Used Worm Gear for sale (7,727)

Condition: used, Gear motor, electric motor, electric gear motor Rcsdpfx Aisc Nvyhoroh -Speed: 11.2/22.6 rpm -Power: 0.37/0.55 kW -Shaft diameter: Ø 30 mm -Construction: B5 angle -Protection class: IP 54 -Dimensions: 490/230/H240 mm -Weight: 33 kg

Condition: used, Gear motor, electric motor -Speed: 56 rpm -Power: 0.3 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Number: 2x motors available Rsdpfxec R R Aze Airsch -Price: per piece -Dimensions: 400/200/H195 mm -Weight: 15 kg

Condition: used, Gear motor, electric motor -Speed: 30.5 rpm -Power: 0.55 kW -Brake: 440 V -Construction: B5 -Shaft diameter: Ø 30 mm Rcodpfx Aec Skt Nsirsh -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 605/250/H215 mm -Weight: 36 kg

Condition: used, Gear motor, electric motor, three-phase motor -Speed: 89 rpm -Power: 0.25 kW -Construction: B5 angle -Shaft diameter: Ø 15 mm -Protection class: IP 54 Rodpfx Aec Sxqhjiroch -Dimensions: 380/200/H150 mm -Weight: 14 kg

Condition: used, Gear motor, electric motor Rcsdpfx Aiec Sxqpsrsh -Speed: 66 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 54 -Number: 1x engine available -Price: per piece -Dimensions: 310/200/H145 mm -Weight: 11 kg

Condition: used, Gear motor, electric motor, three-phase motor Rodpfjc Sxqtex Airsch -Speed: 24/210 rpm -Power: 0.04/0.55 kW -Construction: B3 -Diameter shaft: 24 mm -Protection class: IP 44 -Brake: 220 V -Fan motor: 380 V -Dimensions: 675/200/H210 mm -Weight: 31 kg

Condition: used, Gear motor, electric motor, three-phase motor -Speed: 69 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 55 Rcsdpjc Uuyiofx Aireh -Dimensions: 455/200/H160 mm -Weight: 20 kg

Condition: new, functionality: fully functional, Fervi T047/400VDA geared drill and milling machine, tapping function, 400V, 1.5kW NEW, “CE” certified. Promotional price – limited availability, subject to prior sale. The machine can be used for the following operations: Milling Drilling Tapping. Drilling capacity in cast iron with pre-drilled hole: ø 40 mm. Maximum drilling capacity in steel with pre-drilled hole: ø 32 mm. Milling capacity with insert cutter: ø 80 mm. Milling capacity: ø 25 mm. Tapping capacity: Ø 22 mm. Taper attachment: CM 4. Spindle stroke: 130 mm. Rsdpfx Aijg Npiwerech Spindle housing: ø 76 mm. Column: ø 115 mm. Head tilt: ± 60°. Spindle speed: (12) 75 ÷ 3200 rpm. Three-phase motor: 400 V 50 Hz 1.1 – 1.5 kW. Table dimensions: 585 x 190 mm. T-slot: 12 mm. Base dimensions: 648 x 412 mm. Overall dimensions: 740 x 790 x 1960h mm Weight: 390 Kg.

Condition: as good as new (ex-display), 3 Pcs. “UNUSED – SEW R147 DVE280S4” for Sale Also many other Geared Motors on stock. Manufacturer: SEW Eurodrive Type: R147 DVE280S4 Power: 75 kW Voltage: 230 / 400 V Rcjdpfx Aisglvvuorjh Amperage: 240 / 137 A Hertz: 50 Hz Ratio: 8,26 : 1 RPM in/out: 1.480 / 179 Shaft ø out: 110 mm Weight: 887 / 952 kg

Condition: used, Year of construction: 1979, workpiece diameter 320 mm threading length 300 mm thread pitch mm total power requirement 90 kW Rcedot Hwnpjpfx Airoh weight of the machine ca. 12000 kg dimensions of the machine ca. m Thread and worm grinder for steering worms

Condition: used, Year of construction: 1997, max. wheel diameter 215 mm gear width 40,65 mm max. module total power requirement 20 kW weight of the machine ca. 10 t Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. * Extensive coolant equipment with filter system, band filter, etc. Redpfx Aiet Hwxherech * Driven grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after every dressing. * Gear grinding is effected either in single component operation using a conical cup wheel (Gleason 30°), or with a cylindrical cup wheel. These grinding wheels can be made of CBN, or of traditional "dressable" aluminium oxide material (question of cost). Grinding with a conical grinding wheel is of advantage with regard to heat build-up and quality of tooth contact pattern. Therefore these pairs of bevel gears (for automotive industry) can be generated in high quality with consistent accuracy, economically, and with short set-up times. Condition : Very good - machine can be inspected here under power Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: used, Year of construction: 1983, workpiece diameter 250 mm centre distance 0 mm honing length max. mm max. module 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc. Rcsdpfx Ajt Hwzpoirsh * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped). * Separate honing oil unit with magnetic separator and fine filter. * Mechanical tailstocks for manual loading. * Oil mist separator. * Sliding doors with foot switch. * Separate hydraulic unit. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. We have a large selection of gear machines available. Please let us know your requirements.

