Band saws

Pehaka HS-820/820

Year of construction: 2009, condition: good (used), Load capacity: 30 t Hodpfx Adeqiz N Ro Ujfd Fine lift Lifting height 9 meters

Condition: used, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized Motor power: approx. 30 kW Power supply: 400 Volts, 50 Hz - Backgauge with ELGO positioning control - Backgauge adjustment via ball screws - SICK safety light curtain at the front as reach-in protection - 3 material support arms with ball transfers - Electric foot switch - Spare blade - Oil cooler with air heat exchanger - Very robust machine with extremely solid construction Machine footprint (L x W x H): 4650 x 2610 x 3200 mm Machine weight: 27,000 kg Transport dimensions (base machine) (L x W x H): 4650 x 2610 x 3200 mm Transport dimensions (additional) (L x W x H): 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Hfedpfjd Hxx Aox Ad Ued Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau, test cuts possible. Currently, the hold-down devices are being resealed; the resulting price adjustment will be made in the coming days.

Condition: used, Year of construction: 1998, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, rotational speed (max.): 12,000 rpm, overall weight: 7,500 kg, For sale: CNC 5-Axis Machining Centre, manufacturer DMG, model DMU 60 P The machine is fully operational and ready for immediate use. In 2021, a new spindle was installed, and all required maintenance has been carried out. History: 2019: New ball screw (KGT) 2021: New spindle 2022: Single-shift operation 2023: Occasional job orders 2024: Taken out of operation but remained connected to power 12/2025: Dismantled, cleaned, and stored Technical Specifications: X travel: 600 mm y travel: 650 mm z travel: 550 mm Control unit: Heidenhain TNC 426 Spindle speed: max. 12,000 rpm Spindle drive power: 15 kW Max. torque: 130 Nm Tool holder: SK 40 Table diameter: 630 mm Max. table load: 500 kg Number of tool pockets: 60 positions Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 m/min Feed rate: 20 - 10,000 mm/min Total connected load: 44 kVA Space requirements: approx. 7.0 x 6.0 x 2.7 m Machine weight: approx. 7.5 t Please note: Vices or clamping fixtures are not included in this offer. Upon request, we can organise transport and loading, at an additional cost. Europe-wide service available. All prices are subject to VAT. Hfsdpfowbhq Hox Ad Uod Inspection is possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your manufacturing needs? Or are you looking to sell yours? For more information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, cutting height (max.): 400 mm, cutting width (max.): 400 mm, total height: 1,720 mm, total length: 2,600 mm, total width: 2,400 mm, overall weight: 2,200 kg, table height: 700 mm, cutting range round steel at 90°: 400 mm, feed length X-axis: 600 mm, saw band length: 5,700 mm, saw band width: 41 mm, Fully hydraulic high-performance bandsawing machine in heavy-duty construction, with a horizontally parallel traversing saw blade, designed for cutting profiles, pipes, and solid materials of all grades, including extremely tough-to-machine materials (e.g., titanium, Inconel, Hastelloy). Suitable for use with bi-metal and carbide-tipped saw bands. The saw unit is constructed in a fully solid design from polymer concrete, providing maximum running smoothness and service life for the saw blades. Guidance of the sawing unit is via two vertical square columns (double-column guide) with hardened and ground guide rails. Mechanical saw band tensioning with preloaded carbide saw band guides. Material clamping is performed by two horizontal frame clamping vises. Material feed is via a non-driven roller conveyor integrated into the machine with twelve transport rollers, enabling easy transport of short offcuts. Year of manufacture: 2008 Cutting range round: 400 mm Cutting range square: 400x400 mm Material feed (automatic): 600 mm Multiple material feed: 99,999 mm Cutting speed (infinitely variable): 20–130 m/min Total drive power: 7 kW Saw motor drive power: 4 kW Clamping pressure reduction: infinitely adjustable Material support height: 700 mm Saw band dimensions: 5,090 x 41 x 1.3 mm Minimum cut length in automatic mode: 6 mm Remaining piece length in automatic mode: 80 mm Voltage: 380V/50 Hz Dimensions (LxWxH): 2,600 x 2,400 x 1,720 mm Weight: 2,200 kg Hfedjupvrxopfx Ad Ujd Equipment: • Coolant system • Full enclosure • CNC control • Standstill monitoring • Side guide rollers • Height measurement system • Light barrier

