Used Zimmermann Fz 30 for sale (27)

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 15,000 rpm, controller model: Heidenhain TNC430 PA, Submitting a bid obligates you to collect the machine on time, during calendar week 25! TECHNICAL DETAILS Travel range X-axis: 3,000 mm Travel range Y-axis: 2,360 mm Travel range Z-axis: 1,000 mm Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Rapid traverse rate X-axis: 20 m/min Rapid traverse rate Y-axis: 20 m/min Rapid traverse rate Z-axis: 20 m/min Spindle speed (max.): 15,000 rpm Torque: 57 Nm Spindle power: 18 kW Work table (L x W x H): 4,500 x 2,000 x 400 mm T-slots, lengthwise: 18H12 Distance between T-slots: 250 mm Tool interface: HSK 63 F Tool clamping: hydraulic MACHINE DETAILS Bdsdey Sxkrspfx Apvof Control system: Heidenhain TNC430 PA Type of input current: Three-phase Power requirement: 20 kW Frequency: 50 Hz Voltage: 400 V Fuse rating: 63 A Dimensions & Weight Machine footprint without control cabinet (L x W x H): 6,000 x 3,500 x 4,050 mm Total weight: 15,000 kg EQUIPMENT Spindle speed infinitely adjustable Tool changer TT140 measuring probe Note: Machine without enclosure. The zero-point clamping plates and other accessories shown in the pictures are not included in the scope of delivery.

Condition: excellent (used), Year of construction: 2014, x-travel 2500 mm y-travel 3000 mm z-travel 1250 mm Control HEIDENHAIN iTNC530 spindle turning speed - stepless 22000 U/min c-axis +-300° milling-head swivable +/- +-110° tool taper HSK 63 A tool change unit 50 Pos. total power requirement 130 kW weight of the machine ca. 53,5 t dimensions of the machine ca. 7,6 x 7,3 x 5,7 m This ZIMMERMANN FZ33c is available immediately and in good condition. - NEW spindle received 6 months ago Description: Technical specifications of the machine and working ranges X-axis 2500 mm Y-axis 3000 mm Z-axis 1250 mm A-axis ± 110 ° C-axis ± 300 ° Includes vibration sensor Includes bearing temperature sensor Includes rotary joint for internal tool magazine feed (IKZ) 5-axis path control: Heidenhain iTNC 530/handwheel HR520, 15” TFT colour display Extraction system LTA Industrial Air Cleaning Machine room canopy 50-position tool changer, chain magazine, behind the machine Chip conveyor, ejection 60° to the left, front-facing No probe available!!! Blum Laser tool measurement ‘Control NT-Micro’ Clamping table Length x width x height 2500 x 3250 x 400 mm Table load 8000 kg/m² (max. 16000 kg) T-slots, arranged longitudinally 18H12 T-slot spacing 250 mm Dimensions, weights Footprint (excluding peripheral equipment) approx. 7600 x 7300 x 5650 mm Total weight approx. 53500 kg Electrical connection data Voltage (three-phase) 400 V Frequency 50 Hz Compressed air connection (to be provided by customer) Required air pressure 6 bar Average air consumption approx. 15 m³/h (depending on machine configuration) Linear axis drives Feed rate X, Y, Z axes 60 m/min Axis acceleration X, Y, Z axes up to 5 m/s² Rotary axis drives – VH30 Feed rate A- and C-axis 360 °/s Axis acceleration A- and C-axis 700 °/s² Resolution A- and C-axis 0.0001 Accuracies of linear axes – in accordance with VDI / DGQ 3441 Positioning accuracy X-axis P= 0.026 mm Y-axis P= 0.028 mm Z-axis P= 0.020 mm Repeatability X-axis Ps= 0.015 mm Y-axis Ps= 0.016 mm Z-axis Ps= 0.010 mm Resolution of measuring systems (interpol) A-, C-axis 0.0001° Accuracy of rotary axes – VH30 Positioning accuracy A- and C-axis P= 12" = 0.0033° Repeatability A- and C-axis Ps= 8" = 0.0022° VH30 milling head 2-axis milling head: VH30, Bjdpfx Apezak Hgjvjdf Siemens Weiss milling spindle Spindle power S1 (100% duty cycle) 60 kW, Spindle speed 22,000 rpm, 95 Nm, HSK-A63 External dimensions of fork head L x W approx. 500 x 600 mm Nominal torque of rotary axes Control loop A: min. 1,200 Nm C: min. 1,047 Nm Clamped A and C axes: 3,000 Nm (Continuous grease lubrication with automatic relubrication system) Swivel axis – spindle nose 326 mm Tool holder HSK 63 A Tool clamping Spring clamp Tool unclamping Hydraulic Permissible tool weight 4.5 kg (manufacturer’s specification) Coolant supply External and internal Coolant/lubricant supply (emulsion) at the front of the milling spindle with belt filter system Volume 1500 l Pump 1: 40 l/min at 20 bar Pump 2: 20 l/min at 40 bar, Air blow at the front of the milling spindle

