Used X Ray Viewer for sale (63,406)

Year of construction: 2023, condition: ready for operation (used), Automatic 3D XRAY with laser option for Z reference, without calibration plate from 01/2023 with 1500 h. Bedpfx Aezuwwyskneww

Condition: excellent (used), Year of construction: 2016, operating hours: 10,000 h, functionality: fully functional, Complete painting system comprising two Cefla Flexispray spraying units and three Cross Oven drying ovens. The system was purchased new in 2016 and is customized for painting softwood interior door frames for the Dutch market. The system includes the following units: Cefla Cross Oven #1 Width 320 cm, length 300 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Cefla Flexispray coating machine #1 Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Cefla Cross Oven #2 Width 320 cm, length 390 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Cefla Flexispray coating machine #2 Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Cefla Cross Oven #3 Width 570 cm, length 700 cm Bedpfxjz Hbm Te Aknjww Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. The painting system is installed at the factory and is available for a test run. The system is sold "as-is," and its dismantling, relocation, and transport are the buyer's responsibility. Sales price for the system is 120.000 EUR VAT 0% and is negotiable. If there are several buyers, we reserve rights to sell the system to the highest bidder.

Year of construction: 2006, condition: good (used), For sale are 3 Siemens component placement machines, consisting of: 1 unit X 2 (year of manufacture 2006), model B 348 = €10,900 + VAT 1 unit X 2 (year of manufacture 2006), model B 251 = €10,900 + VAT Both machines have been inspected and tested for full functionality in our workshop. All machines have a valid maintenance report. An on-site inspection is possible and desired. Please refer to the photos for the technical data and configuration of the respective machines. We will also be happy to answer any questions you may have about the machines in person. Upon request, a reference run video is available for each machine. Bjdpfxoyrm E Aj Aknoww We can also carry out modifications for your specific application for an additional charge. The machines are sold without component tables or MTC. Location of the machines: Zollner Elektronik AG / Warehouse Roding / Buchenstraße 18 - 20 / 93426 Roding

Condition: refurbished (used), battery capacity: 930 Ah, battery voltage: 80 V, total height: 880 mm, total length: 2,460 mm, total width: 735 mm, Tested forklift battery for your forklift - 80V 6PZS 930Ah - special tray + 1 year warranty + Including aquamatic system + Including end discharge device & REMA 320 connector (other connectors available on request) + Capacity: minimum 90–100% (C5 capacity protocol will be supplied upon delivery) Bwsdpey Rnpusfx Aknjw + Year of delivery: 2024 Dimensions: Length: 2,460 mm Width: 735 mm Height: 880 mm Weight: approx. 2,300 kg Suitable for the following models and others: Still MX-X Crown TSP 7000 Bulmor EQN 40-50 Caterpillar EP50N Daewoo B40 X Dimos BMS 30/89 Doosan B45X-5 Doosan B50X-5 Hubtex MQ 45 Hubtex MQ 70 Hubtex MSU 40 Hyundai 50B-9 Hyundai B40-9 Steinbock-Boss WA 15 Kalmar EC 4-500 Kalmar ECD 50-6 Kalmar ECD 55-6 Kalmar ECE 50-6 Kalmar ECF 70-6 Kalmar ECG 55-6 Common battery sizes available; please enquire. Transport possible.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total length: 1,310 mm, total width: 390 mm, total height: 40 mm, 120 pcs. Shelves approx. 131 x 39 x 4 cm , SSI Schäfer R3000 , II. choice (new) Shelving racks Workshop shelving , Storage racks , Manual storage , Push-in shelving , Small parts storage B40/392/70 , ZB341315 , ZB9414 Data : - Length: approx. 131.2 cm - Width: approx. 39 cm - Height: approx. 4 cm - Scope: 120 pcs. Shelves SSI Schäfer R3000 - Load : max. 100 kg per shelf - Surface : sendzimir galvanized - II. CHOICE (NEW GOODS)(This is a II. Wahl product, new and unused.II. Choice means there may be dust deposits, minimal scratches or soiling). - ex warehouse Wietmarschen Price : 960,00 € net 1142,40 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Bodpfxj Ahw Rls Aknoww Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total length: 1,280 mm, total width: 390 mm, total height: 40 mm, 120 pcs. Shelves approx. 128 x 39 x 4 cm , SSI Schäfer R3000 , II. choice (new) Shelving racks Workshop shelving , Storage racks , Manual storage , Push-in shelving , Small parts storage B40/392/70 , ZB341315 , ZB9414 Data : - Length: approx. 128.1 cm - Width: approx. 39 cm - Height: approx. 4 cm - Scope: 120 pcs. Shelves SSI Schäfer R3000 - Load : max. 100 kg per shelf - Surface : sendzimir galvanized - II. CHOICE (NEW GOODS)(This is a II. Wahl product, new and unused.II. Choice means there may be dust deposits, minimal scratches or soiling). - ex warehouse Wietmarschen Price : 960,00 € net 1142,40 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : Bodpfs Ahgy Tjx Aknsww If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: excellent (used), For sale is a complete, professional non-destructive testing (NDT) kit using the magnetic particle method (MT) from reputable brands Tiede and Blak-Ray, used in industrial quality control, welding, railway, and power industries. The equipment is fully functional, in very good technical and visual condition, and ready for use. The kit includes: • Tiede FSM-2 – magnetic field strength meter, measurement range ±400 A/cm, 9 V DC power supply • Blak-Ray J-221 – professional UV radiation meter for inspecting UV lamps in NDT testing • Field Indicator MAGNAFLUX – magnetic field indicator for quick induction checks • Measurement probe with cable • Calibration sample and auxiliary accessories • Glass cylinder for indicator fluid • Original transport case with protective foam Application: • Inspection of weld seams • Inspection of shafts, axles, and machine components • Testing of railway, power, and aerospace parts • Quality control in industrial production Bwodpfx Aksz Slhbenew