Year of construction: 1987, condition: ready for operation (used), Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible. Rsdpforgahxox Airjch

Year of construction: 2019, condition: ready for operation (used), A Frenco workshop gear testing device is available. Bed length: 590mm, min. center distance: 45mm, max. center distance with fine adjustment/without fine adjustment/without intermediate plate: 105mm/155mm/320mm, repeatability: 1.5µm, intermediate plate length: 210mm, max. worm diameter: 78mm, center distance (worm lengths): 0mm-220mm, measuring table dimensions X/Y/Z: 800mm/700mm/940mm. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible. Rsdpfxoy Ax Tho Airoch

Year of construction: 1992, condition: ready for operation (used), Gear diameter range: 10mm-330mm, gear width: 180mm, max. module: 7, min. module: 0.5mm, clamping length: 420mm, number of teeth range: 10-600, helix angle: +/-45°, speed: 1900rpm, grinding wheel diameter range: 280mm-350mm, grinding wheel width range: 84mm-104mm. Machine dimensions X/Y/Z: approx. 4500mm/6000mm/2300mm, weight: approx. 5100kg, control: Fanuc Series 160i-T. Documentation available. An on-site inspection is possible. Rjdpfxezg Iq Io Airech

Condition: used, Gear motor, electric motor, three-phase motor -Speed: 31.5/63 rpm -Power: 0.25/0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm Rcjdec Uv Nmspfx Airoh -Protection class: IP 44/55 -Price: per piece -Number: 2x available -Dimensions: 405/190/H160 mm -Weight: 17 kg

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 120 rpm -Power: 0.25 kW -Diameter: Ø 20 mm -Construction: B3 -Protection class: IP 54 Rsdpfxec Uxwto Airjch -Number: 1x motors available -Price: per piece -Dimensions: 340/190/H175 mm -Weight: 12.5 kg

Condition: used, Gear motor, electric motor, three-phase motor, angular gear motor -Speed: 8.8 rpm Rjdpfx Aiec Uxwuersch -Power: 0.12 kW -Construction: B5 angle -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 330/170/H140 mm -Weight per piece: 13 kg

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 27 rpm -Power: 0.18 kW -Construction: B3 Rcodpfx Aec Uyd Ejiroh -Diameter shaft: 20 mm -Protection class: IP 65 -Price: per piece -Number: 3x available -Dimensions: 370/180/H200 mm -Weight: 14.2 kg

Condition: used, Gear motor, electric motor, three-phase motor Rcjdpoc Uz Husfx Airsh -Power: 0.55 kW -Speed: 110 rpm -Shaft: Ø 20 mm -Construction: B5 angle -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 450/270/H175 mm -Weight: 20 kg

Condition: used, Gear motor, electric motor -Speed: 15.5 rpm -Power: 0.11 kW -Construction: B5 angle -Diameter shaft: Ø 18 mm Rodpfx Aisc Uz Hwjrsch -Protection class: IP 54/65 -Number: 1x geared motors available -Price: per piece -Dimensions: 325/150/H145 mm -Weight: 9.2 kg

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 42 rpm -Power: 0.12 kW -Construction: B5 -Diameter shaft: 16 mm -Protection class: IP 44 -Dimensions: 325/190/H140 mm -Weight: 12 kg Rodpfx Aiec U Dn Isrjch

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 21.5 rpm -Power: 0.075 kW Rsdec U Dn Rspfx Airech -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 370/200/H205 mm -Weight: 18 kg

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 21.5 rpm Rodpec U Dn Tsfx Airjch -Power: 0.075 kW -Construction: B3 -Diameter shaft: 17 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 330/170/H165 mm -Weight: 10 kg

Condition: used, Gear motor, electric motor -Speed: 65 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Number: 1x engine available -Price: per piece Rjdpfoc U Dplex Airsch -Dimensions 360/180/H175 mm -Weight: 12.2 kg