Condition: used, Year of construction: 1986, table size cross table 490 x 400 mm axis stroke (X,Y,Z) 320x385x430 mm reus 560 - 14000 U/min tool taper SK 30 table load max. 100 kg Bsdpfxoxbh E Ue Apvedf Weight ca. 500 kg

Condition: ready for operation (used), Year of construction: 2002, operating hours: 4,486 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,500 mm, rotational speed (max.): 18,000 rpm, controller model: Fidia C20 mit Bedienteil HPX, The machine is in fully operational, very good condition. It has been dismantled, is in storage, and available immediately! TECHNICAL DETAILS Travel range X-axis: 3,000 mm Travel range Y-axis: 2,360 mm Travel range Z-axis: 1,500 mm Rotary axis A: 105° Rotary axis C: 300° Clamping area: 5,000 mm x 2,000 mm Table load: 15,000 kg/m² T-slot spacing: 18H12 / 250 mm Feed rate X, Y, Z axes: 20 m/min Axis acceleration X, Y, Z axes: 1.5 m/s² Max. spindle speed: 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Bdodpfx Apjywgyrovef MACHINE DETAILS Spindle power: 28 kW Connected load: 40 kW Main fuse: 80 A Spindle hours: 4,486 h Machine hours: 146,161 h Dimensions & Weight Space required for machine with peripherals (L x W x H): 7,300 x 5,600 x 5,600 mm Machine weight: 16,500 kg EQUIPMENT 3-sided enclosure, without extraction ducts

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,000 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 18,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 30 m/min, torque: 38 Nm, overall weight: 65,000 kg, Initial commissioning: 2012 Control system: Heidenhain iTNC 530 X-axis: approx. 7,000 mm Y-axis: approx. 3,500 mm Z-axis: approx. 2,000 mm A-axis: ± 100° C-axis: ± 360° Clamping table: 6,000 x 3,000 x 160 mm (sunken) with 18H12 T-slots / 250 mm spacing 2-axis milling head VH 12 Spindle power: 24 kW Spindle speed: max. 18,000 rpm Torque: max. 38 Nm Tool holder: HSK 63A Linear axis drives Feed rate X, Y, Z axes: up to 50 m/min / 30 m/min Axis acceleration X, Y, Z axes: up to 2.5 m/s² Connection data Bdedpfx Apjyrdc Ejvof Voltage: 400 V Frequency: 50 Hz Main fuse: 200 A Power consumption: 85 kVA Dimensions, weights Machine footprint without peripherals: approx. 10,000 x 6,650 x 5,900 mm Total weight: approx. 65,000 kg Additional equipment - Double-sided access doors - 10-position tool changer Optional at extra cost: - Wireless probe - Heidenhain remote diagnostics Machine condition Fully functional, very good condition. Can be inspected under power. !!! The machine was completely mechanically overhauled in 2022 !!!