Condition: like new (used), functionality: fully functional, Year of construction: 2021, load capacity: 1,400 kg, working height: 8,860 mm, operating hours: 290 h, Equipment: documentation/manual, STILL FM – X 14. Reach Truck – 2 pcs. Forklift For sale: Reach trucks, condition like new, only 350 engine hours, year of manufacture 2021. Serviced exclusively by STILL. Detailed description see photo. • Quantity: The offer is for 2 units of STILL FM – X 14 forklifts. Bwedjuvdbuopfx Aknew • Batteries: Attention, 2 batteries are included for each forklift (4 batteries in total) – ideal for multi-shift operations! • Hydraulic telescopic forks extendable from 80 cm to 120 cm!! • Load capacity: 1400 kg Price: €19,900 Top condition, serviced exclusively at STILL !!! STILL FM – X 14. Reach Truck. x 2 pcs.Load capacity: 1400 kgPrice: €15,900Attention: The price includes 2 batteries, making it suitable for multi-shift operations!Detailed Description:Hydraulic telescopic forks: extendable from 80 cm to 120 cm!!Vehicle width: 1,302 mmLoad wheel tires: Diameter 285 mm, polyurethaneDrive wheel tire: Diameter 360 mm, polyurethaneBattery change: Side battery replacement via changeover rack, battery also transportable by craneMast functions: Hydraulic mast reach cross-shift +/- 50 mm, with mast tilt, including necessary hydraulics (4 functions)Fork carriage: Type A, 4 rollers, width of fork carriage: top 840 mm, bottom 755 mmOverall height: 3,300 mmFree lift (H2): 2,740 mmRated lift: 8,300 mmMaximum height (h4): 8,860 mmLoad capacity at maximum lift: 1,350 kgLift height sensor: LED height sensor – preparation for innovative lift height measurement using an LED light beam for precise measurement of optional assistance functionsForks: 1150 x 100 x 40 mm, 2A, LSP 600Hydraulic system: Central position of fork tilt/mast and sideshift selectable via buttonsTilt angle: 0.5/2 degrees forward/backward mast tiltTransport: Mast disassembled before shipping for easier transportOverhead guard: Driver's overhead guard with head paddingOverhead guard dimensions (short version): Overall height: 2200 mm, depth: 645 mmAdditional roof equipment: Overhead guard pillar for mounting MMS terminals or similar auxiliary equipmentInterior rearview mirror: Panoramic mirror on the drive side mounted on the overhead guard for improved visibility when driving out of rack aislesDisplay: Remaining battery charge indicator integrated into the displayDriver's seat: Hydraulically suspended comfort driver's seat MSG 65 with fabric coverSeat adjustments: Infinitely variable weight adjustment, backrest tilt, longitudinal adjustment, and lumbar supportHydraulic control: Joystick 4Plus (central control element combines lift, tilt, and auxiliary hydraulic functions, including horn)Drive activation: Designed as a foot and seat switch combined with single-pedal control and travel direction change via rocker switchSteering: Fully electric 360° steering, height-adjustable steering wheelIgnition switch: Start/Stop buttonAdditional electrical equipment: For external systems (data terminal and scanner) consisting of:Assistance system: Infinitely variable speed reduction depending on the steering angle (CSC - curve speed control)Warning device: STILL SafetyLight 4PLUS with 4 LEDs and a moving light spot in the direction of travel to show the vehicle's approach directionFleet Manager 4.0: Online fleet management via WEB application (GPRS - SIM card, access via employee cards, data, reports. Batteries: 2 pcs 48 V / 4PzS 620 Ah Charging station / garage + pallet jack + roller conveyors for battery replacement free of charge when purchasing both units for FMX and likewise free of charge for RX.

