Double-Chamber

Multivac C500

Condition: good (used), Multivac C500 Double Chamber vacuummachine This one with vacuum and gas flushing system. Double chamber machines from MULTIVAC are easy to operate, clean and service. They offer the highest output on the smallest footprint and also provide impressive performance over their entire machine life thanks to their production output and pack quality. The evacuation and gas flushing processes are pressure-controlled and thus guarantee reproducible packing results. MC 06 machine control with precise vacuum measurement in the chamber. Brand: Multivac Model: C500 Pedozp Eh Nspfx Alwsgt Power: 400V / 50Hz / 3Phase / 7kW Vacuum Pump: Busch 160m3/h Seal bar length: 660 mm (x4) Chamber Dimensions: 740×660 mm (x2) Machine dimensions (LxWxH): 1.600x950x1.060 mm Machine weight: 650 kg.

Year of construction: 2007, condition: excellent (used), Vacuum packaging machine VC999 07P, year of manufacture: 2007. Connection: 400V. Chamber dimensions approximately 88x50x15 cm, equipped with 2x CLFH 220 Rietschle vacuum pumps. Year of manufacture: 1998, power: 2x 5.5 kW. Psdpfef Srcfex Alwsgt In very good condition, fully functional.

Condition: ready for operation (used), functionality: fully functional, The Multivac C500 vacuum packaging machine packages food products in vacuum bags. Its dual-chamber design allows the operator to load one chamber while the second chamber completes the packaging cycle. This setup improves workflow continuity and reduces waiting times between cycles. The machine is suitable for meat processing plants, delicatessen shops, cheese factories, industrial kitchens, and manufacturers of ready meals. It can package fresh or processed meat cuts, processed meat products, cheeses, prepared dishes, and other products compatible with bag packaging. How does the Multivac C500 work? The operator places the product in a bag and then positions the opening on the sealing bar. They then move the tilting lid towards the loaded chamber. The pump removes the air from the bag and the chamber. When the machine reaches the programmed vacuum level, it seals the bag before gradually reintroducing air into the chamber. This process limits the amount of oxygen around the product, protecting the food from oxidation, dehydration, and external contamination. It also facilitates storage, ripening, transport, and the organization of the various production stages. However, the shelf life depends on the product, the bag, the temperature, and the hygiene regulations applied by the user. Dual chamber and bag sealing The C500 has two chambers and a moving lid. This configuration allows for quick alternation between the two work areas. The MULTIVAC documentation also indicates two sealing bars of 650 mm per chamber. The manufacturer offers several sealing systems depending on the configuration: single sealing, double sealing, or sealing with trimming of the bag excess. The machine presented should therefore be visually inspected to precisely identify the installed system. Similarly, the vacuum pump plate will confirm its model and actual capacity. Integration into a packaging line Pjdpszpwk Nefx Alwegt The Multivac C500 vacuum packaging machine can operate as a stand-alone machine. It can also be integrated into a line including preparation tables, conveyors, a shrink tank, or a labeling area. Vacuum packaging helps manufacturers standardize their packaging and better protect products between production and shipment. For shrink bags, a shrink tank can complement the machine to tighten the film around the product. MULTIVAC also offers several accessories to facilitate filling and handling of the bags. Technical specifications: Manufacturer and model: MULTIVAC C500 Year and machine number: 1998 – 083 Configuration: dual chamber with two sealing bars of 650 mm per chamber Power supply: 400 V – 3 phases – 50 Hz Power and current: 8.5 kW – 24 A QJ0DB9K7

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total length: 630 mm, total height: 1,500 mm, total width: 900 mm, input voltage: 400 V, Packer Brand Henkelman Model Vortex Pgjdjvz Tqtopfx Alwet Year of production 2010 Voltage 400 V, 3 Ph, 50 Hz, 6 A, Power 4 W, with BUSCH vacuum pump - RB 0021 B 3Z4 Dimensions of the packer: 630 mm x 900 mm x 1500 mm 2 forms: - 2 x 160 mm x 210 mm - 6 x 100 mm x 80 mm

Condition: ready for operation (used), Year of construction: 2019, Complete cup filling and sealing machine (year of manufacture 2019) with inkjet encoding, conveyor belt extension and dosing bar (incl. perlator inserts, year of manufacture 2020) used in the cheese industry. Filling temperature: Cold filling, round plastic bucket/plastic bucket/plastic bucket 2: Diameter 175mm x height 131mm/diameter 104mm x height 55mm or 65mm/diameter 227mm x height 194mm. Dimensions X/Y/Z and weight, without outfeed conveyor belt and shifting shank: 2200mm/2200mm/3200mm and approx. 3500kg. Podpor Dd H Sofx Alwjgt

