Conveying Machinery

Renholmen

Year of construction: 1996, condition: ready for operation (used), functionality: fully functional, Renholmen greensorting line 45 sorting pockets, sticking machine with sticks handling and Finnscan + OT-laite, speed is 100 m/min and it is fully automated line with stickhandling one operator, automation is made 2019 Workpiece length max - 6.100 mm Isdpoxg Rgxsfx Adwstb

Year of construction: 2018, condition: new, Permanent overband magnetic separator TYPE PEM2200 2200 x 1000 x 400mm ===== 4x eyebolt for suspension Itedpfx Ajd Dy S Dedweb Rubber band GB30 Magnetic dimensions: 1200x500mm

Year of construction: 2005, condition: used, HIT mechanization for KVH and BSH production for components up to width 600 mm, height 300 mm, length 18 m consisting of different parts to be delivered individually or completely - layer cross pusher - various cross conveyors - workpiece roller conveyors - heavy duty roller conveyors Iodpfx Adspiurmjwstb - 5 lifting tables with 2 cross conveyors each mounted on traversing carriages - stacker - control cabinets - Roller rails - Travelling binder cut-off saw with waste disposal system

Condition: new, IMH-OBC-Optimized block saw Cuts blocks for four-way pallets. How does the machine work? The block material is loaded onto the chain conveyor and transported to the pusher, which feeds it to the cutting zone. The block material is measured by the machine before cutting and it also calculates which lengths need to be cut in order to optimize usage and produce no waste (or as little waste as possible). The machine can process 4 different block lengths in the same pass and each block can be optimized separately. Optionally, the machine can be equipped with a double drive, which enables the simultaneous processing of two different block materials. block materials at the same time. The feed chain and the circular saw blade are driven by a standard electric motor, while the linear module is driven by an AC servo for optimum performance and precision. The measuring arm, the material holder in the saw and the air blower are pneumatically operated. The machine is controlled and monitored by its own PLC via a control panel. The machine is designed for continuous and reliable processing of pallets. It combines professional precision with a user-friendly set-up. Changeover time 1-5 minutes Block length 75 mm* 45 blocks / min * Block material length 3 900 mm or longer. Block: 75-150 x 75-150 x 75-100 mm ( length x width x height ) Squared timber material: Itjdpfx Adsrkk Udjwsb 800-5800 x 75-150 x 75-100 mm ( length x width x height ) This machine is available in different versions. IMH has various additional machine modules that can easily be added to existing machines to achieve a higher degree of automation. This is just one example of the many possibilities that can be realized with IMH machines. Since 01.01.2024 we have taken over the exclusive representation for IMH machines in Germany. The range includes high-quality machines for pallet production that are known for their quality and reliability. Please contact us to find out more about IMH machines or to arrange a personal consultation. Gebrüder Göbel - your partner for IMH machines in Germany. We look forward to supporting you with your projects!

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Ijdpfx Aev Si Szsdwetb Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: refurbished (used), Wood waste and bark shredder ERJO. Completely renovated. Yan knives and counter knives installed. Iedsl Sli Dspfx Adwjtb

Condition: new, Swedabo AB offers new machinery: Tilt Hoist THx1, electric operated Tilt Hoist system. Durable design for high speed and simplicity. Ready to unstack up to 20 layers of boards per minute. Available various number and spacing of arms. Permissible total lifting weight depends on number of arms. Iodpfx Asiyzt Eedwetb Specification: - Feed (machine) speed: up to 20 layers/min Lift capacity: 3 tons; - Package, max (WxHxL): 1100x1100x5400 Board thickness: 16..120 mm; - Board width: 50..250 mm; - Board Length: 1,8..5,4 m; - Motor (Lift): 3 kW, 230/400V, 50 Hz, with brake; For more options or information, feel free to contact us!

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Stable roller conveyor with hydraulic lifting and lowering cross conveyor. Iodst A U Dyopfx Adwstb Conveyor length to stop 6.0 m. Total length 7.10 m. Roller length 1,600 mm. Roller diameter 200 mm. Built-in lifting and lowering cross conveyor with 6 chain strands, can be raised and lowered hydraulically. Completely re-stored before decommissioning.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, WORKING DIMENSION 250x150 mm MILLING MOTOR 50 HP HYDRAULIC POWER UNIT MOTOR 20 HP Itedpfxjw E Etyj Adwsb PUSHING FORCE 40T MAXIMUM WORKING SECTION 250x150 mm EXIT ROLLER CONVEYOR NOT INCLUDED

Condition: used, Year of construction: 2018, Marel concept 500 labelling machine Itjdpfxov Sp Ebj Adwsb - top and bottom labelling machine