Condition: used, Year of construction: 2009, BAZ cover for Maho DMC63V, year of manufacture 2009 (includes new milling spindle + Y-axis spindle) Heidenhain control BAZ DMC 63 V, year of manufacture 2001 Bedpfxjw D Sp Ee Aknsww

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 10 h, cutting height (max.): 510 mm, cutting width (max.): 510 mm, rotational speed (max.): 80 rpm, rotational speed (min.): 20 rpm, controller model: Siemens SIMATIC S7-1200, For sale is a brand new, unused semi-automatic band saw! The machine is sold with a six-month warranty! TECHNICAL DETAILS Cutting height: 510 mm Cutting width: 510 mm Bwsdj Aggbxepfx Aknow Speed range: 20 – 80 RPM Speed infinitely adjustable Band saw width: 54 mm Band saw thickness: 1.6 mm Swivel range: 90 ° Table height: 810 mm MACHINE DETAILS Control model: Siemens SIMATIC S7-1200 Control type: PLC-controlled Operating mode: semi-automatic Main drive power: 7.5 kW Power: 10.20 hp Hydraulic feed Planetary gearbox Input voltage: 400 V Input frequency: 50 Hz Input current type: Three-phase Dimensions & Weight Dimensions (L x W x H): 1,200 x 3,200 x 3,000 mm Total weight: 4,500 kg EQUIPMENT Heavy-duty double-column construction CE marking Documentation / Manual Lighting Motor brake Further technical data and information can be found in the attached documents.

