Base for bending tool 4200 mm

Promecam STPC 250 40 121

Condition: good (used), Hydraulic control block for hydraulic pump, hydraulic unit, control block, hydraulic control block, control unit, control valve, servo valve Prodjhqifyspfx Abpsa -Manufacturer: Promecam, hydraulic control block from press brake Promecam STPC 250 40 121 -Control valve: Abex Denison S16-92489 / S16-39303 / S26.20456 2-way cartridge valves: Bosch Individual components: type / number see photos -Dimensions: 875/560/H400 mm -Total weight: 204 kg

Condition: used, mileage: 19,950 km, first registration: 11/1989, fuel type: diesel, axle configuration: 4x4, gearing type: mechanical, Year of construction: 1989, Equipment: all wheel drive, Mercedes-Benz 1428 AF 4x4 (central and rear axle locks, low-range gearing) with 7 seats Podpfxefarx Ue Abpora Water tank: 2,500 liters Pump: Metz, with a flow rate of 2,800 l/min Additional equipment: quick attack connection on the right side with a 50-meter hose Dimensions (LxWxH): 7100 x 2300 x 3000 mm Wheelbase: 3800 mm Tires: 275/70 R22.5

Year of construction: 2002, condition: used, Balpe SAS Prsdpfxjb Uanqs Abpja model: 9PL/20 serial: 88 Stainless, 9 electrically heated angled plate with, 200mm diameter, adjustable temperature.

Year of construction: 1978, condition: used, pressure 100 t throat 380 mm Pjdjlp U Dpjpfx Abpjra stroke 400 mm power capacity 22 kW dayligth 600 mm ram surface 600x500 mm table surface area 720x600 mm weight of the machine ca. 9 t

Condition: used, pressure 160 t passage width / mm stroke / mm Working height 800 mm total power requirement 15 kW weight of the machine ca. 11,8 t - Table size: 1000x1000mm - Distance table/ram, large stroke above, gain. above: 800mm extra information Pjdpfjiulkqox Abpera Removable table

Condition: new, empty load weight: 5,500 kg, overall weight: 19,500 kg, axle configuration: 1 axle, loading space length: 11,800 mm, loading space width: 2,550 mm, loading space height: 1,100 mm, suspension: air, tire size: 215 75 17,5, Equipment: crane, 1x SAF or BPW axle Total weight: 19,500 kg Payload: 14,000 kg Empty weight: 5,500 kg Total length: 12,800mm + 1500mm Brake system: Wabco 2S-2M Electrical system: Aspöck Systems Air suspension Hydraulic rear extension in full width 2550mm and length 1500mm Semi-trailer completely galvanized / galvanized (100% galvanized / 100% galvanized) Tire size: 215/70 R 17.5 Prodpekqmuujfx Abpja Tire brands: Pirelli, Goodyear, Fulda, Continental. 5th Wheel Height: approx. 1050mm - 1150mm (other saddle heights also possible) Hydraulic winch 8ton with remote control with pulleys 24v 4.5KW electro-hydraulic motor Steel ramp: 2 pieces Changes possible according to customer requirements Painting freely selectable / free of charge All documents COC, Tüv, etc. available for approval.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Pressure: 225 t Bending length: 4050 mm Podpfxeyz S Ngs Abpera Control: DA 69 TW Oil capacity: 400 l Total power requirement: 17 kW Machine weight approx.: 18,100 kg Dimensions: 5700 x 2610 x 3300 mm

