamping length: 1,200 mm, grinding wheel width: 60 mm, spindle speed (max.): 26 rpm, spindle speed (min.): 1 rpm, grinding spindle speed: 3,000 rpm, grinding spindle motor power: 12,000 W, grinding diameter: 350 mm, grinding wheel speed: 3,000 rpm, type of input current: three-phase, center width: 150 mm, Equipment: rotational speed infinitely variable, KLINGELNBERG HSS 350 Grinding machine – Special offer due to stock clearance 🔥 High-precision CNC grinding machine, perfect for gears, worm screws, and custom parts. Fully functional and ready to use. 🛠 Key technical specifications: • Workpiece diameter (max./min.): 350 mm / 10 mm • Clamping head bore diameter: 130 mm • Max. distance between centers: • With front centering tip: 750 mm • With rear centering tip: 1200 mm • Max. workpiece length: Unlimited • Max. shaft diameter (left/right): 130 mm / 150 mm • Max. grinding length: 500 mm • Max. number of gear teeth: 30 • Module (max./min.): 25 / 0.5 • Pitch (max./min.): 500 / 1 mm • Pressure angle (max./min.): 30° / 0° • Max. helix angle: 45° ⚙️ Grinding System Features: • Grinding wheel diameter (max./min.): 500 mm / 300 mm • Grinding wheel speed (stepless): 75 – 3000 rpm Csdohq Uh Hjpfx Aptorg • Max. cutting speed: 45 m/s • Drive motor power: 12 kW • Workpiece spindle speed (stepless): 1 – 26 rpm 📐 Grinding Wheel Widths: • For thread grinding: 15 mm • For worm screws up to module 12: 25 mm • For module 12 to 20: 40 mm • For module 20 to 25: 60 mm 💻 CNC Control: FANUC Series 21-It ✅ Ideal for: • Gear manufacturers • Worm screw production • Precision machining workshops • Industrial machinery repair 📌 Limited-time offer due to machinery update Take advantage of this opportunity to acquire a high-performance CNC grinding machine with professional specs and immediate availability!

Condition: used, Year of construction: 2012, Control Siemens 840 D weight of the machine ca. 13,5 t dimensions of the machine ca. 7m x 4m x 2,75m m Accessories: Coolant tank Crjdpexh Rqtefx Aptog Grinding wheels Various spare parts Operating and maintenance instructions CE conformity Dimensions: 7x4x2.75 m ( LxWxH) TECHNICAL DATA: Workpiece data: max. outer diameter: 250 mm with max. grinding wheels Ø 450 mm max. diameter to be machined over table: 375 mm Profile depth for dressable grinding wheels: 40 mm max. workpiece length: 3,600 mm max. distance between centers (1): 2,800 mm max. bevel angle: +/- 90° Number of teeth of the workpiece: 1 - 999 max. weight of the workpiece: 250 kg Working area: Center distance between workpiece and tool spindle: 355-170 mm Radial travel: 185 mm Axial travel: 3,000 mm Swivel angle: +/- 90°

Condition: used, maximum load weight: 7,000 kg, overall weight: 9,900 kg, axle configuration: 2 axles, first registration: 09/2013, loading space length: 6,200 mm, loading space width: 2,480 mm, loading space height: 380 mm, Equipment: * Dimensions: L 6,200 mm x W 2,480 mm x H 380 mm, * BPW axles, * Height-adjustable drawbar, * Leaf spring suspension, * Recessed lashing rails, Other: * Payload 7.0 t according to ZLB, * Weight reduction from 11.9 t to 9.9 t without technical modification, Since 1972, we have been your reliable partner for everything related to automobiles/commercial vehicles in 28832 Achim, near the Bremen motorway junction. Behnke Commercial Vehicle Center always has approximately 200 vehicles in stock, including vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at favorable special conditions. If you are interested, we will be happy to prepare an individual offer for you! We are happy to accept your commercial vehicle/construction machinery in part exchange. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does not include a new TÜV inspection. Cedpezw R Svefx Aptjrg Delivery of your "new" commercial vehicle is possible through our external partners for an additional charge. The information provided in advertisements, on the internet, on price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical errors and data transmission errors. The listed equipment may need to be checked separately. Errors and prior sales excepted.