Condition: ready for operation (used), functionality: fully functional, total length: 2,700 mm, total height: 120 mm, total width: 50 mm, load capacity: 3,000 kg, Meta Multipal Beams – approx. 270 cm | Inspected & Used The Meta Multipal beams with an approximate length of 270 cm are from inspected used stocks and are available for immediate delivery from our warehouse. They are ideal for expanding existing Meta pallet racking and heavy-duty shelves. Additionally, they are compatible with the Jungheinrich system Type S – making them flexible for various warehousing requirements. Thanks to their robust construction and original design, they are reliable for daily warehouse operations. Specifications: - Length: 270 cm - Height: 12 cm - Width: 5 cm - Racking system: Meta - Type: Multipal - Load capacity: up to 3000 kg - Includes safety pins - Original part no.: 402 6212 441291 - Used items, available from stock, immediate delivery possible. -- MULTIPLE UNITS IMMEDIATELY AVAILABLE -- Price: €25.00 net €29.75 gross You will receive an invoice with VAT shown separately. HAVEN’T FOUND THE RIGHT SOLUTION YET? Visit our website for a quick overview of many offers and product variations! Beds Ahprnopfx Aknoww Transport: Delivery is available upon request by our partner freight forwarder, with costs depending on your postal code. Assembly: Our trained personnel are available to assist you professionally with the assembly and disassembly of your equipment as needed. Our recommendation: Let us know your requirements... We are happy to assist you in realizing your projects, from planning and ordering to assembly. INTERESTED OR HAVE QUESTIONS? Feel free to contact us by message or phone call. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 15:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electricity performance: 37,5weight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE!CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons) (Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Backgauge: CNC-controlled 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Machine fully complies with CE standards new pump installed The machine is being sold in its current condition. Bwodpfx Aksvfy Sxjnew The machine was purchased from an insolvency sale and transported to our warehouse. The basic up and down functions have been tested and are working. Apart from that, we have no further information regarding the technical condition or overall functionality of the machine. An on-site inspection can be arranged upon request. The machine is sold as is, without any warranty or guarantee. One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.

Condition: used, Year of construction: 2008, Cinch Mill 40 milling center ( L et W Machine Tools , Taiwan ) Year 2008 Fagor control X Y Z 1700x820x700 Spindle 6000 rpm Spindle taper BT40 Magazine 24 tools Bwodpfsvwg Tmjx Aknsw

Condition: excellent (used), Year of construction: 2014, 4 Qty Stainless Steel Hoppers 3 Qty Hoppers Dimensions 700mm x 1200mm x 1220mm H. 1 Qty Hopper dimensions 1200mm x 1200mm x 1220mm H With manual gate valve Gas strut opening lid Internal stainless mesh screen Mobile on lockable castors Some with pneumatic vibration device. Bwodpfx Aksurf Twenjw Some with level sensor device In excellent condition

Condition: good (used), Year of construction: 1995, sheet thickness (max.): 6,040 mm, Sheet width 6040 mm Sheet thickness 4 mm Total power requirement 12 kW Bedpfxj Ahyv Ds Aknjww Machine weight approx. 22 t Additional information - Specification - Back stop - Roll shelf

Condition: used, maximum load weight: 15,390 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2018, total width: 2,480 mm, Year of construction: 2018, Equipment: ABS, Fliegl ZWP 180 ZWP 2-axle platform trailer – AS NEW ! 4 units available! Fliegl platform trailer ZWP 180 ? First registration: 06/2018 ? Vehicle dimensions: 9,150 mm x 2,480 mm (L x W) ? Fully air-suspended ? Lifting/lowering system ? ABS ? 2 x air-suspended BPW axles – 9 tons ? Gross vehicle weight: 18,000 kg ? Unladen weight: 2,610 kg ? Payload: 15,390 kg ? Tire size front/rear: 385/65 R22.5 ? Tire tread depth: 8/8 / 7/7 mm Bwjdps Ahqc Uefx Aknsw - German vehicles! - First owner! - TÜV/inspection: on request and, if applicable, with an additional charge: new!! Errors and prior sale excepted!

Condition: like new (used), Year of construction: 2017, load capacity: 1,000 kg, lifting height: 7,150 mm, construction height: 2,920 mm, operating hours: 204 h, fuel type: electric, mast type: triplex, Manufacturer + model: STILL EK-X 24 Mast: 3F7150 ID: 26112.5012 Category: Used Mast: 3F Lowered height: 2920 mm Lifting height: 7150 mm Capacity: 1000 kg Bwsdpfx Akjz Tdzbsnew Platform height: 6600 mm Picking height: 8200 mm Initialized: Yes Year: 2017 Hours: 204 hours Capacity: 24V / 1240Ah Options: FULL options!! - Triplex mast - FFL - Adjustable forks!! - Special SAFETY gates!! - Side guide / Rail guidance - (including end-of-travel braking under the battery) Truck width = 1480 mm Cabin width = 1400 mm Complete, LIKE NEW!!

