Used Ath W42 for sale (3,627)

Year of construction: 2023, condition: as good as new (ex-display), EXHIBIT DEVICE. Nodpfx Aon Armwshnolf High quality and robust short stroke lift with hydraulic drive, almost maintenance free. Powerful hydraulic unit (230V / C16A) Very low drive-over height of only approx. 105 mm No electrical limit switches installed in the scissors, protective hose over the hydraulic hoses Mechanical synchronization due to bottom cross connection and double hydraulic lowering lock (no safety catch or compressed air required) High lifting force already from zero point Emergency lowering system for lowering in case of power failure Ideally suited for paint and body stores, repairs, brake and tire services Color anthracite gray Lifting capacity 3 t Lifting height 960 mm Drive-up height 105 mm Length of rails 1.450 - 2.040 mm Rail width 530 mm Drive power 2.2 kW Lifting/lowering time approx. 20 s Operating voltage 230V / C16A Foundation min. C20/25 2,500 x 2,500 x 180 mm Can be inspected and tested by appointment.

Year of construction: 2023, condition: as good as new (ex-display), Pneumatically controlled, without electrical components Tool holder for storing impact wrenches and sockets Catch hook to secure the wheels against falling down Lockable castors for locking the wheel holder Nledpfx Ajn Atm Ijhnof Load capacity 65 kg Lifting height 1,2 m Min. height of the room 2,8 m

Condition: used, Pump + Controller ALCATEL/ADIXEM ATH-1300M + ACT-1300M/1600 M: 1 pump type ATH-1300M Maxi pump rotation: 34 000 RPM Flange: DN160/200/250 ISO-K 1 controller type ACT-1300M/1600 M (see technical details on photos) + 1 cable Used, functional, untested equipment Nlsdpfjzwchvox Ahnof

Condition: new, Year of construction: 2026, Drum chipper series ATH S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm Njdpfxjuz Hmxs Ahnolf - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg ATH 330 series - Feed height: 300 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm - Number of feed rollers: 3 pieces - Throughput capacity: up to approx. 70 rm/h * - Chipping length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: ready for operation (used), Year of construction: 2003, operating hours: 5,000 h, functionality: fully functional, number of drawers: 30, Glass storage system with Lisec loading type ATH Storage racks: 30 positions Nlsdpfx Ahoyxnfrjnef Storage racks manually movable

Condition: good (used), functionality: fully functional, Pfeiffer Vacuum Technology AG Turbo Molecular Pump with MAGPOWER Controller, Q2662100, ATH 2300M Model: Q2662100 Type: ATH2300M Condition: Used Technical Data: ATH-M 200–240V AC 50/60Hz General: Magnetically levitated turbo molecular pump Water cooling Magnetic bearing (Maglev), oil-free Speed: 39,000 min⁻¹ Pumping speed N₂: approx. 1,600 l/s Ultimate pressure: < 6 × 10⁻⁹ mbar Motor: 40 Vrms, 1033 Hz, 12 Arms Inlet flange: DN200 ISO-F Outlet flange: DN 40 ISO-KF External electronics (Magpower) Adixen by Pfeiffer Vacuum Controller MAGPOWER S12A P/N: 120917 Rev. G Vi: V2.10.00 / Vn: V2.08.00 Vv: V2.10.00 Vm: V3.11 Accessories: Pfeiffer/Adixen pump cable A215300 - Pump-2-MAGPOWER cable for connection between turbo molecular pumps and control units Power cord: Hubbell HBL4770C (NEMA L7-15P, 277 V / 15 A) Remote control / I/O cable (DB25) Note on item condition: Gases passed: NF₃/N₂ Nljdpfxezh I I Nj Ahnof

Year of construction: 2010, condition: used, Technical details: range of revolution per miute: 180 U/min voltage: 220/ 50 V/Hz machine weight approx.: 150 kg dimension machine xH: 1,2 x 0,8 x 1,3 m total power requirement: 550 kW Nodpfx Aeu Ic Aiehnslf Car tire balancing machine The balancing process is automatic with wheel braking. Program selection can be chosen between 11 balancing methods. Microprocessor controlled LED display with digital weight display. Center hole of rim Ø 40 - 154mm Shafts Ø 36mm Measuring speed 120 rpm. Measuring time 5 - 10 sec. Cone sizes: Ø 44 - 63mm; Ø 61 - 79mm; Ø 77 - 114mm; Ø 107 - 154mm Wheel dimension: Rim width: 1,5" - 18" RimØ max. 10" - 24" Wheel Ø max. 890mm Wheel weight max. 65kg *

