Pinacho L1-225

Pinacho L1-225

Condition: used, functionality: fully functional, spindle bore: 52 mm, turning diameter: 450 mm, turning length: 1,600 mm, Pinacho lathe model L1 225 x 1600mm e.p, diameter admitted on bed 450mm, on neckline 690mm, on cross slide 215mm, quill hole 52mm, 18 speeds 32-1800rpm, 5.5hp motor, with steady rest, with quick change turret, with various accessories, lathe in good condition Cjdpfx Adev Rm Udjdohf

Condition: good (used), Heavy-duty lathe, turning machine, lathe, center lathe, center lathe -Manufacturer: Meuser, lead screw lathe type M-IV-S -Machine bed: hardened -Turning length: 3800 mm -Turning Ø over bed: 720 mm -Turning Ø over support: 440 mm -Spindle bore: Ø 95 mm -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 400 mm -Tailstock mount: MK6 -Drive: 18 kW -Accessories: 1x bezel, Multifix tool holder, tools see photos -Dimensions: 5930/1650/H1600 mm Chodpfx Ajwrfkfsddof -Weight: 7500 kg

Condition: good (used), Year of construction: 2012, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1500rpm spindle, 165mm bar capacity, 10 station turret 45kW spindle motor, FANUC control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant, Cjdpownfzcofx Addohf

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 500 mm turning diameter over support: 260 mm turning length: 950 mm center height measured in bed: 220 mm centre distance: 1000 mm revolution per minute: 11,2 - 2240 / 24 step U/min spindle bore of work spindle: 62 mm tailstock quill adjustment:: 210 mm longitudinal feeds:: 0,045 - 1,6 mm/U - 32 step cross feed: 0,02 - 0,71 mm/U - 32 step total power requirement: 11 kW weight of the machine ca.: k.A. t Cedov A Sqhepfx Addshf dimension machine xH: 3,3 x 1,2 x 1,6 m The machine is in a very good condition (very quiet spindle run) in Leipzig. Top slide rotatable 360° 3-jaw lathe chuck Ø 315mm with jaws (inside/outside) for speed 2000 rpm. Thread cutting: metric, modular thread, inch Chip protection wall Chuck protection (mechanical) MULTIFIX steel holder with Ø 40mm drill steel holder Chip collection tray Coolant supply with pump Protective device for lead screw Machine base UVV is pre-equipped ( UVV=Accident Prevention Regulations) *

Condition: new, Year of construction: 2024, Container turning device 10 tons lifting capacity Double drive Synkron Axle distance steplessly adjustable by means of thread Chsdpfx Ajifk Rbjddef speed infinitely variable with foot remote control diameter from 300mm to 3500mm Roll width and diameter 120 x 270mm Speed 200 - 1200 mm/min.

Condition: new, New lathe with large spindle bore. Brand : KMS Type : CS6250C TDC : 1000mm Turning diameter over bed : Ø 500 mm Turning diameter over slide : Ø 300 mm Turning diameter in bag : Ø 710 mm Chsdpfx Ashhm Edsddof Turning length in bag: 240 mm Bed width : 390 mm Spindle diameter : Ø 105 mm Spindle speeds : 12 (36 - 1600 rpm) Tailstock spindle diameter : 75 mm Tailstock range : 150 mm Tailstock recording : MC 5 Machine dimensions : ± 2630 x 975 x 1270 mm (L x W x H) Machine weight: ± 2100 kg Machine equipped with: - Longitudinal and transverse feed. - Rapid traverse on longitudinal and transverse feed. - Movable and adjustable stops for automatic longitudinal feed. - Thread cutting shaft (Metric/Inch/Module/DP thread cutting possible. - Multifix type quick change tool holder. - 2-axis digital readout (Brand: Sino). - 3-jaw chuck Ø 315 mm, bore 100 mm (Camlock). - 4-jaw chuck Ø 400, bore 105 mm (Camlock). - Drive plate Ø 630 mm (Camlock). - Steady rest Ø 120- Ø 260 mm. - Follow rest Ø 20 – Ø80 mm. - Coolant device.

Condition: excellent (used), Four-jaw chuck make Roto Record type DHK 315 x 4 short taper size 8 Chjdsg Rxh Iopfx Addsf taper diameter 139,735 bolt circle diameter 171,4 mm diameter 315 mm Jaws individually adjustable

Year of construction: 2022, condition: new, Technical data: - load capacity: 10.000 kg - Own weight: 850kg Chsdpfx Adjfxw H Asdjf - Insertable workpiece diameter: 50 - 3500 mm - Roll diameter: 250mm - Roll width 160mm - turning speed approx. 100-2.000 mm/min - Two-pedal foot switch - Potentiometer for infinitely variable speed control

Condition: good (used), Year of construction: 2002, machine/vehicle number: 120K587, Hello, For sale is a well-preserved Quaser MV204II universal CNC milling machine with HEIDENHAIN control at an unbeatable price-performance ratio The purchase price includes: tool changer, measuring probe, chip conveyor, coolant system, hydraulic system, documentation/machine documents, etc... Data machine dimensions Height: 2,825mm Width: 2,650mm Length: 2,200mm Weight: 7,500Kg Data travel paths Chjdjpfawhepfx Addjf X-axis travel: 1,020mm (feed speed 32,000mm/min) Y-axis travel: 600mm (feed speed 32,000mm/min) Z-axis travel: 560mm (feed speed 32,000mm/min) Milling table data Milling table size: 635 x 1,200mm Milling table loading capacity: 1,000Kg Table configuration: 6 x 18mm H 8 T-slots Milling spindle data Max. spindle speed: 7,500 / 10,300 1/min Max. spindle torque: 252Nm All further data available on request by email!!! Viewing appointment possible. Best regards

Condition: excellent (used), Precision lathe, turning machine, lathe, center lathe, center lathe -Manufacturer: WEILER, lead screw lathe type commodor 42 -Machine bed: hardened -Turning length: 900 mm -Turning Ø over bed: 400 -Turning Ø over support: 190 mm -Spindle bore: Ø 56 mm -Spindle speeds: 45 - 2000 rpm -Three-jaw chuck: Röhm Ø 200 mm -Four-jaw chuck: Röhm Ø 200 mm -Tailstock mount: MK3 -Drive: 4 kW Chodexapm Repfx Addsf -Accessories: 18x Multifix tool holder with rotating center see photos -Lathe dimensions: 2200/1300/H1410 mm -Weight of lathe: 1380 kg