Condition: used, Year of construction: 2019, operating hours: 15,770 h, load capacity: 3,500 kg, lifting height: 4,500 mm, fuel type: gas, gearing type: automatic, Equipment: cabin, Still RX 70 - 35 T HYBRID LPG forklift, with side shifter and fork adjustment Bjdo Ahp Skepfx Akneww ?? 10 units in stock: RX 70-35 and RX 70-50 ?? * Power: 38 kW / 52 hp * Self-weight: 5,430 kg * Load capacity: 3,500 kg * Full cabin * Heater * DUPLEX mounting for 2 gas cylinders Lifting unit: * Duplex mast * Lifting height: 4,500 mm * Side shifter * Fork adjustment * 3+4 control circuits * Includes forks!! Lighting: * 4-way spotlights at the front * 4-way spotlights at the rear - German forklifts! - Used in a large company, with complete maintenance records! - First owner! - Ready for use! Errors and prior sale excepted!

Condition: new, Year of construction: 2025, operating hours: 3 h, functionality: fully functional, feed rate X-axis: 7 m/min, workpiece weight (max.): 1,000 kg, working width: 2,500 mm, volume flow: 8,000 m³/h, year of last overhaul: 2025, overall weight: 3,200 kg, type of input current: three-phase, passage height: 210 mm, total height: 2,350 mm, total length: 2,450 mm, total width: 3,500 mm, working height: 950 mm, Ceetec DuoFlex Spray – The Coating Machine for Joiners, Furniture Makers, CLT and Glulam BSH Suppliers, and much more cases. Wherever a solid, straightforward, yet exceptionally well-equipped machine is needed, the DuoFlex Spray surface spray machine comes into play. Spraying doesn’t have to be complicated – not when you have a robust, long-lasting machine (made in Denmark, electronics from Germany – Beckhoff and others) that puts the operator at the center of it all. Everything is intuitive and easy to use, yet you get features you’ll struggle to find elsewhere – or only in significantly more expensive machines. Here are some hard facts about the DuoFlex Spray: Bodpjffc Tyjfx Akneww 1. Color changes in just 3–5 minutes 2. System volume only 2.5–3L of paint/lacquer 3. Suitable for both solvent-based and water-based coatings 4. Two fully separated circuits – ideal for solvent/water or clear/topcoat separation 5. Maximum reproducibility – thanks to smart programming that stores all key parameters automatically 6. Quick to learn – after just 4–6 hours of training, even a baker can spray better than a manual sprayer with 10 years’ experience 7. Modular expandability – drying systems, sanding units, preheating, robotic integration – all from a single source 8. Service that speaks your language – our owner spent nearly 10 years as a coatings manager and brings hands-on expertise to your shop. The machines are extremely durable, and if anything should go wrong, we maintain well-stocked spare parts warehouses in both Germany and Denmark Processing dimensions for the DuoFlex Spray: 1. Standard: 1,300 mm width × 200 mm height 2. Larger: 1,800 mm width × 200 mm height 3. Up to: 3,200 mm width × 330 mm height Length: from 250 mm up to virtually unlimited. If you want to coat CLT ceiling panels 16, 18, or 20 meters long, we’ll simply build the right handling system for you. Sound interesting? Would you like to try the machine in our technical center? Do you have specific requirements and wonder if we can deliver? Then I’ll be happy to help you personally. Best regards, Martin Bruhn Owner, Bruhn Lackieranlagen // Exclusive Sales Partner of Ceetec A/S – Middelfart, Denmark