Condition: excellent (used), Year of construction: 2014, First commissioning: 2014 Control: Heidenhain iTNC 530 HSCI including HR 520 handwheel Machine hours Power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives Feed speed X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Electrical specifications Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filter system - 50-position chain-type tool changer - Work area enclosure - Chip conveyor - Emulsion mist extraction system from LTA Optional at extra cost: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Bsdpfx Aewywciepvsdf Fully functional, in excellent condition and available for inspection under power! Images are sample photos from a new machine of this type. Original images to follow shortly!

Condition: excellent (used), Year of construction: 2012, First commissioned: 2012 Control: Heidenhain iTNC 530 including handwheel HR 420 X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,500 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 5,700 x 3,000 x 300 mm 2-axis milling head VH20 Spindle power: 40 kW Spindle speed: max. 25,000 min-1 Torque: 48 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Bdsdpfovy A Tnjx Apvof Blowing air: external Drives linear axes Feed rate X, Y axis: up to 50 m/min Feed speed Z-axis: up to 30 m/min Axis acceleration X-, Y-, Z-axis: up to 2.5 m/s2 Connection data Connection power: 190 kVa Back-up fuse: approx. 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 7,700 x 5,850 mm Total weight: approx. 63,000 kg Color Housing, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 bright green Additional equipment - Coolant supply with belt filter system - 30-way chain tool changer - Work area cover - Chip conveyor, right side Optional for an additional charge: - BLUM laser Condition of the machine Fully functional, very good condition. Already dismantled and stored.

Year of construction: 1985, condition: ready for operation (used), A conventional milling machine Zimmermann including a Heidenhain digital display is available. Table dimensions X/Y: 1400mm/800mm, tool holder: SK40, travel X/Y/Z: 1600mm/900mm/300mm, spindle-table distance range: 30mm-1180mm, milling head swivel: 45°/90°, feed rate: 2400mm/min, speed: 2800rpm. Machine dimensions X/Y/Z: approx. 3600mm/3000mm/3150mm, weight: approx. 5000kg. Documentation available. An on-site inspection is possible. Bdjdpfx Aey Eqtpspvsf

Year of construction: 1985, condition: ready for operation (used), A conventional lathe Zimmermann with some modification measures is available. Turning diameter over bed: 1000mm, turning length: 430mm, distance between centers: 1000mm, 3-support travel: 500mm/300mm/200mm, chuck diameter: 250mm. Documentation available. An on-site inspection is possible. Bdedpfjy Eqtvsx Apvof

Year of construction: 1994, condition: excellent (used), Dear customers, we are currently offering a universal milling machine for model and mold making, manufactured by Zimmermann. Here are the technical specifications of the machine: Work table: 750 x 500 mm Longitudinal travel: 810 mm Transverse travel: 315 mm Milling height: 0 - 470 mm T-slots: 6 x 14 mm Spindle speeds: 56 - 4,500 rpm Tool holder: ISO40 / SK40 - Digital display with Heidenhain scales - Motorized vertical adjustment of the table Space requirement: 2,000 x 2,500 x 2,400 mm Weight: 2,400 kg !! Condition and scope: see pictures !! Price plus VAT, which will be shown separately on the invoice. Worldwide transport is possible for an additional fee! If you have any questions, please do not hesitate to contact us. Bjdpfxezlibfe Apvodf

Condition: refurbished (used), Year of construction: 2026, Dear customers, we currently offer a refurbished table-mounted milling machine, type FZ0, from the manufacturer F. Zimmermann. Here are the technical specifications of the machine: Table size: 430 x 240 mm T-slots: 12 mm / 3 pieces Travel in X-axis: 240 mm Travel in Y-axis: 160 mm Rotational movement: 360° Swivel: 2x90° Spindle power: 0.25 kW Speed: 22,000 rpm Bdedpfx Ajzliahepvof Tool holder: collet chuck with locknut, Ø 8 mm - CE marking - Support/cross table - Milling guard made of Plexiglas - original base cabinet (optional) Dimensions: 1,100 x 1,180 x 1,760 mm Weight: 180 kg The machine has been painted in RAL 7035 light gray, the drives have been cleaned, inspected, and fitted with a new belt. You will receive a set of milling tools with the machine. VAT will be shown separately on the invoice. Shipping is possible for an additional charge. If you have any questions, please do not hesitate to contact us!