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 100 kg, power: 88 kW (119.65 HP), temperature: 220 °C, heating capacity: 30 kW (40.79 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 500 mm, insulation material: Steinwolle, insulation thickness: 150 mm, workpiece width (max.): 500 mm, Semi-automatic powder coating system | Batch system with chemical pre-treatment & curing oven Compact, semi-/partially automatic batch powder coating system for steel components (1,500 x 500 x 500 [mm]). Complete system including 2-chamber spray tunnel (degreasing/phosphating/rinsing), flash-off oven, mobile powder spray booth, curing oven (max. 220°C), cardan chain conveyor, and PLC control. New system / project proposal – special dimensions, heating types, layouts, etc. can be individually adapted to customer requirements. System concept & customer-specific customization: Semi-automatic powder coating system in batch mode for the efficient coating of steel parts. The system combines a compact footprint with high throughput and is ideal for small to medium-sized series components. The pre-treatment process is automated in batch mode, and the coating is applied manually. Note on design: The dimensions, assemblies, and heating types listed below correspond to the indicative offer presented. All components (e.g., useful lengths, booth dimensions, chain path, gas instead of electric heating) can be fully customized to your specific component dimensions, space requirements, and process requirements. - Max. component dimensions (standard indicative offer): 1,500 x 500 x 500 [mm] (variable) - Max. load capacity per carrier: 100 kg per batch (higher load capacities on request) Psdpfsulwg Njx Abpora - Space requirement / footprint: approx. 12,000 x 6,500 [mm] (layout can be flexibly adapted) - Total connected load: approx. 88 kW (max.) - Batch cycle time / feed rate: Batch dwell time approx. 8.5 - 12 min at a chain speed of 3.2 m/min Technical data (overview of indicative project) System type: Semi-automatic batch system Max. workpiece size: 1,500 x 500 x 500 [mm] (individually scalable) Load capacity / carrier: 100 kg (higher loads can be designed) Oven temperature: max. 220/250°C; operating temperature 180-200°C Heating for dryer/oven: Gas, oil, or electric (indirect) Max. power consumption: 88 kW (depending on system size) Control: PLC (e.g. Siemens) System components overview: Chemical pre-treatment (3-zone spray cleaning): Compact 2-chamber spray tunnel made of stainless steel for degreasing/phosphating (or alternatively nanoceramic) (40 - 45°C) as well as 2-stage rinsing. Complete with stainless steel pumps, PPR nozzle bars, and extraction (4,000 m³/h). Flash-off oven & powder curing oven: Two thermally insulated chambers (100 - 150 mm rock wool) with indirect electric heating (thermoblock with 16 or 30 kW), stainless steel combustion chambers, and powerful air circulation. Dryer up to 120°C, oven up to max. 220/250°C (automatic lift-up doors optional) Mobile powder spray booth: Mobile, open coating booth (2,000 x 2,100 x 2,200 [mm] with ATEX extraction (6,000 m³/h). Integrated filter unit with 4 pulse valves for cleaning, absolute after-filter, and mobile 60 l powder container. Note: Fully enclosed powder booths are also available! Conveying technology & control: Driven cardan chain conveyor with frequency inverter and automatic lubrication unit. Control via PLC for complete control and adjustment of all system processes (control cabinet equipped with Siemens/Schneider) Scope of supply: Complete system including customer-specific design, assembly, and on-site training.

Condition: excellent (used), Rotary vane vacuum pump Manufacturer: Edwards Type: E1M275 Includes: Oil filling Condition: very good (The pump will be tested, cleaned, and serviced before delivery) Prjdpfehmkcnsx Abpea Warranty: 3 months

Condition: like new (used), functionality: fully functional, power: 17.5 kW (23.79 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 40 l, color: green, overall weight: 5,600 kg, maximum load weight: 3,830 kg, lifting height: 20,700 mm, drive condition: 95 %, number of seats: 1, emission class: euro5, Year of construction: 2024, operating hours: 121 h, Equipment: additional headlights, adjustable boom, crane, low noise, tilting carriage, === KEY SPECIFICATIONS === Year: 2024 Working hours: 121 h Max. lifting capacity: 3,830 kg Max. lifting height: 16.8 m (20.7 m with fly jib) Max. working radius: 16 m Drive: Diesel Remote control: Yes Jib: Optional (fly jib available) Attachments / extras: Hook block, searcher hook (optional) Track type: Rubber tracks Track condition: Good Operating weight: 5,600 kg CE certified: Yes === HIGHLIGHTS === Carefully selected machine with verifiable history CE certified with full documentation available Ready for immediate use and transport Equipped with remote control for precise operation Advanced safety systems for safe and efficient work Compact spider crane – ideal for restricted access areas === CONDITION === Excellent working condition – fully inspected, serviced, and tested All functions operate correctly Pedpsyvrt Usfx Abpsra Inspection available upon request === LOCATION & PRICE === Located in Sittard, Netherlands Worldwide delivery available Price €127,500 (EXW / excl. VAT) === DESCRIPTION === Reliable Maeda MC405C-3 spider crane from 2024 with only 121 working hours. This compact mini crane combines high lifting performance with excellent maneuverability, making it ideal for indoor applications, construction sites, glass installation, and confined spaces. With a maximum lifting height of up to 20.7 meters (with fly jib) and a lifting capacity of 3.8 tons, this machine delivers strong performance within a compact footprint. Fully inspected, CE certified, and ready for immediate deployment. === DELIVERY === Crane loading available upon request Flexible shipping options tailored to your destination Transport handled by Collé Rental & Sales