Generator

Pramac GSW 510V

Condition: good (used), Year of construction: 1993, operating hours: 604 h, Generator is in good condition, located on stock. Codpfx Adjvkvvqsdork

Condition: good (used), Manufacturer ESTARTA Model 301 MV Condition Used Stock number 4576 Location Badajoz, Spain Dimensions 1520x1020x1260mm Weight 1550 kg Opening between grinding wheels 1,5/50mm Max. grinding wheel width in plunge grinding plunge 125mm Dimensions of the working wheel (od x id x width) 300x125x175mm Øext.min. working wheel working wheel 220mm Max. depth of profile of working profile depth 8mm Dimensions of the driving wheel (od x id x width) 220x125x125mm Øext.min. of driving wheel drive wheel 165mm Max. depth of profile of the driving wheel profile depth 8mm Grinding wheel motor power motor power 7,5Kw Motor power of grinding wheel driving motor power 0.75Kw Tilting angle angle of working working Cjdpfx Adjr Ezfpjdjrk +/- 5º

Condition: refurbished (used), CN Centerless grinding machine ROSSI MONZA 1500 CN currently being overhauled and fully electrically/electronically retrofitted Siemens electronics with touchscreen, brushless motor on Z (workpiece diameter) and regulating wheel (adjustable RPM), step motor on grinding wheel dressing increment, auto size compensation after grinding wheel dressing Grinding wheel 350 mm * 610 mm dia Crsdpfx Aemmqireddsk This machine can be inspected in our warehouse in Gussago BS Italy Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is given to them with the aid of a tool. The through-feed grinding or also through grinding and longitudinal grinding: pieces to be worked proceed uninterruptedly with axial feed through the rectification gap. Grinding wheel width: 350 Grinding wheel diameter: 600 CNC: Siemens

Condition: good (used), Consisting of : Csdoib H Ddspfx Adderk - 3 tanks of 18000 litres - 3 tanks of 15300 litres - With walkways - Material: AISI 316 - Square discharge door (bottom) - Motorised mash discharge - Round manhole DN 400 (cylindrical part) - Total emptying: ball valve Ø 40 Friedrich no 2 - Partial drain: ball valve Ø 40 Friedrich no 2 - Taster - Recirculation with ball valve Ø 40 Friedrich no 2 - Dome Ø 400 mm, eccentric - Central dome DN 400, with a cylinder-grid fixed inside (to keep the mash cake wet) Dimensions : - 3 tanks 18000 litres: Ø 2000 mm, height 5600 mm - 3 tanks 15300 litres: Ø 2000 mm, height 4800 mm - Ground clearance: approx. 550 mm

Condition: used, Grinding wheel dimensions (h x w x d x w) Ø 650 x Ø 304,8 x 500mm Ø min/max to be ground 3 / 200 mm Width of regulating wheel 500 mm No. of regulating wheel speeds Infinite Min/max. grinding wheel speed (r.p.m.) 10 / 255 r.p.m. Diamond dressing (auto/manual) Longitudinal auto,manual penetration both wheels Diamond dressing speed 255 r.p.m. No. of cnc axes 1 Grinding wheel dimensions (h x w x d x w) Ø 350 x Ø 203,2 x 500mm Grinding wheel width 500 mm Maximum length to grind in plunge 500 mm Grinding wheel head motor power 55 Kw Hydraulic motor power 3 Kw Total power 60 Kw Voltage 220/380V Length 2.300 mm Width 2.800 mm Height 2.100 mm Weight 15.000 Kg Csdjix N Enepfx Addjrk

Condition: used, Technical details: rated capacity: 16,5 kVA rated current: standby: 72 A Cjdeu Nu Utjpfx Addsrk type of fuel: Diesel tank capacity: 66 l rated voltage: 230 / 1 Phase V rated frequency: 50 Hz dimension machine xH: 1,7 x 0,9 x 1,3 m weight of the machine ca.: 0,72 t Engine: Perkins Diesel; type 404D-22G; 4 cylinders; speed 3000 rpm; water-cooled; battery 12 VDC-NEG Generator: 230V, 1 phase; 72 A; protection class IP 23; speed 1,500 rpm; excitation voltage 20.6V and excitation current 1.68A; insulation class H Ambient temperature: +25°C *

