Generator

Piller 1100 KVA Gensets

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: D91402707010001/2013, overall weight: 1,500 kg, Electric motor for sale For description, see nameplate and pictures Sale only within EU member states! Not a private sale The MAE is available for inspection. We accept no liability for any warranty claims. We assume no liability for the accuracy of the technical data and year of construction, for the completeness of accessories and tools, as well as for compliance with all safety and environmental requirements mentioned in the accident prevention regulations. Kdsdpowittpofx Anisu We assume no liability for the accuracy of the technical data and year of construction, for the completeness of accessories and tools, as well as for compliance with all safety and environmental requirements mentioned in the accident prevention regulations.

Condition: like new (used), Year of construction: 2026, power: 286 kW (388.85 HP), fuel type: diesel, rotational speed (min.): 1,900 rpm, Technical Data for Deutz Engine Type BF6M1015C General Specifications Number of Cylinders: 6 Bore/Stroke: 132 mm / 145 mm Displacement: 11.91 liters Compression Ratio: 16.5 Max. Rated Speed: 2100 rpm Mean Piston Speed: 10.15 m/s Power Ratings for Construction Equipment Engines Group I: Power: 300 kW Speed: 1900 rpm Mean Effective Pressure: 14.4 bar Group III: Kdodpfsyzaayox Anisu Power: 273 kW Speed: 1900 rpm Mean Effective Pressure: 13.1 bar Additional Parameters Max. Torque: 1980 Nm At Speed: 1200 rpm Minimum Idle Speed: 550 rpm Weight (to DIN 70020, Part 7A): 850 kg This summarized technical data provides a comprehensive overview of the BF6M1015C engine’s specifications and performance ratings.

Condition: new, functionality: fully functional, power: 480 kW (652.62 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 840 A, type of input current: three-phase, overall weight: 2,290 kg, protection type (IP code): IP55, New AC Siemens motor Kodpsw Tiu Nefx Anijdu Type: 1LE56033BB590AK5-Z Construction: IM1001-B3 Standard: IEC60034-1 Operating class: S9 Input voltage: 400/690 Input current: 2 x 640 Power Pn kW: 840/485 RPM: 1491 Power factor: 0.86 Frequency: 50Hz

Condition: ready for operation (used), Year of construction: 2015, Rated current: 2250A, rated impulse current: 75kA/125kA, degree of protection cabinet/floor: IP20/IP00, protection class: SK1, cable entry: bottom, main lines: 400V/230C AC, control lines: 110V DC, signal lines: 110V DC, number of panels: 7, panel equipment: panel 1: 4x NH00, panel 2: 2x NH1, panel 3: 2x NH2, panel 4: 2x NH3, panel 5-6: Siemens WLII 2000S+ETU25B, panel 7: Siemens BR6000 compensation. Documentation available. On-site inspection is possible. Kdsdpjuanrkjfx Anisu

Condition: used, Year of construction: 2002, Technical details: rated capacity: 1670 kVA rated capacity: 1500 KW voltage: 400 / 50 V / Hz Number of working hours: 800 h This UPS system is ideal for fault-free operation under the demanding environmental conditions that can occur in industrial applications. Suitable for stabilizing mains systems, for example. The UPS system consists of the Powerbridge (a flywheel mass with attached generator) and a Uniblock (electric motor/generator block). The Uniblock supplies the power for the customer modules without grid faults. The Powerbridge serves as energy storage. In the event of a mains failure, the Powerbridge briefly takes over the power supply (at full load, the power supply is maintained for 39 seconds). Energy storage unit type PB60+ with bridging time 39sec. A diesel engine is connected via an overrunning clutch. This means that as soon as the engine has reached the speed of the Unibklock, it pulls the generator up to the synchronous speed and thus takes over the power supply. At the same time, the Powerbridge is supplied with energy again. * Kdodju Nzwuepfx Aniou

Year of construction: 2011, operating hours: 20 h, condition: used, functionality: fully functional, machine/vehicle number: MY15339, Diesel generator set, consisting of an MTU diesel engine and a Marelli three-phase generator. Engine data: Manufacturer: MTU Friedrichshafen GmbH Model: 12V 2000 G65 Year of manufacture: 2011 Power output: 695 kW Speed: 1,500 rpm Design: 12-cylinder V-diesel engine Displacement: approx. 23.9 liters Weight: 2,450 kg Generator data: Kjdpfx Aszzxa Ajnisdu Manufacturer: Marelli Motori Type: MJB 400 LB4 B34 Serial number: MY15339 Rated apparent power: 1,150 kVA Voltage: 525 V Rated current: 1,265 A Frequency: 50 Hz Power factor: cos φ 0.8 Operating mode: S1 – continuous operation Protection class: IP23 Insulation class: H Weight: 2,750 kg 40 ft hc container