Condition: excellent (used), functionality: fully functional, Model: TMBBB662005A Pump Model: TMB10662005A Pump Type: ADIXEN ATH2303M Controller Model: 123744 Controller Type: OBCV4 PROF IP54 Njdpfx Ajx Ap I Tohnolf Firmware: Vi 3.01.00 / Vv 1.08.02 / Vm 3.11 Year of Manufacture: 2018/2019 Operating Hours Pump: approx. 25,000 h

Condition: like new (used), AC 10(2) A, 230V Max. 500–24° Application: Temperature monitoring Width: 67 mm Height: 100 mm Nodpfszd S Sqex Ahnelf Depth: 120 mm Weight: 426 g Condition: Like new

Condition: as good as new (ex-display), Year of construction: 2026, S&F drum chipper type ATH 220x530/3 Demonstration machine / trade fair machine / new machine Solid design with long service life Feed height: 200 mm Feed width: 500 mm Number of chipper knives: 2 pieces Number of counter knives: 1 piece Rotor diameter: 520 mm (solid steel rotor) Number of feed rollers: 3 pieces Throughput rate: up to approx. 20 rm/h * Chipping length: approx. 30 mm Chipper drive power: 45 kW or on request Feed roller drive power: 2 x 2.2 kW Operating/control voltage:400/220 V, 50 Hz Weight: 2,600 kg Nledpfx Ahsw I R Rnonsf *depending on chipper length, kW main motor, number of knives, feed S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: new, Year of construction: 2026, Drum chipper series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 Nedpfxowbv Ero Ahnelf - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: used, Year of construction: 2001, spindle tunring speed 25 - 2.000 U/min greates pass round over bed 400 mm Distance between centers 1.250 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Four machines are available. Price per unit. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Nlsdpfjzwqfisx Ahnof Subject to change, errors in technical data and specifications, and prior sale.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, total width: 2,100 mm, total height: 2,500 mm, total length: 6,000 mm, type of input current: three-phase, input voltage: 380 V, overall weight: 5,000 kg, power: 11 kW (14.96 HP), input frequency: 50 Hz, In working condidion, el motor is replaced with the smaller one for efficiency Nlodpozi A Iyjfx Ahnof

Condition: used, Year of construction: 2021, New: No Colour: Black Empty weight: 718 kg Nlodpfjzvah Dex Ahnjf Dimensions (LxBxH): 121 x 80 x 95 cm - Year: 2021 - Documentation available: No - CE certificate present: No - Serial number: 302505752 - Drive: Electric - Battery information: - └ Brand/Type: 03 EPZS 0465 SC - └ Battery year of construction: 2021 - └ Capacity: 465Ah - └ Battery voltage: 48V - └ Tray length [mm]: 1210 - └ Tray width [mm]: 355 - └ Tray height [mm]: 815 - Type: Battery - Transport dimensions: 1210mm x 800mm x 950mm (l x w x h) - Transport weight [kg]: 718kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, length / mm width / mm Nedpfx Ahezcgiisnslf

Condition: used, diameter 200 mm boring diameter 40 mm - / Nsdpfxjy S Dt Se Ahnelf

Year of construction: 2004, condition: ready for operation (used), controller manufacturer: SIEMENS, overall weight: 1,200 kg, total width: 1,200 mm, total height: 1,900 mm, product length (max.): 2,800 mm, number of axes: 4, This 4-axis WEIRATHER KS1300/4 was manufactured in 2004. It features a maximum milling length of 1300 mm and a milling diameter of 300 mm, making it suitable for various applications such as tool handles and furniture components. The machine operates with a Siemens control system and has a cutter shaft speed of 5300 rpm. If you are looking to get high-quality milling capabilities, consider the WEIRATHER KS1300/4 wood mill we have for sale. Contact us for further details. • Condition: Used • Electrical: 400 V, 50 Hz, 4.0 kW • Number of spindles: 4 • Machining principle: Longitudinal milling • Capabilities: • Max milling length: 1300 mm • Max milling diameter: 300 mm • Max recommended workpiece size: 1300 x 150 mm • Cutter shaft speed: 5300 rpm • Operation/features: Low-vibration, smooth running; high dimensional accuracy and clean surface finish Nlodpszugubsfx Ahnsf • Lubrication: Automatic central lubrication (reduced maintenance) • Production type: Suitable for series production • Workpiece type: Long and 3D-contoured parts • Material suitability: Hardwood, softwood, multiplex, MDF, selected plastics (with suitable cutters) • Typical applications: • Tool handles, hammer/axe/garden tool handles, walking stick handles • Gun stocks, pistol grips, bow risers • Furniture parts: armrests, back rails, handles, decorative moldings, wooden feet • Balusters, posts, handrail and volute segments • Paddle and oar handles and shafts • Consoles, corbels, decorative supports, sculptural elements • Foundry patterns, gauges, templates, fixture components • Knife and tool handles, pestles, kitchen utensil handles • Certification/conformity: CE marked; EC declaration of conformity available • Test run: Possible under power by appointment • Included: Machine as shown Additional equipment • Optional: Additional milling cutters available • Optional: Additional templates (only if shown or explicitly mentioned)