Condition: used, machine/vehicle number: 4/14242, Frank Floor Sanding Machine FSR used Engine power: 0,75 KW Voltage: 230 Volt 5 amps, 50 Hz, Machine no.: 4/14242 Hjdpfxeb Auu Rj Ad Usfd Dust bag Location: Ex warehouse Bitburg

Condition: used, MOSTANA STANKO 1M65-5 HEAVY DUTY CENTRE LATHE MAKE MOSTANA STANKO, MADE IN USSR MODEL 1M65-5 YEAR MID 80s SWING OVER BED 1000.0 mm SWING OVER SADDLE 650.0 mm CHUCK SIZE 1000.0 mm SPINDLE BORE 135.0 mm SPINDLE SPEEDS 5- 500 RPM SPINDLE POWER 22 Kw PLUS POWER FEED TO THE SADDLE METRIS AND ENGLISH SCREW CUTTING 1000.0MM 4 JAW CHUCK 2 AXIS DIGITAL READOUT Hsdpex Dmi Dsfx Ad Uofd CLEAN BED WORKED ON COMPOSITE, NO METAL

Condition: used, Year of construction: 2003, pressing force: 260 t, Hydraulic press brake Manufacturer: HACO Type: ERMS 60-260 Year of manufacture: 2003 Technical specifications Manufacturer: HACO Type: ERMS 60-260 Year of manufacture: 2003 Pressure capacity: 260 t Bending length: 6000 mm Dimensions (L x W x H): approx. L 7.0 x W 2.0 x H 3.70 m Weight: approx. 31 t Equipment • ATS 560 digital control system • Fiessler light barrier at the front • Centrally adjustable crowning • Amada tool system • Controlled axes: Y1, Y2, X • Manual R-axis • 1 set of upper tools • 1 set of lower tools All information is subject to change. A demonstration is available at any time in the exhibition hall. Hsdpfx Aowkttrsd Ujfd

Year of construction: 1965, condition: used, pressure 150 t throat 550 mm stroke 10 - 140 mm table surface area 1180 x 980 mm no. of strokes 40 Hub/min dayligth 500 mm ram surface 1040 x 800 mm ram adjustment 70 - 150 mm tool shank hole (depth x diameter) 435 x 55 mm required power 15 kW Hjdpfx Aecubatsd Uefd weight of the machine ca. 12 t dimensions of the machine ca. 3 x 1,7 x 3 m - with additional brake - slide weight compensation - motorized slide adjustment - central grease lubrication (manual) - table mounting plate - safe for manual inlay work

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 1,10,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Hfodpfsyahv Sex Ad Uod Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: used, Year of construction: 1996, center height in crank: 1,100 mm, workpiece weight (max.): 80,000 kg, grinding length: 14,000 mm, grinding wheel diameter: 915 mm, grinding diameter: 2,000 mm, quill stroke: 200 mm, quill diameter: 260 mm, workpiece weight between centers: 8,00,00,000 g, workpiece diameter between centers: 2,000 mm, workpiece length between centers: 14,000 mm, power: 35 kW (47.59 HP), High capacity cylinder grinder with hydrostatic guides POMINI mod. HD 402/425 - year 1996 - maximum diameter 2000mm - working length 14000mm - tip capacity 80000 kg. Possibility of complete retrofit of the machine's electrical unit, manageable updates or modifications for application change. Grinder disconnected and ready for collection. Hfjdpfjtxlyxsx Ad Ujd