RBO panel stacking and offloading

RBO

Condition: used, machine/vehicle number: 007357, Position 1: Panel Feeding and Loading BIESSE - RBO-STREAM SB2 9.5 Position 2: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB2 9.5 Position 3: Panel Turning Device BIESSE - RBO-STREAM SB2 9.5 Nsdewuz Rtepfx Aqvelb undefinedPosition 5: Panel Turning Device BIESSE - RBO-STREAM SB2 9.5 Position 6: Panel Stacking and Offloading BIESSE - RBO-STREAM SB2 9.5

Year of construction: 1980, condition: good (used), Offer 22501 Technical data approx: - max. working width 1020 mm - max. material thickness at 40 kg/mm² strength 1,5 mm - man. backgauge adjustable up to 550 mm - front angle stop - sheet holding-down device - table size 1100 x 650 mm - working height 900 mm - space requirement approx. W 1800 x H 1450 x D 850 mm - weight approx. 400 kg Nedpfxekzik Hj Aqvslb - mobile

Condition: used, machine/vehicle number: 006107, Position 1: Panel Feeding and Loading RBO-WINNER C Position 2: Panel Turning Device RBO-WINNER C Position 3: Panel Turning Device RBO-WINNER C Nlsdpfxswuch To Aqvob Position 4: Panel Stacking and Offloading RBO-WINNER C

Condition: used, machine/vehicle number: 007811, Position 1: Panel Feeding and Loading BIESSE - RBO-STREAM SB Nledpfx Aqjv Dyxcsvob Position 2: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB Position 3: Panel Turning Device BIESSE - RBO-STREAM SB Position 4: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB Position 5: Automatic Drilling Machine BIESSE - RBO-STREAM SB Position 6: Automatic Drilling Machine BIESSE - RBO-STREAM SB Position 7: Panel Turning Device BIESSE - RBO-STREAM SB Position 8: Panel Stacking and Offloading BIESSE - RBO-STREAM SB

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Nljdpju Damdofx Aqvob

Condition: ready for operation (used), Year of construction: 1996, machine/vehicle number: 960044/2, functionality: fully functional, input frequency: 50 Hz, overall weight: 1,600 kg, year of last overhaul: 2026, Equipment: CE marking, Available: RBO Transfer machine, year 1996, a robust and reliable industrial machine, immediately ready for use. Key features: CE marking Perfectly functional Robust structure and high-quality industrial construction Nljdpfx Asy S Ua Ajqvsb Complete with 5 discharge tables Ideal for continuous production and intensive operations This machine is suitable for companies that require an immediate solution, without downtime and without further investment in major overhauls. Condition: excellent – ready for production Available for inspection by appointment Dismantling and transportation are the responsibility of the buyer Attractive price, negotiations are confidential.

Condition: used, machine/vehicle number: 007684, Max. panel width: 1200 mm Max. panel length: 3000 mm Max. panel stack height from the ground: 1800 mm Movement system: suction cups. Njdpfey Nkttex Aqvjlb

Condition: ready for operation (used), Year of construction: 2005, A Hennecke HK135 high-pressure polyurethane foaming system with four 25000l mixing tanks, a casting robot and two release agent robots is available. Capacity: 225t/24h, tool carriers: 42, mixing positions for additive mixing: 10, mixhead type: MQ, max. working pressure: 180bar, pressure tank: 330bar. Foam types: Rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid filling foam, cold-curing flexible foam, hot-curing flexible foam. Multiple mold foaming is possible. Complete documentation available. On-site inspection is possible. Nlsdjttbd Nspfx Aqvjb

Condition: used, machine/vehicle number: 008411, Max. panel width: 1200 mm Nodpfx Asyngy Ejqvolb Max. panel length: 2700 mm Rotation system: double cone Rotation direction: from long to transverse

