Self-propelled work platform

Niftylift HR21D Diesel ALLRAD 21m

Condition: new, turning diameter over bed 410 mm turning diameter over slide rest 240 mm turning length 1000 mm Iodpfxem Rlb Ne Adwoht turning diameter in the gap 530 mm turning speeds 65 - 1810 U/min centre height 205 mm spindle bore 52 mm tailstock quill taper MT 4 total power requirement 2,2 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 0,8 x 1,3 m Center lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions.

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 82 mm Distance between Center 2000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Ihsdpfx Asd I A Aujdwot Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Pinolenweg 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,950.00 kg Dimensions 3132 x 975 x 1270 mm

Year of construction: 1967, condition: good (used), machine/vehicle number: 7011/C, table mounting size: 310 x 1400 mm table movement x: 950 mm table movement y: 325/345 mm table movement z: ca. 500 mm spindle turning speed range: 20 - 1500 rpm carriages longitudinal and cross: 18 - 620 mm/min carriages vertical: 18 - 620 mm/min electrical connection: 380 V kW space needed: 1900 x 1600 x 1750 mm Ijdpfxed Rxw Hj Adweht weight: ca. 1500 kg

Condition: new, Year of construction: 2025, TECHNICAL SPECIFICATIONS height of center 330 mm distance between centers Ihodpsdzzw Uefx Adwet Spindle bore 103 mm Swing over bed 660 mm Swing in the gap 840 mm Swing over Slider 420 Speed range 36 - 1600 rpm (12 steps) Spindle nose ISO 702 / II No. 8 Range of longitudinal feeds 0.063 - 2.52 mm / rev (65 steps) Range of feed rates 0.027 - 1.07 mm / rev (65 steps) Metric threads 1 - 14 mm (22 steps) Inch thread 28 - 2 speed / inch (25 steps) Module thread 0.5 - 7 mm (18 steps) Diametrical thread 56 - 4 DP (24 steps) Quill diameter 75 mm Pinolenweg 150 mm Quill holder Morse cone 5 Motor power 11 kW Weight 3.050,00 kg Dimensions 3135 x 1050 x 1450 mm

Condition: used, turning diameter over bed / mm turning diameter over slide rest / mm turning length / mm total power requirement / kW weight of the machine ca. / t Ihodpfx Aov Rgzwsdwot required space / m Conventional lathe with copying attachment and extensive accessories Turning diameter over cross slide: 240 mm Spindle bore: 52 mm Turning diameter: 360 mm Center height: 180 mm Turning length: 1,000 mm Overall length: 2,200 mm Overall width: 750 mm Overall height: 1,400 mm Maximum spindle speed: 1,750 rpm Min. spindle speed: 60 rpm Total weight: 1,800 kg All technical specifications are subject to change without notice. Deviations may occur depending on the year of manufacture, model, or condition of the machine. We assume no liability for the accuracy or completeness of this information.

Condition: used, Year of construction: 1998, capacity 90 degrees: round 250 mm capacity 90 degrees: square 240 mm saw band length 2965 x 27 x 0,9 mm Isdpju Sbpvofx Adwsht table height mm band speed 37 / 76 m/min total power requirement 1,0 kW weight of the machine ca. 0,38 t dimensions of the machine ca. 1,0 x 1,6 x 1,4 m double miter band saw

Condition: used, pressure 75 t stroke 250 mm daylight longitudinal/sideways 800 x 215 mm dayligth 170 - 885 mm working pressure 7,5 - 8.5 bar weight of the machine ca. 0,45 t dimensions 1,2 x 0,8 x 2,1 mm Hydraulic/pneumatic workshop press Cylinder can be moved sideways pneumatic foot pedal Winch for table height adjustment 2 pcs. pressing blocks CE marking Ihedpfsupxr Usx Adwet

Condition: used, Year of construction: 2006, operating hours: 14,754 h, Equipment: all wheel drive, Atlas Terex 1905 Ihodpfx Adstplq Iowet Year of construction: 2006 Engine power: 114 KW hammer piping, air conditioning, quick coupler

Year of construction: 1990, condition: good (used), Various collets and holders Approx.300 pieces. For DECKEL milling machines FP1 -FP2-FP3-FP4 Single sale demand inquiries. Ihjdjhvz Iijpfx Adwet

Condition: good (used), Year of construction: 1999, machine/vehicle number: 108401 23-D, Offer 25318 Isdpjxta N Aefx Adwoht Technical Data: - Manual bandsaw machine - Bandsaw blade dimensions: 2375 x 20 x 0.9 mm - 2 cutting speeds: 33 / 66 rpm - Max. clamping capacity: 205 mm - Mitre adjustable left & right: 30° - Cutting range: - 90°: round 160 mm - square 160 mm - flat 200 x 100 mm - 45° left & right: round 140 mm - flat 140 x 60 mm - Drive: 400 V / 1.5 / 1.8 kW - Coolant system - Discharge roller conveyor with stop: 3000 mm - Infeed roller conveyor: 1500 mm - Weight: approx. 350 kg - Space requirement: approx. W 1100 x H 1700 x D 1550 mm