Condition: good (used), operating hours: 34,700 h, functionality: fully functional, fuel type: diesel, output frequency: 50 Hz, nominal power (apparent): 1,250 kVA, type of cooling: water, MTU diesel generator set including exhaust aftertreatment according to 44.BImSchV (from 1/2026, 100mg NOX, 6mg particulates, etc.). A complete overhaul was carried out at 21,000 operating hours for over 100,000 euros. All filters of the exhaust aftertreatment system were replaced in 2025. The exhaust aftertreatment unit can also be purchased separately. Kdedjy Nbt Ropfx Anieu

Condition: used, Year of construction: 2020, 1) Four-stroke engine Jenbacher J 612 GS-J03, operating hours: under 15,000h, ISO standard output: 2,058kW, design: V 60°, number of cylinders: 12, bore: 190mm, stroke: 220mm, displacement: 74.85l, input power: 4,474kW, mixture: 692kW, oil: 204kW, engine cooling water: 315kW, exhaust gas when cooled to 180°C: 638kW, exhaust gas when cooled to 100°C: 909kW, surface heat: 79kW, rated speed: 1,500/min, moment of inertia: 56.67kgm², direction of rotation (viewed from flywheel): left, radio interference suppression level acc. to VDE 0875: N, starter power: 13kW, starter voltage: 24V, mean piston speed: 11m/s, length: 4,246mm, width: 1,886mm, height: 2,503mm, engine dry weight: 9.5t, engine operating weight: 10.3t, 2) Generator Stamford LVSI 804 W, rated output: 2,643kVA, drive power: 2,058kW, rated active power cos φ=1: 2,004kW, rated active power cos φ=0.8: 1,986kW, rated apparent power cos φ=0.8: 2,483kVA, rated reactive power cos φ=0.8: 1,490kVA, rated current at cos φ=0.8: 3,584A, frequency: 50Hz, voltage: 400V, speed: 1,500/min, overspeed: 1,800/min, power factor (ind.-cap.): 0.8-0.95, efficiency cos φ=1: 97.4%, efficiency cos φ=0.8: 96.5%, moment of inertia: 117kgm², cable outlet: left, insulation class: H, temperature rise (at drive power): F, max. permissible ambient temperature: 40°C, weight: 6.752t, with documentation. An on-site inspection is possible. Kedpfxjzvgg Te Anijdu

Condition: new, functionality: fully functional, input voltage: 4,00,690 V, input frequency: 50 Hz, input current: 6,00,346 A, type of input current: three-phase, protection type (IP code): IP55, Siemens AC motor Type: 1LE56033BB390AK1-Z Kdodpjxg Itcefx Aniou Construction: IM1001-B3 Standard: IEC60034-1 Duty Class: S9 Input Voltage: 400/690 V Input Current: 600/346 A Power Pn kW: 340 kW RPM: 1492 Power factor: 0.86 Frequency: 50 Hz

Condition: ready for operation (used), functionality: fully functional, rotational speed (max.): 741 rpm, input voltage: 400 V, input frequency: 50 Hz, input current: 633 A, type of input current: three-phase, overall weight: 2,980 kg, Name: AC-LV squirrel-cage motor, efficiency-class 2 Manufacturer: EMZ Type: AKR 400-06-033 Rated output [kW]: 355 Duty type: S1 Rated speed [rpm]: 7410 Number of poles: 8 Direction of rotation: Both Rated voltage [V]: 400 Voltage fluctuations [+/- %]: 5 Connection: Delta Rated frequency [Hz]: 50 Frequency fluctuations [+/- %]: 2 Rated current [A]: 633 Locked rotor current [Ia/In]: 6.5 Type of construction: B3 Degree of protection: IP55 Cooling method: IC411 Frame material: Cast iron Insulation class: F Temperature-rise: B Efficiency [%]: 95.2 Efficiency 3/4,2/4,1/4 [%]: 95,4 / 92,4 Efficiency class: IE2 Power factor [cos phi]: 0.85 Power factor 3/4,2/4,1/4 [cos phi]: 0,83 / 0,74 Rated torque [Nm]: 3424 Locked rotor torque [Ma/Mn]: 1.4 Breakdown torque [Mk/Mn]: 2 Moment of inertia J [kgm˛]: 21,2 Ksdpszl Ddusfx Anijdu Number of starts [cold/warm]: 3/2 Ambient temperature: > -20°C < 40°C Altitude above sea level: < 1000m Bearing design: Antifriction bearing Bearing design [d-end/nd-end]: 6326-C3 / 6326-C3 Fixed bearing: Nd-end Regreasing device: Yes Type of shaft: Cylindrical Shaft-dimensions [mm]: 110 X 210 Shaft-height [mm]: 400 Position of terminal box: On top Cable entries: 7x M63x1,5 Winding protection: 2x 3PTC Bearing protection: 1x PT100/bearing Heating elements: 1x200W