Condition: used, Year of construction: 2020, New: No Colour: Black Empty weight: 712 kg Dimensions (LxBxH): 140 x 80 x 94 cm - Year: 2020 - Documentation available: No - CE certificate present: No - Serial number: 302458549 - Drive: Electric - Battery information: - └ Brand/Type: Marathon 03 EPZS 0465 SLC - └ Battery year of construction: 2020 - └ Capacity: 465Ah - └ Battery voltage: 48V - └ Battery test result: 89% - └ Tray length [mm]: 1210 - └ Tray width [mm]: 275 - └ Tray height [mm]: 800 - Type: Battery - Transport dimensions: 1400mm x 800mm x 945mm (l x w x h) - Transport weight [kg]: 712kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent Nlsdpfxozb Uwxj Ahnsf

Condition: excellent (used), For sale: SEW-EURODRIVE SF31DT71D-4BM geared motor with a 0.37 kW three-phase motor and an integrated 220 V AC electromagnetic brake. The unit is fully functional, tested, and ready for use. The geared motor is in good technical and visual condition. Normal signs of wear and tear resulting from use are visible. Technical data: Manufacturer: SEW-EURODRIVE Type: SF31DT71D-4BM Motor power: 0.37 kW Power supply: 3×220Δ / 380Y V, 50 Hz Motor speed: 1380 rpm Output speed: 42 rpm Torque: 60 Nm Nlodpfjznnm Sjx Ahnsf Brake: 220 V AC Braking torque: 5 Nm Protection class: IP54 Insulation class: B Weight: 16.88 kg Mounting position: IM V1A Year of manufacture: 2002 Country of manufacture: Germany

Condition: used, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Several production lines for sale: 1 MECATHERM line 2 BENIER/KAAK line Nledpfx Ahjzwf Skjnjf 1 FRISTCH line for pastry production Still operational at the factory. Possible to visit before disassembly.

Condition: excellent (used), For sale: a Lenze Extertal geared motor / Germany, with a GST04-2M VBR071C42 cylindrical gearbox and an MDEMA1M071-42 three-phase motor. Nlodpfxezm T Ifj Ahnef The unit is fully functional, tested, and ready for operation. Its technical and visual condition is good – it only shows normal signs of wear resulting from use. The geared motor is ideally suited for driving conveyors, feeders, production machines, packaging equipment, and other industrial applications. Technical data: Manufacturer: Lenze Gearbox model: GST04-2M VBR071C42 Motor type: MDEMA1M071-42 Rated power: 0.55 kW Power supply: 3×230/400 V AC, 50 Hz Motor speed: 1405 rpm Output speed: 421.5 rpm Gear ratio: i = 3.333 Torque: 12 Nm Rated current: 2.40 A (230 V Δ) / 1.40 A (400 V Y) Power factor (cos φ): 0.77 Protection class: IP55 Insulation class: F Mounting type: B3 (flange) Standard: EN 60034

Condition: excellent (used), Saws and tools washing machine Rotatherm Njdpfxjznm Tdo Ahnjlf

Year of construction: 1995, condition: ready for operation (used), Four dissolvers from various manufacturers are available. 1) Niemann NLD I, year of manufacture: 1995. 2) Vollrath VDSVY 15, year of manufacture: 1992, shaft length: 700mm, disk diameter: 400mm, tank volume: 400l, tank diameter: 785mm, tank height: 990mm, outlet diameter: 45mm. 3) Vollrath VDSVY 40, year of construction: 1991, tank volume: 400l, speed: 1000rpm, shaft length: 700mm, disk diameter: 400mm, machine dimensions X/Y/Z: approx. 3200mm/800mm/1200mm. 4) Pendraulic WDV 10, speed: 1800rpm, shaft length: 985mm, disk diameter: 275mm, lifting height: 1250mm, machine dimensions X/Z: 560mm/3450mm, weight: approx. 850kg. On-site inspection is possible. Njdpfsvnuckex Ahnslf

Year of construction: 1972, condition: ready for operation (used), A Vollrath multi-shaft mixing plant is available. Container volume: 700l, max. batch capacity: approx. 700kg, agitator disks: 3, agitator disk diameter: 275mm, speed: 2000rpm, motor power: 36kW, stroke: 950mm, machine dimensions X/Y/Z: approx. 2200mm/1250mm/2400mm, weight: approx. 2600kg. Documentation available. On-site inspection is possible. Nljdpfxewhfn Nj Ahnef

Year of construction: 1992, condition: good (used), Built in: 1992 Nledpfxodyk Rge Ahnof Size: 355 x 700 mm Speed: 3.600 c/h