Condition: new, Year of construction: 2026, _____Standard Equipment / Technical Data Engine Rated Power (ISO) 68 / 90 kW / hp at 2200 rpm Max. Power 71 / 95 kW / hp at 2000 rpm Max. Torque 405 Nm at 1500 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4 cylinders / 4.4l, 4V, STAGE 5 Controlled Turbocharger, SCR - Catalyst DOC - Diesel Oxidation Catalyst SCR Particulate Filter Catalyst Hood - single-piece, foldable Exhaust pipe on the right side in front of the cab Fuel tank capacity 198 liters / AdBlue 18 liters Podpszpcvdefx Alwogt Transmission / PTO 16/16-speed Dyna-4, SpeedMatching, 40 km/h PowerControl operation on the left with load-sensing reversing gearbox, clutch operation, 4-stage load shifting with 1 lever, T-shuttle lever in the side console Partially automatic group shifting and Autotronic monitoring Permanently cooled wet disc clutches with independent lubrication system PTO: 540 / 540E / 1000, stub shaft 1 3/8", 6-spline Electrical engagement in the cab PTO START/STOP button on the rear, left fender Hydraulics / Lifting System Open Center system Quick coupler Cat. 2 Upper link control 4,300 daN maximum lifting force, 2 external lifting cylinders Adjustable lifting struts on both sides EHR with external control on both fenders Quick adjustable automatic drawbar coupling Electrical system Thermostart, 120 A alternator Power supply (12 Volt) for external devices with connector Axles / Additional Weights All-wheel drive front axle with switchable differential lock Rear axle ND with flange hub Oil-cooled disc brakes Front fender, width adjusted, rotatable Rear fender width 1.80 m, without extensions Front weight carrier with integrated drawbar and drawbar pin Driver's Seat Vibration-damped standard cab with standard roof, ventilation and heating Integrated safety frame with tinted glazing Doors on both sides with safety steps Steering column adjustable in height and inclination Air-suspended driver's seat with armrests, swivel adapter, safety belt Exterior & wide-angle mirrors Interior mirror Analog-digital instrument panel (SIS) Radio preparation with antenna and speakers 4 work lights front and rear on the cab roof 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders Special Equipment: Fuel tank protection PowerControl & Brake on Neutral (clutch effect) 100 l/min, Open Center hydraulic system oil flow coupling (58+42 l/min) Front loader quick coupling system Leak oil collector on quick couplers 3 control valves: 1x MR, dw, EA, SST + 1x dw, NL, SST + 1x dw, NL, SST + free return 2.5t front lift, 1 hydraulic line set, electrical socket MF front loader preparation: foundation set, hydraulic set, electrical control via joystick, PTO: 540/540E, flanged, 6-spline, internal engagement Rear fender extensions - 100mm Tires 480/70R38 & 380/70R28 Air conditioning Cab with mechanical suspension Telescopic exterior & wide-angle mirrors Passenger seat with belt Air-suspended driver's seat, automatic adjustment with safety belt, swivel adapter and armrests Rear window wiper / washer system Without MF Connect (MF Telemetry System)

Condition: excellent (used), functionality: fully functional, Handtmann VF616 Filling and Portioning Line with Loma Metal Detector and AL Line Complete Handtmann line for filling, portioning, linking, and hanging of meat products, equipped with a Loma metal detector and accessories for use with 200-liter meat trolleys. The set includes: 1. Handtmann vacuum filler with lift for 200 l trolleys Brand: Handtmann Model: VF616 Serial No.: 26190 Year of manufacture: 2009 Power supply: 400 V, 3 Ph, 50 Hz Current consumption: 17.3 A Power: 12.0 kW Vacuum pump: Busch, type KC 0016 E Vacuum pump serial no.: V19220646 Performance: 19 m³/h Dimensions: 1900 × 1350 × 2120 mm 2. Stainless steel meat trolley Capacity: 200 liters 3. Loma pipeline metal detector with Handtmann linking attachment Brand: Loma Detector type: IQ² Serial No.: MHPLEU-36885 Date of manufacture: 21.10.2004 Power supply: 230 V, 1 Ph, 50 Hz Current consumption: 0.2 A Throughput diameter: Ø 55 mm Handtmann attachment type: 34-5 No.: 13059 Overall dimensions: 500 × 600 × 500 mm 4. Handtmann mobile linking and hanging line Linking machine: Brand: Handtmann Model: 216-21 No.: 1041 Year of manufacture: 2003 Power supply: 400 V, 3 Ph, 50 Hz Current consumption: 3.5 A Power: 2.5 kW Dimensions: 1500 × 700 × 1250 mm Psdpsxk T Iyefx Alwjgt Hanging line: Brand: Handtmann Model: 220-16 No.: 1643 Year of manufacture: 2007 Dimensions: 2650 × 550 × 1300 mm The integrated Handtmann system with Loma metal detector is designed for the automatic filling, portioning, linking, and hanging of sausages. The system connects the VF616 vacuum filler with the IQ² metal detector and the linking and hanging module, delivering high efficiency and process precision.

Condition: good (used), Year of construction: 2009, D2 Europack Tray / Pot Sealer Fully stainless steel In good working condition Pedpfx Aet Tyivjlwegt

Condition: good (used), Laksa KU130 Bowl cutter Stainless bowl cutter, 130L capacity bowl, six blade assembly, with discharge arm, mitsubishi touch screen hmi controls, modified to run on an AC motor with Allen Bradley Powerflex753 inverter drive, with manual, 3Ph Pgodpfx Alowaan Iswjt

Condition: new, PRICE: 5000 EUR Mobile lift for cutter cart Made of stainless steel Lifting weight: 200 kg Dimensions: 1160x800x2900mm Pedpfx Aljvtzzkewsgt Electrical power: 0.75kW Voltage: 220V 50Hz