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 1,380 kg, fuel type: diesel, tank capacity: 150 l, color: white, output current: 217 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 55 kW (74.78 HP), continuous power: 50 kW (67.98 HP), total length: 2,450 mm, total width: 1,000 mm, total height: 1,400 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Deutz, Cummins, Ricardo, type of cooling: water, workpiece weight (max.): 1,380 kg, type of input current: three-phase, warranty duration: 36 months, Three-phase stationary generator Proton ZPP 50 (50kW - 55kW) in a compact housing resistant to precipitation and additionally soundproofed. The aggregate has an external automatic reserve switching system SZR (Autostart) and many other functions as specified later in the description. - Model - Proton ZPP 50 SZR - Maximum power - 55000 Watt (55kW / 70 kVA) - Rated power - 50000 watts (50kW / 63 kVA) - Prepared for operation - Yes - Type - Industrial genset - Condition of genset - Factory new - Manufacturer - Proton - Generator type - Three-phase - VAT invoice 23% - Year of production - 2024 - Warranty - 36 months ⊳ ENGINE: Engine model - Ricardo MNN4105ZLD Fuel type - Diesel (Diesel) Combustion: - 7.5 liters per hour (at 75% of maximum power) - 5.0 liters per hour (at 50% of maximum power) Engine configuration - In-line (R4) Displacement - 4800 cc3 Direct injection Lubrication method - Forced, engine with oil pump ⊳ ENGINE: 100% Copper AVR voltage stabilizer - Yes Generator model - Proton 224E Rated 400V power - 50000 watts (50kW / 63 kVA) Maximum power 400V (up to 15 minutes) - 55000 Watt (55kW / 70 kVA) Rated current (400V) - 217.0 A Current protection - C16, C32, main - 100A Frequency - 50 Hz Generator construction - Synchronous ⊳ ENCLOSURE: Silenced enclosure Precipitation resistant housing Three-phase and single-phase sockets Fuel tank capacity - 150 liters Operating time on full tank (Average) - 20 hours Transport kit - Holes for forks and HDS transport hooks Credpfx Aotpxhmjddsk Dimensions 245 x 100 x 140 cm Gross weight - 1380 kg ⊳ FEATURES: Voltage stabilizer (AVR) - Stamford SX460 (2%) - electronic voltage stabilization with variable load - electronic frequency stabilization Automatic operation of the genset SZR (Self-actuated reserve switching) Thermal overload protection Sensor for oil pressure, oil level, coolant level Glow plugs Oil sump heating Heating of the cooling liquid Battery - 2 pieces 60Ah Automatic charger ⊳ CONTROLLER: Controller model - Comap InteliLite 4 AMF 20 Hour meter Ammeter Voltmeter Built-in PLC logic and PLC editor Overload protection CAN module extensions Integration with SCADA system Additional outputs - for 4G, Ethernet, RS232/485 connections GPRS remote control and monitoring - Optional Modbus, Ethernet communication - Optional Why us? We are a company specializing exclusively in generators, for more than 17 years we have been operating in this industry constantly striving to make sure that our products represent the highest quality and are as reliable as possible. During this time we have provided solutions to more than 10,000 customers in Poland even in its remotest corners. We select suppliers of components for our units meticulously, making sure that they are leaders in their industries. We have a wide range of gensets from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Condition: good (used), - Capacity : 2 x 4000 l/h - Inlet temperature : + 40°C - Outlet temperature: + 20°C - Cooling liquid temperature: approx. 7°C - 2 plate compartments for cooling 2 products simultaneously and individually - With control for 2 independent circuits Crjdpfx Adeh Ath Rodsk

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open compact Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt, Spraying unit (Anti-sticking liquid) Automatic and accurate Panels in-feed system Mod. A1 / 15 In-feed fence, adjustable by N.C. Panels in-feed system Bar Code Reader Pre-milling Unit (vertical joint trimmers) by N.C. 08.379 (2 x Kw 4,0) Crjdpfx Aoltmnleddsk Lamps to heat the workpieces side Glueing Unit (P.U.R. Glue + Quick Melt system) VTG + 283.203 Band Pressure zone. Height adjustment of the band by N.C. Edge coils supporting unit (reels N°) 12 Snipping (end-cutting) unit 08.42 / 30 / B (Kw 0,66 x 2) (PNEU 0°-25°) 30m / min Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 0,66 x 2) 4 PROFILES HSK 25 Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (Kw 0,5 x 1) 30m/min Profile edge scraping unit (Multi-profile, by N.C.) 08.516 (4 PROFILES) Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617 (Kw 0,25 x 4). Free space Milling grooving unit 08.190 (Kw 4,5 x 1)

Condition: used, Technical data: Max saw diameter: 600 mm Min saw diameter: 590 mm Saw spindle diameter: 30 mm Pneumatic saw feed Max cutting height: 210 mm Max saw blade advance width: 500 mm 2 pneumatic clamps Extraction spigot diameter: 155 mm Work table dimension: 790x910 mm Power supply: 400 V Crjdpfxeri Si Do Addsk Motor power: 11 kW Overall dimensions: Length: 1550 mm Width: 1550 mm Height: 2000 mm