Used Ws 54 for sale (28,323)

Condition: new, Touch - Screen 7” in Color Programming directly via Touch Screen chalk line cutting working according to program 1 pcs pusher for cut off pieces hydraulic saw blade movement Psdpfx Aedify Ijahsgu machine according to CE norm brake motor safety & noise protection hood incl. 1pcs HM saw blade saw motor 7,5 kW, 400 V, 50 Hz saw blade DM 500 mm work piece feeder system with toothed belt feed speed 120 m/ min cutting accuracy +/- 0,8 mm cutting capacity up to 100 cuts/ min min work piece length 550 mm min. work piece width 40 mm Option: - additional infeed table - additional out feed table - TCT saw blade DM 500 mm

Condition: used, Year of construction: 1996, material width 500 mm material thickness 0,3 - 3,0 mm no. of straightening rolls 5 straightening roll diameter 40 mm Psdpfx Aevuum Noahogu number of draw-in rolls 2 diameter of draw-in rolls 80 mm material cross-cut 600 mm² material thickness at 500 mm material width 1,2 mm material thickness at 200 mm material width 3,0 mm power requirement 4,0 kW weight 2,0 t dimensions (WxDxH) 1,5 x 1,5 x 1,9 m with motor, upper straightening rolls individually manually adjustable, neumatic adjustment of the infeed rolls, coil loop control via ultrasonic sensor as is where is, WITHOUT putting into operation

Condition: used, High-frequency ignition device, heating, gas and oil burners -Type: E4718/54 -Dimensions: 85/70/H40 mm Pgedpsd Iy Nrjfx Aaheu -Price: per piece -Number: 12x available -Weight: 0.3 kg/piece

Condition: used, Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake Pgjdpfx Asb A Nlmjaheu -Prisms: 90° 5/8/9/12 mm -Square: 54 x 45 mm -Length: 2550 mm -Weight: 70 kg

Condition: used, Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate -Prism size: 24/70 mm -Dimensions: 80/54/H100 mm -Weight: 2.6 kg Pgjdpodparaofx Aaheu

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set Podpoglwmyofx Aahjgu -Manufacturer: Rohm, base jaws for four-jaw chuck 2 set -Type: ID.: 107546 jaw width 20 mm -Dimensions: see photo techn. drawing -1 set: with soft top jaws, width 30mm -Price/sale: only complete -Dimensions: 200/90/H70 mm -Weight: 4.7 kg

Condition: used, High-frequency ignition device, heating, gas and oil burner, automatic burner control, gas relay, control box, burner control, burner management, UV flame simulator, ignition transformer -Manufacturer: Kromschroder, ignition transformer -Type: E 4718/54 -Number: 1x ignition transformer available -Price: per piece -Dimensions: 65/85/H35 mm -Weight: 0.3 kg/piece Psdpfxsgh Dxpj Aahjgu

Condition: used, Pressure sensor, pressure transmitter, pressure transmitter, pressure switch, pressure transmitter Pgodpelfihgsfx Aahou -Manufacturer: Huba control, pressure transmitter pressure transmitter ovp -Type; P27-K/WS -Input: 0-10 bar -Pressure: max. 20 bar -Number: 3x transmitter available -Price per piece -Dimensions cardboard: 175/70/H45 mm -Weight: 0.2 kg/pc.

