Glue application machine

OSAMA S2R-1300 + TDM

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, This degreasing system operates under vacuum (pressure swing process) with modified alcohol or hydrocarbon. (New system) 12-month warranty Immediately available from St. Gallen With vacuum pressure swing process System process: spray, immersion, ultrasonic, and steam degreasing including vacuum drying. Specifications: Ultrasonic 2*1000 W - 25 kHz Double fine filter Chamber door in bulletproof glass 2-tank system, capacity 400L Itedpfx Asqy H H Dsbcjd Double distillation and residual distillation Automatic oil discharge 3-stage water separation Electropolished chamber for ultra-fine cleaning Screw vacuum pump (latest generation) Loading trolley 2 wash baskets, mesh size 7mm and 12mm 12" touch panel Prepared for automatic loading Maximum basket size (480 x 320 x 200 mm) Maximum load weight 100 kg System dimensions 2400 x 2400 x 3300 mm System weight (basic version) 2500 kg Color RAL 9003 (white) RAL 7021 (black)

Year of construction: 1994, condition: good (used), Rivo gang wheel sharpening machine Itsdpjpl D Hxsfx Abcjd Tyop GA 250

Condition: used, Year of construction: 2021, Lindner Urraco 95 DK – Year of Manufacture 2021 – Well-Maintained Condition For sale is a Lindner Urraco 95 DK from 2021 with 7,230 recorded operating hours. The shredder is in a well-maintained and ready-to-use condition. The exact condition can be seen in the photos. The machine is equipped with the DK4 package, featuring a reinforced gearbox and a reinforced cutting frame. — Specification / Scope of Delivery • 1 set of armoured shafts HW 8/10 with clearing combs and breaker bar, suitable for scrap and waste • 1 set of used shafts HW 8/10 with clearing combs and breaker bar, also for scrap and waste • DK4 package with reinforced gearbox and reinforced cutting frame — Technical Data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Operating hours: 7,230 Engine power: approx. 566 kW (approx. 770 HP) Emissions standard: Stage V / Tier 4f (depending on version) Shaft length: approx. 2,500 mm Shaft diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Chassis: crawler tracks, hydraulically driven Application areas: scrap, commercial waste, bulky waste, mixed waste, wood, recycling material — Condition: Well-maintained machine Fully operational Sale as inspected on site Additional Information / Maintenance History The machine had a full maintenance and service contract directly with Lindner until recently. All maintenance and service work was carried out professionally in accordance with the manufacturer’s specifications and documented. Notes: • Sale is without any warranty or guarantee. • No return or renegotiation. • Subject to prior sale. Itsdpfx Absx Nkhqocjd All information provided is without obligation. The seller accepts no liability for possible errors, omissions, or changes in the details. Sale is exclusively subject to prior sale.

Condition: new, Year of construction: 2024, MONOBLADE EDGER lenht of cut from 4,2 to 8,2 mt max depth of cut 160 mm parallel guide Ijdpfofw Nv Rex Abcetd hopper

Condition: used, machine/vehicle number: 007517, Type of edging: Thin edge, Thick edge, Solid wood Itedpewuz E Rsfx Abced Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: new, Year of construction: 2026, Engine power 5HP Blade diameter 250mm Blade revolutions per (min) 5300 Automatic pneumatic movable table Galvanized iron and polyzene supports √ Maximum horizontal cutting length 4200mm Maximum vertical cutting height 2200mm Maximum horizontal cutting height 2080mm Maximum cutting depth 60mm Ijdou Rqq Hepfx Abcetd

Year of construction: 2013, condition: ready for operation (used), Connected load: 4kW, weight: 1t. Ijdpfxohlp Efj Abcjtd

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: GG520A-19388, total width: 5,272 mm, total length: 12,500 mm, total height: 1,500 mm, overall weight: 5,300 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, Bottero 520LAMe-37: Automatic machine for cutting, breaking and separating laminated glass. SN GG520A-19388 from 2011. Automatic positioning based on optimisation, automatic blade, 2 independent heating element sections, 20mm trimming, laser device for positioning diagonal cuts. Max cut 3700mm, max speed 100m/min, min 2/2 and max 8/8mm. Included: New felt (5mm) on the unloading table, the 520 LAMe-37 has also been serviced. Itodpfjxg Nxysx Abced

Condition: refurbished (used), Year of construction: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Saw blade max. carbide: 500 mm Drive power saw motor: 4 KW Saw motor speed: 2800 min-1 Cutting speed saw blade 500 mm: 4400 m/min Saw height control: infinitely variable, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat: 90° max.: 190 x 130 mm Working range round: 90° max.:150 mm Pneumatic feed length: 5-560, 10-1120 mm Compressed air connection, on site 6 bar Weight(saw)approx.: 800 kg Dimensions LxWxH (saw)approx.:2900mm x 1400mm x 1500mm Installation area LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4KW Retrofit Elumatec SA 142 4KW Retrofit Fully automatic sawing machine for non-ferrous metal and plastic After completion of the retrofit, the machine is in mint condition, both technically and visually. The machine will be overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI control panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Maintenance of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab Itedpfx Abjuiy Nyjced Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Extension of the sawing area to flat 90° max.: 300 x 120 mm - Splitting extension (for a high-quality cut surface without return marks) - Servo-controlled material feed - Saw blade feed Servo-controlled - Mass clamping device Feed vice - Delivery and installation on your premises - Training of your employees

Year of construction: 2004, condition: ready for operation (used), Max. working width: 1000mm, feed rate: 5-20m/min, height: 2200mm, length: 4000mm, weight: 3.3t, with documentation, was maintained regularly. Iodpfx Asi E Trpobcjtd