Year of construction: 2014, condition: ready for operation (used), functionality: fully functional, X-Floc EM400/440 Insulation Blowing Machine Professional high-performance blowing machine designed for processing a wide range of loose insulation and fibre materials. Suitable for open blowing, dry injection, damp-spray applications and material conveying, it can be used both on construction sites and as part of a stationary production system. Bsdpfxezlggxo Aknoww The machine is equipped with a large loading hopper of approximately 1,000 litres, capable of holding around 5–6 standard bags of insulation material. Four rotating shredder shafts progressively break up and condition the compacted fibres before transferring them into the rotary airlock. The adjustable airlock feed gate allows precise control of the material flow. Depending on the version and material used, the EM400/440 can reach a processing capacity of up to approximately 1,600 kg/h. The adjustable air system delivers a maximum pressure of 540 mbar, with an air volume of approximately 100–430 m³/h for the EM400 and up to 100–680 m³/h for the EM440. Main features: Suitable for different insulation and fibre materials Two-stage material conditioning system Four high-speed shredder shafts Approx. 1,000-litre loading hopper Adjustable material flow with 10 feed-gate positions Low-dust loading system with transparent strip curtains Connection for external dust extraction Remote adjustment of air and material parameters Robust, low-maintenance industrial construction Easy access to internal components for servicing Direct NW 76 mm hose connection Suitable for mobile or stationary applications The machine can be operated using a cable or optional wireless remote control, allowing the operator to adjust air output, material supply and pressure-control functions directly from the working area. Technical data: Processing capacity: up to approx. 1,600 kg/h Maximum pressure: 540 mbar Hopper volume: approx. 1,000 litres Shredder shafts: 4 Dimensions: approx. 1,285 × 1,000 × 1,800 mm Filling height: approx. 1,250 mm Hose outlet: NW 76 mm EM400 power: approx. 7.5 kW EM440 power: approx. 10.5 kW Weight: approx. 425 kg for EM400 / 445 kg for EM440 Maximum conveying height: approx. 20–45 m for EM400 / 20–60 m for EM440 Optional equipment may include a wireless remote control, pressure-relief valve, internal or external air amplifier, suction drum and dust-extraction system.

Condition: not inspected (used), Year of construction: 2022, load capacity: 2,000 kg, Mobile Portal Crane ABUS LPK IF INTERESTED, FURTHER IDENTICAL CRANES ARE AVAILABLE! Year of Manufacture: 2022 Machine Number: 153-002730 Condition: Uninspected Delivery Terms: Free loading onto truck Location: 21493 Elmenhorst-Lanken Availability: Immediately - by arrangement Payment Terms: Prepayment - by bank transfer Internal No.: 174-2 Technical Data: Crane bridge / crossbeam: approx. 3,280 mm Crane bridge profile height: approx. 240 mm Length of longitudinal beams: approx. 4,600 mm Length of running/foot beams: approx. 1,980 mm Height of running/foot beams incl. rollers: approx. 400 mm Lifting Gear: ABUS Electric Chain Hoist Type: GM 6 2000.3-2 Load capacity: 2,000 kg Lifting speed: 0.80 / 3.00 m/min Power supply: 400 V / 50 Hz Equipment: Electrically driven chain hoist / load hook (left/right) IF INTERESTED, FURTHER IDENTICAL CRANES ARE AVAILABLE! Scope of delivery: Existing documentation as shown in the images Dimensions & Weights: Installation dimensions L x W x H approx.: 3600 x 2000 x 5000 mm Transport dimensions L x W x H approx.: 4600 x 1500 x 1500 mm Weight approx.: 500 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional Notes: ►Upon request, we can offer transport to the destination. ►The quoted price is net, plus VAT. ►The goods are sold with the exclusion of any warranty. Bsdpfxszqfn Eo Aknoww ►Technical data subject to change without notice. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: used, Year of construction: 2002, functionality: fully functional, Used Horizon VAC-100 4-Tower Collating System with ST-20 Bodpfx Aoz Synuskneww Configuration & Year of Manufacture  Horizon VAC-100: 2 towers — Year: 2002  Horizon VAC-100: 2 towers — Year: 2010  Horizon ST-20: 1 unit — Year: 2021 The system consists of four VAC-100 collating towers and one ST-20. The individual units were manufactured in different years, as listed above.