Condition: used, Year of construction: 2019, functionality: fully functional, working width: 1,000 mm, grinding width: 1,000 mm, grinding height: 125 mm, height adjustment type: electric, type of input current: three-phase, TECHNICAL SPECIFICATIONS: - Working width: 40-1000 mm - Minimum element length: 470 mm - Min/max pass-through height: 3-125 mm - Infinitely variable feed speed: 6-30 m/min 1. SANDING UNIT: - Spiral-milled steel contact roller, diameter 220 mm - Motor power: 22 kW / 400 V - Sanding belt speed: 19 m/s - Oscillating roller pressure system, rollers coated with vulcanized rubber, first roller equipped with anti-kickback system 2. COMBINATION UNIT WITH PAD: - Spiral rubber roller, diameter 190 mm + steel roller, diameter 100 mm - Motor: 15 kW / 400 V - Sanding belt speed: 18 m/s - Adjustable pressure pad - Pneumatic oscillation - Automatic conveyor belt tracking - PLC digital display - Pneumatic belt tensioning - Pneumatic sanding belt cleaning (both units) - CONTINUOUS FEED SYSTEM, motor power: 2.2 kW - AUTOMATIC GRINDING HEIGHT ADJUSTMENT, 0.37 kW 3. POLISHER UNIT – BRUSH at outfeed, motor power: 0.37 kW - Automatic unit braking (pneumatic brakes) - Air pressure: 8 bar - Air consumption: 0.9 m³/min - Extraction air requirement: 7,500 m³/h - Abrasive belt size (W × L): 1,030 × 2,200 mm - Exhaust air velocity: 25-30 m/s Machine dimensions: - Length: 2,265 mm - Width: 1,740 mm - Height: 2,180 mm Podoxqfxkepfx Aahjgu - Weight: 3,000 kg

Condition: used, LCV-54 Horizon Stream Delivery The Horizon LCV-54 Stream Delivery is an efficient and precise solution for stacking folded printed products, specifically designed for use with Horizon folding machines. Key Features - Stream Delivery: The LCV-54 provides consistent and orderly stacking of folded products, facilitating further processing and increasing efficiency - Height Adjustable: Flexible adjustment of the inlet height allows for optimal integration into various production environments - Wide Compatibility: The LCV-54 is compatible with all Horizon AFC-5xx folding machines Specifications - Inlet Height: Maximum: 911 mm; Minimum: 429 mm Pgedpfxsxr Aabe Aahju - Format Range: Minimum: 128 x 148 mm; Maximum: 558 x 850 mm - Machine Speed: Up to 240 m/min All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, total width: 440 mm, total length: 450 mm, total height: 850 mm, Warming cabinet Temperature adjustable up to 90°C Stainless steel construction Dimensions: 440 x 450 x 850 mm (W x D x H) Pjdpfovdkuusx Aahsgu Connection: 220V, 750 watts Used device, cleaned Many more bakery machines in stock!

Condition: used, Year of construction: 1981, stroke 610 mm strokes per minute 12 daylight - vertical 1450 mm adjustment des Stößels vorhanden mm table size 2400 mm x 1370 mm Pgedpfxsw Sya He Aahou die cushion Nicht vorhanden oder nich Mp 1500 unter Strom bis Oktober

Condition: used, mileage: 1,51,000 km, Year of construction: 2022, Serial number: YV2RT60GXLA85xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21593 Specifications – truck: Mileage: Approx. 151,000 km Transmission: Automatic Full air suspension Engine brake / retarder 8x4 with steering on 4th axle Euro 6, 551 hp 100% front outrigger Flatbed length: approx. 5.8 meters Extension: 50 cm Total length with extension: 6.3 m Boat supports Combo truck – flatbed and fifth wheel included Webasto heater in top cabinet Tow hitch Post rack VBG coupling Remote control for both crane and truck Truck is remote-controlled Includes 2 short sideboards Metalized superstructure Rear support legs Toolboxes Microwave in external cabinet Lightbar (rotating) Camera system License plate box in front Bed Fridge Radio/CD Climate control / AC Full service contract (Gold agreement) Specifications – crane: Fassi F545RA from 2020 Certified until 08.2026 Support legs Remote control Podpfoxp Amcex Aahjgu Reach: 28.2 meters Jib Winch Load chart 6 + 6 + 1 extensions Description:Volvo FH540 Tridem combo truck from 2022.The vehicle has been under a full (Gold) service contract since new.Sold with flatbed and fifth wheel.

