Chamber filter press

Netzsch Kammerfilterpresse 1500/90

Condition: new, Year of construction: 2024, Shreddershafts Type Hammel 850 ; Olnova 85 --- 6pc 8/8 disc with bearings, ready for installation Optionally available for wood, waste or metal version with matching sidecombs Delivery Time: After response Bjdpfx Ashpipdeddedk WERT GmbH is a metalworking company specializing in the development and production of twin-shaft shredding tools for renowned brands such as Hammel, Arjes, Linder, Eggersmann, Terex, and Keestrac. With an in-house design department and a highly skilled team, we provide customized, innovative solutions that meet the highest quality standards. Our goal is to continuously meet the individual needs of our clients through technological excellence and improvement. We serve companies across various sectors, including waste management, recycling, and mechanical engineering, and place great importance on long-term partnerships. With our reliable and high-performance shredding solutions, we help our clients increase their efficiency and competitiveness.

Year of construction: 2004, condition: used, Max. operating temperature: 1270°C, roller dimensions: 45x35x2350mm, roller distance: 60mm, min. format: 150x150mm, working width: 1200mm, length: 80.000mm, including documentation. Bdedpfeh Dbrhex Addek

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass removal of dust Construction description: Bdsdpfx Adjua D Aledsk The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Condition: used, functionality: unexamined, Year of construction: 2013, Metso cone crusher HP3 16 tons Bdedpfxewyu Ivo Addok The machine will remain in operation until 12/2025 and can be inspected available from 1/2026

Condition: ready for operation (used), Year of construction: 1991, | Model | Lokomo C-140B Jaw Crusher | | Feed Opening (Width × Height) | approx. 1400 mm × 1000 mm | | Maximum Feed Size | approx. 600–800 mm | Bodpfx Adoxcg Spededk | Strength of Material to be Crushed (e.g. rock) | ~200 MPa (varies significantly depending on material) | | Capacity (Throughput) | estimated 400 t/h | | Motor Power | 200 kW | | Weight Range | 55 tons |

Condition: ready for operation (used), Year of construction: 1999, IMMEDIATELY AVAILABLE, chamber filter press from Häcker with base frame and 50 m3/h Abel pump, plate format 1200 x 1200 mm, approx. 90 PP plates, 30 mm cake, content approx. 2700 liters, automatic. Plate transport, open outlet in filtrate trough on both sides, press is ready for use immediately after assembly, Abel pump was serviced by the manufacturer shortly before it was taken out of service, galvanized base frame with staircase, location is near Würzburg / Germany Bdsdsrunu Iopfx Addok

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, For optimum recovery of non-ferrous metals or purification of materials Bdedpfovdqdiex Addsk This extremely powerful machine is mainly used for processing household waste, shredder materials, household appliances, wood, plastic, glass, IBA and bed ash and electronic scrap. This IMRO non-ferrous metal separator stands up to the demands of very high recovery quotas and high purity levels.

Condition: good (used), Used radial drill SASS Mod.TRM 2200 Excellent condition, fully functional. Cube supplied Maximum diameter drilling from solid cast iron 20-22 100 mm Maximum diameter drilling from solid steel R=60 80 mm Bjdpfxsikqz Se Addedk Sliding quill spindle diameter 102 mm Spindle morse taper 6 Spindle vertical travel 500 mm Rotational speed 32 Spindle speed values with 50 Hz motor - rpm/1' 18 ÷ 1600 Automatic feeds Maximum reach from column edge to spindle axis 2230 mm Minimum and maximum drilling radius 660 ÷2505 mm Head displacement on arm 1845 mm Vertical arm displacement 1040 mm Column diameter 550 mm Column height with motor 3720 mm Base plate height 260 mm Base plate height 2490 x 1230 mm Spindle motor 11 HP Weight 9000 kg

Condition: used, Year of construction: 1991, VECOPLAN VAZ 120/105-U Waste Crusher For shredding particleboard and solid wood waste, drive power 18.5 kW, throughput 1000 kg/h for chipboard waste, 350 kg/h Bodpfx Adet Dh T Dededk for solid wood waste, screen diameter 25 mm, rotor diameter 235 mm (circle), width 1070 mm, 120 rpm, feed unit : Sectional steel construction , driven by hydraulic cylinders, in plastic guide rails, laterally with rollers, main drive E-motor with turbo coupling, V-belt drive, 2-stage helical gearbox, motor rated power 18.5 kW, rated current 36.5 A, 1455 rpm, 400 V, 50 Hz, Degree of protection IP 54, Type B 3, V-belt pulley Turbo clutch D 1 = 200 mm, V-belt pulley Drive D 2 = 200 mm, Number of V-belts Z = 3 pieces, V-belt Effective length LW = 1900 mm, centre distance ENOM = 635.84 mm, Door length L = 635.84 mm, impression depth EA = 23.35 mm, test force per V-belt F = 75?, Turbo coupling: hydrodynamic coupling, load-free starting of the electric motor, overload protection, hydraulic ic unit: Compact unit with 2 operating speeds, drive power 1.0 / 1.4 kW, drive pressure max. up to 180 bar, extraction nozzle: minimum air velocity V = 28 m/s, inlet length 1200 mm, inlet width 1050 mm, waste shredder with universal rotor- dimensions in mm: approx. 6500 x 2700 x 3600, weight in kg: approx. 2300, Machine quality: fully operational after maintenance. year of construction: 1991

Condition: good (used), Year of construction: 1994, functionality: fully functional, power: 75 kW (101.97 HP), Low-speed rotor with push floor Rotor width 2500 mm Bdsdpfx Adjtgqlyedek Rotor diameter approx. 400 mm Motor 75 kw Discharge via conveyor belt with magnetic roller