Bolster plate

nicht ersichtlich

Condition: new, Cardan shaft balancing machine BVI-03-74 Dcjdepbv Tfepfx Addjr Available in stock in Poland !!! Delivery time: one day!!! . . Machine for driveshafts weighing up to 150kg and up to 4700mm long. Suitable for small workshops with a large range of different shafts, including trucks. This balancing machine has high productivity and serves to balance the cardan shafts of cars and trucks. It makes the process of balancing the cardan shaft easy thanks to many technical solutions, while the machine has an affordable price, which reduces your financial burden and allows you to develop your business effectively. . . TWO TIMES faster than your machine. This balancing machine is majored to balance the shaft not only qualitatively, but also quickly. If you can balance in 2-2.5 times faster, then this is your real competitive advantage. . . HIGH PERFORMANCE ACCESSORIES The machine is equipped with three main types of adapters: 1. Fast clamping universal adapters. It has two main advantages: The first is that due to the special design the driveshaft flange is clamped within 5 seconds. This advantage is due to the fact that the driveshaft flange does not need to be fixed with bolts. THE SHAFT CAN BE CLAMPED 4 TIMES FASTER WITHOUT BOLTS. The second advantage is the centering rings. The driveshaft is mounted in the adapters with centering rings that can be made on an ordinary lathe to fit most common driveshafts. 2. KV Flange adapters. Used for balancing shafts with cross-tooth flanges. Applies to four flange sizes: 120, 150, 180, 205 mm. Usually used on truck driveshafts. 3. Adapter with slots. Used to mount various flanges with holes. Mounting the driveshaft is the same as on universal adapters, with the help of centering rings. KEY FEATURES • Balancing of 2, 3 and 4-support cardan shafts • Shaft length up to 4700mm, weight up to 150kg • Cardan installation in 1 minute • Standard set of adapters - Installation of 80% of cardan shafts; • Three ways of fixing the center bearing • Soft-bearing type machine - high sensitivity to any vibration • Machine is operated by one worker • Sliding bearing supports - quick changeover, comfortable operation • Safety bracket with clamp for quick installation • Measurement in all planes at one time • Calibration of the machine by the operator • Displays imbalance in real time • Create and print reports SPECIFICATIONS Maximum cardan shaft weight 150 kg Maximum flange diameter 300 mm Maximum length of cardan shaft 4700 mm Number of machine supports 4 Number of simultaneously measured planes 2, 3, 4 Minimum achievable residual specific imbalance, 10 g mm/kg Rotor speed range 1000-2000 rpm Power supply 380V, 3 Ph, 50Hz Power, minimum, 2,2 kW Dimensions (length x width x height) 6000 х 1100 х 1450 mm Weight 700 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer!

Condition: used, Year of construction: 1996, spindle diameter 60 mm x-travel max. 1000 - min. 100 mm y-travel max. 1000 - min. 100 mm bore capacity in steel max. 40 mm thread capacity max. M24 Thickness max. 60 - min. 5 mm spindle turning speed - stepless einstellbar 1 - 1.000 U/min feed stepless einstellbar, Eilgang 1 - mm/min feed stepless einstellbar, Arbeitsgang mm/min feed power 16 KN tool taper SK 40 spindle stroke 600 mm positioning speed in allen Achsen 1 - 10.00 mm/min positioning accuracy auf 300 mm = +/- 0,01 mm table load max. 500 kg work height max. 1000 mm weight of the machine ca. 4,8 t dimensions of the machine ca. 3,5 x 3,3 x 3,1 m Control Bosch CNC plate drilling system HMB PBM1000/60 - W12 for drilling head plates and Base plates in steel construction with tool changer (12x) Number of drilling spindles: 1 pc. Operating Voltage: 220/380V Frequency: 50 Hz Total connection value: 22 kVA Djdpsgvkkzjfx Addscr

Condition: good (used), Year of construction: 2010, LZ-Lathe Fabr.JET Type :GHB-1330 Bj.2010 with 3 ash digital indicator, 3 jaws lathe chuck DM 160 mm tool holder Multifix size A, 2 steady rests coolant device. Turning diameter overbed: 330 mm Turning diameter over face: 197 mm Center width: 750 mm Dcedpfx Adsqwgzqsdjr Spindle speeds: 70-2000 rpm spindle bore : 38 mm Machine in good condition from the training workshop Machine documentation available .