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 04/2008, total length: 13,880 mm, total width: 2,550 mm, wheelbase: 9,010 mm, color: other, = Additional options and accessories = - Additional steering axle - Rear doors Bsdpfxjzl Ub Rs Akneww = More information = Year of construction: 2008 Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg; Steering Empty weight: 7.850 kg Carrying capacity: 25.150 kg GVW: 33.000 kg Technical condition: very good Visual appearance: very good Registration number: OK-80-KD = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, maximum load weight: 29,403 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2016, next inspection (TÜV): 09/2026, loading space length: 13,620 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2016, Equipment: ABS, KRONE SD flatbed semi-trailer/tautliner with COIL – trough !! 20 units available !! ? ABS / EBS ? Lifting axle ? Very good wooden floor! ? Document holder ? Rear portal doors ? Load securing CODE 12642 - XL ? Storage box on the left ? Disc brakes Bjdpfo Ahp Ttex Aknoww ? 3 x air-suspended KRONE axles ? Lifting/lowering system ? Internal dimensions: 13,620 x 2,490 x 2,700 mm (L x W x H) ? GVWR: 36,000 kg (39,000 kg technically possible!) ? Unladen weight: 7,520 kg ? Steel rims ? Tires 385/65 R22.5 - German semi-trailers! - Valid inspection: 09/26 – upon request and for an additional charge: new! Errors and prior sale excepted!

Condition: new, Year of construction: 2025, functionality: fully functional, repeat accuracy: 0.025 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 310 mm, positioning accuracy: 0.025 mm, type of input current: three-phase, input voltage: 380 V, sheet thickness aluminum (max.): 300 mm, operating speed: 15,000 mm/s, pressure: 4,150 bar, warranty duration: 24 months, cutting speed: 15,000 mm/min, travel speed (max.): 20,000 mm/min, table load: 1,200 kg, year of last overhaul: 2025, product height (max.): 300 mm, Brand new Waterjet Cutting Machine 💧 Waterjet Cutting Machine X-JET 2040 – PROFESSIONAL – Made in Poland 🇵🇱 🔧 Polish manufacturing – top quality and precision! The modern, fully professional X-JET waterjet cutter is designed for the most demanding customers. Thanks to the latest technologies and a rigid frame design, the machine guarantees excellent cutting quality, high precision, and long-term durability. 🔹 Key Features: Bodov Tmxujpfx Aknoww Working area (3-axis): 2000 x 4000 mm X/Y traverse speed: up to 20,000 mm/min Positioning accuracy: ±0.025 mm Repeatability: ±0.025 mm Max. table load: 1200 kg/m² Sealed linear motion units + servo drives Centralized electronic lubrication system Advanced CNC control + IGEMS CAD/CAM 2D/3D Optional 💥 5X Cutting Head: Taper angle compensation and bevel cutting up to 45° Drive: Harmonic Drive + Spinea TS Pneumatic on/off valve with diamond nozzle Automatic cutting height adjustment Z-axis and tool calibration 🧠 Intelligent Systems: 12 MP camera Automatic tool angle adjustment system Precision 5x cut calibration system 💦 High-pressure Pump: Max. working pressure: 4150 bar (60,000 psi) Constant pressure: 3792 bar (55,000 psi) Flow rate: up to 3.8 l/min Nozzle diameter: 0.10–0.35 mm High-quality intensifier and proportional valve Quiet operation and touchscreen control ⚙️ Additional Equipment: Automatic abrasive removal system – WAWE 170 Professional abrasive feeder – DUNA 1100 Water treatment system with reverse osmosis Efficient sludge extractor – 170 l/min 📍 Made in Poland – local product with global capabilities. 💬 Feel free to contact us! We are happy to send you the full technical documentation and prepare a tailored offer. Custom machine dimensions and any configuration available on request. *(Images are for reference only; the offer refers to a 1.5x3m, 3-axis machine.)