Condition: good (used), Dimensions 7300x1250mm Dimensions of table no. 1: 4500x1250 mm Engine power 0.75kw Dimensions of table no. 2: 2800x1200 mm Engine power 0.75kw Max. load: 200 kg Adjustable height: 800-1150 mm Nljdperu Df Sjfx Aqvob Made in Denmark Weight 650 kg Transport dimensions 4600x1650x2000 mm Price 4500Eur (EXW Jonava, Lithuania) Note: It is possible to integrate machines between the conveyors (for example grinding machines)

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Nedpfx Aofi Tg Hsqvolb Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Year of construction: 2004, condition: not inspected (used), functionality: unexamined, plate length: 3,000 mm, plate width: 1,200 mm, stack height: 1,600 mm, TECHNICAL DETAILS Maximum panel width: 1,200 mm Maximum panel length: 3,000 mm Nljdjyxnquopfx Aqvob Maximum stack height from floor: 1,600 mm EQUIPMENT Motion system: Suction cups Vacuum pump The machine is sold and delivered in its actual and legal condition ('as seen and approved'), based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and is responsible for installation, securing, and use of the machine at the destination. External reference: 7684

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, RBO Portal Feeding System Advantage SC, Year 2006 Njdpfoywfi Sex Aqvolb The machine offered is being sold as a second-hand unit. The sale is made to the exclusion of any liability for material defects. The machine is sold as inspected and under exclusion of any warranty. The seller provides no guarantee regarding functionality, performance, or suitability for any specific purpose. Disclaimer All liability for material defects is excluded. This does not apply to damages resulting from injury to life, body, or health, or in cases of intentional or grossly negligent conduct by the seller. Dismantling and Transport Dismantling of the machine is to be carried out by the buyer at their own responsibility and expense. The buyer bears all costs and risks associated with dismantling, loading, and transport. Transfer of Risk The risk passes to the buyer no later than at the start of dismantling or loading. Miscellaneous No liability is assumed for hidden defects. All information about the machine (e.g. year of manufacture, operating hours, technical data) is provided to the best of our knowledge, but without guarantee.

Condition: used, Year of construction: 2004, Sato cutting machine for sale Nlodjvx N I Nepfx Aqvjb

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and DOWELS INSERTING LINE Min/Max workpieces (panels) width (X axis) with FTT: mm 240 / 3100 Min/Max workpieces (panels) thickness (Z axis) with FTT: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with FTT: mm 140 /1550 (or 800+800) A) Motorized Roller table "RBO" with 90° conveyoring belts Njdpjyhqa Ajfx Aqvelb B) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" FTT 800 slot A: No. 2 vertical Electro-spindles ISO 30 (Kw 4.5 each) with 2 tool-holder stores 3 places each (tot. 6) slot B: No. 2 predispositions for the installation of other 2 electro-spindles No. 4 upper drilling units (4x32 = total 128 vertical spindles + 4x4= tot. 16 horizontal spindles in Y-axis) No. 2 drilling spindles stores/magazines (revolver) with 60 positions each (total 120) C) Connection system, with up-side-down turning machine (180°) "RBO" Mod. Ribaltatore D) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" Mod. FTT 800 R8 No.2 horizontal units (1 left+1 right) with 4x BH18 heads with 18 spindles each (36 right + 36 left) total 72 slot A: No. 2 vertical Electro-spindles ISO 30 (Kw 4.5 each) with 2 tool-holder stores 3 places each (tot. 6) slot B: No. 2 predispositions for the installation of other 2 electro-spindles No. 4 upper drilling units (4x32 = total 128 vertical spindles + 4x4= tot. 16 horizontal spindles in Y-axis) No. 2 drilling spindles stores/magazines (revolver) with 60 positions each (total 120) E) "BIESSE" RD dowels insertion machine No.2 horizontal units (1 right+1 left) with 5 insertion nozzles each (5 left + 5 right), total 10 nozzles F) Brush-cleaning machine "WANDRES"