Condition: new, • KSB / amri BOAX-SF butterfly valve • Diameter: DN200 • Working pressure: PN16 • Seal: EPDM (for water, HVAC, industry, fire protection) • Temperature range: up to 130°C • Material: ductile iron with epoxy coating • Actuation: manual lever with locking positions • Valves unused, stock item, year of manufacture 2021 • Ready for operation, 100% functional • Ideal for water, industrial, hydrant, and fire protection installations. - PRICE LISTED PER VALVE. Cedpfx Apjxyq Icotorg

Condition: used, maximum load weight: 2,280 kg, overall weight: 3,000 kg, axle configuration: 2 axles, first registration: 07/2026, loading space length: 5,000 mm, total width: 2,090 mm, Year of construction: 2026, Car transporter with overloader tipping design Comfort package - 100 km/h version - closed aluminium floor - spare wheel with bracket - continuous wheel chocks Low-frame chassis: Axle: continuous maintenance-free commercial axles with reinforced long bearings, hot-dip galvanized Brakes: 4-wheel overrun brake with fully automatic reversing mechanism and parking brake Suspension: individually sprung wheels with progressive effect and shock absorption – excellent running characteristics even under extreme loads; 4 Octagon shock absorbers and 100 km/h specification Wheel bearings: maintenance-free, water-protected, double-row angular ball bearings Drawbar: extra long V-drawbar frame, hot-dip galvanized; reinforced automatic jockey wheel Coupling: automatic coupling with safety and wear indicator Body: reinforced, torsion-resistant tipping frame (hot-dip galvanized) with closed full Alutec profile floor, anti-slip, low-bed version; 12 recessed tie-down rings Tipping mechanism: oil-hydraulic tipping system with 2 lifting cylinders Winch: laterally movable winch stand with electric cable winch Cjdpfx Aszq Iprjpterg Standard accessories: spare wheel mounted under the loading bed with bracket; continuous, longitudinally adjustable and removable wheel chocks Lighting system: lighting according to StVZO. 12 Volt, 13-pin with reversing light; 4-chamber lights with tail, brake, and indicator lights; 2 rear fog lights, 2 triangle reflectors, and license plate lighting; yellow side marker lights left and right; cables and lights mounted protected. Sideways swiveling lighting system including foldable license plate holder with gas strut.

Condition: excellent (used), For sale: sturdy pallet truck with an unusual lattice construction. Ideal for transporting containers, crates, and loads with non-standard dimensions. - Load capacity: 2200 kg - Length: 160 cm - Width: 66 cm - Height: 29 cm, lifts up to 37 cm Csdswz Sa Espfx Apterg - Openwork design – lighter and easier to keep clean - Durable steel frame - Double front and rear wheels for increased stability - Fully functional hydraulic pump - Ergonomic handle with lifting and lowering function Technical condition: good. ///// Price shown is per unit /////

Condition: used, Year of construction: 2010, operating hours: 12,707 h, 2010 | Worms Silentstar 20 TYN | Used Generator Set | 12707 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 3500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 20 inspection points 19 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: It is in good condition, considering the 12,700 hours of operation. During an hour of inspection, I did not notice any problems, but the onsite mechanic reported that the piston rings are worn and the engine stalls under heavy load. Credezg A Izjpfx Aptjg 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40895 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, axle configuration: 2 axles, total width: 25,500 mm, total height: 32,000 mm, Year of construction: 2024, Equipment: ABS, For inquiries regarding the vehicle, please contact Mr. Seidel (phone number available upon request). Wörmann BauTL 105 55/200 low-bed trailer SAE-SMB axles, drum brakes, Knorr ABS, spring brake, 40 mm drawbar, Duomatik, cargo area dimensions: length 5,600 mm, width 1,990 mm, height 400 mm, tire tread: 1st axle 14 mm, 2nd axle 13 mm. Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (phone number available upon request) will be happy to assist you. Crodpfx Apjyfqa Deteg Further information can be found on our website. ... Errors, changes, and prior sale are subject to change!!! - = Further information = Unladen weight: 2,700 kg Payload: 7,800 kg GVWR: 10,500 kg Please contact Tobias Ebert for further information.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 2018/219, hole diameter: 75 mm, number of planer blades: 6, operating speed: 6 mm/s, year of last overhaul: 2018, For sale is a very fast and complete Cambio debarking system! In 2018, the machine was completely overhauled, and since then, it has been professionally maintained and equipped with a new knife ring with 6 cutting knives! The system can be directly integrated into your existing mechanization! Crsdpfxezx Eaqj Aptsg TECHNICAL DETAILS Maximum log diameter: Ø 750 mm Minimum log diameter: 11 cm Shortest log length without an additional feed system: 3 m Shortest log length with an additional feed system: 1.5 m Maximum feed speed: 100 m/min MACHINE DETAILS Rotor motor: 55 kW Feed motor: 11 kW Hydraulic power: 1.5 kW Rotor speed: 220 rpm at 50 Hz Rotor opening: 80 cm Debarking rotor: 6-knife rotor Weight: 10,500 kg EQUIPMENT Complete infeed system Complete outfeed system Electrical system Hydraulics for the infeed rollers New 6-knife rotor from the 2018 overhaul Complete debarking system for integration into an existing mechanization Centering device ZV – 75/2 MA Number of horizontal conical rollers: 2 Drive power per SEW worm gear motor: 1.5 kW EQUIPMENT 2 horizontal conical rollers mounted in pneumatically actuated swivel arms SEW worm gear motors with torque supports in a solid steel design Heavy-duty inlet hopper Complete sensor system Outfeed system AW 800 Drive power: 3.0 kW EQUIPMENT Drive via SEW spur gear motor Machine frame made of welded rectangular tubes for supporting additional machine components Hydraulic shock absorbers