Condition: excellent (used), Year of construction: 2008, Universal Table Router FZ0 by Zimmermann Modelling milling machine with variable-speed Bosch motor GGS 27 LC Ideally suited for model making and tool & die applications. Drive motor: 230 Volt, 0.6 kW Adjustable spindle speed approx. 12,000 to 27,000 rpm Machine table approx. 590 x 420 mm Unit swivels 90 degrees to both sides Longitudinal fence with fine adjustment Extraction hood and safety guard Collet chucks for 6 mm and 8 mm Includes the cutters and milling bits shown in the pictures Comes with lockable base cabinet, 2 drawers and 1 door; key included The base cabinet was modified by the previous owner with an aluminium sheet and angles to provide an integrated extraction option, see photos Waldmann surface-mounted lamp with magnifier attachment Original paint, partially touched up CE mark Very well-maintained machine from the prototype manufacturing section of a motorsport department at a Wolfsburg automotive manufacturer. Evidently, it has seen very little use so far. Bdodpfx Apsw Ip Dgjvof Machine dimensions approx. 680 x 600 x 780 mm (L x W x H) Cabinet dimensions approx. 600 x 620 x 880 mm (L x W x H) Weight approx. 190 kg The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse – see “more offers from this seller.”

Year of construction: 1997, condition: excellent (used), machine/vehicle number: 1095, Dear Customers Currently we offer you a universal milling machine for the model and mold making of the brand Zimmermann. Here are the technical data of the machine: Work table: 630 x 490 mm Support table: 490 x 400 mm Round movement: 360 ° Pivoting: 2x 90 ° Tension groove: 14 x 25 mm Bdodpfx Aoxy Ntqspvef Power: 1,1 kW Speeds: 560 - 14,000 rpm Tool holder: ISO30 / SK30 - Motorbrake - motor-driven height adjustment - digital read-out with Heidenhain meassuring system - cabinet Space required: 1,400 x 1,520 x 1,970 mm Weight: 790 kg The machine was cleaned completely including the support table. The technical as well as optical condition of the machine is top! We look forward to your questions and inquiries.

Condition: refurbished (used), Year of construction: 2025, Dear customers, we are currently offering, upon request/order, a refurbished table router, type FZ0 by F. Zimmermann. Here are the machine's technical specifications: Worktable: 590 x 420 mm Rotary movement: 360° Tilting: 2x90° Spindle power: 0.25 kW Speed: 22,000 rpm Bdodpfx Apoxlzg Hovef Tool holder: collet chuck with clamping nut Ø 8 mm - CE marking - Vernier stop - Plexiglas milling guard - Original base cabinet (optional) Dimensions: 1,100 x 1,180 x 1,760 mm Weight: 120 kg The machine has been repainted in RAL 7035 light grey, drives have been cleaned, inspected, and equipped with a new belt. With the machine, you will also receive an angle table and a set of milling tools – in other words, a complete setup! VAT is itemized separately on the invoice. Shipping available at an additional charge. Current delivery time: 6 weeks If you have any questions, please feel free to contact us!

Condition: refurbished (used), Year of construction: 2026, Dear customers, we currently offer you a fully refurbished profile belt grinding machine for model and mold making, manufactured by Zimmermann. Here are the technical specifications of a machine of the PS1/2 type: Table length: 650 mm Table width: 600 mm Rail width: 15 / 30 / 40 / 50 mm Belt length: 2,700 / 3,200 mm Grinding height: 350 mm Table swivel: 45 / 20° Voltage: 400V Power: 1.4 / 1.85 kW Speed: 1,500 / 3,000 rpm Belt speed: 12 / 25 m/s Dust extraction nozzle diameter: 80 mm Dimensions: 1,200 x 2,450 x 2,100 mm Weight: 390 kg After the refurbishment, the machines feature an updated electrical system including a motor brake, are painted in RAL 7035 light gray, have refurbished idler and drive rollers installed, and come with a complete set of accessories. Bjdpfx Ajzlidaepvedf We look forward to receiving your questions and inquiries.

