Center Hole Grinding Machine

Technica 14-M-110 Center Hole Grinding Machine

Condition: used, Year of construction: 1994, The emergency power generator was rarely used; it was connected to the heating system, which is why it does not have a water cooler. There are a total of 2 units available; the price is for 1 unit. Gjdpfoxdc Ehox Ad Ustw

Condition: used, length:1800 mm width:1200 mm Gsdpfscxxu Dsx Ad Uotw weight of the machine ca.:1,6 t dimensions of the machine ca.:1,8 x 1,2 x 0,4 m

Condition: new, Year of construction: 2025, The XTON Smart Cleaner SC1000™ automatic basket washer is constructed from stainless steel AISI 304 and acid-resistant steel AISI 316. It is designed for use in various industrial and automotive applications. This washer is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned element. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner BA, which, combined with the appropriate temperature and pressure, easily removes all types of dirt. The machine operates in a closed-loop system at temperatures up to 80°C. Standard equipment includes a rotating basket with a diameter of 100 cm and a 300-liter tank, which can be optionally thermally insulated to protect the heated fluid from cooling too quickly. The Smart Cleaner SC1000™ ensures high cleaning quality, time and energy savings, as well as safe and convenient operation. It is designed for automatically removing dirt from cast iron, aluminum, and steel surfaces. The design and construction of the Smart Cleaner SC1000™ adhere to the highest quality standards ISO 9001 and environmental standards ISO 14001. EQUIPMENT: - Rotating basket with a diameter of 100 cm - Heated tank with a capacity of 300 liters - Dual liquid filtration system - Liquid level and temperature sensors - Oil separator - Adjustable feet with a height adjustment range of 100 mm - XTON Active Cleaner BA (5L starter pack) TECHNICAL PARAMETERS: - Weight: 200 kg - External dimensions - Open chamber (W x D x H): 150 x 120 x 250 cm - External dimensions - Closed chamber (W x D x H): 150 x 120 x 140 cm - Rotating basket diameter: 100 cm - Rotating basket load capacity: 300 kg - Work time programming range: 0 - 99 min - Washing/liquid temperature: up to 80°C - Heater power: 9 kW Godpfx Aju R Urhsd Ustw - Tank capacity: 300 L - Tank capacity to oil separator level: 200 L - Pump capacity: 250 L/min - Spray pressure: 4.5 - 6 bar - Power supply: 3 x 400 V - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 - Declaration of conformity: CE

Condition: used, Year of construction: 2004, max. working diameter 610 mm max. working lenght 1.522 mm travel -x axis 740 mm travel -y axis 410 mm travel -z axis 1.838 mm control MAZATROL Fusion 640M Pro b-axis 240 ° c-axis 360 ° Godpfx Adsx Avr Ss Uetw number of spindle speeds 4.000 U/min spindle bore 88 mm milling spindle turning speed range 12.000 U/min numbers of positions in the tool changer 80 CNC Turning- and Milling Center | MAZAK - INTEGREX E-410H The machine is in a well-maintained condition. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: INTEGREXE41H | INTEGREX 410H | INTEGREX-E410 H

Condition: used, Year of construction: 2003, Turning length 1000 mm Spindle bore 65 mm Gedpfxsx N A I No Ad Ustw Max. turning dia. 300 mm Spindle speeds 4000 rpm Spindle speeds on live tools 4000 rpm Turret w/12 stations Control: Mazatrol 640 T Nexus Equipped with: 3 pcs. live tools Various tool holders

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 1,200 mm, Mazak Quick Turn Nexus 350M CNC turning center with Mazatrol 640T Nexus CNC control Year of manufacture: 2004.11 Turning length: 1,200 mm Max. swing diameter: 750 mm Standard machining diameter: 336 mm Max. machining diameter: 420 mm Bar capacity: 102 mm Maximum spindle speed: 4,000 rpm Gedjx Dccyopfx Ad Ujtw 12-position tool turret Kitagawa 12-inch hydraulic 3-jaw chuck Tailstock Machine weight: 7,500 kg Includes various turret-mounted tool holders, 4 driven tool holders, and additional accessories. Accessories: 4 driven tools Mazak tool holders Chip conveyor