Condition: ready for operation (used), Indramat MAC093A-1-WS-2-C/130-A-0/S005 Permanent Magnet Motor SN:MAC093-56210, used, strong signs of wear, 100% functional, scope of delivery as per photos Psdpfx Asi D Inaeahjgu

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, feed length X-axis: 500 mm, feed length Z-axis: 490 mm, travel distance Y-axis: 260 mm, spindle speed (max.): 9,000 rpm, spindle speed (min.): 100 rpm, table length: 880 mm, table width: 320 mm, type of input current: three-phase, total height: 2,250 mm, total length: 2,200 mm, total width: 2,100 mm, overall weight: 2,450 kg, input voltage: 400 V, workpiece weight (max.): 300 kg, Equipment: documentation/manual, CNC Milling machine FEHLMANN Picomax 54 TECHNICAL CHARACTERISTICS: Year of manufacturing: 1999 CNC control: HEIDENHAIN TNC 310 Number of axes: 3 Stroke X axis: 500 [mm] Stroke Y axis: 260 [mm] Stroke Z axis: 490 [mm] Quill stroke: 160 [mm] Max. distance spindle nose / table: 610 [mm] Table length: 880 [mm] Table width: 320 [mm] Max. load on table: 300 [Kg] Spindle type: SF32 Min. spindle speed: 100 [rpm] Max. spindle speed: 9000 [rpm] Lubrication tank capacity: 100 [l] Pgodpsxp H T Tefx Aahsu Centralized lubrication: Automatic - WILLY VOGEL Supply voltage: 400 [V] Dimensions: 2200 x 2100 x 2250 [mm] Weight: 2450 [Kg] INCLUDED EQUIPMENT: x7 SF32 Weldon-type attachments x8 SF32 end mill attachments x2 SF32 to Morse Taper 2 reducing sleeves x1 SF32 to Morse Taper 3 reducing sleeve x6 SF32 ER32 collet chuck attachments x5 SF32 ER25 collet chuck attachments x1 boring head x7 drill chucks Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to brands such as Mazak, DMG Mori, Index Traub, Doosan, Hermle, Chiron, Biglia; also see lathe, mill-turn machine, milling machine.

Condition: used, Year of construction: 1975, 1640 weight 280 kg ja +++++ Please note: Podpfxjh H Eqns Aahegu The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Indramat MAC093A-1-WS-2-C/130-A-0/S005 Permanent Magnet Motor SN:MAC093-58117, used, normal signs of use, 100% functional, scope of delivery as per photos Psdpfx Aoi D Intsahegu

Condition: ready for operation (used), Indramat MAC093A-1-WS-2-C/130-A-0/S005 Permanent Magnet Motor SN:MAC093-58720, used, normal signs of use, 100% functional, scope of delivery as per photos Pgjdpfx Aei D Inzsaheu

Condition: ready for operation (used), Indramat MAC093A-1-WS-2-C/130-A-0/S005 Permanent Magnet Motor SN:MAC093-57852, used, normal signs of use, 100% functional, scope of delivery as per photos Pgodpji D Inlsfx Aahju

Condition: ready for operation (used), Indramat MAC093A-1-WS-2-C/130-A-0/S005 Permanent Magnet Motor SN:MAC093-59481, used, normal signs of use, 100% functional, scope of delivery as per photos Pgodpfsi D In Eex Aahju

Condition: ready for operation (used), Indramat MAC093A-1-WS-2-C/130-A-0/S005 Permanent Magnet Motor SN:MAC093-56032, used, strong signs of use, 100% functional, scope of delivery as per photos Pedpfxoi D Im Ss Aahogu

Condition: ready for operation (used), Indramat MAC093A-1-WS-2-C/130-A-0/S005 Permanent Magnet Motor SN:MAC093-57847, used, normal signs of use, 100% functional, scope of delivery as per photos Psdpfji D Indox Aahogu

Condition: ready for operation (used), Indramat MAC093A-1-WS-2-C/130-A-0/S005 Permanent Magnet Motor SN:MAC093-57848, used, normal signs of use, 100% functional, scope of delivery as per photos Podpsi D Inhefx Aahsgu

Condition: ready for operation (used), Indramat MAC093A-1-WS-2-C/130-A-0/S005 Permanent Magnet Motor SN:MAC093-58374, used, normal signs of use, 100% functional, scope of delivery as per photos Pgjdsi D Inwjpfx Aaheu

Condition: ready for operation (used), Indramat MAC093A-1-WS-2-C/130-A-0/S005 Permanent Magnet Motor SN:MAC093-61917, one connection socket is damaged see photo, used, normal signs of use, 100% functional, scope of delivery as per photos Pgedpfji D In Njx Aaheu