Condition: refurbished (used), Year of construction: 2026, Dear customers, we currently offer you a fully refurbished profile belt grinding machine for model and mold making, manufactured by Zimmermann. Here are the technical specifications of a machine of the PS1 type: Table length: 650 mm Bdodezlicvjpfx Apvjf Table width: 600 mm Rail width: 15 / 30 / 40 / 50 mm Belt length: 2,700 mm Grinding height: 350 mm Table swivel: 45 / 20° Voltage: 400V Power: 1.4 / 1.85 kW Speed: 1,500 / 3,000 rpm Belt speed: 12 / 25 m/s Dust extraction port diameter: 80 mm Dimensions: 1,200 x 2,450 x 1,500 mm Weight: 320 kg After the overhaul, the machines feature a revised electrical system including a motor brake, are painted in RAL 7035 light gray, have refurbished idler and drive rollers, and come with a complete set of accessories. We look forward to receiving your questions and inquiries.

Condition: refurbished (used), Year of construction: 2026, Dear customers, We are currently offering an oscillating roller sanding machine from Zimmermann, specifically designed for model and mould making. Below are the technical specifications of the machine: Table length: 1,075 mm Table width: 615 mm Table height above floor: 820 mm Roller diameter: 20–250 mm Voltage: 400V Power: 1.4 / 1.8 kW Speed: 1,400 / 2,800 rpm Extraction port diameter: 100 mm Dimensions: 1,450 x 680 x 1,120 mm Weight: 450 kg The machine has been newly painted in RAL 7035 light grey. A completely new control cabinet has been built and installed, i.e. the entire electrical system is brand new. For machine safety, a motor brake and an emergency stop system have been installed. Mechanical parts were either purchased from the manufacturer or custom-made. The scope of delivery includes a roller of your choice as well as sanding sleeves and other machine-specific accessories. This machine is sold with a 6-month warranty! Price plus VAT; VAT will be itemised separately on the invoice. Free insured shipping within Germany! Bedezlibxspfx Apvjdf If you have any questions, please feel free to contact us.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, Dear Customers, We are currently offering a fully refurbished Zimmermann oscillating drum sanding machine, ideal for model and mold making. Below are the technical specifications for type OZS: Table length: 500 mm Table width: 500 mm Table height above floor: 1,050 mm Drum diameter: 20-120 mm Voltage: 400V Power: 1.4 / 1.8 kW Speed: 1,400 / 2,800 rpm Extraction port diameter: 100 mm Equipped with emergency stop Dimensions: 840 x 810 x 1,300 mm Weight: 180 kg The machine has been newly repainted in RAL 7035 light grey. A completely new control cabinet was built and installed, meaning the entire electrical system is brand new. For machine safety, a motor brake and emergency stop system have been integrated. Bodpfxezlh Uwo Apvodf Mechanical components were either sourced from the manufacturer or custom fabricated. Included in the scope of supply are one sanding drum of your choice, sanding sleeves, and other machine-specific accessories. The machine is sold with a 6-month warranty! Price is plus VAT, which will be shown separately on the invoice. Free and insured shipping within Germany! If you have any questions, please feel free to contact us.

Condition: refurbished (used), Year of construction: 2026, Dear customers, we are currently offering a fully refurbished vertical belt sanding machine for model and mold making by F. Zimmermann. Here are the machine’s technical specifications: Sanding belt width: 250 mm Sanding height: 400 mm Belt length: 2,400 mm Sanding speed: 18 m/s Worktable: 750 x 350 mm Swivel range: 30/45° Power: 4.0 kW Speed: 1,400 rpm Extraction port diameter: 120 mm Including angle stop Including sanding belts Foot emergency stop Dimensions: 990 x 850 x 1,740 mm Weight: 470 kg The machine has been painted in RAL 7035 light grey, the sanding plate is completely new, the roller bearings have been replaced, and various other small parts have been exchanged. We have also installed a motor brake and several additional electrical components for enhanced machine safety. The machine comes with a 6-month warranty. Price plus VAT, which will be separately itemized on the invoice. Bodpfx Aozlh Udepvsdf If you have any questions, please feel free to contact us.