Condition: new, Year of construction: 2024, Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Technical data for the shelf trolley: Manufacturer: LPR Type: 600 01x Shelf trolley, new Material color: blue / orange Total height incl. castors: 2,150 mm Total width: 1,550 mm Total depth: 600 mm Number of levels: 03 pcs. Consisting of each: 02x shelf uprights, new Material color: blue Frame profile dimensions: 50 x 50 mm incl. cross and diagonal braces, metal base plates, plastic Cover caps The stands are pre-assembled (bolted framework) 2,000 mm high 600 mm deep Gedpfx Ajdb N Hmod Uotw 06x workbench crossbars, new Material color: orange Design: stepped crossbar Clear width: 1,450 mm Profile dimensions: 80 x 50 mm Shelf load 300 kg with evenly distributed load 12x safety pins, new To secure the length supports against unintentional lifting out 03 x insertion sockets, second choice used Thickness: 22 mm Dimension: 1,430 x 545 mm 02x double-stop swivel castors, new 02x swivel castors, new 08x machine screws: M8 x 20 mm 08x Nuts: M8 08x washers: The pictures serve to illustrate the material. The material color may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days. Our services at a glance: (Prices on request) - Assembly and installation Our general assembly conditions must be observed - Shelf inspection Rack inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all racking systems - Delivery with our own fleet of vehicles (without unloading)

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts (checked and/or replaced) Wheelhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced, adjustments made. Newly painted. Workhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, belts replaced. New spindle bearings. Newly painted. Tailstock: Disassembled, inspected, overhauled. Gtedpjw U Ry Nefx Ad Usw Hydraulics: Disassembled, motor checked, hoses replaced, defective and worn parts replaced. Hydraulic block checked. X-axis: Disassembled, all worn parts such as O-rings, seals, segments, etc. replaced, hydraulic piston overhauled, table ground. Z-axis: Disassembled, table ground, worn or defective parts replaced, hydraulic piston overhauled, newly painted. Electrical cabinet: Completely checked, various relays replaced. Paintwork: Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer's protocol. Various accessories checked and cleaned. Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2,200 kg Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS Nominal distance between centers: 600 mm Max. distance between centers (with extended headstock): 750 mm Center height, standard: 125 mm Center height with interchangeable pads for heads: 175–250 mm Max. workpiece diameter (125 mm center height): 250 mm Max. workpiece diameter with interchangeable pads: 350–500 mm Swiveling range of table in each direction: 10° Max. grinding length for flat surfaces (max. width = 200 mm): 900 mm Continuously variable hydraulic table speed: up to approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for external grinding, diameter - width - bore: 400x50x127 mm Grinding wheel for flat surface grinding: 250x13x76 mm Wheelhead spindle speed: 1,500/1,700/2,200/3,600 rpm Wheelhead swiveling range: 270°, with indexing every 90° Vertical travel of wheelhead, center height: 125–350 mm Transverse travel of wheelhead: 285 mm Hydraulic rapid traverse stroke: 40 mm Intermittent infeed of wheel by table reversal: 0.001–0.03 mm/dia Continuous infeed for plunge grinding: 0–0.9 mm/dia Micrometric infeed stop, by division: 0.001 mm/dia Workhead swiveling range: 360° Workhead spindle speed, stepless: normal/special: 20–400 / 10–400 rpm Internal taper of workhead/tailstock: Morse 5/3 Wheelhead motor: approx. 4 HP All technical specifications are given without obligation and subject to errors or omissions.

Year of construction: 2008, condition: ready for operation (used), Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible. Gtedpfxeuyk N Io Ad Uew

Condition: refurbished (used), Year of construction: 2020, machine/vehicle number: PM_1000, Used polishing machine for manual processing. Drive power 5.5 kW Gtodpfofiugujx Ad Uew Polishing discs diameter - 1000 mm