Condition: as good as new (ex-display), A demonstration metal band saw machine with base, quick clamping device and coolant device. Dcedpepgmkyjfx Adder Cutting range round/ rectangle/ flat 90° 220/ 220x220/ 250x155mm round/ rectangle/ flat 45° 160/ 160x160/ 160x100mm round/ rectangle/ flat 30° 100/ 100x100/ 100x85mm Cutting speed 32/ 66m/min Further Tech. Data see pdf. Document Tech. Date and dimensions: Errors excepted.

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width max. 245 x 150 mm voltage 230 V power capacity 1,5 kW dimensions of saw-band 2480 x 27 x 0,9 mm mitter cutting 0 - 60 ° cutting speed 20 - 90 m/min weight of the machine ca. 185 kg Dcedpfxjnlbmzs Addor dimensions of the machine ca. 1,4 x 0,69 x 1,7 m - stepless speed - stepless feed - miter cut - Bi-metal saw band - Material stop - Machine base - Coolant device

Condition: repair required (used), Machine number: 1464 TyP / Model: FUW 250/IV travel x-y-z: 400 - 220 - 400 mm table: 630 x 350 mm table clamping surface: 700 x 300 mm Dodpfxjd Hl Sto Addscr speed range: 45 to 2.240 rpm spindle mounting: SK 40 feed range longitudinal: 6,3 to 1.250 mm/min feed range cross: 6,3 to 1.250 mm/min Connection: 7.4 kW accessories/equipment: vertical head Condition: 2 controllers defective Note: machine repair EUR 2.000 weight: 1,45 t dimensions: 1.500 x 1.600 x 1.800 mm

Condition: used, Year of construction: 1970, x-travel:900 mm Djdpfx Aocxxqrjddscr y-travel:250 mm z-travel:370 mm table surface area:1525 x 325 mm total power requirement:9,85 kW weight of the machine ca.:3.1 t dimensions of the machine ca.:2,0 x 2,5 x 1,7 m

Condition: good (used), Drilling machine IMATEC AV-32 Drilling capacity in steel ST 60: 32 mm Spindle taper: MK 3 Spindle stroke: 150 mm Infinitely variable spindle speeds: 80 – 1170 rpm Feed Arm reach: 290 mm Maximum distance table – spindle: 780 mm Table with 2 T-slots: 480 x 400 mm Height adjustable via rack and pinion with hand crank Drive: 400 V / 0.9 / 1.3 kW Dsdpfx Adev A S Rhjdscr Required space approx. W 600 x H 2100 x D 900 mm Weight approx. 420 kg

Condition: used, Year of construction: 2007, turning speeds 2800 U/min drill diameter 2 - 40 mm drilling length 200 mm Dcedpfx Ajvdxz Asddor lip angle 40 - 180 ° total power requirement 0,76 kW weight of the machine ca. 170 kg dimensions of the machine ca. 850 x 850 x 1200 mm Equipment: - Chuck - Coolant device - Machine light - Operating instructions

Condition: new, The HB 250 A is a compact Horizontal Mitre Cutting Bandsaw, designed by KNUTH to efficiently handle a variety of cutting tasks in any workshop. This robust machine features a cast-iron, one-piece saw frame that is ideal for making precise miter cuts. With the operator moving the saw frame instead of the material, it enhances both convenience and accuracy. The hydraulic cylinder allows for infinitely variable support pressure and smooth sawing with optimized cutting through two speeds. The quick-action clamping vise ensures swift setup and secure material handling, making your operations seamless. Equipped with a coolant system, base, one saw blade, and comprehensive operator instructions, the HB 250 A ensures reliable performance in the Industrial Saw category. If you are looking for a reliable and powerful tool, you can request a quote for this Horizontal Mitre Cutting Bandsaw today. Dcedeu Abugopfx Addor