Condition: new, Year of construction: 2025, operating hours: 60 h, functionality: fully functional, workpiece weight (max.): 40,000 kg, wheel width: 3,700 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 500 mm, rotary table diameter: 3,700 mm, position of the milling head: 0,025, table diameter: 2,000 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 6 m/min, total length: 12,000 mm, gear diameter: 400 mm, total height: 5,000 mm, total width: 4,000 mm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, TECHNICAL REQUIREMENTS GEAR HOBBING MACHINE GHM 2500 CNC Description of the main components of the GHM 2500 machine The GHM 2500 CNC gearing milling machine is a machine tool intended for processing by milling toothed wheels and toothed crowns. The machine is equipped with an external teeth milling head - which can process the teeth with an inclination angle from 0 to +/- 45 degrees - and an internal teeth milling head. The machine is composed of a milling unit, a unit for clamping and rotating the workpiece and the pinion axis centering tip. The milling/gearing unit is provided with three translation axes and two rotation axes, as follows: -X axis: longitudinal/radial movement towards the workpiece axis -Y axis: vertical movement of the gearing head -Aza Z: tangential movement of the gearing head -Axis: inclination +/-45 degrees of the gearing head -Axis C: rotation of the main axis of the gearing head Cedpoy A Nglsfx Aptjrg The part fixing unit (the machine plate) has a rotation axis, axis B, for rotating the part. 1. External Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. 2. Internal Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. 3. The Quill - has the role of fixing the high parts, having a vertical displacement stroke. 4. The longitudinal advance mechanism of the upright, X axis – is made by a servo motor 30 Nm_ 3000 rpm, a Gressner worm reducer and a ball screw diam. 80 x 10, accuracy class IT 3. 5. The vertical advance mechanism of the toothing head, Y axis – consisting of a 30 Nm_ 3000 rpm servo motor, a Gressner worm reducer and a ball screw diam 80 x 10, precision class IT3. 6. Plate advance mechanism / plate rotation, C axis – is made with two 50 Nm_ 2000 rpm servo motor, a Gressner worm reducer and a duplex worm that meshes with the worm crown located on the plate. 7. The gearing head tilting mechanism, axis B – is made by a / 20 Nm_3000 rpm servo motor, a Gressner worm reducer and a worm gear-segment worm gear transmission. 8. The axial displacement mechanism of the gear head, Z axis – is made by a 20 Nm_3000 rpm servomotor, an Alpha Getriebe planetary reducer and a ball screw diam. 63 x 10, accuracy class IT3. 9. Top horizontal positioning mechanism, auxiliary axis X1 – a 20 Nm_ 2000 rpm servo motor, an Alpha Getriebe planetary reducer and a ball screw diam 63 x 10, precision class IT5.

Condition: excellent (used), Year of construction: 2014, Roller coater BÜRKLE easy coater RCL 12M and UV system easy cure UV - TRUV with 2 lamps and 2 x roller conveyor BÜRKLE easy coater RCL 1300: For one-sided application on flat surfaces from above Operating side left Touch screen control TP 177 Micro Rubberized application roller Csdpfx Aot Dx U Soptorg Hard chrome-plated metering roller can be sensitively adjusted via worm gearbox Controlled belt transport with exposed counter roller for safe workpiece transport Quick-change system with split bearing and cross-disc coupling for easy changing of the application roller Oscillating squeegee, can be changed quickly for cleaning Separate, infinitely variable FU direct drives for application roller, metering roller and transport Reversible dosing roller Motors and limit switches in Ex version on the machine Non-Ex control cabinet and control panel outside the danger zone on the machine Mobile version Electrical preparation for integrating the roller coating machine into a coating line Technical data Working width: 1300 mm Workpiece height 3 - 80 mm Min. workpiece length 400 mm Rubberized application roller DM 240 mm Chrome-plated metering roller DM 172 mm Transport speed 2 - 15 m/min variable Connected load approx. 2.4 kW Speed of metering roller 1.0 - 3.0 m/min Working height 900 mm (+/- 20) Safety equipment according to CE Incl. switch cabinet Weight approx. 1650 kg UV system e.a.s.y. cure UV - TRUV with 2 lamps One-sided curing of UV-curing lacquers on flat workpieces from above Incl. control cabinet Working width max 1300 mm Workpiece height max 80 mm Number of lamps 2 # - changed 10/2023 UV lamp power 120 W/cm² each Speed 2 - 15 m/min variable Transport: Transport carpet Exhaust air connection 2 x 250 mm Connected load 39 kW Weight approx. 750 kg 2 x roller conveyor RB 1300 Working width 1300 mm length 4000 mm Speed 2 - 15 m/min variable Connected load 2 x 0.37 kW Total system length 12450 mm