Folding Machine

RAS 69.20

Condition: good (used), total length undivided: 3000 mm Nwjdpfjhwwfxex Akfsf edge heigth: 90 x 90 mm

Condition: good (used), Year of construction: 1980, machine/vehicle number: 27-3, Offer 23317 Nwjdpjrklfrofx Akfef Technical data: - max. working width 2040 mm - max. material thickness at 40 kp / mm² strength 3.5 mm - Bending angle setting electronically preselectable 0 - 135 ° - smallest bending radius 1.25 x sheet thickness - Smallest inner flange height 6 x sheet thickness - Automatic sequence control for a complete work process - Operation via hand or foot switch - largest opening width / stroke of the upper beam 200 mm - Height adjustability - of the bending beam 80 mm - of the lower beam 80 mm - Upper beam drive 400 V / 1.1 kW - Bending beam drive 400 V / 1.5 kW - Manual backgauge can be operated from the front - Space requirement approx. W 3300 x H 1350 x D 1500 mm - Weight approx. 2600 kg

Condition: new, sheet width 1270 mm plate thickness 2,0 mm distance between columns 1300 mm daylight opening 48 mm 135 ° total power requirement Handbetrieben weight of the machine ca. 0,4 t dimensions of the machine ca. 1,6 x 0,9 x 1,2 m Nwjdjupxcgjpfx Akfof Segment-bending machine Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 260mm.

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Nwsdpfxew Rm Sao Akfsf Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: new, Finger setter with segmented top clamp PNEUMATIC CYLINDER !!! Max. bending capacity over the entire working length ----- 1.5 mm Max. working length ----- 1500 mm Max. opening width ----- 48 mm Width of fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 2x 250 | 275 mm Max. angle of attack ----- 0 - 135 Weight ----- 430 KG Width ----- 1820 mm Depth ----- 850 mm Height ----- 1175 mm Nwsdpoga T Dljfx Akfef

Condition: used, Year of construction: 1984, machine/vehicle number: 220-3, Ref. No. 25304 Technical Data: - Machine for producing longitudinal seams on the edges of square or rectangular long ducts - Number of roller shafts with seam rolls: 15 pcs - Material thickness: from 0.5 to 0.63 mm - Duct dimensions: from 80 x 80 mm up to 100 x 100 mm - For duct dimensions from 100 x 100 mm - Material thickness: 0.5 to 1.0 mm Nwjdpfx Asw U Rb Hokfof - Feed speed: 15 m/min - Pneumatic connection - Drive: 400 V / 3 kW - Includes: - Foot switch - Duct guide plates - Separate lubrication system - Space requirements: approx. W 5400 x H 1200 x D 800 mm - Weight: approx. 950 kg

Condition: used, Excellent welding quality with advanced processes and capabilities • New inverter generation with 30% lower power consumption compared to conventional devices. This performance results in significant energy cost savings. • Over 100 synergy curves for almost all base materials (factory-equipped) • Wide process variety: Nsdpowwtwdjfx Akfewf - MIG/MAG Standard - MIG/MAG Pulse - MIG/MAG Special Arc Types - MIG Brazing - Manual Metal Arc Welding (basic, rutile, cellulosic) - Gouging with up to 8.0 mm electrode diameter • High-performance machines with up to 500 A at 60% duty cycle • Automation interface A1, no additional cards required for simple, analog integration • 99 memory slots • Password-protected parameter locking (fine adjustment within +/-20% still possible) • Program selection via torch button • Simple polarity change

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, mobile circular saw for cutting bricks with extraction Nsdev Ivx Topfx Akfswf

Condition: used, functionality: unexamined, Year of construction: 2015, machine/vehicle number: 6233, Technical data: Maximum sheet thickness (sheet steel) 3mm Maximum sheet thickness (chrome steel) 2mm Maximum sheet thickness (aluminum) 4mm Maximum bending length 3200mm Maximum four-sided bending part height 300mm Minimum base area of a finished bent part 185mmx210mm Nwsdpfjvxz Tqex Akfjf Upper beam stroke 650mm Maximum bending beam travel distance 150mm Positioning accuracy of PosLift stop system 0.01mm Working height 1000mm Machine width with PosLift stop system in rectangular shape approx. 3000mm Machine width with PosLift stop system in J-shape approx. 4700mm Machine length approx. 6700mm Maximum machine height approx. 2600mm Net weight approx. 13000kg Air pressure 5.5 bar Total drive power 14kW Speeds: Bending beam 140°/s Upper beam 95mm/s

Condition: good (used), Year of construction: 1981, machine/vehicle number: 3060, Offer 26028 Technical Data: Nedoyfd Hkjpfx Akfswf - Max. working width: 3040 mm - Max. material thickness (ST 37): 4 mm - Bending process selectable as fully automatic or semi-automatic operation - Bending angle electronically selectable: 0 - 135° - Max. stroke height of upper beam: 350 mm - Stroke height of upper beam electronically adjustable - Adjustment: - of bending beam: 125 mm - of lower beam: 125 mm - Upper beam drive: 400 V / 4.0 kW - Bending beam drive: 400 V / 5.5 kW - Electric foot switch - Backgauge rail - Segmented gooseneck tool - Space requirement approx.: W 3950 x H 1600 x D 1200 mm - Weight approx.: 4800 kg