Condition: good (used), 1 used rotary surface grinding machine Manufacturer: Zimmermann Type: SZ2 Year of manufacture: 1989 Technical data: Double-sided rotary surface grinding machine Grinding wheel: 2 x Ø 600 mm Swiveling worktables Motor power: approx. 1.5 kW Speed: approx. 1,000 rpm Clockwise/counterclockwise rotation Robust industrial design Weight: approx. 350 kg Bjdpfx Aozlg Upopvjdf The machine is in used, fully functional condition with the usual signs of wear and tear consistent with its age. It is ready for immediate use and is ideally suited for daily use in a workshop. Inspection and a test run can be arranged at any time.

Condition: used, Year of construction: 1999, Dear customers currently we offer a disc sanding machine of the brand Zimmermann. Here are some technical datas: Disc diameter: 600mm Table length: 755mm Table width: 285 mm Table tilling up and down: 30/45° Protractor: 60/60° Power: 3,5 kW Speed: 1.500 rpm Dimensions: L 90 cm x B 65 cm x H 130 cm Weight: 290 kg with protractor We are looking forward to your questions and inquiries. Bedpjywx Disfx Apvjdf

Condition: ready for operation (used), Year of construction: 1972, Disc diameter: 600 mm Grinding table size: 670 x 280 mm Grinding table swivels up/down: 30/45° Grinding disc drive motor: 1.5 kW Space required: 870 x 650 x 1280 mm including extraction SZ 1, 380 V, 1.5 kW Bdedpfxjvkdqis Apvjf

Condition: excellent (used), Year of construction: 2011, Profile Belt Sander, PS0 Rasprofil by Zimmermann with Extensive Accessories Belt sander with tilting table and additional fittings for rasping. Ideally suited for model making and mold construction. Designed for precision contour sanding. All settings made via clamping lever and fine adjustment. Drive motor: 400 Volt, 1.1 kW Table tiltable up to 45 degrees forwards and up to 20 degrees backwards Bdsdpfx Ajw Iqvqepvof Machine table approx. 400 x 400 mm Upper extraction arm foldable for sanding large parts. By locking the freestanding profile rail in the upper machine section, high angular accuracy can be achieved. Includes three reversible profile rails (15, 30, and 40 mm, straight and radius profiles). Several sanding belts included, see photos Three unused rasps Extraction connection 80 mm Waldmann mounted work light Original paint, touched up in places CE marking Very well-maintained machine from prototype manufacturing in the motorsport department of a Wolfsburg automotive manufacturer. Apparent minimal previous usage. Dimensions approx. 600 x 850 x 1350 mm (LxWxH). Weight approx. 220 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'other offers from this seller.'

Condition: refurbished (used), Dear customers, we currently offer idler rollers and drive rollers for profile belt grinding machines made by F. Zimmermann. The rollers have been newly coated with a more robust material for improved durability, then ground to a convex shape, and fitted with new bearings. You will therefore receive fully refurbished rollers in exchange for your defective rollers! The rollers are suitable for the following machine types: Zimmermann PS0, regardless of year of manufacture Zimmermann PS1, regardless of year of manufacture Zimmermann PS1/2, regardless of year of manufacture Zimmermann PS S, regardless of year of manufacture When placing an order, please always specify the machine type and indicate which rollers you need and in what quantity. We have everything in stock and can deliver quickly. Bsdpjd S Eb Asfx Apvodf If you have any further questions, please do not hesitate to contact me!

Condition: excellent (used), Set of profile sanding rails for Zimmermann profile sanding machine PS 0, or PS 0 with rasp profile Includes one reversible rail each in widths 15, 30, and 40 mm, with one straight side and one side with a radius. The rails appear practically as new, see photos. Bdodpfx Asw Nizbjpvof Also included: 1 box each of P80 sanding belts in widths 15, 30, and 40 mm Sanding belt length: 1985 mm, suitable for Zimmermann PS0 Sale only as a complete set, no individual sales possible. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and available in our warehouse, see "other offers by this supplier."